SmartElex 30S Single Channel 30A DC Motor Driver

ULN2003 12V Stepper Motor Driver This 12V DC 28BYJ-48 Stepper Motor is a low-cost, high-quality geared stepper motor. Because of the system's stability and reliability, the 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a popular combination of stepper motor and stepper driver. The pack includes the ULN2003 Stepper Motor Driver, which is a Mini Stepper Motor Driver. The main function of the ULN2003 is to amplify the control signals from the Arduino so that they can be used to drive the 28BYJ-48 Stepper Motor. If you want to control the stepper motor with the stepper motor driver, for that you will need a few essential components like Arduino jumper wires batteries or power supply Features: Stepper motor with a standard interface, when used directly pluggable. A, B, C, D four-phase LED indicator which indicates the status of the stepper motor work. Compact-size stepper motor perfect for small robotics applications. Also, read our blog What is Motor Driver detailing an overview of motor drivers, including the different types available and how they work.

Female to Female Jumper Wires (20cm) 40pcs These are 20cm 40pcs Female to Female Jumper wires, very Flexible and easily detachable. These jumper cables have 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly Dupont cables are useful with Orange Pi, Banana Pi, Raspberry Pi , Arduino , and other mini PCs and development boards . It is very useful in the PCB project, PC motherboard, as well as Breadboard connections. Additionally, these jumper wires allows you to plug and unplug easily for prototyping and can be used over and over again. Check out the best selection of Jumper Wires . Applications: Raspberry Pi Arduino PCB projects Breadboard connections Get a complete set of M2M, M2F, F2F Jumper Wires Set for DIY projects.

A3967 Stepper Motor Driver This A3967 Stepper Motor Driver For Arduino is the most recent version of EasyDriver v44, which was created in collaboration with Brian Schmalz. When compared to previous versions, it offers more flexibility and control over your stepper motor . It is a simple stepper motor driver that is compatible with most microcontrollers and capable of producing a digital 0 to 5V pulse (0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). A 7V to 30V power supply is required for the module's motor. The digital interface is powered by an onboard voltage regulator that can be set to 5V or 3.3V. The A3967 is a full-featured microstepping motor driver with an integrated transistor. It is intended for use with bipolar stepper motors in full-, half-, quarter-, and eighth-step modes, with output drive capabilities of 30 V and 750 mA. The A3967 comes with a fixed off-time current regulator that can operate in slow, fast, or mixed current-decay modes. This current-decay control scheme produces less audible motor noise, higher step accuracy, and lower power dissipation. The transistor is essential to the A3967's simple implementation. Simply sending one pulse to the STEP input causes the motor to move one step (full, half, quarter, or eighth depending on two logic inputs). It is not necessary to programme phase-sequence tables, high-frequency control lines, or complex interfaces. The A3967 interface is ideal for applications where a complex P is either unavailable or overburdened. Features: A3967 microstepping driver Adjustable current control from 150mA/phase to 750mA/phase MS1 and MS2 pins are broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth) Compatible with 4, 6, and 8-wire stepper motors of any voltage Breadboard-compatible pins.

CNC Shield for Arduino The CNC shield for Arduino has total four slots, can drive 4 A4988 stepper motors. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. The CNC Shield V3.0 allows you to build a engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. There are 4 slots on the board for plugging in stepper motor drive module which can drive 1 stepper motor each. Controlling each step stepper motor requires only two IO pins on the Arduino. Just insert this Arduino CNC Shield V3.0 onto an Arduino UNO , and install the GRBL firmware, you can then quickly build a DIY CNC engraving machine. This arduino shield is very convenient to use and is suitable for development boards compatible with Arduino. This CNC shield compatible with Arduino is the latest version of the CN shield model (V 3.0). The CNC Shield is GRBL 0.9 compatible and with the help of jumper wires , it is accessible to stepper drivers. Features: Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)

