reComputer Industrial J3011- Fanless Edge AI Device with Jetson Orinâ„¢ Nano 8GB 40TOPS

SmartElex PAM8403 5V Two-Channel Stereo Mini Class-D Audio Amplifier The SmartElex PAM8403 5V Two-Channel Stereo Mini Class-D Audio Amplifier is a compact audio amplification module designed to deliver clear and efficient stereo sound from low-power audio sources. It solves the need for adding audio output to small electronic projects without bulky components or complex circuits. This module is suitable for students, makers, engineers, educators, and startups who want an easy way to integrate stereo audio into DIY electronics, learning kits, and embedded system prototypes. This stereo mini Class-D audio amplifier is commonly used in robotics, IoT devices, automation systems, and portable electronics that require lightweight and power-efficient audio output. It can be easily interfaced with platforms such as Arduino, Raspberry Pi, and ESP32 to drive small speakers in projects like voice alerts, sound feedback systems, and interactive devices. The simple design and stable performance make it easy to integrate into both prototype builds and finished products, enabling reliable audio output with minimal setup effort. Features: Two-channel stereo Class-D audio amplifier for clear sound output Operates on a 5V power supply, ideal for embedded projects High efficiency design with low heat generation Compact size suitable for space-constrained applications Drives small speakers for stereo audio output Compatible with Arduino, Raspberry Pi, ESP32, and other audio-enabled projects

7Semi PCA9306 I2C Bidirectional Voltage Level Translator Breakout Board The 7Semi PCA9306 I2C Bidirectional Voltage Level Translator Breakout Board is a compact and efficient PCA9306 voltage level translator designed to safely interface I2C and SMBus devices operating at different logic levels. Supporting voltage translation from 1.2V to 5.0V, this board enables seamless communication between low-voltage sensors and higher-voltage microcontrollers without manual direction control. As a dependable I2C logic level converter, it delivers minimal signal delay and stable bidirectional data flow, making it ideal for robotics, industrial controllers, embedded systems, and DIY electronics projects requiring precise mixed-voltage I2C communication. Allowable Voltage Level Translation The breakout can transfer voltages ranging from 3.3V to 5V. VREF1 (Low Side) VREF2 (High Side) 1.2V 1.8V, 2.5V, 3.3V, 5V 1.8V 2.5V, 3.3V, 5V 2.5V 3.3V, 5V 3.3V 5V Features: Wide Voltage Range Support: Operates between 1.2V and 5.0V, accommodating a wide range of components. Dual Bidirectional Channels: Translates both the SDA and SCL lines for complete I2C compatibility. I2C and SMBus Protocol Support: Fully compatible with regular and fast-mode I2C devices, as well as SMBus peripherals. No Direction Pins Required: Signal direction is automatically detected for easier design. Low propagation delay: A delay of less than 1.5ns maintains data integrity at high speeds. 5V Tolerant I/O Ports: Securely links 5V signals to lower voltage devices. Compact and simple to use: ideal for embedded applications, prototyping, and compact systems.

