Raspberry Pi Clear Transparent Case for Raspberry Pi 2 and Raspberry Pi 3 This protective case was designed specifically for the Raspberry Pi Model B+, but it is also compatible with newer Pi 2 Model B and Pi 3 Model B. It consists of two pieces, a base and cover, that snap together to securely enclose the board while still allowing access to all of the Raspberry Pi’s ports and header pins. The case has vents in both the cover and base for airflow and a tunnel recess to allow viewing of the operation LEDs. All of the status LEDs on the Pi are visible through the case thanks to tunnel recesses embedded in the design and the two piece case can be taken apart without unplugging any cables. This case can be mounted on to any surface using the two screw slots on the under side, the case is also vented underneath to prevent over heating. This case supports the Raspberry Pi camera by mounting inside the top with two screws and cut out for pin hole camera. The top of the case features three cutouts for feeding ribbon cables out of the case for the Raspberry Pi camera and touch screen display . This Clear enclosure for Raspberry Pi can fit: Raspberry Pi B+ Raspberry Pi 2 model B Raspberry Pi 3 model B Note: This product does not include a Raspberry Pi. check out : Raspberry Pi ABS case with Fan(Back)

3 in 1 Black Aluminum Heat Sink for Raspberry Pi 4B The Aluminium Heat sink for Raspberry Pi 4 is an aluminum heat sink kit that is used for cooling the chip microprocessor. The heat sink is attached with thermally conductive adhesive tape that helps in efficiently cooling the Raspberry Pi . This Raspberry Pi heat sink kit's design aims to enhance the surface area that comes into contact with the air or other cooling medium. A heat sink is used to transmit thermal energy from a high-temperature device to a low-temperature fluid medium. The fluid medium is frequently air, but can also be water, refrigerants, or oil. If the fluid medium is water, the heat sink is frequently called a cold plate. When the airflow through the heat sink decreases, this results in an increase in the average air temperature. This in turn increases the heat sink base temperature. Additionally, the thermal resistance of the heat sink will also increase. The net result is a higher heat sink base temperature. Installation Method All you need to do is remove the heatsink protection and stick and place it on the raspberry pi. The heat sink has an adhesive film on the back that is easy to mount on the BGA chip by pressing it gently. The heatsink will stick to the BGA chip and cool it. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi Heatsinks online from Iotcart at the comfort of your homes. Features: Material: High-quality aluminum Design: Includes three heat sinks of different sizes Coverage: Designed to cover the CPU, RAM, and USB controller Color: Anodized black finish Thermal Adhesive: Comes with thermal adhesive backing for easy installation Heat Dissipation: Effectively dissipates heat to prevent overheating Compatibility: Fits within standard Raspberry Pi cases due to its short profile Ease of Use: Simple to apply with self-adhesive backing Applications: Overclocking: Helps maintain stable temperatures when the Raspberry Pi is overclocked for better performance. Processor-Intensive Tasks: Useful for projects involving heavy computational tasks, such as data analysis, machine learning, or video processing. Gaming: Enhances performance and prevents overheating during gaming sessions on emulators or other gaming platforms. Media Centers: Keeps the Raspberry Pi cool when used as a media center running software like Kodi or Plex. Server Applications: Ideal for running web servers, file servers, or other network services that require continuous operation. IoT Projects: Beneficial for Internet of Things (IoT) applications where the Raspberry Pi is used in environments with limited airflow. Enclosed Cases: Helps in maintaining optimal temperatures when the Raspberry Pi is housed in a case that restricts airflow

5V 0.2A 3010 Raspberry Pi Cooling Fan The 5V cooling fan can be connected to the Raspberry Pi setup to cool it when there is heat generated after usage for long hours. There are screws that are present with the fan that are useful in assembling the dc fan with the Raspberry Pi setup. The cooling fan finds its use as an exhaust fan on the Raspberry pi case as well as 3D printers . It maintains the temperature of the extruder, which results in smooth printing. This fan is specifically designed for Raspberry Pi and can be mounted on some acrylic cases . The fan is useful for projects where heatsinks just aren't cutting it. Protect your hardware with a low power fan. The greatest feature of this fan is its low power consumption (20mA @ 5VDC). This fan attaches directly to the RPi GPIO and requires no additional power source or relay circuit. Features: Good airflow Noiseless Performance Very low Current consumption Easy to install and connect.

5V Mini Fan for Raspberry Pi (30x7 mm) This 5V mini fan is very easy to use, it just needs to be powered up with a 5V power source. It has low current consumption and finds its application in a lot of projects like cooling of peltiers and heatsinks. This Cooling Fan for 3D Printer is a small but powerful fan. The cooling fan finds its use as an exhaust fan on the Raspberry pi case as well as 3D printers. It maintains the temperature of the extruder, which results in smooth printing. You can also use it to ensure that your Raspberry Pi is kept cool and running at optimal conditions when running heavy-duty operations. It can be directly connected to the 5v & GND pins of the Raspberry Pi and it will run whenever the Pi is turned on. The cooling fan operates on 0.2A 5V DC power supply which can be easily powered from RPI board. It has a 2 pin JST connector to easily connect to the printer controller system, and provide hassle-free operation. The fan is made of plastic and is lightweight. It can also be used for other cooling applications like motor drivers that require heatsinks and rise to high temperatures which indirectly affects its overall efficiency. Applications: Cooling Raspberry Pi Cooling of peltiers Cooling 3D printers Also check the Raspberry Pi 4 Official Case Fan , and the fan case is designed for Raspberry Pi 4 microcontrollers. The fan is temperature-controlled, delivering up to 1.4 CFM of airflow. The case includes a heatsink for improved heat transfer from the processor.

