DIY 1-Inch LED Electronic Clock Kit (White) – Light-Control MCU Display Set with Enclosure

The DIY Mini Wind Turbine Blade Set is a compact, vertical-axis wind turbine kit designed for educational, experimental, and small-scale renewable energy applications. Ideal for hobbyists, students, and engineers, this micro generator blade set enables hands-on learning about wind energy conversion and sustainable power generation. Each blade is precision-engineered for optimal aerodynamic efficiency at low wind speeds, making it perfect for indoor demonstrations or outdoor micro-generation setups. This set includes lightweight, durable blades compatible with most small DC generators and motors repurposed as generators. The vertical axis design ensures 360-degree wind capture, eliminating the need for yaw mechanisms and allowing operation from any wind direction. It's widely used in STEM education, science fairs, IoT energy harvesting prototypes, and off-grid sensor power systems. Easy to assemble and integrate, the kit supports experimentation with blade pitch, count, and generator coupling. Whether you're building a wind-powered charger, environmental monitoring station, or classroom demo, this turbine blade set offers a practical, low-cost entry into wind energy technology. Available for fast delivery across India.

DIY 51 MCU Electronic Clock Kit (Red) – 1" Light-Control LED Display with Assembly Case for STEM Projects This DIY 51 MCU Electronic Clock Kit offers an engaging way to learn core electronics and microcontroller concepts. It features a clear 1-inch LED digital display paired with an intelligent light-control function, ensuring visibility in different lighting conditions. The kit comes unassembled, allowing learners to understand every part of the build, from wiring to mounting, while gaining confidence in practical electronics. Designed for STEM and STEAM education, this kit encourages curiosity, experimentation, and hands-on problem-solving. It's an excellent tool for students, hobbyists, and makers looking to explore timekeeping circuits and microcontroller basics. Whether used in classrooms or at home, it helps develop creativity, scientific thinking, and technical skills through a fun, interactive building experience. Features: DIY microcontroller-based clock kit for hands-on learning and experimentation. Equipped with a bright 1-inch LED digital display and automatic light-control function. Includes pre-cut housing and all necessary electronic parts for easy assembly. Supports STEM/STEAM skill development in electronics, engineering, and problem-solving. Helps nurture creativity, observation, and practical building ability. Suitable for home learning, school labs, and maker workshops. Comes with a study-style instruction manual for guided learning.

SmartElex 5-inch TFT LCD Capacitive Touch Display 800×480 SmartElex 5-inch TFT LCD Capacitive Touch Display (800×480) is a compact graphical interface solution designed for students, hobbyists, engineers, and product developers who need a responsive touchscreen for their projects. It provides a clear and smooth display experience, making it ideal for building user interfaces in prototypes, educational projects, and small production devices. With its capacitive touch panel, users can interact effortlessly through precise touch inputs, making it suitable for applications that need intuitive control and quick navigation without external buttons or controls. This display is well-suited for robotics dashboards, IoT control panels, industrial monitoring, and home automation systems that require real-time interaction. It can be integrated with popular microcontrollers and development platforms like Arduino, Raspberry Pi, and ESP32 through appropriate interface modules, allowing makers and startups to develop projects with minimal setup time. The robust build and consistent touch response help ensure reliable performance in long-term installations, while the versatile visual output supports both experimentation and final project deployment in labs, workshops, and field environments. Features: Bright and clear 5-inch TFT LCD screen with high-resolution visuals for sharp graphics and text Responsive capacitive touch interface for smooth and accurate touch control Wide viewing angles and good color reproduction for easy visibility from different directions Compatible with development platforms like Arduino, Raspberry Pi, and ESP32 with suitable interface support Suitable for interactive user interfaces in robotics, IoT devices, automation systems, and custom control panels Durable design for regular use in prototyping and finished electronic projects