CNC Shield + UNO R3 Board compatible with Arduino + 4xDRV8825 Driver Kit Arduino Uno is an open-source microcontroller used by students and hobbyists entering the world of DIY electronics and automation, The Arduino Uno can be used for any application including being the brains of your next DIY 3D printer and/or CNC router The CNC Shield V3.0 allows you to build an engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. Along with that, the CNC shield allows you to control up to four stepper motors by mounting on 4 stepper motor drivers, included with this kit The DRV8825 provides an integrated motor driver solution for printers, scanners, and other automated equipment. The device has two H-bridge and is intended to drive a bipolar stepper motor. Features: UNO R3 Board: The main microcontroller board compatible with Arduino. CNC Shield: An expansion board that allows for easy connection and control of stepper motors. 4x DRV8825 Stepper Motor Drivers: High-performance drivers for controlling stepper motors. Micro-Stepping: Supports micro-stepping settings for precise control of stepper motors. GRBL Compatibility: Compatible with GRBL firmware, which is widely used for CNC control. Voltage Range: Operates on 12-36V DC. Heat Sinks: Included for cooling the stepper motor drivers. USB Cable: For connecting the UNO R3 board to a computer. 40-Pin Row Needles: For additional connections. Applications: CNC Machines: Used for controlling stepper motors in CNC milling, engraving, and cutting machines. 3D Printers: Essential for driving stepper motors in 3D printers, ensuring precise layer deposition and movement. Laser Cutters: Controls stepper motors in laser cutting machines for accurate cutting and engraving. Robotics: Ideal for robotics projects requiring precise motor control, such as robotic arms and automated guided vehicles (AGVs). X-Y Tables: Used in X-Y tables for accurate positioning and movement in various industrial applications. Pick-and-Place Devices: Employed in pick-and-place machines for accurate component placement in electronics manufacturing. Labeling Machines: Used in labeling machines for precise label application. Pinout Diagram for the Arduino Uno Microcontroller Applications of the Kit The kit can be used to create custom 3D printers, scanner, CNC mills and other automated equipment applications

SmartElex Micro ISM330DHCX 6DoF IMU Sensor The SmartElex Micro ISM330DHCX 6DoF IMU Sensor is a compact motion-sensing module that combines an accelerometer and gyroscope to measure movement, orientation, and rotation. It helps users track motion data accurately in three-dimensional space, making it useful for students, hobbyists, engineers, and educators working on robotics, automation, and motion-based electronics. This IMU breakout board simplifies motion tracking in projects where stability, responsiveness, and precision are important, without requiring complex circuit design or calibration setups. This 6DoF IMU sensor is commonly used in self-balancing robots, gesture-controlled systems, IoT wearables, drones, and embedded automation projects that rely on movement or orientation feedback. It integrates smoothly with popular development platforms like Arduino, Raspberry Pi, and ESP32, making setup and data processing beginner-friendly and efficient. With dependable performance and straightforward compatibility, the SmartElex Micro ISM330DHCX is a practical choice for prototyping, academic learning, and product development where reliable motion tracking and sensor fusion are essential. Features: 6DoF IMU with built-in accelerometer and gyroscope for motion tracking Measures linear acceleration and rotational movement in real time Compact breakout board designed for easy integration in projects Compatible with Arduino, Raspberry Pi, ESP32, and similar platforms Ideal for robotics, drones, wearables, and gesture-based control systems Reliable module for prototyping, STEM learning, and embedded development

