SmartElex TEMT6000 Ambient Light Sensor Breakout

7Semi UCC21220 Dual-channel Isolated Gate Driver Breakout The 7Semi UCC21220 Dual-Channel Isolated Gate Driver Breakout is a high-performance isolated gate driver module designed to provide safe and efficient driving of power MOSFETs and GaN FETs in modern power electronics systems. Many microcontrollers and control boards cannot directly drive high-voltage gates or handle fast switching signals without isolation; this board solves that by offering galvanic isolation between the control logic and the power stage. This ensures reliable operation, protects sensitive components, and reduces noise interference in demanding applications. Featuring dual channels with robust isolation and wide input ranges, this breakout simplifies the implementation of isolated MOSFET gate driving in converters, inverters, motor drives, and power supplies. Its compact design and ease of integration make it suitable for students learning power electronics, hobbyists building advanced projects, and professionals developing prototypes or industrial systems. With strong performance and reliable protection, it helps improve overall system efficiency and safety wherever isolated high-speed switching is needed. Features: Advanced basic and functional isolation for safe and efficient power transfer Fast and precise switching with 40 ns max propagation delay, 5 ns delay matching, and low pulse-width distortion High output drive strength with 4 A peak source and 6 A peak sink capability Built-in protection features including UVLO, active pulldown, and input transient rejection Supports high-side, low-side, and half-bridge configurations Ideal for driving MOSFETs and GaN FETs in demanding power applications

7Semi PCA9306 I2C Bidirectional Voltage Level Translator Breakout Board The 7Semi PCA9306 I2C Bidirectional Voltage Level Translator Breakout Board is a compact and efficient PCA9306 voltage level translator designed to safely interface I2C and SMBus devices operating at different logic levels. Supporting voltage translation from 1.2V to 5.0V, this board enables seamless communication between low-voltage sensors and higher-voltage microcontrollers without manual direction control. As a dependable I2C logic level converter, it delivers minimal signal delay and stable bidirectional data flow, making it ideal for robotics, industrial controllers, embedded systems, and DIY electronics projects requiring precise mixed-voltage I2C communication. Allowable Voltage Level Translation The breakout can transfer voltages ranging from 3.3V to 5V. VREF1 (Low Side) VREF2 (High Side) 1.2V 1.8V, 2.5V, 3.3V, 5V 1.8V 2.5V, 3.3V, 5V 2.5V 3.3V, 5V 3.3V 5V Features: Wide Voltage Range Support: Operates between 1.2V and 5.0V, accommodating a wide range of components. Dual Bidirectional Channels: Translates both the SDA and SCL lines for complete I2C compatibility. I2C and SMBus Protocol Support: Fully compatible with regular and fast-mode I2C devices, as well as SMBus peripherals. No Direction Pins Required: Signal direction is automatically detected for easier design. Low propagation delay: A delay of less than 1.5ns maintains data integrity at high speeds. 5V Tolerant I/O Ports: Securely links 5V signals to lower voltage devices. Compact and simple to use: ideal for embedded applications, prototyping, and compact systems.

SmartElex Micro ISM330DHCX 6DoF IMU Sensor The SmartElex Micro ISM330DHCX 6DoF IMU Sensor is a compact motion-sensing module that combines an accelerometer and gyroscope to measure movement, orientation, and rotation. It helps users track motion data accurately in three-dimensional space, making it useful for students, hobbyists, engineers, and educators working on robotics, automation, and motion-based electronics. This IMU breakout board simplifies motion tracking in projects where stability, responsiveness, and precision are important, without requiring complex circuit design or calibration setups. This 6DoF IMU sensor is commonly used in self-balancing robots, gesture-controlled systems, IoT wearables, drones, and embedded automation projects that rely on movement or orientation feedback. It integrates smoothly with popular development platforms like Arduino, Raspberry Pi, and ESP32, making setup and data processing beginner-friendly and efficient. With dependable performance and straightforward compatibility, the SmartElex Micro ISM330DHCX is a practical choice for prototyping, academic learning, and product development where reliable motion tracking and sensor fusion are essential. Features: 6DoF IMU with built-in accelerometer and gyroscope for motion tracking Measures linear acceleration and rotational movement in real time Compact breakout board designed for easy integration in projects Compatible with Arduino, Raspberry Pi, ESP32, and similar platforms Ideal for robotics, drones, wearables, and gesture-based control systems Reliable module for prototyping, STEM learning, and embedded development

