Green R13-507 16mm Round Cap Momentary Push Button Switch – 2 Pin

7Semi 5A Analog INA169 DC Current Sensor Breakout The 7Semi 5A Analog INA169 DC Current Sensor Breakout is a precision Analog DC current sensor designed for accurate current monitoring in electronic circuits. Powered by the trusted INA169 chip, it delivers consistent current readings up to 5A across a wide input range of 2.7V to 60V. Its low offset voltage and minimal quiescent current ensure reliable measurements, while adjustable gain and overcurrent protection add versatility for various applications. Compact and easy to integrate with microcontroller-based systems, this INA169 current sensor is perfect for IoT projects, battery management, power monitoring, and smart energy solutions, providing dependable performance for both hobbyists and professional engineers. Features: Wide Voltage Range Compatibility: Operates efficiently between 2.7V and 60V, making it suitable for both low and high-voltage applications. High-Side Current measuring: Enables unipolar high-side current measuring for safer and more accurate readings. Customizable Gain Control: Easily alter output sensitivity with a single resistor to meet your individual application requirements. Built-in Signal Amplifier: Provides clean and amplified output signals for accurate ADC conversion. Overcurrent detection protects connected components by detecting and responding to excessive current. Low Quiescent Current: Consumes only 60 µA, making it ideal for energy-sensitive projects. Microcontroller-Friendly: Fully compatible with Arduino, ESP32, STM32, Raspberry Pi, and other development boards. Compact Design: Small form factor excellent for embedded system integration and space constraints. Connection Diagram with Arduino:

7Semi SHT41 Temperature & Humidity Sensor Tiny Breakout with I2C Qwiic The 7Semi SHT41 Temperature & Humidity Sensor Tiny Breakout is crafted for engineers, IoT developers, and embedded system designers who need precise environmental monitoring in extremely compact spaces. Powered by the fourth-generation SHT41 sensor, it delivers exceptional accuracy with ±1.8% RH and ±0.2°C precision, making it ideal for sensitive applications like HVAC regulation, smart home devices, and industrial IoT nodes. Its stable readings and fast response time ensure reliable environmental sensing even in dynamic conditions. Designed for low-power performance, this breakout operates on a 3.3V supply and consumes less than 0.15 mA in low-power mode, making it a perfect match for wireless systems and battery-powered deployments. With built-in I2C support, multiple address options, and a compact 1.27 mm pitch connector, integration is quick and hassle-free. Whether you're building connected sensors, indoor air-quality systems, or compact IoT hardware, this module provides dependable data for real-time decision-making and energy-efficient operations. Features: Designed with the advanced SHT41 sensor, offering high-precision measurements with ±1.8% RH humidity accuracy and ±0.2°C temperature accuracy. Operates with ultra-low power consumption, drawing less than 0.15mA in low-power mode to extend battery life in portable systems. Supports I2C communication with multiple configurable addresses for flexible integration in multi-sensor setups. Compact and lightweight form factor with a 1.27 mm pitch 4-pin connector, making it suitable for tight-space and embedded applications. Built for industrial-grade reliability, ensuring consistent performance across typical indoor and light industrial environments. Simple plug-and-play workflow enables quick installation for IoT platforms, smart buildings, automation systems, and environmental monitoring.

SmartElex FT232RL USB to TTL Converter – High-Speed USB to UART Module The SmartElex FT232RL Industrial USB to TTL Converter is a durable and high-performance communication module designed to bridge USB and TTL interfaces seamlessly. Powered by the reliable FTDI FT232RL chipset, it ensures stable and efficient data transmission, making it perfect for industrial use, embedded systems, and automation setups. Its robust design, built-in ESD protection, and resettable fuse make it a trusted tool for long-term and demanding environments. This USB to UART converter supports both 3.3V and 5V logic levels, giving you flexibility for various applications such as microcontroller programming, data logging, and debugging. With plug-and-play support across Windows, macOS, Linux, and Android, it’s user-friendly and versatile. The onboard LEDs for TXD, RXD, and power make monitoring communication easy, while the fool-proof 8-pin header ensures secure and reliable connections every time. Applications: Programming and debugging microcontrollers Serial communication with embedded systems USB to TTL conversion for various devices Data logging and monitoring Integration with industrial automation systems. Cautions: Ensure correct voltage selection using the onboard jumper to prevent damage. This module is designed for TTL level signals; do not connect directly to RS232 interfaces. Avoid exposure to moisture and static discharge. Features: Built with the original FTDI FT232RL chipset for reliable USB to UART communication. Supports 3.3V and 5V logic levels, selectable via jumper. Wide baud rate range from 300 bps to 3 Mbps. Features TXD, RXD, and Power LEDs for clear status indication. Equipped with ESD protection diodes and a resettable fuse for safety. Compatible with Windows, macOS, Linux, and Android systems. Compact and lightweight design, ideal for embedded and industrial setups.