7Semi BME688 Environmental Sensor Probe with Gas, Pressure, Temperature & Humidity Sensor The 7Semi BME688 Environmental Sensor Probe is a compact, AI-enabled environmental monitoring solution designed for precise measurements of temperature, humidity, barometric pressure, and gas levels. Built using the advanced Bosch BME688 sensor, it provides highly accurate, real-time environmental data that supports air quality monitoring, research applications, industrial automation, and smart home systems. Housed in a durable plastic shell, the probe ensures long-term stability while maintaining excellent breathability necessary for accurate gas sensing. This versatile environmental probe uses an I2C digital interface for easy integration with microcontrollers and embedded systems, making it suitable for both portable and fixed installations. With a wide operating range and low power consumption, it delivers stable performance even in harsh or fluctuating environments. AI-powered gas sensing adds advanced analytical capabilities such as IAQ scoring, VOC detection, CO₂-equivalent estimation, and bVOC outputs, making this probe a powerful tool for environmental diagnostics and air-quality-driven automation. Features: Provides simultaneous measurement of temperature, humidity, pressure, and gas concentration, enabling complete environmental assessment in a single compact device. AI-powered gas sensing detects VOCs, CO₂-equivalents, and various gases at ppb-level sensitivity for accurate indoor air quality monitoring. Durable plastic enclosure offers strong resistance to corrosion, dust, and temperature variations while maintaining high permeability for reliable sensing. Wide operational range ensures dependable performance from -40 to 85°C and 0–100% RH, suitable for both indoor and outdoor monitoring environments. Low power design supports battery-operated systems, making it ideal for portable, energy-efficient projects. Mini Round Shell (MRS) connector with a 1m cable provides secure and professional-grade installation flexibility. I2C digital communication interface simplifies integration with embedded systems and common microcontrollers. NIST-traceable factory calibration guarantees accuracy for industrial, regulatory, and research applications. Delivers advanced analytical outputs including IAQ, bVOC, CO₂-equivalent, gas intensity, gas scan, and air quality indexes. Humidity Sensors Pins: Digital Humidity and Temperature Sensor Probe I2C Interfacing with MCU:

Bambu Lab H2D Pro EU 3D Printer with AMS 2 Pro and AMS HT The Bambu Lab H2D Pro EU 3D Printer with AMS 2 Pro and AMS HT is a professional multicolor FDM printing system built for high-performance manufacturing and advanced prototyping. It operates on 220–240 VAC, 50/60 Hz power input, making it suitable for European electrical standards and continuous industrial use. The printer features a 0.4 mm nozzle capable of reaching temperatures up to 350 °C, supports 1.75 mm filament, and uses hardened steel gears for long-term durability and consistent extrusion. Integrated with the AMS 2 Pro and AMS HT systems, it enables fully automatic filament switching, moisture-controlled storage, and intelligent material handling for complex multicolor and multi-material prints. The CoreXY motion architecture ensures high-speed, accurate movement, while smart auto calibration and real-time monitoring simplify setup and operation. With its enclosed design and professional-grade build quality, this system is ideal for product development, engineering applications, educational labs, and production environments where reliability, speed, and multicolor capability are critical. Stable Ethernet Connection, WPA2-Enterprise Authentication Wi-Fi Connection Strong network communication in challenging situations is ensured by the H2D Pro's newly integrated Ethernet port, which allows you to connect to your devices. Crowded wireless signal situations can also make use of Ethernet connectivity. In order to meet strict network security needs, the H2D Pro also has individual physical kill switches for Wi-Fi and WPA2-Enterprise Wi-Fi Authentication (EAP-PEAP/EAP-TLS/EAP-TTLS). Tailor Solution for Printer Management Bambu Lab provides businesses with expert assistance to create effective printer fleet management solutions that meet specific integration requirements. To help clients achieve customized functionalities, their skilled software R&D team offers comprehensive technical support. Flexible and Rigid, low Cost and Exotic Materials in One Print Create remarkable interlocking structures and inventive designs that go beyond conventional manufacturing by combining flexible and rigid materials in a single print. By utilizing premium materials only when required, combining high-performance materials with common ones further lowers costs and increases material efficiency. Advanced Multi-Color and Support Printing Supported printing is no longer a hassle. One nozzle can be set aside for specific support material using H2D's dual-nozzle arrangement, enabling secure printing and an ideal support interface. In multi-color prints, dual-nozzle printing minimizes purge cycles. In order to conserve time and materials, H2D's clever algorithms maximize dual-nozzle efficiency by optimizing filament utilization. Enhanced Print Reliability and Thermal Performance The H2D Pro optimizes chamber temperature via adaptive air circulation and a 65°C active heater. Active flaps manage airflow based on filament type to improve bonding and prevent warping or clogs. A high-performance fan in the toolhead front cover cools the extruder and heatsink, raising the operating threshold by 3°C to minimize jamming in difficult conditions. HRA 90 Tougher Nozzle, Lower Maintenance The tungsten carbide nozzle of the H2D Pro has remarkable wear resistance, with HRA 90 as opposed to hardened steel's 74. When printing abrasive, high-performance fiber-reinforced filaments, this leads to a 50% improvement in longevity. Effectively Filter Particulates and VOCs Generated by 3D Printing We've included a premium coconut shell activated carbon filter, an H12 HEPA filter, and a G3 pre-filter for the best possible air filtration. This improved method successfully reduces strong smells and particles, which is especially helpful when printing in areas with poor ventilation. Features: The printer supports high-temperature dual nozzle printing up to 350°C (662°F) to accommodate industrial-grade materials. An auxiliary extruder cooling fan is integrated to maintain precise temperature control during the extrusion process. The tungsten carbide super durable nozzle provides exceptional wear resistance for long-term use with abrasive filaments. An active chamber heating system reaches 65°C (149°F) to ensure optimal environment stability and reduce warping. The system achieves a 50um motion accuracy to deliver high-precision prints with fine detail. Users can utilize a stable Ethernet connection for reliable network communication in professional environments. A physical network killswitch is included to provide an immediate and secure way to disconnect the device from the network. Support for WPA2-Enterprise Wi-Fi Authentication ensures the printer meets strict corporate security protocols. Clean air is maintained through an adaptive air circulation system paired with high-efficiency HEPA filtering.