SmartElex BX404 Digital PIR Motion Sensor The SmartElex BX404 PIR Motion Sensor is a compact and reliable BX404 PIR Motion Sensor designed to detect human movement using passive infrared technology. It helps users sense motion accurately by detecting changes in body heat, making it useful for security, automation, and energy-saving applications. This passive infrared sensor is ideal for students, makers, educators, engineers, and startups looking to add motion detection to their electronic projects in a simple and effective way. The sensor works smoothly with popular platforms such as Arduino, Raspberry Pi, and ESP32, allowing easy integration into robotics, IoT devices, and automation systems. Its stable digital output makes it suitable for applications like smart lighting, intrusion alarms, occupancy detection, and DIY prototypes. With easy interfacing and dependable performance, this sensor enables quick development of motion-based solutions for real-world electronics projects. Features: Accurate motion detection using passive infrared sensing Designed for reliable human movement detection Digital output for easy interfacing with controllers Compatible with Arduino, Raspberry Pi, and ESP32 Low power operation for continuous monitoring Ideal for security, automation, and smart electronics projects

7Semi MCP4728 Quad DAC Module The 7Semi MCP4728 Quad DAC Module is a compact and reliable DAC module designed to convert digital signals into precise analog voltage outputs. Based on the MCP4728 IC, this digital-to-analog converter breakout board allows users to generate up to four independent analog outputs using simple I²C communication, making it an efficient solution for applications where microcontrollers lack sufficient analog output pins or require higher accuracy. This module offers easy integration with popular microcontrollers, stable performance, and flexible voltage output control, making it ideal for signal generation, sensor simulation, audio control, and calibration tasks. With its user-friendly design and dependable operation, it is well suited for students learning embedded systems, hobbyists building DIY electronics, and professionals developing prototypes or compact analog control systems. Features: Powered by the Microchip MCP4728 Quad DAC IC 12-bit resolution on all four DAC output channels (A–D) Onboard non-volatile EEPROM retains DAC settings after power-off I²C interface with Fast Mode support up to 400 kHz Low-power operation, ideal for battery-powered projects Compact 7Semi breakout with clearly labeled pinouts Supports LDAC and RDY pins for real-time DAC updates and monitoring Applications: Signal generation (sine, square, and triangle waveforms) Audio voltage control for synthesizers and mixers Programmable and adjustable reference voltage sources Lab instruments, testing, and control systems Industrial automation and process control applications Multi-channel analog and neural interface testing

7Semi BMA400 3-Axis Digital Accelerometer Breakout Board STEMMA QT / Qwiic The 7Semi BMA400 3-Axis Digital Accelerometer Breakout Board STEMMA QT / Qwiic features the highly precise BMA400 3-axis accelerometer, delivering accurate 3D acceleration measurements with 12-bit digital resolution and 0.001g sensitivity. Supporting selectable measurement ranges of ±2g, ±4g, ±8g, and ±16g, this ultra-low power sensor can detect tilt, orientation, tap/double-tap, and perform step counting with activity recognition—making it perfect for wearable devices and battery-sensitive applications. Its Qwiic/STEMMA QT connector allows effortless plug-and-play integration, while dual power support (3.3V/5V) and flexible I2C/SPI interfaces ensure compatibility with a wide range of microcontrollers. With two configurable interrupt pins and a compact design, this breakout board is ideal for robotics, motion sensing, vibration monitoring, and other STEM projects requiring precise and reliable acceleration data. Features: 3.3 and 5 volt power supply I2C and SPI communication, with 2 interrupt pins. Digital resolution: 12 bits. Measurement range: +- 2g, 4g, 8g, 16g. BMA400 3-Axis Digital Accelerometer Breakout Pinouts:

SmartElex MicroB USB Breakout Board The SmartElex MicroB USB Breakout Board is a compact adapter board designed to make it easy to access the pins of a Micro-B USB connector for prototyping, development, and testing. It breaks out the USB port into simple pin headers, allowing users to interface USB power and data lines with custom circuits, breadboards, and microcontroller boards. This USB breakout board is ideal for students, makers, educators, and engineers who need a quick and reliable way to add USB connectivity to their electronics projects without designing a custom PCB. This board is commonly used in robotics, IoT applications, embedded system development, device repair, and hardware prototyping where USB access is required for powering circuits or transferring data. It works smoothly with platforms like Arduino, Raspberry Pi, and ESP32, enabling fast integration with both beginner and advanced projects. With its straightforward layout and sturdy connector design, the SmartElex MicroB USB Breakout Board is a practical and efficient choice for workshops, prototyping labs, and DIY electronic builds that require stable Micro-B USB interfacing Features: Micro-B USB connector broken out to easy-to-use header pins Simplifies USB power and data access for prototyping and testing Supports quick integration with breadboards and custom circuits Compatible with Arduino, Raspberry Pi, ESP32, and microcontrollers Ideal for DIY repairs, IoT projects, and embedded hardware development Compact and beginner-friendly design for rapid project setup

SmartElex Hall Sensor The SmartElex Hall Sensor is a compact electronic component designed to detect magnetic fields using the Hall effect. It helps sense the presence, strength, or change in magnetic fields without physical contact, making it useful for reliable and wear-free detection. This sensor is suitable for students, makers, engineers, educators, and startups who are working on electronics projects that require accurate magnetic field sensing, position detection, or rotational speed measurement. This hall effect sensor is widely used in robotics, IoT devices, automation systems, and general prototyping applications. It can be easily interfaced with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick integration into both learning projects and real-world systems. Common use cases include motor speed sensing, position detection, proximity sensing, and safety switches, where consistent performance and simple integration are important. Features: Detects magnetic fields using the Hall effect principle Contactless sensing for reliable and wear-free operation Fast response suitable for speed and position detection Digital/analog output (depending on variant) for easy interfacing Compatible with Arduino, Raspberry Pi, ESP32, and other controllers Ideal for motor control, proximity sensing, and automation projects

7Semi High-Precision Temperature & Humidity Sensor Probe The 7Semi High-Precision One-Wire Temperature and Humidity Probe is engineered for applications where accuracy, durability, and reliability truly matter. Built with advanced CMOSens sensing technology, it delivers precise digital measurements even in extreme environmental conditions. Its stainless-steel porous housing provides excellent protection against moisture, dust, and chemical contaminants, making it dependable for long-term use in demanding setups. Designed for industrial automation, scientific research, HVAC systems, and environmental monitoring, this probe offers excellent responsiveness and stability across wide temperature and humidity ranges. The one-wire interface reduces wiring complexity, while the compact form factor and 1-meter cable make installation effortless. With its industrial-grade sensing, high-accuracy performance, and rugged enclosure, this probe is ideal for both stationary and mobile applications. Features: Designed with advanced CMOSens technology to deliver highly accurate humidity and temperature readings in challenging environments. Operates efficiently at 3.3V, making it suitable for battery-powered and portable devices. Works across extreme environmental conditions, including temperatures from -40°C to +125°C and pressures up to 150 bar. Encased in a stainless-steel breathable shell that resists corrosion, dust, chemical exposure, and moisture. One-wire digital interface ensures simple integration and minimal wiring requirements. Proven reliability in high-pressure, high-temperature, vacuum, and explosive environments. Built for long service life with strong resistance to oxidation and particulate blockage. Includes a 1-meter cable with a mini round shell connector for flexible installation in tight or specialized spaces. 7Semi High-Precision Temperature & Humidity Sensor Probe Pinout Diagram:

7Semi ENS160 Air Quality Sensor I2C Probe (ES-12183) The 7Semi ENS160 Air Quality Sensor I2C Probe (ES-12183) is a compact and ready-to-use air quality sensing module built to measure indoor environmental conditions. It uses the advanced ENS160 multi-gas sensor to detect volatile organic compounds (VOCs) and other indoor pollutants, helping you understand the quality of the air around you. The probe provides clean, processed digital outputs that make monitoring easy. This sensor communicates over a standard I2C interface and works at 3.3 V, making it simple to connect to popular controllers like Arduino, ESP32, or Raspberry Pi. With features like long-term stability, low power use, and reliable performance across a range of temperatures and humidity levels, it’s a great choice for smart home systems, air purifiers, HVAC monitoring, and other environmental projects. Features: Advanced ENS160 multi-gas sensor for indoor air quality monitoring Detects VOCs and air quality levels for healthier environments I2C digital interface for simple integration with microcontrollers Factory-calibrated sensor for reliable and consistent readings Low power consumption, suitable for continuous monitoring Compatible with Arduino, ESP32, Raspberry Pi, and IoT systems 7Semi I2C Wire Color Code

7Semi SHT41 Temperature & Humidity Sensor Tiny Breakout with I2C Qwiic The 7Semi SHT41 Temperature & Humidity Sensor Tiny Breakout is crafted for engineers, IoT developers, and embedded system designers who need precise environmental monitoring in extremely compact spaces. Powered by the fourth-generation SHT41 sensor, it delivers exceptional accuracy with ±1.8% RH and ±0.2°C precision, making it ideal for sensitive applications like HVAC regulation, smart home devices, and industrial IoT nodes. Its stable readings and fast response time ensure reliable environmental sensing even in dynamic conditions. Designed for low-power performance, this breakout operates on a 3.3V supply and consumes less than 0.15 mA in low-power mode, making it a perfect match for wireless systems and battery-powered deployments. With built-in I2C support, multiple address options, and a compact 1.27 mm pitch connector, integration is quick and hassle-free. Whether you're building connected sensors, indoor air-quality systems, or compact IoT hardware, this module provides dependable data for real-time decision-making and energy-efficient operations. Features: Designed with the advanced SHT41 sensor, offering high-precision measurements with ±1.8% RH humidity accuracy and ±0.2°C temperature accuracy. Operates with ultra-low power consumption, drawing less than 0.15mA in low-power mode to extend battery life in portable systems. Supports I2C communication with multiple configurable addresses for flexible integration in multi-sensor setups. Compact and lightweight form factor with a 1.27 mm pitch 4-pin connector, making it suitable for tight-space and embedded applications. Built for industrial-grade reliability, ensuring consistent performance across typical indoor and light industrial environments. Simple plug-and-play workflow enables quick installation for IoT platforms, smart buildings, automation systems, and environmental monitoring.

7Semi DC Buck Converter Breakout 3.3V 2A Out (AP62301) (BO-10131) The 7Semi DC Buck Converter Breakout 3.3V 2A Out (AP62301) is a compact power module that converts higher DC voltages into a stable 3.3V output with up to 2A current. It accepts a wide range of input voltages, making it useful for powering low-voltage electronics from batteries, adapters, and other DC sources. This makes it ideal for projects that require a reliable 3.3V supply. Built using an efficient synchronous buck converter design, this board delivers dependable power with minimal energy loss and low heat output. The small form factor allows easy integration into your electronics builds, especially space-constrained and portable systems. Whether you’re working on IoT devices, embedded controllers, or sensor systems, this converter provides a simple and efficient power solution for your 3.3V needs. Features: Provides a stable 3.3V output with up to 2A continuous current Accepts a wide DC input voltage range for flexible power sources High-efficiency synchronous buck converter design Low heat generation for efficient and safe power delivery Compact breakout board for easy integration and prototyping Ideal for IoT devices, embedded systems, and battery-powered projects Suitable for powering microcontrollers, sensors, and communication modules