DFRobot Gravity CAN to TTL Communication Module with SLCAN Protocol The Gravity: CAN to TTL Communication Module is a powerful solution that bridges the gap between CAN bus and UART/USB interfaces. Supporting the CAN 2.0 protocol and incorporating SLCAN commands, this module simplifies complex CAN communications into easy-to-use AT commands. You don't need to worry about the technical details of the CAN protocol - just send simple commands to transmit data and configure the module. With compatibility for both 3.3V and 5V systems, this versatile module fits seamlessly into various project requirements without additional level shifters. This CAN bus converter features both UART and integrated USB 1.0 interfaces, eliminating the hassle of USB-to-UART conversions during debugging. Simply connect it to your computer via USB for convenient data testing through a serial assistant. The module offers configurable CAN baud rates from 25K to 1Mbps and can handle up to 500 data packets per second without loss, ensuring reliable communication for your projects. With helpful features like data communication indicators and a 120? resistor jumper, this SLCAN protocol module streamlines development and troubleshooting for students, hobbyists, and professional engineers working with CAN bus systems. Features Supports CAN 2.0 protocol for wide compatibility Dual interface with both UART and USB 1.0 connections Compatible with 3.3V and 5V voltage levels Configurable CAN baud rates from 25Kbps to 1Mbps Default UART baud rate of 115200Bps Maximum transmission rate of 2ms per packet Handles 500 data packets per second without loss Includes data communication indicator for easy monitoring Features 120? resistor jumper for proper CAN bus termination Configuration parameters saved even when power is disconnected Connection Diagram of Gravity: CAN to TTL Communication Module and ESP32-E

reComputer J3010 Edge AI Computer with NVIDIA Jetson Orin Nano 4GB Brains of a genius, size of a sandwich - The reComputer J3010 Edge AI Computer by Seeed Studio is a high-performance and compact solution designed for AI applications at the edge. Powered by the NVIDIA Jetson Orin Nano 4GB SoM, it delivers robust processing capabilities optimized for machine learning and AI workloads. The device comes pre-installed with Jetpack 5.1.1 (Super Mode JP6.2), enabling advanced AI features and superior performance. It includes a 128GB SSD for ample storage, along with versatile connectivity options such as 4x USB 3.2 ports, HDMI output, and Gigabit Ethernet. The carrier board expands flexibility with M.2 Key E for WiFi, M.2 Key M for additional SSD storage, RTC, CAN interface, and a 40-pin GPIO header. As a dedicated Edge AI computer, the reComputer J3010 is ideal for industrial automation, robotics, smart vision, and other AI-driven applications where compactness and performance are critical. (Power adapter not included). Related Searches - Orin Nano Accesories Features: Capable of Bringing Generic AI to the Edge You can now create AI agents capable of analyzing enormous amounts of live or archived videos and images using Vision-Language Models (VLM) such as LLaVA. These new AI agents assist practically every industry in summarizing, searching, and extracting actionable insights from video using natural language. Create Multi-stream AI Video Analytics Jetson Orin Nano uses the NVIDIA Multi-Standard Video Decoder into its video analytics architecture. This video decoder speeds up video decoding by supporting low-resolution mobile material, Standard Definition (SD), High Definition (HD), and UltraHD (8K, 4K, etc). reComputer J3010 supports 11x1080p30 streaming. See our tested YOLOv8 performance utilizing NVIDIA Deepstream for single and multi-model multi-stream scenarios. Fastest Way to Deploy Generative AI and Computer Vision Models We have prepared a Jetson example for you! It provides one-line deployment of edge AI apps such as Ollama and Llama3, as well as computer vision tools such as YOLOv8. We have configured the entire environment for you to allow a single command deployment of projects. Hardware Overview: reComputer J401 Carrier Board, Included in the Full System - reComputer J3010 Desktop, Wall Mount, Expandable, or Fit in Anywhere User Projects Made With the J3010 Smart Security Camera that detects people and tracks movement using simple CV models. Line-Following or Obstacle-Avoiding Robot for classrooms, workshops, and hobby builds. AI Face Recognition System for attendance, home automation triggers, or DIY access control. Which Jetson Is Right for You? Jetson Module AI Performance (TOPS) CUDA Cores Best For Ideal User Jetson Nano ~0.5 TOPS 128 Basic AI tasks, simple robotics, learning projects Students, hobbyists, first-time AI builders Jetson Orin Nano (4GB) Up to 20 TOPS 512 Entry-level edge AI, vision projects, DIY automation Makers and beginners upgrading from Nano Jetson Orin Nano (8GB) Up to 40 TOPS 1024 Real-time vision, robotics, AI robotics kits, compact automation Developers building smarter robots and edge AI systems Jetson Orin NX Up to 100 TOPS 1024 Heavy AI workloads, multi-model pipelines, advanced robotics Professionals needing workstation-level edge performance Jetson Orin Nano – J3010 Variant Up to 20 TOPS 1024 Efficient edge AI computing, robotics, smart cameras Users who want high performance in a small, power-efficient system Applications: AI Video Analytics Machine Vision Autonomous Mobile Robot (AMR) Generative AI

