Arduino IOT Bundle

Female to Female Jumper Wires (20cm) 40pcs These are 20cm 40pcs Female to Female Jumper wires, very Flexible and easily detachable. These jumper cables have 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly Dupont cables are useful with Orange Pi, Banana Pi, Raspberry Pi , Arduino , and other mini PCs and development boards . It is very useful in the PCB project, PC motherboard, as well as Breadboard connections. Additionally, these jumper wires allows you to plug and unplug easily for prototyping and can be used over and over again. Check out the best selection of Jumper Wires . Applications: Raspberry Pi Arduino PCB projects Breadboard connections Get a complete set of M2M, M2F, F2F Jumper Wires Set for DIY projects.

A3967 Stepper Motor Driver This A3967 Stepper Motor Driver For Arduino is the most recent version of EasyDriver v44, which was created in collaboration with Brian Schmalz. When compared to previous versions, it offers more flexibility and control over your stepper motor . It is a simple stepper motor driver that is compatible with most microcontrollers and capable of producing a digital 0 to 5V pulse (0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). A 7V to 30V power supply is required for the module's motor. The digital interface is powered by an onboard voltage regulator that can be set to 5V or 3.3V. The A3967 is a full-featured microstepping motor driver with an integrated transistor. It is intended for use with bipolar stepper motors in full-, half-, quarter-, and eighth-step modes, with output drive capabilities of 30 V and 750 mA. The A3967 comes with a fixed off-time current regulator that can operate in slow, fast, or mixed current-decay modes. This current-decay control scheme produces less audible motor noise, higher step accuracy, and lower power dissipation. The transistor is essential to the A3967's simple implementation. Simply sending one pulse to the STEP input causes the motor to move one step (full, half, quarter, or eighth depending on two logic inputs). It is not necessary to programme phase-sequence tables, high-frequency control lines, or complex interfaces. The A3967 interface is ideal for applications where a complex P is either unavailable or overburdened. Features: A3967 microstepping driver Adjustable current control from 150mA/phase to 750mA/phase MS1 and MS2 pins are broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth) Compatible with 4, 6, and 8-wire stepper motors of any voltage Breadboard-compatible pins.

CNC Shield for Arduino The CNC shield for Arduino has total four slots, can drive 4 A4988 stepper motors. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. The CNC Shield V3.0 allows you to build a engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. There are 4 slots on the board for plugging in stepper motor drive module which can drive 1 stepper motor each. Controlling each step stepper motor requires only two IO pins on the Arduino. Just insert this Arduino CNC Shield V3.0 onto an Arduino UNO , and install the GRBL firmware, you can then quickly build a DIY CNC engraving machine. This arduino shield is very convenient to use and is suitable for development boards compatible with Arduino. This CNC shield compatible with Arduino is the latest version of the CN shield model (V 3.0). The CNC Shield is GRBL 0.9 compatible and with the help of jumper wires , it is accessible to stepper drivers. Features: Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)

CNC Shield + UNO R3 Board compatible with Arduino + 4xDRV8825 Driver Kit Arduino Uno is an open-source microcontroller used by students and hobbyists entering the world of DIY electronics and automation, The Arduino Uno can be used for any application including being the brains of your next DIY 3D printer and/or CNC router The CNC Shield V3.0 allows you to build an engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. Along with that, the CNC shield allows you to control up to four stepper motors by mounting on 4 stepper motor drivers, included with this kit The DRV8825 provides an integrated motor driver solution for printers, scanners, and other automated equipment. The device has two H-bridge and is intended to drive a bipolar stepper motor. Features: UNO R3 Board: The main microcontroller board compatible with Arduino. CNC Shield: An expansion board that allows for easy connection and control of stepper motors. 4x DRV8825 Stepper Motor Drivers: High-performance drivers for controlling stepper motors. Micro-Stepping: Supports micro-stepping settings for precise control of stepper motors. GRBL Compatibility: Compatible with GRBL firmware, which is widely used for CNC control. Voltage Range: Operates on 12-36V DC. Heat Sinks: Included for cooling the stepper motor drivers. USB Cable: For connecting the UNO R3 board to a computer. 40-Pin Row Needles: For additional connections. Applications: CNC Machines: Used for controlling stepper motors in CNC milling, engraving, and cutting machines. 3D Printers: Essential for driving stepper motors in 3D printers, ensuring precise layer deposition and movement. Laser Cutters: Controls stepper motors in laser cutting machines for accurate cutting and engraving. Robotics: Ideal for robotics projects requiring precise motor control, such as robotic arms and automated guided vehicles (AGVs). X-Y Tables: Used in X-Y tables for accurate positioning and movement in various industrial applications. Pick-and-Place Devices: Employed in pick-and-place machines for accurate component placement in electronics manufacturing. Labeling Machines: Used in labeling machines for precise label application. Pinout Diagram for the Arduino Uno Microcontroller Applications of the Kit The kit can be used to create custom 3D printers, scanner, CNC mills and other automated equipment applications