SmartElex USB-C Serial Basic Converter and CH340C IC Breakout Module he SmartElex USB-C Serial Basic Converter with CH340C is a compact USB-to-serial adapter designed to help users program, debug, and communicate with microcontroller boards and embedded systems. It converts USB signals to reliable UART serial communication, making it useful for students, hobbyists, engineers, educators, and startups working with boards that lack native USB support. With its USB-C interface and CH340C chipset, it provides a simple plug-and-play experience for connecting development boards, sensors, and custom circuits to a computer. This USB-to-serial converter is ideal for prototyping in robotics, IoT development, firmware flashing, serial monitoring, and automation projects. It works smoothly with platforms like Arduino, ESP8266, ESP32, Raspberry Pi (UART pins), and other TTL-based microcontrollers, making integration straightforward in both development and testing stages. Offering stable communication and easy computer connectivity, the SmartElex USB-C Serial Basic Converter with CH340C is a practical tool for labs, DIY electronics, and professional development environments. Features: Converts USB-C to TTL serial for programming and debugging CH340C chipset ensures stable and reliable UART communication Plug-and-play design for quick connection to development boards Compatible with Arduino, ESP8266, ESP32, Raspberry Pi (UART), and more Ideal for firmware flashing, serial monitoring, and IoT prototyping Compact breakout module for labs, workshops, and field testing

7Semi 3Phase TMC6300 BLDC PMSM Brushless Motor Driver Breakout The 7Semi 3Phase TMC6300 BLDC PMSM Brushless Motor Driver Breakout is a compact, efficient brushless motor driver built for controlling 3-phase brushless motors with ease. It integrates the TMC6300 IC to simplify motor driving, reduce external components, and enable smooth, reliable operation. Designed for practicality and reliability, the board offers easy microcontroller compatibility, stable performance, and built-in protections for safe use. It is well suited for students, hobbyists, and professionals working on robotics, automation, drones, and motor-driven DIY applications. Features: Powered by the TMC6300 motor driver IC with high-side and low-side MOSFET control for each phase Supports 6-PWM input signals for precise and complete motor control Diagnostic output for easy detection of system faults Wide 2–11V operating voltage, ideal for low-power applications Breadboard-compatible design with optimized header alignment Built-in thermal and short-circuit protection for safe operation Breakout Board Pinouts – TMC6300 Motor Driver IC Power & Control Inputs VM / GND – Motor power supply (2–11V) VIO – I/O logic level supply / standby control PWM Control Inputs (High-side & Low-side MOSFETs) UH / UL – Phase U PWM inputs VH / VL – Phase V PWM inputs WH / WL – Phase W PWM inputs Outputs SENSE – Current sense output DIAG – Diagnostic and fault indication output U / V / W – Motor phase outputs from the three half-bridges

SmartElex 5S 6V-30V DC Motor Driver The SmartElex 5S 6V–30V DC Motor Driver is a robust and efficient DC motor driver built specifically for brushed DC motors, combining simplicity with high power performance. Operating on a wide input voltage range of 6V to 30V DC, it supports 5S battery configurations, making it ideal for robotics, automation, and DIY mechatronics systems. This brushed DC motor driver is easy to interface with microcontrollers, allowing smooth motor speed and direction control with minimal setup. Designed for reliability and versatility, it serves as a dependable high-power DC motor driver for applications that demand stable and efficient motor operation. Features: The motor can operate at voltages ranging from 6 to 30 V. Without a heat sink, the maximum current is 5A, with a peak current of 10A for 10 seconds. One brushed DC motor with bidirectional control. Current limiting at 5 amps. Overvoltage lockout. PWM frequency is up to 32 kHz. Supports TTL PWM from the microcontroller. Internal thermal shutdown. Undervoltage lockout. Drive four externally powered NMOS transistors using PWM and direction control. 3.3V and 5V logic level inputs