reComputer J401 – Carrier Board for Jetson Orin Nano & Orin NX The reComputer J401 is an advanced NVIDIA Jetson Orin NX carrier board, purpose-built to support both Jetson Orin Nano and Orin NX modules. Designed as an open-source extension board, it breaks out a comprehensive range of I/O interfaces from the SoM, offering seamless high-speed and low-speed connectivity to meet diverse development needs. With its compact form factor, reliable performance, and developer-friendly architecture, the J401 simplifies the process of building, testing, and scaling embedded systems. Ideal for prototyping, edge deployments, and long-term product updates, it accelerates time-to-market while providing the flexibility required for robotics, computer vision, and AI-powered edge applications. Features: NVIDIA Elite Partner certified – ensuring reliable quality and compatibility. 260-pin Jetson module connector – supports both Jetson Orin NX and Orin Nano modules. Open-source hardware – flexible and developer-friendly for customization. Compact form factor – measures just 100mm x 80mm for space-saving integration. Wide operating temperature range – works reliably from -10°C to 60°C. Wireless connectivity – M.2 Key E slot for WiFi and Bluetooth expansion. Storage expansion – M.2 Key M slot supports SSD integration. High-speed networking – RJ-45 GbE port with 10/100/1000M support. Camera and display support – includes 2x CSI camera interfaces and 1x HDMI 2.1. Versatile USB options – 1x USB 2.0 Type-C (device mode) + 4x USB 3.2 Type-A (10Gbps). Stable power input – DC Jack 12V/5A for dependable operation. Optimized for edge applications – ideal for robotics, computer vision, and generative AI projects. Applications: AI Video Analytics Machine Vision Autonomous Mobile Robot (AMR) Generative AI Hardware Overview: Applications Gallery – Sample Edge AI Setups AI Video Analytics Rig : Orin NX + J401 + CSI camera + NVMe SSD for real-time video inference and storage. Autonomous Mobile Robot (AMR) : Combine wheel motors (via MCU or controller board), sensors, camera feed, and edge-AI inference on Orin for navigation, obstacle detection, and decision-making. Industrial Automation & Monitoring : Use Gigabit Ethernet, CAN port, multiple sensors, and AI inference to monitor machines, detect anomalies or control actuators. Generative AI / Edge ML Server : Use Orin NX with SSD and cooling via J401 to run heavy ML workloads locally ideal for edge-AI deployments without cloud dependency. Computer Vision + Robotics Laboratory Setup : Multiple cameras via dual CSI, USB 3.2 devices, external sensors build a flexible AI-powered research or prototyping station.