SmartElex ILI9341 3.2-inch TFT LCD display 240×320 SmartElex ILI9341 3.2-inch TFT LCD Display (240×320) is a vibrant and easy-to-use screen designed for projects that need a larger visual interface without adding complexity. This 3.2-inch TFT display offers enough space to clearly show text, graphics, menus, and real-time data, making it an excellent choice for students, hobbyists, engineers, educators, and startups who want to build user interfaces, data monitors, or handheld devices. It provides a practical way to upgrade visual output in embedded systems without jumping to high-cost or oversized display solutions. Powered by the ILI9341 driver, this display works smoothly with Arduino, Raspberry Pi, ESP32, and similar development boards, enabling simple integration into robotics dashboards, IoT terminals, automation panels, smart controllers, and prototyping projects. Its SPI communication allows straightforward wiring and dependable performance, supporting responsive visual updates for both experimentation and final builds. Whether you're designing a learning project, developing a prototype product, or creating a functional control interface, this display offers a reliable foundation with clear and colorful output suitable for everyday electronics development. Features: 3.2-inch 240×320 TFT LCD panel for clear visual output ILI9341 display driver for stable and smooth rendering Multiple interface options: SPI or parallel for flexible integration RGB565 color format for rich and vibrant graphics Works with Arduino, Raspberry Pi, ESP32, and similar platforms Perfect for UI screens, monitoring panels, and embedded system displays

51 MCU LED Digital Clock DIY Kit (Green) – 1-Inch Light-Control Display with Housing for STEM Learning This 51 MCU Digital Clock DIY Kit is a hands-on educational project designed to help learners understand the basics of microcontrollers, electronics, and digital circuits. With a bright 1-inch LED digital tube display and built-in light-control functionality, the clock provides a clear and interactive way to explore timekeeping principles. The kit includes all essential components along with a sturdy housing, making it a great introduction to real-world electronics assembly.Perfect for STEM and STEAM learning, this kit encourages creativity, analytical thinking, and problem-solving skills. Designed for beginners, students, and hobbyists, it allows users to experience practical electronics in a fun and engaging way. Whether used in classrooms, workshops, or home-learning environments, the DIY digital clock helps children and young adults build confidence through hands-on exploration and experimentation. Features: Hands-on DIY digital clock kit powered by a 51 microcontroller system. Bright 1-inch LED digital tube display with light-control functionality. Includes durable housing and all required components for assembly. Great for STEM/STEAM learning: science, technology, engineering, art, and math. Helps build creativity, practical skills, observation, and problem-solving abilities. Ideal for school projects, family learning, and maker workshops. Easy-to-follow study guide included for step-by-step learning.

Waveshare 3.5inch Capacitive Touch LCD IPS Display Module 320×480 The Waveshare 3.5-inch Capacitive Touch LCD IPS Display Module is a compact yet powerful display solution featuring a 320 × 480 pixel resolution that delivers crisp visuals and excellent clarity. Designed with an IPS panel, it offers wide viewing angles and consistent color performance, making it ideal for graphical interfaces and interactive applications. The module integrates the ST7796S display driver for reliable display control and the FT6336U capacitive touch controller for accurate, multi-touch responsiveness. Optimized for embedded development, this 3.5 inch LCD Raspberry Pi display is perfectly suited for Raspberry Pi projects, control panels, and custom HMI applications where space, touch precision, and visual quality matter. Features: 320×480 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded with ST7796S driver chip and FT6336U capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins Onboard TF card slot for storing more pictures, videos, music, etc. Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board Onboard voltage translator, compatible with 3.3V / 5V operating voltage Comes with online development resources and manual (examples for Raspberry Pi / ESP32 / Raspberry Pi Pico / Arduino) SPI and I2C Control Interfaces: Pin Description 15PIN Pin No. 18PIN Pin No. VCC Power (3.3V / 5V input) 1 1 3V3 Power (3.3V input) 2 NC GND Ground 3 3 MISO SPI MISO pin 4 6 MOSI SPI MOSI pin 5 5 SCLK SPI CLK pin 6 4 SD_CS TF card chip selection, low active 7 10 LCD_CS LCD chip selection, low active 8 9 LCD_DC LCD data/command selection (high for data, low for command) 9 7 LCD_RST LCD reset pin, low active 10 8 LCD_BL LCD backlight pin 11 2 TP_SDA Touch panel data pin 12 14 TP_SCL Touch panel clock pin 13 13 TP_INT Touch panel interrupt pin 14 15 TP_RST Touch panel reset pin, low active 15 12