Bambu Lab H2C Combo 3D Printer The Bambu Lab H2C Combo 3D Printer redefines high-performance multi-material 3D printing with precision, speed, and intelligence. Built on advanced Fused Deposition Modeling technology, it features a robust aluminum-steel chassis, fully enclosed chamber, and hardened steel extrusion system capable of handling demanding engineering materials. With support for printing up to seven materials in a single job—without purge waste—the H2C enables complex, integrated designs effortlessly. Its AI-driven monitoring, ultra-fine 50 µm motion accuracy, and automatic calibration ensure consistent, professional-grade results, making it ideal for industrial prototyping, advanced R&D, and professional manufacturing workflows. Purge Saving Multi-Material Printing Using the H2C, it is possible to print as many as seven distinct materials in one pass without needing to purge any nozzles. Merge various material characteristics into a single continuous form and elevate integrated design to an unprecedented level. Integrated TPU Joints for Multi-Color Parts Print durable TPU ball joints for your robot models flexible long-lasting and built for endless motion. Multi-Material Printing With Minimal Purge Waste In conventional single-nozzle multi-material printing, it is necessary to flush out any remnant material when switching filaments. Vortek revolutionizes this process by utilizing a smart hotend-swapping mechanism that substitutes the complete hotend, resulting in quicker, cleaner prints with reduced waste. Fully Automatic Filament Change and Always Delivering the Most Efficient Conversation The Vortek system integrates flawlessly with our dependable AMS (Automatic Material System), enabling the complete automation of the filament replacement procedure, eliminating the necessity for manual loading of each filament into the toolhead. Small Form Factor, More Filaments As only the hotend is exchanged, the setup can accommodate as many as six hotends which are not changeable without greatly decreasing the build capacity. This allows for an increased variety of materials, colors, and options, all within a single print. 8-Second Induction Heating and Contactless Design for Reliability Our top tier induction heating technology heats the nozzle within 8 seconds, greatly minimizing the preheating duration required for changing materials when compared to conventional techniques. Our strict criteria for dependability prompted us to shift from using metal pins that rely on contact, as they are susceptible to oxidation and inconsistent connections. We created a solution without physical contact that guarantees a consistent, high-frequency link, which is essential for accurate temperature management and synchronized intelligent hotend operation. Enclosed for High Performance Printing and Fully Automatic Nozzle Offset Calibration Featuring a continuous enclosure and a flexible air circulation system, the H2C ensures a consistent environment temperature for top quality materials while also purifying the air to create a tidy and secure workspace. Our calibration process for inductive nozzle offset is entirely automated, requiring no manual intervention, calibration plates, or additional setup. Within a matter of minutes, the H2C accurately adjusts the nozzle offset to a tolerance of 25 microns. Dedicated Hotends for Specific Filaments The Vortek system of the H2C allows you to assign one of its six swappable hotends to particular filaments, significantly transforming the use of important engineering substances. This guarantees enhanced reliability and uniformity in printed results. Additionally, each hotend can automatically remember filament data, allowing for an immediate pairing with the appropriate hotend when that same material is loaded again. Smooth Surface, Sharp Edges The H2C utilizes the servo motor within the extruder along with high-resolution eddy current sensors positioned at the nozzle to detect the dynamics of extrusion. This capability allows for accurate control of the extrusion process and the automatic adjustment of Pressure Advance (PA) settings for every filament, leading to smoother surfaces and more defined, sharper edges. Flexible Network Security & Connectivity The H2C provides easy access to cloud connections for controlling the device remotely from any gadget. For applications that require high security, it also offers comprehensive offline capabilities, guaranteeing total physical separation. Users can manage the printer, transfer files, and perform firmware updates without requiring internet access. For those with advanced skills, Developer Mode allows access to the MQTT port, enabling the integration of external components and software. Features: The H2C supports multi material printing for up to 7 different materials, allowing you to produce complex parts in a single run while completely eliminating the need for nozzle purging or creating material waste. The system is equipped with dual hardened steel nozzles capable of reaching 350 °C, which are specifically engineered for long term durability and the processing of high temperature engineering filaments. It features a fully enclosed heated chamber that maintains a steady 65 °C environment to effectively minimize warping and significantly improve layer adhesion for high performance materials. The high force PMSM servo extruder provides up to 10 kg of pushing power, delivering stable and high speed extrusion with 70% more force than traditional stepper motors. By utilizing a vision encoder that automatically compensates for mechanical drift, the printer achieves an ultra precise motion accuracy of 50 µm throughout the entire build. The AI powered print monitoring system uses a network of 59 intelligent sensors and a quad camera vision setup to detect potential printing errors in real time. The H2C features automatic nozzle offset and pressure advance calibration to ensure perfectly smooth surface finishes and consistently sharp edges on every part.