Cytron ESP8266 WiFi Shield for Arduino with WROOM-02 Module The Cytron ESP8266 WiFi Shield is a beginner-friendly, plug-and-play solution that makes adding WiFi connectivity to Arduino projects incredibly easy. Powered by the reliable ESP8266 WROOM-02 module, this shield eliminates the wiring complications and level-shifting issues commonly faced when using standalone ESP modules. With preloaded Cytron_ESP_AT Firmware V2.2.0, onboard 3.3V regulation, selectable UART pins, and support for AT-command control, it is the perfect choice for IoT applications, wireless sensor systems, home automation, and connected electronics. Designed with the Arduino R3 layout, this WiFi shield works seamlessly with Arduino UNO, Maker UNO, CT-UNO, CT-ARM, and various compatible boards. It also offers direct programming access to the ESP8266, breakout I/O pins, and optional microSD card support for data logging. Whether you're uploading custom firmware or using AT commands for WiFi communication, the Cytron ESP8266 WiFi Shield delivers stable wireless performance, strong signal output, and unmatched ease of integration, making it ideal for both beginners and advanced IoT developers. Features: Compatible with Arduino R3 layout boards including Maker UNO, CT-UNO, CT-ARM, Arduino UNO R3, and Arduino Leonardo. Preassembled with ESP8266 WROOM-02 module and flashed with Cytron_ESP_AT V2.2.0 firmware. Onboard 3.3V regulator capable of supplying up to 500mA for stable WiFi operation. Selectable UART/Serial communication via mini jumpers (USB, hardware serial, software serial options). Supports 802.11 b/g/n, Wi-Fi Direct (P2P), Soft-AP mode, and full TCP/IP protocol stack. Integrated TR switch, balun, power amplifier, LNA, PLLs, regulators, and 32-bit CPU. +19.5 dBm output power for strong wireless range. Breakout pins available for programming or full I/O access of WROOM-02. Includes optional microSD slot for data logging and local storage. Each shield is fully assembled and tested before shipping.

7Semi PCA9306 I2C Bidirectional Voltage Level Translator Breakout Board The 7Semi PCA9306 I2C Bidirectional Voltage Level Translator Breakout Board is a compact and efficient PCA9306 voltage level translator designed to safely interface I2C and SMBus devices operating at different logic levels. Supporting voltage translation from 1.2V to 5.0V, this board enables seamless communication between low-voltage sensors and higher-voltage microcontrollers without manual direction control. As a dependable I2C logic level converter, it delivers minimal signal delay and stable bidirectional data flow, making it ideal for robotics, industrial controllers, embedded systems, and DIY electronics projects requiring precise mixed-voltage I2C communication. Allowable Voltage Level Translation The breakout can transfer voltages ranging from 3.3V to 5V. VREF1 (Low Side) VREF2 (High Side) 1.2V 1.8V, 2.5V, 3.3V, 5V 1.8V 2.5V, 3.3V, 5V 2.5V 3.3V, 5V 3.3V 5V Features: Wide Voltage Range Support: Operates between 1.2V and 5.0V, accommodating a wide range of components. Dual Bidirectional Channels: Translates both the SDA and SCL lines for complete I2C compatibility. I2C and SMBus Protocol Support: Fully compatible with regular and fast-mode I2C devices, as well as SMBus peripherals. No Direction Pins Required: Signal direction is automatically detected for easier design. Low propagation delay: A delay of less than 1.5ns maintains data integrity at high speeds. 5V Tolerant I/O Ports: Securely links 5V signals to lower voltage devices. Compact and simple to use: ideal for embedded applications, prototyping, and compact systems.