1-Inch LED Digital Display DIY Clock Kit (Blue) – Light-Control MCU Project Set with Casing This DIY LED Digital Clock Kit is an excellent hands-on project for anyone interested in learning how microcontroller-based circuits work. Built around a 51-series MCU, it features a bright 1-inch LED tube display and an automatic light-sensing function that adjusts brightness according to the environment. The kit arrives as individual components, giving learners the opportunity to assemble, solder, and understand every part of the circuit. Created with STEM and STEAM education in mind, this kit helps improve logical thinking, practical assembly skills, and fundamental electronics knowledge. Whether used in a school lab, a maker space, or a home learning setup, it offers a fun and meaningful way to encourage creativity, experimentation, and scientific curiosity. The included housing completes the project with a clean, finished look once assembled. Features: DIY digital clock project featuring a 1-inch LED display for clear time reading. Light-sensing feature ensures suitable brightness in different lighting conditions. Comes as a complete unassembled kit to promote hands-on learning. Strengthens STEM/STEAM concepts such as circuitry, design, and problem-solving. User-friendly build suitable for classrooms, hobbyists, and beginners. Includes a protective enclosure for a neat and durable finish. Includes study instructions to guide the assembly process.

ESP32 LoRa with 0.96 Inch Blue OLED Display ( Type C- Connector) The ESP32 LoRa SX1278 is a next-generation IoT development board made for smooth connectivity and long-range, low-power communication. The Tensilica LX6 dual-core ESP32 processor (240MHz, 520 KB SRAM, 600 DMIPS) powers it. The esp32 wifi module for Arduino  has dual-mode Bluetooth (Classic + BLE) and Wi-Fi (802.11 b/g/n HT40) for fast, flexible networking. This esp32 lora module provides ultra-long-range transmission up to 2.6km with an inbuilt SX1278 LoRa modem, 433MHz, -148dBm sensitivity, and +20dBm output power, guaranteeing great dependability for distant Internet of Things applications. It has a CP2102 USB-to-serial chip, a 0.96-inch OLED display, 32MB Flash, and lithium battery charging. It was designed with efficiency and innovation in mind. This ESP32 with an OLED display  is completely compatible with Arduino, enabling developers to design intelligent, scalable solutions for the Internet of Things' future. Check out our collection of LoRa Modules ! Features: Uses Lexin ESP32 as main controller and SX1278 as wireless communication module. Comes with an OLED display. Supports Bluetooth and WiFi connectivity. ESP32 chip is based on Tensilica Xtensa LX6 dual-core microprocessor with operating frequency up to 433MHz. High sensitivity of about -148dBm. Power output of +20 dBm. Operates on 433MHz-510MHz frequency range. Suitable for remote modem applications that require long-range wireless communication. ESP32 LoRa Pinout: Applications Smart industrial devices, including Programmable Logic Controllers (PLCs) Smart medical devices, including wearable health monitors. Smart energy devices, including HVAC and thermostats. Smart security devices, including surveillance cameras and smart locks.

3.5in TFT LCD Shield for Arduino The 3.5" TFT LCD Display Shield for Arduino has been fully assembled, tested, and is ready to use. Install the TFT display without any wiring or soldering! Simply plug it in and load a library; you'll be up and running in less than 10 minutes! It works best with any traditional Arduino ATMEGA328 board. So add a beautiful display shield with a built-in microSD card connection to your Arduino project. This TFT LCD is large (3.5?? diagonal), bright (4 white LED backlights), and colorful (262,000 different shades)! The TFT display has 480x320 pixels and individual pixel control. It has a significantly higher resolution than a black and white 128x64 display. Check out Best 3.5-inch Touch Screen for Raspberry Pi Precautions while using the 3.5in TFT LCD Display Shield The control and driving circuit of this display module is low voltage and the FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is irreparable damage, and sometimes humans have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity: Using soldering iron or power FRIDA tools must be well grounded and operate, make them without leakage. Do not use your hand to touch the leads, circuit boards and metal boxes. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity; When the air is dry, can also generate static electricity, therefore, workshop humidity shall be above RH60%. If it is necessary to direct contact it , should enable the human body in the same potential with the modules? ,or make human body be well grounded. Remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing. Electrostatic damage or man-made damage is not within the scope of the warranty. Features: Arduino 3.5" diagonal TFT LCD Display Shield. Fully assembled, tested, and operational. Installation doesn't involve any wiring or soldering. Optimally functions with conventional Arduino ATMEGA328 boards. Has an integrated microSD card slot. Big display with a diagonal dimension of 3.5". Four white LED backlights make it bright. Vibrant with 262,000 distinct tones. 480x320 pixels at a high resolution with individual pixel control. Supports Arduino compatible boards, PIC, STM32, and AVR boards. Applications: DIY projects that require visual displays. Arduino-compatible gadgets and devices. Embedded systems. Prototyping User Interfaces. Creating Interactive Artworks. Educational presentations and experiments. Data-logging and visualization projects. Environmental monitoring systems. Games and entertainment apps. Displays used for industrial control and automation. Interfacing 3.5 INCH TFT Display Shield with Arduino