SmartElex Multiplexer USB/TTL/RS232/RS485 Communication Converter The SmartElex Multiplexer USB/TTL/RS232/RS485 Communication Converter is a versatile interface board designed to simplify data communication between different serial protocols. It allows users to convert and connect USB signals to TTL, RS232, or RS485 devices without complex wiring or additional hardware, making it ideal for students, makers, engineers, educators, and startups working with industrial equipment, microcontrollers, or legacy communication systems. This module helps bridge communication gaps between computers and embedded hardware, reducing setup time during development and troubleshooting. This multiplexer converter is commonly used in robotics, IoT device management, automation systems, PLC communication, sensor networks, and serial debugging tasks. It works smoothly with Arduino, Raspberry Pi, ESP32, and other microcontroller platforms, enabling stable data exchange and reliable serial protocol conversion for both prototypes and field applications. With easy integration and dependable performance, the SmartElex USB/TTL/RS232/RS485 converter is a practical tool for laboratories, development environments, and industrial interfacing projects that require seamless multi-protocol communication. Features: Supports USB to TTL, RS232, and RS485 serial communication Enables multiple protocol conversions in a single module Simplifies interfacing between computers and embedded systems Compatible with Arduino, Raspberry Pi, ESP32, PLCs, and sensors Ideal for robotics, IoT, automation, and industrial applications Suitable for debugging, monitoring, and data communication testing

7Semi ENS160 Air Quality Sensor I2C Probe (ES-12183) The 7Semi ENS160 Air Quality Sensor I2C Probe (ES-12183) is a compact and ready-to-use air quality sensing module built to measure indoor environmental conditions. It uses the advanced ENS160 multi-gas sensor to detect volatile organic compounds (VOCs) and other indoor pollutants, helping you understand the quality of the air around you. The probe provides clean, processed digital outputs that make monitoring easy. This sensor communicates over a standard I2C interface and works at 3.3 V, making it simple to connect to popular controllers like Arduino, ESP32, or Raspberry Pi. With features like long-term stability, low power use, and reliable performance across a range of temperatures and humidity levels, it’s a great choice for smart home systems, air purifiers, HVAC monitoring, and other environmental projects. Features: Advanced ENS160 multi-gas sensor for indoor air quality monitoring Detects VOCs and air quality levels for healthier environments I2C digital interface for simple integration with microcontrollers Factory-calibrated sensor for reliable and consistent readings Low power consumption, suitable for continuous monitoring Compatible with Arduino, ESP32, Raspberry Pi, and IoT systems 7Semi I2C Wire Color Code

SmartElex BX404 Digital PIR Motion Sensor The SmartElex BX404 PIR Motion Sensor is a compact and reliable BX404 PIR Motion Sensor designed to detect human movement using passive infrared technology. It helps users sense motion accurately by detecting changes in body heat, making it useful for security, automation, and energy-saving applications. This passive infrared sensor is ideal for students, makers, educators, engineers, and startups looking to add motion detection to their electronic projects in a simple and effective way. The sensor works smoothly with popular platforms such as Arduino, Raspberry Pi, and ESP32, allowing easy integration into robotics, IoT devices, and automation systems. Its stable digital output makes it suitable for applications like smart lighting, intrusion alarms, occupancy detection, and DIY prototypes. With easy interfacing and dependable performance, this sensor enables quick development of motion-based solutions for real-world electronics projects. Features: Accurate motion detection using passive infrared sensing Designed for reliable human movement detection Digital output for easy interfacing with controllers Compatible with Arduino, Raspberry Pi, and ESP32 Low power operation for continuous monitoring Ideal for security, automation, and smart electronics projects

SmartElex Atmospheric Sensor Breakout – BME280 Temperature, Humidity & Pressure Sensor Module The SmartElex Atmospheric Sensor Breakout is a compact and reliable module designed to measure temperature, humidity, and air pressure with high accuracy. Built around the powerful BME280 sensor, this 3-in-1 sensor module makes it easy to monitor environmental conditions in real time. Perfect for weather stations, IoT systems, and smart home devices, this environmental sensor breakout delivers precise readings while consuming very little power. It supports both I2C and SPI communication interfaces, making it simple to connect with popular boards like Arduino, ESP32, or Raspberry Pi. Whether you’re building an automation project or a DIY weather monitor, this temperature, humidity, and pressure sensor breakout provides reliable performance and easy integration. It’s a great choice for makers, students, and developers who want accurate environmental data in a small and efficient module. Features: 3-in-1 Environmental Sensor: Accurately measures temperature, humidity, and barometric pressure using the BME280 sensor. High Precision Readings: Provides stable and accurate data for weather monitoring and environmental analysis. I2C & SPI Compatible: This I2C SPI environmental sensor module easily interfaces with Arduino, ESP32, Raspberry Pi, and other microcontrollers. Compact Design: Small and lightweight, making it perfect for embedded systems, IoT devices, and portable applications. Low Power Consumption: Efficient sensor design ensures reliable long-term use in battery-powered projects. Easy to Integrate: Ideal for beginners and professionals working on DIY weather stations, home automation, or environmental monitoring systems.