7Semi BME280 Temperature, Humidity & Pressure Sensor Nano Breakout The 7Semi BME280 Nano Breakout is a compact and highly reliable environmental sensing module designed for projects that require accurate temperature, humidity, and barometric pressure readings. Powered by Bosch’s trusted BME280 sensor, it delivers precise data with ±1.0°C temperature accuracy, ±3% humidity accuracy, and ±1 hPa pressure accuracy. With its 2.54mm pitch header and I2C interface, this breakout integrates effortlessly into Arduino, Raspberry Pi, and other embedded systems, making it perfect for weather stations, smart home setups, and environmental monitoring projects. Its small footprint and robust construction make it suitable for space-constrained applications without compromising performance. Whether you're building a DIY weather dashboard, automating a greenhouse, or working on an IoT environmental sensor node, the BME280 ensures fast, stable, and reliable readings. This sensor is also capable of altitude measurement, bringing added versatility to drones, outdoor devices, and scientific experiments. Features: Provides highly accurate temperature, humidity, and barometric pressure measurements using the Bosch BME280 sensor. Supports I2C communication and operates at 3.3V, ensuring simple wiring and compatibility with common microcontrollers. Compact nano breakout design with a 2.54mm pitch header, making it ideal for breadboard and prototype-friendly builds. Offers dependable performance with ±1.0°C temperature accuracy, ±3% humidity accuracy, and ±1 hPa pressure accuracy. Functions as an altimeter with ±1 meter accuracy, adding enhanced functionality for robotics and outdoor applications. Built with a durable and reliable layout, ensuring long-term stability in environmental and scientific projects. Suitable for weather monitoring, smart home automation, agriculture, greenhouse tracking, and IoT systems.

7Semi DS18B20 2M Cable Waterproof Digital Temperature Probe The 7Semi DS18B20 2M Cable Waterproof Digital Temperature Probe is built for anyone who needs precise and stable temperature monitoring in challenging environments. With its stainless-steel sealed casing and durable 2-meter cable, this sensor delivers highly accurate readings, even when fully submerged or installed in remote locations. Whether you're monitoring aquaponics systems, greenhouse conditions, or industrial temperature processes, this digital probe ensures you get consistent and reliable data every single time. Designed with a simple 1-Wire digital interface, the DS18B20 works seamlessly with Arduino, Raspberry Pi, ESP boards, and other microcontrollers, making it ideal for hobbyists, engineers, and automation enthusiasts. Its long cable, waterproof build, and wide temperature range make it a versatile choice for environmental monitoring and precision-driven applications where stability and robustness matter the most. Features: Measures temperatures from –55°C to +125°C, making it suitable for industrial, environmental, and underwater applications. Provides ±0.5°C accuracy, ensuring stable and trustworthy readings. Fully waterproof stainless-steel enclosure protects against moisture, corrosion, and rugged terrain. Comes with a 2-meter high-strength cable to support remote, underwater, or difficult-to-access installations. Supports 9–12 bit resolution and easily integrates using its 3-wire connection and 1-Wire digital protocol.

7SEMI PT100 RTD Temperature Sensor Probe 2-wire 1m -70~300C The 7SEMI PT100 RTD Temperature Sensor Probe 2-wire 1 m (-70 ~ 300°C) (ES-13519) is a reliable temperature sensor designed to deliver accurate and stable readings across a wide temperature range. It uses a platinum PT100 RTD element, which is well known for precision and long-term consistency, making it suitable for both learning and professional applications. The sensor comes with a 1-meter cable and a sturdy stainless-steel probe that can handle demanding environments. Its simple 2-wire design makes it easy to connect with temperature controllers, data loggers, and microcontroller-based systems. Whether you’re working on industrial monitoring, laboratory experiments, or electronics projects, this PT100 probe offers a good balance of accuracy, durability, and ease of use. Features: Uses a PT100 platinum RTD element for accurate and stable temperature measurement Wide operating temperature range from -70°C to 300°C 2-wire configuration for simple and reliable connectivity Stainless steel probe for durability and long service life Comes with a 1-meter insulated cable for flexible installation Suitable for industrial, laboratory, and electronics projects Provides consistent readings over time with minimal drift