7Semi SGP41 VOC Sensor Breakout Board for Indoor Air Quality Monitoring The 7Semi SGP41 VOC Sensor Breakout Board is a compact and reliable solution for monitoring indoor air quality with high precision. Built around Sensirion’s advanced SGP41 sensing technology, this VOC Sensor accurately detects volatile organic compounds, helping assess air freshness and pollution levels in real time. Operating at an exact 3.3V and communicating via an I2C interface, it integrates smoothly with popular microcontrollers and development boards. The onboard Qwiic connector simplifies wiring, making this air quality VOC sensor ideal for applications such as air purifiers, HVAC systems, smart buildings, and long-term environmental monitoring where accuracy and stability matter. Leverage the power of the SGP41 to create innovative air quality solutions. Whether you're developing air purifiers, ventilation systems, or environmental monitoring devices, this sensor breakout is your essential component. Features: Sensirion SGP40 Sensor: Provides accurate VOC and NOx detection for better air quality assessments. The Digital I2C Interface simplifies communication and integration with your system. Robust Construction: Designed to endure real-world situations while maintaining long-term stability. Compact design is ideal for applications that require limited space. Easy integration: Solderable headers allow for a simple connection.

Official Arduino UNO Q SBC 4GB ABX00173 The Arduino UNO Q SBC 4GB ABX00173 is a powerful and humanized dual-brain development platform designed to seamlessly bridge high-performance computing with real-time control. Featuring a Linux® Debian-capable Qualcomm® Dragonwing™ QRB2210 microprocessor alongside a real-time STM32U585 microcontroller (MCU), this 4GB variant delivers enhanced memory capacity for demanding AI-driven applications. Whether you're building systems for object recognition, voice commands, motion detection, or other intelligent edge applications, the Arduino UNO Q 4GB provides the perfect balance between a full-fledged single-board computer and precise microcontroller control. It’s not just Arduino—it’s a complete innovation platform ready to power your next advanced project. This edition of Arduino UNO Q has 4 GB of RAM and 32 GB of eMMC, making it the best choice if: You plan to use UNO Q in single-board computer (SBC) mode. Your application requires numerous high-level processes to execute at the same time. You intend to use larger, more complex AI or machine learning models (such as high-resolution computer vision or advanced audio processing). You'll need enough of built-in storage for logs and data, as well as a strong development environment. The Arduino UNO Q is the ideal tool for prototyping your next robotics or IoT project because: All-in-One Toolbox: The Arduino UNO Q is a versatile tool that combines the Dragonwing™ QRB2210 microprocessor (MPU) with a real-time STM32U585 microcontroller (MCU), making it ideal for any project. AI in a blink: Discover AI-powered vision and sound solutions that respond to their surroundings. Millions of Arduino users have created libraries, sketches, and projects for the UNO ecosystem. Compatible with the Arduino UNO ecosystem: UNO Q is compatible with a wide range of Arduino hardware, including old UNO shields and new carriers, as well as Modulino® nodes and third-party modules via the Qwiic connector. Streamlined software experience: In addition to the Arduino IDE and Arduino Cloud, you can get started with a plethora of pre-built examples and AI models available through Arduino App Lab. Seamless, unified development: create classic Arduino Sketches, code in Python® using the pre-installed Linux® Debian OS, or combine the two from a single interface - easy with Arduino App Lab. What is the Arduino App Lab? Unified Developer Experience App Lab is a brand-new comprehensive development environment that unifies the journey from Linux® to real-time OS. Preloaded on the UNO Q, App Lab combines Arduino Sketches, Python® scripts, and containerized AI models to create fully integrated applications that can be administered from a single interface. Ready-to-use Apps and Bricks Get started quickly with Arduino Apps, self-contained examples that include everything you need. Add plug-and-play capabilities to your projects using pre-built Bricks to help you push your ideas even further. Pre-loaded AI models With pre-loaded AI models in Arduino App Lab, you can use real-world data for a variety of tasks, including object/human detection, anomaly detection, image categorization, sound recognition, and keyword spotting. Find out more in the official documentation . Features: Microprocessor: Qualcomm® Dragonwing™ QRB2210 Microcontroller: Real-time, low-power STM32U585 MCU RAM: 4 GB LPDDR4 Storage: 32 GB eMMC built-in (no SD card required) Connectivity: Dual-band Wi-Fi® 5 (2.4/5 GHz), Bluetooth® 5.1 High-speed headers: Power advanced peripherals – vision, audio, display Classic UNO headers: Mount shields to add capabilities LED matrix: 8 x 13 LED matrix for visual creation and feedback USB-C connector: Power delivery, video output, or connect keyboard, mouse, USB microphones or USB cameras via dongle Qwiic connector: Expand easily with Modulino® nodes – no soldering required