7Semi ESP32-DEVKIT-E – ESP32 WiFi BLE Development Board with CP2102 USB-UART The 7Semi ESP32-DEVKIT-E is a compact and powerful development board built around the ESP32-WROOM-32E module, offering dual-core processing, onboard WiFi, and Bluetooth connectivity. Designed for makers, students, and IoT developers, it provides reliable wireless performance and plenty of GPIO pins to interface with sensors, displays, motors, and more. Whether you're experimenting with automation, creating smart devices, or building connected prototypes, this board gives you the flexibility and power needed to push your ideas further. With a CP2102 USB-to-UART bridge for easy programming, breadboard-friendly spacing, and multiple power input options (USB, 5V, or 3.3V), the ESP32-DEVKIT-E is built for smooth prototyping. It delivers a stable development experience with 4MB Flash, a PCB antenna, and support for protocols like SPI, I2C, I2S, ADC, DAC, and PWM - making it ideal for IoT, robotics, wearables, smart home projects, and low-power connected applications. Features: Powered by the ESP32-WROOM-32E module featuring a dual-core processor running at 160MHz for fast and efficient performance. Integrated WiFi and Bluetooth support enables seamless wireless connectivity for IoT and smart device applications. Includes multiple GPIO pins that allow easy interfacing with sensors, displays, motors, and other electronic components. Breadboard-friendly pin layout ensures easy prototyping and smooth development workflows. Equipped with a CP2102 USB-UART bridge for convenient programming and debugging via USB. Flexible power options including Micro USB, 5V, and 3.3V inputs to suit a wide variety of project needs. Built-in PCB antenna, 4MB flash memory, and compact, cost-effective design ideal for beginners and advanced developers alike. ESP32 Devkit Pinout Diagram:

7Semi MCP4728 Quad DAC Module The 7Semi MCP4728 Quad DAC Module is a compact and reliable DAC module designed to convert digital signals into precise analog voltage outputs. Based on the MCP4728 IC, this digital-to-analog converter breakout board allows users to generate up to four independent analog outputs using simple I²C communication, making it an efficient solution for applications where microcontrollers lack sufficient analog output pins or require higher accuracy. This module offers easy integration with popular microcontrollers, stable performance, and flexible voltage output control, making it ideal for signal generation, sensor simulation, audio control, and calibration tasks. With its user-friendly design and dependable operation, it is well suited for students learning embedded systems, hobbyists building DIY electronics, and professionals developing prototypes or compact analog control systems. Features: Powered by the Microchip MCP4728 Quad DAC IC 12-bit resolution on all four DAC output channels (A–D) Onboard non-volatile EEPROM retains DAC settings after power-off I²C interface with Fast Mode support up to 400 kHz Low-power operation, ideal for battery-powered projects Compact 7Semi breakout with clearly labeled pinouts Supports LDAC and RDY pins for real-time DAC updates and monitoring Applications: Signal generation (sine, square, and triangle waveforms) Audio voltage control for synthesizers and mixers Programmable and adjustable reference voltage sources Lab instruments, testing, and control systems Industrial automation and process control applications Multi-channel analog and neural interface testing

SmartElex BS312 PIR Motion Sensor The SmartElex BS312 PIR Motion Sensor is a compact passive infrared sensor designed to detect human motion by sensing changes in infrared radiation. It helps systems respond only when movement is present, reducing unnecessary power usage and improving efficiency. This sensor is suitable for students, makers, engineers, educators, and startups who are building electronics projects that require reliable motion detection in a small, low-power form factor. This PIR motion sensor is ideal for robotics, IoT devices, security systems, and automation projects, especially those that run on batteries or need low standby power consumption. It can be easily interfaced with popular platforms such as Arduino, Raspberry Pi, and ESP32, making integration quick and straightforward. Common use cases include motion-activated lighting, smart alarms, occupancy detection, and compact IoT monitoring solutions where dependable performance and simple integration are essential. Features: Compact PIR sensor for accurate human motion detection Detects movement using passive infrared technology Low power consumption ideal for battery-powered projects Digital output for easy interfacing with microcontrollers Fast response time for real-time motion detection Compatible with Arduino, Raspberry Pi, ESP32, and similar boards

Witty Fox Hot Melt Glue Gun 60w with EU Plug Witty Fox Hot Melt Glue Gun 60W with EU Plug is a powerful and versatile adhesive tool designed to handle a variety of bonding tasks with ease. With 60 watts of power, it heats up quickly and melts glue sticks efficiently, providing a strong and steady flow of hot glue. This makes it perfect for heavier DIY projects, crafting, home repairs, and even light woodworking tasks. This glue gun features a standard EU plug, so you can easily connect it directly to household power outlets without needing extra adapters. Its ergonomic design offers a comfortable grip and good control, making it easy to apply glue precisely where you need it. Whether you’re fixing broken items, creating decorative pieces, or working on larger craft projects, the Witty Fox 60W Hot Melt Glue Gun delivers reliable performance and strong adhesive results in a ready-to-use package. Features: 60W high-power heating for fast melt and strong glue flow Standard EU plug for direct connection to mains power Quick heat-up suitable for continuous and heavy-duty use Compatible with standard hot melt glue sticks Comfortable ergonomic handle for better control and precision Ideal for DIY crafts, home repairs, woodworking, and workshop tasks

RadioLink SE100 M10 GPS Module with High Positional Accuracy for Drones & UAVs The SE100 M10 GPS Module with High Positional Accuracy is a precision navigation sensor designed to provide reliable and accurate positioning data for drones, UAVs, robotics, and other GPS-enabled applications. Featuring advanced satellite signal processing and a compact form factor, this module ensures strong signal reception, fast satellite lock times, and stable performance even in challenging environments. Ideal for both hobbyists and professional developers, the SE100 M10 offers seamless integration with flight controllers and navigation systems, helping improve flight stability, waypoint tracking, and autonomous operation. Whether you’re building a custom drone, upgrading navigation accuracy, or enhancing your robotics project, this GPS module delivers dependable performance for enhanced control and situational awareness. Features: High positional accuracy GPS module for drones, UAVs, and robotics applications Powered by advanced M10 GNSS technology for improved satellite tracking Fast satellite acquisition with stable and reliable signal reception Compact and lightweight design for easy integration with flight controllers Supports precise navigation, waypoint tracking, and autonomous flight modes Suitable for hobby, research, and professional UAV projects