0.91 inch Blue OLED Display Module This 0.91 inch Blue OLED Display Module has a resolution of 128x32 pixels. They are much thinner than LCD displays with good brightness and produce more accurate and true colors. This OLED Display Module is very compact and will enhance your Arduino project's user interface experience. This is an I2C OLED display, The I2C (also known as IIC) serial interface is used to connect this display to Arduino. OLEDs are the future of displays because they have some of the most significant advantages over both conventional display technologies, LCDs and LEDs. The most appealing aspect of using OLED displays is that they do not require a backlight like conventional LCD/LED screens. Electroluminescence (EL) is a property of organic materials that causes them to "glow" when stimulated by a current or an electric field. The most energy-efficient displays ever!!! When powered by a DC 2.8V supply, the 0.91 inch 128x32 Blue OLED Display Module produces White text on a Blue background with excellent contrast. The OLED Display Modules have a very wide viewing angle as well. If you want to use this OLED display module in your Arduino project, for that you will need few essential components like Jumper wires Breadboard Batteries or power supply Pin Description: GND: Power ground VCC: Power positive SCL: Clock Line SDA: Data Line Features: No need of the backlight The display is self-illuminating Power requirement is low They are offering the large viewing angle Better performance characteristics than traditional LCD and LED displays. Check out our wide range of collection of OLED display modules which are reliable, durable, and top-performing displays every time.

SmartElex IIC/I2C Serial Interface Adapter Module – LCD Display Interface Converter Board The SmartElex Serial Interface Adapter Module is a compact and efficient board designed to simplify the connection between your Arduino or microcontroller and an LCD display. Instead of using multiple pins for data, this adapter lets you send commands using just two lines - SDA and SCL - through the I2C communication protocol. This I2C Serial LCD Daughter Board helps convert serial data into parallel data, allowing your LCD display to work with minimal wiring. It’s perfect for 16x2 and 20x4 character LCDs, making it easier to create clean and space-saving circuit designs. Ideal for DIY electronics, IoT prototypes, and Arduino projects, this I2C serial data to parallel data for the LCD display module saves time, reduces wiring clutter, and improves project efficiency. Whether you’re a beginner or an experienced maker, it’s a must-have for smooth LCD interfacing. Features: Easy LCD Connectivity: Converts I2C serial data to parallel data for the LCD display, reducing wiring complexity. Supports Multiple Displays: Compatible with 16x2 and 20x4 character LCD modules, commonly used in Arduino projects. Saves I/O Pins: Uses only two communication lines (SDA & SCL) instead of several data pins. Adjustable Display Contrast: Comes with a built-in potentiometer for easy brightness and contrast control. Plug-and-Play Design: Works smoothly with Arduino, ESP32, Raspberry Pi, and other microcontrollers. Compact & Efficient: The small I2C Serial LCD Daughter Board fits neatly into any project setup without clutter.

0.96in 6 pin OLED Display This is the 0.96 inches (2.44 cm) OLED Display Module is a precise small, This OLED module can be interfaced with any microcontroller using SPI protocol. It is having a resolution of 128x64. OLED (Organic Light-Emitting Diode) is a self-lighting technology that consists of a thin, multi-layered organic film sandwiched between an anode and a cathode. OLED, unlike LCD technology, does not require a backlight. OLED has a wide range of applications and is widely regarded as the ultimate technology for the next generation of flat-panel displays. The basic structure of an OLED Display Module is made up of organic materials sandwiched between the cathode and the anode, which is made of electric conductive transparent Indium Tin Oxide (ITO). The organic materials form a multi-layered thin film that includes the Hole Transporting Layer (HTL), Emission Layer (EML), and Electron Transport Layer (ETL) (ETL). By applying the appropriate electric voltage, holes and electrons from the anode and cathode are injected into the EML. Inside the EML, holes and electrons combine to form excitons, which cause electroluminescence. The key factors that determine the quality of OLED components are the transfer material, emission layer material, and electrode selection. It can be used with either an SPI or a USB interface, which can be selected by soldering two jumpers on the back. The design is entirely 5v-geared, with an onboard regulator and built-in raise converter. It's now easier than ever to connect your 3v or 5v microcontroller without the use of a stage shifter. If you want to use this OLED display module in your Arduino project, for that you will need few essential components like Jumper wires Breadboard Batteries or power supply Features: Better resolution and viewing angle than traditional LEDs Support for bit map images Bright and crisp display under various lighting conditions Only Need 2 I/O Port to Control Full Compatible with Arduino Pin Description: GND: power ground. VCC: 3.3V or 5V power supply. SCL: CLK Clock. SDA: MOSI data. RST: Reset. DC: Data / Command.

