EMAX D-SHOT Bullet 6A ESC for Onshot42 2S FPV Racing Drone The EMAX D-SHOT Bullet 6A ESC is a high-performance drone speed controller engineered for Onshot42 2S FPV racing drones. Designed with precision, this compact ESC controller delivers reliable performance with a 6A continuous current capacity and advanced DShot protocol support for ultra-smooth throttle control. Featuring BLHeli-S firmware, it includes active braking, damped light output, and programmable motor timing—ensuring fast response, enhanced flight stability, and improved efficiency. Perfect for drone enthusiasts seeking a lightweight yet powerful electronic speed controller for drone builds. Features: The market's lightest and smallest ESC, built particularly for high-level FPV racing. Using the most recent BLHeli-S firmware (16.5), hardware PWM provides a signal that improves smooth throttle response and reduces noise. Supports the new digital signal DSHOT as well as the analog signals MULTISHOT, ONESHOT42, and ONESHOT125. High-quality MOSFET and ceramic capacitors. The 3oz high TG PCB board dramatically improves heat dissipation and system efficiency. The new aluminum heat sink provides protection from propeller impact damage.

EMAX Nano Series 20A BLHeli Oneshot125 3-4S Electronic Speed Controller The EMAX Nano Series 20A BLHeli Oneshot125 Electronic Speed Controller is a high-performance ESC controller built specifically for racing drones and multi-copters. Featuring BLHeli firmware and OneShot125 compatibility, this 20A ESC ensures ultra-fast throttle response and smooth flight performance. With a peak current of up to 40A, it delivers reliable power for demanding drone setups. Its opto design and twisted pair wire provide excellent noise resistance, while compatibility with popular flight controllers like Skyline32, Naze32, Pixhawk, and CC3D makes integration effortless. Crafted using premium electronic components, this electronic speed controller for drone offers outstanding durability, efficient current handling, and stable operation — making it the perfect choice for drone enthusiasts and FPV racers. Features: Use genuine electronic components to ensure good quality and extend the ESC's present durability capability. It is built on BLHeli firmware and is optimized for great performance, including outstanding linearity and a much faster throttle response. Multi-rotors are specifically intended to be compatible with fixed-wing aircraft and helicopters. Multiple protective measures are available, including low-voltage cut-off, overheat prevention, and throttle signal loss protection. The throttle range may be adjusted and is entirely compatible with all receivers, resulting in smooth, linear, and precise throttle responses. All parameters, including default settings, can be programmed with a program card or a transmitter.

EMAX Nano Series 3S-4S V2 Active Braking 12A ESC for Multicopters The EMAX Nano Series 3S-4S V2 Active Braking 12A ESC is a high-quality electronic speed controller for drones, engineered specifically for racing multicopters. Built on BLHeli firmware and supporting OneShot125, it delivers precise throttle control and exceptional responsiveness. Its active braking (damped light) feature ensures smooth deceleration and stable flight performance. This compact and lightweight drone speed controller is compatible with popular flight controllers like Skyline32, Naze32, Pixhawk, and CC3D. With an opto design and twisted pair throttle signal wire, it offers excellent anti-jamming capability and reliability during high-speed operations. Supporting both SimonK and BLHeli firmware, this ESC controller is ideal for drone enthusiasts seeking efficiency, performance, and durability. Features: Use genuine electronic components to ensure good quality and extend the ESC's present durability capability. Based on BLHeli firmware, tuned for high performance, excellent linearity, and substantially faster throttle response. Designed specifically for multirotors and compatible with fixed-wing aircraft and helicopters. Multiple protective measures are available, including low-voltage cut-off, overheat prevention, and throttle signal loss protection. Throttle range may be adjusted and is entirely compatible with all receivers, resulting in smooth, linear, and precise throttle responses. All parameters, including the default settings, can be programmed using a program card or a transmitter.

EMAX Simon Series 20A 2-4S LiPo Brushless Electronic Speed Controller for Drones and RC Aircraft The EMAX Simon Series 20A Brushless Electronic Speed Controller is a high-quality ESC for drones and RC aircraft, designed to deliver smooth, responsive, and reliable performance. Powered by advanced SimonK firmware, this drone speed controller ensures superior throttle precision and flight stability. Compatible with 2–4S LiPo batteries, it supports a wide range of brushless motor configurations, making it ideal for FPV racing and aerial applications. With its compact, lightweight build and efficient power delivery, the EMAX Simon 20A electronic speed controller stands out as a dependable choice for hobbyists seeking performance and durability in every flight. Features: High quality components American-made (IR) MOSFETs provide consistent current and long-term durability. PCB is durable. To extend the life of the ESC, it is constructed with thick 5-oz. high-grade copper. Advanced Firmware. SimonK firmware improves throttle response and stability. Battery compatibility Supports 2-4S LiPo batteries for flexible power sources. Lightweight Design Compact and lightweight, excellent for drone enthusiasts looking for efficient and rapid motor control.