Cytron Maker Object – Digital IR Proximity Sensor The Cytron Maker Object is a compact digital IR proximity sensor designed for beginners, hobbyists, and robot builders who need reliable object detection or obstacle sensing in their projects. Engineered with a 38kHz modulated IR signal, the Cytron sensor remains immune to ambient light, ensuring stable readings in both indoor and outdoor environments. Its active-low NPN output, internal pull-up resistor, and easy plug-and-play interface make it ideal for robotics, automation, and DIY electronics projects where simplicity and accuracy matter. Despite its tiny form factor, the Cytron Maker Object IR sensor offers impressive sensing capability with an adjustable detection range: 15–60 cm for dark surfaces and 40–140 cm for light surfaces. The 90-degree header design allows effortless mounting on PCBs, breadboards, or compact robots such as mini sumo bots. Whether you’re building an obstacle-avoidance robot, an automatic gate safety sensor, a parking occupancy counter, or an entrance detection system, the Cytron Maker Object delivers dependable performance in a small, beginner-friendly package. Features: Cytron’s compact digital IR proximity sensor designed for easy object and obstacle detection. 38kHz modulated IR signal provides strong immunity to ambient light interference. Active-low NPN output with internal pull-up resistor for direct microcontroller compatibility. Adjustable sensing range optimized for different surface colors: 15–60cm (black), 40–140cm (white). Breadboard-friendly design with a 90-degree pin header for effortless mounting on robots or PCBs. Ideal for mini robots, sumo bots, automation setups, safety systems, and DIY electronics.

7Semi INA219 Triple-Channel DC Current Monitoring Sensor Breakout The 7Semi INA219 3-Channel DC Current Sensor Breakout is designed for makers, engineers, and system developers who need high-accuracy, real-time monitoring of voltage, current, and power across multiple DC loads. With three independent measurement channels, this board lets you track power usage holistically, ideal for multi-device systems, battery-powered projects, or performance-critical circuits. Its precise readings up to 26V and 3.2A make it a dependable choice for applications where stable power management matters. Equipped with an I2C interface, programmable addressing, and dual Qwiic I2C ports, this breakout simplifies integration into embedded systems, IoT setups, and advanced monitoring projects. Whether you’re optimizing battery health, managing motor loads, or evaluating system efficiency, this sensor board ensures reliable performance and accurate insights with embedded power-monitoring intelligence and flexible configuration options. Features: Provides three independent DC current-measurement channels, allowing simultaneous monitoring of multiple loads for comprehensive system analysis. Measures up to 3.2A current and 0–26V DC voltage with high accuracy, enabling precise power diagnostics in embedded systems. Uses a reliable I2C communication interface with 16 programmable addresses, supporting multi-sensor setups without conflicts. Offers dual Qwiic I2C ports for quick, solder-free connections and easy integration into existing development environments. Supports detailed monitoring of voltage, current, and calculated power, giving users full visibility into energy usage. Designed for battery management, motor control, IoT devices, and power-supply diagnostics requiring accurate real-time data.

SmartElex MPL3115A2 Altitude Pressure Sensor Breakout Board The SmartElex MPL3115A2 Altitude Pressure Sensor Breakout Board is a compact and reliable altitude sensor module designed for precise environmental measurements. Based on the MPL3115A2 MEMS sensor, it delivers altitude data with accuracy up to 30 cm and pressure readings in fractions of a Pascal using a high-resolution 24-bit ADC. The sensor communicates via I2C, making it simple to interface with popular microcontrollers and development boards. This Breakout Board includes all required passive components and exposes the pins on a 0.1″ header, allowing quick prototyping without extra circuitry. With added 12-bit temperature sensing, this Altitude Pressure Sensor is well-suited for drones, weather monitoring, navigation systems, and embedded IoT applications. Features: Supply voltage ranges from 1.95V to 3.6V and is internally regulated by the LDO. Digital interface supply voltage ranges from 1.6 to 3.6 V. Internally, fully compensated. Direct reading, compensated. Pressure: 20-bit measurement (in Pascals) Altitude: 20-bit measurement (metres) Temperature: 12-bit measurement (in degrees Celsius) Programmable events. Autonomous Data Acquisition Resolution down to 1 ft. (30 cm) 32 Sample FIFO Ability to log data for up to 12 days using the FIFO method Data acquisition rates range from one second to nine hours. I2C digital output interface operates at up to 400 kHz.