Raspberry Pi 3 ABS Black Case This is a high-Quality ABS Plastic Case for the Raspberry Pi. It is compatible with the Raspberry Pi 3 B, Raspberry Pi 3 B+, Raspberry Pi 2B. It fully encloses the Raspberry Pi Board with openings for all I/O ports - GPIO pins, Camera/PCI Connector, HDMI, Memory Card, USB, and Ethernet Connector. It also has openings for air circulation. check out : Raspberry Pi 2-3 Case

Raspberry Pi 4 Case With FAN - Model H4 The Raspberry Pi 4 Case with Fan - Model H4 is the all-purpose solution for every Raspberry Pi 4 user. Designed in India, this case ensures the highest quality and durability. Its innovative features, including efficient cooling with a Pre-Fitted FAN, provision for the Raspberry Pi Camera, and user-friendly design, make it a favorite among makers and commercial users alike. The durable construction and enhanced security features make it suitable for diverse conditions and activities. With a focus on user applications, this case is perfect for various age ranges and skill levels. Make your Raspberry Pi experience exceptional with this feature-rich, user-friendly case. Features: Top & Bottom of the enclosure can be fixed with screws Wall mount / Table mount can be done with just two screws CCTV Camera mount provision (1/4" knurl thread insert used which is common for camera tripod use) helps to install the Raspberry Pi on wall or ceiling.

Raspberry Pi Aluminium Case with Double Fans This gold aluminium case is a perfect fit for Raspberry Pi 4B Model. The aluminium casing is made with the help of CNC machining technology that provides a protective shell to the product. The dual fan of the casing is designed for low energy consumption that provides a dual cooling experience and no overheating problems. The casing keeps the Pi safe from radiation and rusting. The open design of the casing helps in maintaining a strong Wi-Fi Signal. Explore wide range of Raspberry Pi Case with Best Prices. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi aluminium case online from Iotcart from the comfort of your homes. Features The stripe design and the dual fan allows for an efficient heat dissipation. It works silently and provides a great cooling performance. All ports and slots of the case match with raspberry Pi Model 4B making it a perfect fit.

Raspberry Pi Transparent Case + Heat Sink (3pcs) This is a high-Quality Acrylic Case for the Raspberry Pi. It is compatible with the Raspberry Pi 3 B, Raspberry Pi 3 B+, Raspberry Pi 2B. It fully encloses the Raspberry Pi Board with openings for all I/O ports – GPIO pins, Camera/PCI Connector, HDMI, Memory Card, USB, and Ethernet Connector. It also has a Cooling Fan Slot to cool down the board from the front side as well as many ventilation ports From backside for good heat dispersion. A transparent case that is best suited for the Raspberry Pi 3 Model B. It also comes with a heat sink that can be used to cool down the heat generated during processing by the Motherboard. (The package contains only the case and 3 pcs heat sink. The motherboard has to be bought separately). Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi transparent case online from Iotcart.

Raspberry Pi Model 4B Heat Sink The Aluminium Heat sink for Raspberry Pi is an aluminium heat sink kit that is used for cooling the chips microprocessor. The heat sink is attached with thermally conductive adhesive tape that helps in efficiently cooling the Pi. Why is it necessary? A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher temperature device to a lower temperature fluid medium. The fluid medium is frequently air, but can also be water, refrigerants or oil. If the fluid medium is water, the heat sink is frequently called a cold plate. When the air flow through the heat sink decreases, this results in an increase in the average air temperature. This in turn increases the heat sink base temperature. And additionally, the thermal resistance of the heat sink will also increase. The net result is a higher heat sink base temperature. Installation Method All you need to do is remove the heatsink protection and stick ot on the raspberry pi. The heat sink has an adhesive film on the back that is easy to mount on the BGA chip by pressing it gently. The heatsink will stick to the BGA chip and cool it. Note: Iotcart is the authorized seller of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi Heatsinks online from Iotcart at the comfort of your home. Features: Material: Lightweight aluminum Design: Three heat sinks of different sizes Coverage: Designed to cover the CPU, RAM, and USB controller Thermal Adhesive: Comes with thermal adhesive backing for easy installation Heat Dissipation: Helps in effective heat transfer and cooling Performance: Prevents overheating and maintains optimal performance Applications: Overclocking: Helps maintain stable temperatures when the Raspberry Pi is overclocked for better performance. Processor-Intensive Tasks: Useful for projects involving heavy computational tasks, such as data analysis, machine learning, or video processing. Gaming: Enhances performance and prevents overheating during gaming sessions on emulators or other gaming platforms. Media Centers: Keeps the Raspberry Pi cool when used as a media center running software like Kodi or Plex. Server Applications: Ideal for running web servers, file servers, or other network services that require continuous operation. IoT Projects: Beneficial for Internet of Things (IoT) applications where the Raspberry Pi is used in environments with limited airflow. Enclosed Cases: Helps in maintaining optimal temperatures when the Raspberry Pi is housed in a case that restricts airflow.

Raspberry Pi 3A+ Official Case The Raspberry Pi 3A+ Case has been designed to fit both the Pi 3 Model A+ and the Pi 1 Model A+. The high-quality ABS construction consists of two parts. The base features cut-outs to allow access to the micro SD Card and the HDMI, audio/video and USB ports, as well as the power connector. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi 3A+ case online from Iotcart at the comfort of your homes.