7Semi MMC5983MA 3-axis Mini Magnetometer Sensor Breakout Module The 7Semi MMC5983MA 3-axis Mini Magnetometer Sensor Breakout Module is a high-precision magnetic sensor designed to measure magnetic fields along three axes with excellent accuracy and stability. It supports a magnetic field range of ±8 Gauss, delivering ultra-low noise and high-resolution output for reliable data. Communicating through a standard I2C interface, this magnetometer sensor ensures low power operation and fast response, making it ideal for navigation systems, orientation tracking, digital compasses, and magnetic anomaly detection. Its compact form factor allows seamless integration into space-constrained electronics, IoT devices, and embedded applications where precise magnetic sensing is essential. Features: Triple-Axis Magnetic Sensing provides great precision across three axes, with 0.4mG resolution and ±0.5° heading accuracy. High Dynamic Range and Resolution: ±8G FSR, 18-bit operation for precise measurements. Built-in Degaussing Circuitry: Effectively eliminates residual magnetization, ensuring consistent performance even when exposed to high external magnetic fields. Advanced Compensation Features: On-chip sensitivity and temperature compensation ensure consistent readings under changing situations. Fast I2C Communication: The I2C protocol has a fast mode of up to 400KHz, allowing for easy integration with other devices. The energy-efficient design consumes only 1µA during power down, making it excellent for power-sensitive applications. Compact form factor: A small PCB layout with a horizontal 4-pin 2mm pitch JST connection, ideal for space-constrained applications.

SmartElex TEMT6000 Ambient Light Sensor Breakout The SmartElex TEMT6000 Ambient Light Sensor Breakout is a compact sensor module designed to detect ambient light levels and convert them into an analog signal for easy measurement. It helps users sense brightness in the environment without complex circuitry, making it suitable for students, hobbyists, educators, and engineers working on light-responsive projects. As a beginner-friendly module, it is ideal for learning how light sensors work, experimenting with interactive electronics, or integrating illumination detection into early-stage prototypes. This ambient light sensor breakout is commonly used in IoT devices, robotics, display dimming systems, smart lighting, and automation setups where real-time light intensity data is required. It connects smoothly with development boards like Arduino, Raspberry Pi, and ESP32, enabling quick setup and data integration for testing and project development. With stable performance and simple analog output, the SmartElex TEMT6000 is a practical choice for DIY electronics, classroom projects, and embedded product concepts focused on light-based control and automation. Features: Detects ambient light levels and outputs an analog signal Compact breakout board for easy integration into projects Simple interfacing for quick setup and testing Works smoothly with Arduino, Raspberry Pi, and ESP32 Ideal for smart lighting, display dimming, and IoT applications Great for education, prototyping, and light-based automation projects

7Semi DS18B20 2M Cable Waterproof Digital Temperature Probe The 7Semi DS18B20 2M Cable Waterproof Digital Temperature Probe is built for anyone who needs precise and stable temperature monitoring in challenging environments. With its stainless-steel sealed casing and durable 2-meter cable, this sensor delivers highly accurate readings, even when fully submerged or installed in remote locations. Whether you're monitoring aquaponics systems, greenhouse conditions, or industrial temperature processes, this digital probe ensures you get consistent and reliable data every single time. Designed with a simple 1-Wire digital interface, the DS18B20 works seamlessly with Arduino, Raspberry Pi, ESP boards, and other microcontrollers, making it ideal for hobbyists, engineers, and automation enthusiasts. Its long cable, waterproof build, and wide temperature range make it a versatile choice for environmental monitoring and precision-driven applications where stability and robustness matter the most. Features: Measures temperatures from –55°C to +125°C, making it suitable for industrial, environmental, and underwater applications. Provides ±0.5°C accuracy, ensuring stable and trustworthy readings. Fully waterproof stainless-steel enclosure protects against moisture, corrosion, and rugged terrain. Comes with a 2-meter high-strength cable to support remote, underwater, or difficult-to-access installations. Supports 9–12 bit resolution and easily integrates using its 3-wire connection and 1-Wire digital protocol.