7Semi SHT40 Temperature & Humidity Sensor Breakout I2C Qwiic SHT40 Breakout (ES-13514) The 7Semi SHT40 Temperature & Humidity Sensor Breakout (I2C Qwiic) is a compact and reliable sensor module designed to measure both temperature and humidity with high accuracy. It is based on the Sensirion SHT40 sensor, making it suitable for modern electronics projects that need precise environmental data. This breakout board supports I2C communication and comes with a Qwiic connector, allowing quick and solder-free connections with microcontrollers like Arduino, ESP32, and Raspberry Pi. Its small size and low power consumption make it ideal for IoT devices, weather monitoring, indoor air quality projects, and learning applications where simplicity and accuracy matter. Features: High-accuracy temperature and humidity sensing using the SHT40 sensor Supports I²C communication for easy integration with microcontrollers Qwiic connector enables quick, solder-free plug-and-play connections Wide measurement range of 0–100% RH and –40°C to +125°C temperature Low-power and compact design, ideal for IoT and battery-powered projects Compatible with Arduino, Raspberry Pi, ESP32, and other development boards SHT40 Board Dimensions

SmartElex 2 Channel CAN HAT The SmartElex 2 Channel CAN HAT is a high-performance dual-channel CAN bus HAT for Raspberry Pi that enables reliable CAN communication with ECUs, motor controllers, sensors, and industrial devices. Built using two MCP2515 CAN controllers and TJA1050 CAN transceivers, this Raspberry Pi CAN communication interface supports data rates of up to 1 Mbps, ensuring fast and stable message exchange. The HAT features configurable 120Ω termination resistors, onboard LED indicators, extended temperature support, and built-in ESD protection for dependable operation in rugged environments. Its compact, stackable form factor makes it an ideal 2 Channel CAN HAT solution for automotive diagnostics, robotics control, and industrial automation projects. Features: Dual separate CAN channels. Built-in MCP2515 controller (SPI interface). TJA1050 CAN transceivers provide robust signal output. Compatible with all 40-pin Raspberry Pi boards. 120Ω termination resistors (user-configurable). Onboard TX/RX LEDs for status indication. Supports up to 1 Mbps signaling rate. Industrial-grade temperature and ESD protection

Maker pHAT for Raspberry Pi – Headless Setup, GPIO Debugging & Built-In I/O The Maker pHAT for Raspberry Pi is designed to make electronics, coding, and headless setup dramatically easier for beginners, educators, and STEM learners. With built-in USB-to-UART, onboard LEDs, push buttons, and an active buzzer, this Raspberry Pi HAT simplifies GPIO debugging, troubleshooting, and prototyping. It eliminates the need for extra components, messy wiring, or a monitor-keyboard setup - making it perfect for classrooms, DIY projects, and Raspberry Pi learning environments. Maker pHAT fits perfectly on Raspberry Pi Zero and works seamlessly with Raspberry Pi 3B/3B+/4B models using the included stacking header. It provides labeled GPIO pins for easy connection, LED indicators for real-time feedback, and push-button support for proper system shutdown. Whether you are exploring electronics, teaching students, or building quick prototypes, Maker pHAT delivers a smoother, faster, and frustration-free Raspberry Pi learning experience. Features: Designed in Raspberry Pi Zero size, stacking perfectly on Pi Zero / Zero W / Zero WH and fully compatible with Raspberry Pi 3B/3B+/3A+/4B series. Supports headless setup easily via onboard USB-to-UART (Rev1.10 uses FT231X), removing the need for monitor, keyboard, or mouse. Equipped with LED indicators for key GPIO pins (GPIO 17, 18, 27, 22, 25, 12, 13, 19) to simplify GPIO learning and debugging. Features 3 programmable push buttons (GPIO 21, 19, 20) for input learning and safe shutdown functionality. Includes active buzzer on GPIO 26 for audio output in projects and coding exercises. Comes with clearly labeled GPIO footprint, including SPI, UART, I2C, 5V, 3.3V & GND for easier wiring and prototyping. Powered via USB Micro-B 5V input from laptop, USB adapter, or power bank. Built using a Purple PCB, making it visually attractive for classroom and DIY setups.