Hobbywing Xrotor 40A Brushless ESC for DIY Multicopter Drone The Hobbywing Xrotor 40A Brushless ESC is made for DIY multicopter drones, giving you great performance and stability. It has a special program that ensures quick throttle response and works better than many open-source software options. The firmware is optimized for disc motors, offering excellent compatibility. The ESC has a smart design that adapts easily and is simple to use. The twisted throttle signal wire helps reduce interference for smoother flight. It supports fast refresh rates up to 621Hz and works well with most flight controllers. With its low-resistance MOSFET and strong power handling, it ensures stable and reliable performance. Key Features Optimized for Multicopters: Fast throttle response and better performance. Disc Motor Compatible: Optimized firmware for smooth operation. Stable Flight: Twisted throttle signal wire reduces interference. High Refresh Rate: Supports up to 621Hz throttle signal. Reliable Power Handling: Ultra-low resistance MOSFET for stability. Enhanced Performance: Specialized MOSFET driver for superior stability. Shop the SimonK 30a BLDC ESC !

40 AMP ESC - Yellow Brushless Motor ESC is the perfect solution for drone enthusiasts and hobbyists. It excels in providing better flight control with its advanced BLDC technology. Crafted with top-quality materials, this speed controller ensures durability and optimal performance under ideal conditions. Suitable for motors consuming up to 40A current, it works on 2S-3S LiPo batteries and includes an onboard BEC for regulated 5V power. Brushless Motor ESC is not just a speed controller; it's a key component for endless possibilities in the world of drones. Made for ease of use and maintenance, it is the ideal choice for both beginners and experienced users. Add it to your cart now and experience the difference! Features: High quality brushless BEC replacement parts Excellent output ability of continues current of 40A Premium material made, stable and reliable Durable, Speed Controller, 40A, Universal Ideal speed controller for RC/FPV/Quadcopter/RC Airplanes and others Low resistance Sixteen cells Max (with BEC disabled) User programmable brake Low voltage auto setting based on battery Throttle range self-adjusting Soft start ramp up Auto motor cutoff with reset Runs motor in forward or reverse Safe power arming program ensures motor will not run accidentally after turn on Low torque start Auto shut down when signal is lost

30A Simonk ESC Controller for Drones The Simonk 30A ESC is an Electronic Speed Controller (ESC) which is used to drive brushless DC motors and is capable of supplying current up to 30A. The 30A Simonk controller is made for quadcopters and multicopters to provide faster and better motor speed control. Suited for quads up to 2.5kg, octos up to 5kg. The ESCs do not overheat, burn or lock out - unline many other ESCs flashed with the SimonK firmware. The ESC motor leads are reduced to simple bullet connectors, this allows for quick and clean installation inside your multi rotor. Compatible with 2S to 3S battery This 30A ESC features a battery eliminator circuit (BEC) that provides 5V and 2A to the receiver or flight controller, so an extra battery to power those is not needed. These electronic speed controllers are best used with A2212 BLDC motors of 1000kv, 1400kv, and 2200kv. Warning: When we connect BLDC ESC directly to the remote control receiver; never ever switch off the remote control before switching off power to the BLDC ESC. Depending on the model of the remote control; it may result in full throttle applied to the motor and it will rotate at full speed. Connections: Power: Red - 7.4V to 14.8V Black - GND Servo: Yellow - Throttle Input Red - 5V, 2Amp Out Brown - GND BLDC Motor: 3 Blue Wires - BLDC ESC Connections SAFE POWER FUNCTION OF THE SIMONK 30A ESC MOTORS High-quality MOSFETs for BLDC motor drive. The throttle calibration function of the Simonk ESC motor helps you to adapt to different remote throttle travel differences and improve throttle response smoothly. It provides low voltage protection as well as reverse polarity protection. It provides protection on the 5v lines. High-performance heat sink for better thermal management. Features: Current Rating: 30A, suitable for driving motors that consume up to 30A of current. Voltage: Compatible with 2S-3S LiPo batteries (7.4V to 11.1V). BEC Output: Provides 5V and 2A to power the flight controller and other onboard modules. Firmware: Flashed with SimonK firmware for improved motor speed control and performance. Protection Features: Includes low-voltage protection, over-heat protection, and throttle signal loss protection. Connections: Features bullet connectors for easy and quick installation. Compatibility: Works well with A2212 brushless motors (1000kv, 1400kv, 2200kv). Applications: Ideal for use in quadcopters, multi-rotor drones, and RC planes. Application: BLDC Motors in Quadcopters. Multirotor drones. RC Planes etc.