SmartElex DS3232 RTC (Real Time Clock) Breakout Module The SmartElex DS3232 RTC Breakout Module is a reliable DS3232 RTC module designed for accurate and long-term timekeeping in electronics and IoT projects. With an integrated crystal oscillator and temperature-compensated circuitry, it maintains precise date and time even under changing environmental conditions. This real-time clock module supports I²C communication, making it simple to interface with popular microcontrollers for applications such as data logging, digital clocks, alarms, and automation systems. A coin cell battery backup keeps the clock running during power loss, while its low power consumption and stable performance make it ideal for projects that demand exact timing and consistent operation over years. Features: Integrated crystal for accurate timekeeping. Temperature correction to reduce drift. Compact design that works well with breadboards. Works with I²C interface for microcontroller integration. Includes a coin cell battery backup for uninterrupted operation. Fully constructed and tested module ready for speedy deployment. Compatible with Arduino, Raspberry Pi, and other platforms. Low power usage results in longer battery life.

7Semi SHT40 SGP40 VOC Environmental Monitoring Sensor Module Qwiic-Ready The 7Semi SHT40 + SGP40 VOC Environmental Monitoring Sensor Module is designed to help you measure temperature, humidity, and air quality with high accuracy and minimal effort. Built with advanced SHT40 and SGP40 sensing technology, this compact module delivers precise data for temperature (–40°C to 125°C), humidity (0–100% RH), and VOC levels with excellent response time and reliability. Whether you're prototyping with Arduino, Raspberry Pi, or any I2C-based microcontroller, the Qwiic-compatible interface makes integration incredibly simple and clean. This breakout board is ideal for home automation, indoor air-quality projects, workplace monitoring, or industrial systems where accurate VOC readings matter. Its low power consumption and digital 16-bit output make it highly suitable for long-term IoT deployments, high-precision environmental sensing projects, and portable air-quality monitors. Features: Designed as a compact breakout board integrating the SHT40 high-precision temperature and humidity sensor and the SGP40 VOC sensor for reliable environmental monitoring. Offers fast and accurate measurements, including ±0.2°C temperature accuracy and ±1.8% RH humidity accuracy, ensuring dependable readings in various environments. Qwiic-compatible interface enables effortless plug-and-play connectivity with I2C-enabled microcontrollers and SBCs without soldering. Produces 16-bit digital raw and processed VOC Index signals for easy integration into data-logging, automation, or IoT systems. Ensures low power consumption, making it suitable for battery-powered and continuous-monitoring applications. Built to detect a wide range of volatile organic compounds such as ethanol, acetone, and formaldehyde with high sensitivity and quick response times. Board Dimensions: Arduino I2C Connection Diagram:

7Semi SHT45 Humidity & Temperature Sensor Breakout Board with 4-Pin Connector Get reliable and highly precise environmental readings with the 7Semi SHT45 Humidity & Temperature Sensor Breakout, engineered for applications where accuracy truly matters. Built on Sensirion’s advanced SHT45 platform, this compact module delivers outstanding measurement performance with ±1.0% RH humidity accuracy and ±0.1°C temperature accuracy. Whether you're developing an HVAC controller, creating a weather-monitoring setup, or designing a smart agriculture system, this breakout ensures stable, real-time data you can trust. Designed with a 4-pin JST connector and I2C communication, the sensor integrates effortlessly into microcontroller projects using platforms such as Arduino, ESP32, or Raspberry Pi. The ultra-low power consumption and wide operating voltage range make it ideal for both portable and embedded IoT devices. Its fast response time and factory-calibrated output allow creators, engineers, and automation designers to build systems that depend on precise climate data without additional tuning. This makes it an excellent choice for environmental monitoring, industrial automation, and smart home development. Features: Provides exceptionally accurate measurements with ±1.0% RH humidity accuracy and ±0.1°C temperature accuracy for reliable environmental tracking. Covers a wide operating range of 0–100% RH and -40°C to 125°C, making it suitable for diverse climates and industrial environments. Delivers fast response times, ensuring timely humidity and temperature updates for real-time applications. Designed with ultra-low power CMOSens® technology, making it ideal for long-duration, battery-powered systems. Offers seamless integration through its I2C interface and 4-pin JST connector, enabling quick and secure connectivity with most MCUs. Operates efficiently across a supply voltage range of 1.08V to 3.6V, enhancing compatibility across different devices. Comes factory-calibrated with a certification, ensuring immediate plug-and-play accuracy without additional configuration.