Holybro Micro M9N GPS With Case The Holybro Micro M9N GPS With Case is a compact, high-performance M9N GPS with case module designed to deliver precise positioning and reliable navigation for advanced drone and UAV applications. Featuring multi-constellation GNSS support, this GPS unit tracks multiple satellite systems simultaneously to ensure fast satellite acquisition, improved accuracy, and strong signal reliability. The included protective case not only enhances durability but also simplifies mounting and installation on a variety of drone frames and robotic platforms. Equipped with an IST8310 compass and a high-performance antenna, this GPS module provides accurate heading information and robust signal reception, enhancing overall flight stability and control. Whether you’re conducting waypoint missions, autonomous navigation, or complex aerial maneuvers, the Holybro Micro M9N GPS With Case delivers dependable performance in both indoor and outdoor environments. Its lightweight design and advanced features make it an excellent choice for hobbyist builders and professional UAV developers alike. Features: Compact M9N GPS with case designed for accurate and reliable drone navigation. Supports multi-constellation GNSS for faster satellite lock and improved positioning accuracy. Integrated IST8310 compass provides precise heading and orientation data. High-performance antenna ensures strong signal reception and stable navigation. Protective case improves durability and simplifies installation on drone frames. Ideal for multirotor drones, UAV platforms, and autonomous navigation applications.

Holybro M10 GPS Standard GPS (GHR 1.25mm 10 pin) The Holybro M10 GPS Standard GPS (GHR 1.25 mm 10-pin) is a high-precision M10 GPS module engineered for reliable positioning and navigation in advanced drone applications. Featuring the powerful u-blox M10 series chipset, this GPS unit delivers fast satellite acquisition, improved signal sensitivity, and accurate location data to enhance flight stability and autonomous performance. Its standard connector and 10-pin interface make it easy to integrate with a wide range of flight controllers and UAV systems, ensuring seamless setup for custom builds and professional projects. Designed for both hobbyists and serious drone developers, the Holybro M10 GPS provides robust navigation feedback that helps maintain steady flight paths, enable precise waypoint missions, and improve return-to-home accuracy. The compact and lightweight module is perfect for multirotor drones, fixed-wing aircraft, and research UAVs that demand dependable positioning even in challenging environments. With its advanced u-blox technology and M10 series performance, this GPS unit enhances overall drone control and situational awareness for every flight. Features: High-precision M10 GPS module powered by advanced u-blox M10 series technology for accurate positioning. Fast satellite acquisition and strong signal sensitivity for reliable navigation performance. Standard GHR 1.25 mm 10-pin connector for easy and secure integration with flight controllers. Provides stable location data to support autonomous flight and return-to-home functions. Compact and lightweight design suitable for multirotor, fixed-wing, and UAV platforms. Ideal for professional drone applications, research projects, and advanced UAV builds.

SmartElex u-blox MAX-M10S GNSS Module Breakout The SmartElex u-blox MAX-M10S GNSS Module Breakout is a compact, ultra-low power GNSS module designed for precision positioning in battery-operated applications such as asset trackers, wearables, and IoT devices. Powered by the u-blox MAX-M10S GNSS receiver, it supports multi-constellation tracking including GPS, GLONASS, BeiDou, and Galileo while consuming less than 25 mW in continuous tracking mode. u-blox Super-S technology enhances RF sensitivity, enabling accurate location fixes even with small antennas and in non-line-of-sight conditions. An on-board rechargeable backup battery maintains the RTC and GNSS orbit data for up to 5 hours, reducing time-to-first-fix from a ~24 s cold start to a ~1 s hot start. The board includes an SMA connector for external antennas, 0.1″ spaced pins for breadboard use, and a UART interface compatible with standard serial adapters. Configuration options such as baud rate, update rate, spoofing detection, and interrupts can be easily managed using the u-blox u-center software, making this low power GNSS module a reliable choice for high-accuracy positioning applications. Note: The MAX-M10S's I2C address is 0x42, which is software programmable. A multiplexer/Mux is required to communicate with many MAX-M10S boards with the same address on a single bus. Features: 1.5m Horizontal Accuracy 10Hz Max Update Rate Hot: 1sMax Altitude: 80,000m Max G: ≤4 Max Velocity: 500m/s Velocity Accuracy: 0.05m/s Heading Accuracy: 0.3 degrees Time Pulse Accuracy: 30ns 3.3V VCC and I/O Current Consumption: ~6mA to ~25mA (varies with constellations and tracking state) Supports NMEA and UBX protocols over I2C or UART interfaces