Electronics Kit (Computer Science) for Grade 7 The components included in the electronics kits for computer science purposes and applications are manufactured and curated with the best quality. The components of the kit are listed below with their quantity. Small DC Motor: A DC 3V Mini Motor For Arduino DIY Smart Car. this DC 3V Mini Motor For Arduino DIY Smart Car is used in making science projects for school. LED: 5mm Clear LEDs. These are the very common LEDs that are used in all types of electronic projects. 2 AA Batteries Holder: Black Plastic Storage Box Case for 2 x AA Battery Cells, without Cover. The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for devices that need a 3V external battery. Wire: The High-Quality Wire 1m (Black) + 1m (Red) pair has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. Ideal for your project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Mini Breadboard: The 170 Points breadboard is named for its 170 tie points. It has 17 columns of 10 holes, which are separated into two pairs by a central notch, and labeled 1 to 17. It comes with the adhesive back for easy attachment with the application. They're useful for basic prototyping. They are the modern breadboards, a plug-and-play way to make connections between electronic components. 220 Ohm Resistor: An electrical component that limits or regulates the flow of electrical current in an electronic circuit.

SmartElex Basic 4.0″ HMI Display – 320×480 TFT Screen with Resistive Touch and UART Interface The SmartElex Basic 4.0″ HMI Display is a powerful and compact touchscreen module designed for creating smooth and interactive visual interfaces. With a 320×480 resolution and resistive touch panel, it delivers sharp visuals and responsive input, making it ideal for industrial control panels, smart home devices, and automation projects.This HMI display module offers easy connectivity through a 4-pin UART interface and supports micro-SD storage for firmware and images. You can easily design your custom GUI using Robu’s HMI Editor Software, which provides a drag-and-drop interface and pre-built widgets perfect for beginners and professionals alike. Its low power consumption and USB Type-C support make it both efficient and convenient for a variety of embedded systems. Features: 4.0-inch TFT display with 320×480 pixel resolution for clear visuals. Resistive touch panel for accurate input and smooth user interaction. 4-pin UART interface (115200 baud rate) for simple communication. On-board micro-SD slot for firmware, images, and UI storage. Supports USB Type-C external power input. Low power consumption (5V, 650mA) for energy-efficient performance. Compact and durable design suitable for various embedded applications.

TM1637 4 Digit 7 Segment LED Display The TM1637 4 digit 7 Segment LED Display is a low-cost solution for displaying Arduino project output data. Though the data displayed is limited to numbers, users can also display characters such as A, B, C, and so on. The TM1637 Driver Chip controls the 4 digits on this 7 segment display. This TM1637 4 Bits Digital Tube LED Display Module can be controlled with just two wires. Also, thanks to the I2C Bus, you can control it with only two wires, freeing up more pins on your Microcontroller for other purposes. The module is a 12-foot clock with four common anode tube (0.36 inch) display module for driver IC TM1637, with only two signal lines allowing the MCU to control four 7-segment digital tubes. If you want to use this 4 digit 7 segment display module in your Arduino project, for that you will need few essential components like jumper wires breadboard batteries or power supply TM1637 4 Digit 7 Segment LED Display pin Diagram Pinout : 1 CLK Clock Input Pin 2 DIO Data Input/Output Pin 3 VCC 3.3V to 5V power supply Pin 4 GND Ground Pin Applications: Can use as a 4-digit display unit. Can use as a clock display DIY clock project. 4 digit display unit. Electrical/Electronic projects. The counter project using 7 segment display.