SimonK ESC 12A This is the Simonk 12A is a great ESC product DIY Drone enthusiasts and quadcopters. This 12A Brushless ESC motor supports 1-3S Small Axis. This Simonk ESC 12A ESC motor is optimized to achieve the perfect driving effect With low voltage protection, and over-temperature protection. This Simonk ESC has high performance and powerful functions. Users can set functions according to their needs to fully reflect their intelligent characteristics. Unique circuit design, and strong anti-interference ability. The water-cooled ESC has a limited range of programming functions and is designed to be plug-and-play. The throttle response is fast and has a very smooth speed control linearity. Compatible with scale boats and racing boats. The water-cooling system is composed of high-quality PBC components and has a strong current capacity. It can dissipate heat for the model and reduce noise. The brushless ESC water-cooled electric governor adopts a waterproof design to ensure the safety of the components and prolong their service life. Browse the exclusive collection of ESC for Drones . Applications: RC Plane RC Quadcopters RC Boat

SimonK Red 30A BLDC ESC Electronic Speed Controller with Connectors The Simonk 30A BLDC ESC for drones is an Electronic Speed Controller (ESC) that is used to drive brushless DC drone motors and is capable of supplying current up to 30A. The Simonk 30A  ESC controller is made for quadcopters and multicopters to provide faster and better motor speed control. This High-speed 30A brushless ESC for racing drones features a battery eliminator circuit (BEC) that provides 5V and 2A to the receiver or flight controller, so an extra battery is not needed to power them. These electronic speed controllers with fast throttle response are best used with A2212 BLDC motors of 1000kv, 1400kv, and 2200kv. CONNECTIONS: Power: Red - 7.4V to 14.8V Black - GND Servo: Yellow - Throttle Input Red - 5V, 2Amp Out Brown - GND BLDC Motor: 3 Blue Wires - BLDC ESC Connections Safe Power Function of the Simonk 30A ESC Motors High-quality MOSFETs for BLDC motor drive. The throttle calibration function of the Simonk ESC motor helps you to adapt to different remote throttle travel differences and improve your throttle response smoothly. It provides low voltage protection as well as reverse polarity protection. This brushless motor speed controller provides protection on the 5v lines. High-performance heat sink for better thermal management. Features: Simonk 30A Electronic Speed Controller (ESC) with connectors. Capable of supplying constant current up to 30A and peak current of 40A for less than 10 seconds. Features a battery eliminator circuit (BEC) providing 5V and 2A to the receiver or flight controller. Designed for use with A2212 BLDC motors of 1000kv, 1400kv, and 2200kv. Connections: Power (Red for 7.4V to 14.8V, Black for GND), Servo (Yellow for throttle input, Red for 5V/2A output, Brown for GND), BLDC Motor (3 Blue wires). Throttle calibration function for adapting to different remote throttle travel differences and improving throttle response. Provides low voltage protection, reverse polarity protection, and protection on the 5V lines. Equipped with high-quality MOSFETs for BLDC motor drive. Features a high-performance heat sink for better thermal management. Application: BLDC Motors in Quadcopters. Multirotor drones. RC Planes etc.

Simonk Red ESC 30A without Connector for Quadcopter The Simonk 30A ESC is an Electronic Speed Controller (ESC) that is used to drive brushless DC motors and is capable of supplying current up to 30A. The 30A Simonk controller is made for quadcopters and multicopters to provide faster and better motor speed control. This 30A ESC features a battery eliminator circuit (BEC) that provides 5V and 2A to the receiver or flight controller, so an extra battery to power those are not needed. These electronic speed controllers are best used with A2212 BLDC motors of 1000kv , 1400kv , and 2200kv . Warning: When we connect the BLDC ESC directly to the remote control receiver; never ever switch off the remote control before switching off power to the BLDC ESC. Depending on the model of the remote control; it may result in full throttle applied to the motor and it will rotate at full speed. Explore our complete range of Drone Parts ! Also Check out the best collection of ESC for Drones . Connections: Power: Red - 7.4V to 14.8V Black - GND Servo: Yellow - Throttle Input Red - 5V, 2Amp Out Brown - GND BLDC Motor: 3 Blue Wires - BLDC ESC Connections SAFE POWER FUNCTION OF THE SIMONK 30A ESC MOTORS High-quality MOSFETs for BLDC motor drive. The throttle calibration function of the Simonk ESC motor helps you to adapt to different remote throttle travel differences and improve your throttle response smoothly. It provides low voltage protection as well as reverse polarity protection. It provides protection on the 5v lines. High-performance heat sink for better thermal management. Application: Quadcopters. Multirotor drones. RC Planes.