7Semi Vikram-3015 High-Power 30V 15A Single-Channel DC Motor Driver Module The 7Semi Vikram-3015 is a powerful and reliable high-current motor driver designed to handle demanding brushed DC motor applications with ease. Built for makers, robotics engineers, and automation projects, it supports a wide operating voltage range of 6V to 30V and delivers a continuous 15A output without requiring a heat sink. Its fully NMOS H-Bridge architecture ensures excellent efficiency, making it ideal for high-load motor control setups that require consistency and stable performance. With support for 3.3V and 5V logic levels, the Vikram-3015 easily integrates with popular development platforms such as Arduino, Raspberry Pi, and PLC systems. The on-board test buttons, motor output LEDs, and robust protection circuitry, such as overcurrent, overheating, and undervoltage protection, simplify debugging and ensure long-term reliability. Whether you're building robotics systems, automation hardware, or DIY mechatronics, this motor driver provides a dependable foundation for high-torque motor control. Features: Provides smooth bidirectional control for single-channel brushed DC motors, enabling forward and reverse operation with high responsiveness. Operates efficiently across a wide 6V–30V voltage range while delivering a strong and stable 15A continuous current output. Supports both 3.3V and 5V logic inputs, ensuring seamless compatibility with microcontrollers and SBCs like Arduino and Raspberry Pi. Includes onboard testing features such as dedicated buttons and motor output LEDs for quick diagnostics and validation. Offers robust safety mechanisms including overcurrent protection, over-temperature shutdown, and undervoltage lockout for long-term durability. Uses a fully NMOS H-Bridge, improving efficiency and eliminating the need for bulky heat sinks.

7Semi OPT3004 Digital Ambient Light Sensor Breakout with I2C STEMMA QT / Qwiic The 7Semi OPT3004 Digital Ambient Light Sensor Breakout is a compact and high-precision module designed to measure visible light just the way the human eye perceives it. Built around the OPT3004 sensor, it delivers exceptional accuracy, wide dynamic range, and excellent infrared rejection, making it ideal for real-world lighting applications. With seamless I2C compatibility and Qwiic/STEMMA QT support, this breakout is easy to integrate into microcontroller or IoT setups without complicated wiring. Whether you're building smart lighting systems, automating energy-efficient environments, or experimenting with environmental monitoring projects, this module provides consistent and dependable lux readings. Its advanced design, low-power performance, and precise optical filtering make it a reliable choice for hobbyists, students, and professional developers looking for accurate ambient light sensing in their projects. Features: The breakout uses the OPT3004 sensor, which delivers precise visible light measurements with excellent IR rejection to mimic human eye response. It offers a wide measurement range from 0.01 lux to 83,000 lux, allowing accurate performance in dim to bright environments. The module includes automatic gain ranging with a 23-bit effective dynamic range, ensuring stable results without manual adjustments. Designed with I2C support and Qwiic/STEMMA QT connectors, it enables quick, solder-free integration into various electronics projects. The board operates smoothly on both 3.3V and 5V supplies, making it compatible with popular microcontroller platforms. Its compact 27×20 mm footprint makes it suitable for space-constrained embedded or portable applications. Built with precision optical filtering to block over 99% infrared light within a ±85° angle for truly accurate lux readings.