7Semi BME680 Temperature, Humidity, Pressure & Air Quality Sensor Breakout with Qwiic Interface The 7Semi BME680 Environmental Sensor Breakout is a compact yet powerful module designed for applications that require accurate measurement of temperature, humidity, pressure, and indoor air quality. Built around the trusted Bosch BME680 sensor, it provides dependable multi-parameter environmental data in real time, making it ideal for IoT projects, smart home automation systems, and portable environmental monitoring devices. Its efficient gas sensor intelligently detects VOC levels, helping you assess indoor air quality with ease. Engineered for universal compatibility, this breakout includes both a voltage regulator and level shifter, enabling seamless integration with 3.3V and 5V microcontroller platforms such as Arduino and Raspberry Pi. The Qwiic connector and I2C/SPI support ensure quick setup without messy wiring, while its compact size makes it perfect for wearables and space-constrained builds. With low-power operation, stable readings, and selectable I2C addresses, this module provides developers with a simple and reliable way to enhance environmental sensing in modern embedded projects. Features: Provides accurate measurement of temperature, humidity, pressure, and VOC-based air quality, making it an all-in-one environmental sensor solution. Supports I2C and SPI communication, ensuring smooth integration with Raspberry Pi, Arduino, ESP32, and other development boards. Includes selectable I2C addresses (0x76/0x77) to allow multiple sensors on a single bus without conflicts. Features a built-in voltage regulator and level shifting circuitry, allowing safe use with both 3.3V and 5V systems. Designed with low power consumption, suitable for long-term, battery-powered, or portable applications. Comes in a compact 19×19 mm breakout form factor, perfect for handheld devices, IoT wearables, and mini weather stations. Provides stable VOC readings after a short burn-in time, ensuring reliable indoor air quality measurements.

SmartElex 10A 5V 1-Channel Relay Module The SmartElex 10A 5V 1-Channel Relay Module is a compact and dependable low level trigger relay module designed to control high-power devices using low-voltage microcontrollers. Operating at 5V DC, this single channel relay module features an SPDT relay rated for 10A at 250VAC, making it suitable for switching lights, motors, pumps, and other appliances. Its isolated input circuitry helps protect sensitive control boards from voltage spikes, while the onboard pull-down circuit prevents false triggering during startup. With a clear power indicator and secure mounting design, this 5V Relay Module delivers safe, stable, and long-lasting performance for home automation, industrial control, and DIY electronics projects. Features: A single-channel relay module with SPDT setup Supports up to 10A at 250 VAC for high-current applications. High-level trigger for dependable control. Compatible with a wide range of microcontrollers, including Arduino, AVR, PIC, and ARM. Isolated inputs to protect sensitive control circuitry. Contains a pull-down circuit to avoid inadvertent activation. Power supply indicator for rapid status checks. complies with international safety standards Convenient installation with four mounting holes.

SmartElex Sound Detection Sensor The SmartElex Sound Detection Sensor is a compact and efficient sound sensor module designed to detect sound presence and measure sound intensity with precision. Built around the LM386 audio amplifier, it provides both analog (AOUT) and digital (DOUT) outputs, making it suitable for a wide range of applications—from simple sound-triggered actions to detailed audio level monitoring. Operating smoothly between 3.3V and 5.3V, this sound sensor Arduino compatible module integrates easily with popular development boards such as Arduino, STM32, and Raspberry Pi. Its low power consumption, small form factor, and included 4-pin cable make it perfect for sound-activated projects, noise detection systems, smart devices, and interactive electronics where reliable audio sensing is required. Features: LM386 audio amplifier for a powerful sound signal enhancement. Detect low-level sounds with 200× amplification. Wide voltage range: 3.3 to 5.3 volts Dual outputs: analog (AOUT) and digital (DOUT). Low power consumption, suitable for embedded systems. Adjustable gain using external components Compact and lightweight; breadboard-friendly. Simple integration with Arduino, STM32, and more.

SmartElex BS612 PIR Motion Sensor Module The SmartElex BS612 PIR Motion Sensor Module is a passive infrared motion detection solution designed to sense human movement by detecting changes in infrared radiation. It helps automate electronic systems by enabling actions only when motion is detected, improving efficiency and reducing unnecessary power usage. This module is suitable for students, makers, engineers, educators, and startups who need a reliable motion sensing component for learning projects, prototypes, and embedded system designs. This PIR motion sensor module is commonly used in robotics, IoT devices, security systems, and home or industrial automation projects where accurate motion detection is required. It can be easily interfaced with popular platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick integration into working systems. The wide detection coverage and stable performance make it ideal for applications like motion-activated lighting, alarm systems, smart monitoring solutions, and interactive electronics projects. Features: Passive infrared (PIR) sensor for accurate human motion detection Detects movement by sensing changes in infrared radiation Wide 120° detection angle for broader area coverage Long sensing range suitable for security and automation use Low power consumption for battery-operated projects Compatible with Arduino, Raspberry Pi, ESP32, and similar microcontrollers