Cytron Maker Reflect IR Reflectance Sensor for Beginner The Cytron Maker Reflect IR Reflectance Sensor is a compact and beginner-friendly module designed to help learners understand how infrared reflectance works in robotics and automation. Using an IR LED and a high-sensitivity phototransistor, it measures how much IR light bounces back from a surface and generates an analog voltage that’s easy for any microcontroller to read. This makes it perfect for exploring concepts like surface detection, black-and-white line following, and reflectivity measurement. Designed by Cytron with simplicity in mind, this sensor is ideal for kids, students, and makers stepping into DIY robotics projects. Its ultra-small size and centered mounting hole allow it to fit even in tight robot designs, while its 3.3V and 5V compatibility ensures smooth use with Arduino, Raspberry Pi, and all common controllers. Whether you're building a line follower, Sumo bot, maze robot, or encoder-based mechanism, the Maker Reflect delivers reliable IR performance with minimal setup. Features: Works as a hands-on IR reflectance sensor that uses an IR LED + phototransistor to measure surface reflectivity for reliable detection. Helps beginners learn analog sensing, line detection, object presence, and robot navigation, building strong STEM fundamentals. Built with safe, durable Cytron components, ensuring stable performance even in beginner-level DIY robotics projects. Fully compatible with 3.3V and 5V systems, making it easy to interface with Arduino, Raspberry Pi, microcontrollers, and robotics platforms. Offers a sensing distance of 1mm to 40mm at 5V (ideal for black/white surface detection and line following). Provides analog voltage output, allowing smooth interpretation of different surface colors and reflectivity. Compact size of 18.1mm × 8.4mm × 4.2mm, with a centered mounting hole for accurate positioning at the front of robots. Suitable for school projects, robotics clubs, and maker experiments - perfect for line followers, Sumo robots, maze solvers, and encoder wheels. Makes a great STEM learning gift for young robotics enthusiasts and beginners exploring IR sensors.

SmartElex Single Cell MPPT Solar Charger for LiPo Battery SmartElex Single Cell MPPT Solar Charger for LiPo Battery is designed to efficiently charge a single-cell LiPo battery using solar panels by extracting maximum power under varying sunlight conditions. This MPPT solar charger uses Maximum Power Point Tracking to optimize solar energy harvesting, making it a practical choice for students, hobbyists, engineers, educators, and startups working on renewable energy systems or off-grid electronics. It helps solve the common issue of inconsistent solar charging by maintaining stable charging performance even when light levels fluctuate. This solar LiPo charger module integrates easily with microcontroller platforms like Arduino, Raspberry Pi, and ESP32, making it suitable for IoT devices, autonomous sensor nodes, outdoor robots, and portable energy projects. It is ideal for prototyping solar-powered systems, automation setups, and remote monitoring applications where reliable charging is essential. With its compact size and stable charging algorithm, it provides a dependable foundation for building energy-efficient and self-sustaining electronics powered directly by the sun. Features: MPPT charging algorithm for maximum solar energy utilization Designed for charging single-cell LiPo batteries from solar panels Maintains stable charging even with fluctuating sunlight Ideal for off-grid and renewable energy-based electronics Compatible with Arduino, Raspberry Pi, ESP32, and IoT devices Compact module for portable, outdoor, and self-sustaining projects