KY-039 Finger Heartbeat Detection Sensor

7Semi SHT41 Temperature & Humidity Sensor Tiny Breakout with I2C Qwiic The 7Semi SHT41 Temperature & Humidity Sensor Tiny Breakout is crafted for engineers, IoT developers, and embedded system designers who need precise environmental monitoring in extremely compact spaces. Powered by the fourth-generation SHT41 sensor, it delivers exceptional accuracy with ±1.8% RH and ±0.2°C precision, making it ideal for sensitive applications like HVAC regulation, smart home devices, and industrial IoT nodes. Its stable readings and fast response time ensure reliable environmental sensing even in dynamic conditions. Designed for low-power performance, this breakout operates on a 3.3V supply and consumes less than 0.15 mA in low-power mode, making it a perfect match for wireless systems and battery-powered deployments. With built-in I2C support, multiple address options, and a compact 1.27 mm pitch connector, integration is quick and hassle-free. Whether you're building connected sensors, indoor air-quality systems, or compact IoT hardware, this module provides dependable data for real-time decision-making and energy-efficient operations. Features: Designed with the advanced SHT41 sensor, offering high-precision measurements with ±1.8% RH humidity accuracy and ±0.2°C temperature accuracy. Operates with ultra-low power consumption, drawing less than 0.15mA in low-power mode to extend battery life in portable systems. Supports I2C communication with multiple configurable addresses for flexible integration in multi-sensor setups. Compact and lightweight form factor with a 1.27 mm pitch 4-pin connector, making it suitable for tight-space and embedded applications. Built for industrial-grade reliability, ensuring consistent performance across typical indoor and light industrial environments. Simple plug-and-play workflow enables quick installation for IoT platforms, smart buildings, automation systems, and environmental monitoring.

7Semi MCP9808 I2C Temperature Sensor Breakout The 7Semi MCP9808 I2C Temperature Sensor Breakout is a precision I2C temperature sensor module designed to deliver accurate and reliable temperature measurements with minimal effort. Built around the high-accuracy MCP9808 temperature sensor IC, this breakout board provides easy digital temperature sensing through a standard I2C interface, making it ideal for projects where precise environmental monitoring is essential. It solves the challenge of interfacing analog temperature sensors with microcontrollers by offering a simple digital communication method that eliminates the need for complex calibration. This compact sensor module is highly compatible with popular development platforms like Arduino, Raspberry Pi, and other microcontrollers, offering stable performance and low power consumption. With its high accuracy and straightforward interface, it’s perfect for students, hobbyists, and professionals working on weather stations, HVAC systems, data loggers, thermal control systems, and indoor environmental monitoring projects. Its robust design ensures dependable readings across a wide range of applications, reducing development time and improving overall system reliability. Features: High-accuracy MCP9808 sensor IC with ±0.25 °C typical precision Wide operating temperature range from –40 °C to +125 °C High-resolution temperature readings with 0.0625 °C resolution Supports 2.7V to 5.5V power and logic levels for flexible compatibility I²C interface allows connection of up to 8 sensors on a single bus Compact breakout board for easy integration in embedded projects

SmartElex HTU21D-F Temperature and Humidity Sensor with Breakout Board The SmartElex HTU21D-F Temperature and Humidity Sensor with Breakout Board is a compact and reliable temperature and humidity sensor designed for accurate environmental monitoring. It helps users measure ambient temperature and humidity digitally with stable output, making it suitable for students, makers, educators, and engineers working on sensing and monitoring applications. This digital temperature and humidity sensor is ideal for those who want dependable readings without complex circuitry, especially in learning, testing, and early product development environments. This I2C digital humidity sensor is widely used in IoT systems, weather monitoring projects, automation setups, and data logging applications where consistent environmental data is required. It integrates easily with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick setup and smooth communication through the I2C interface. With its breakout board design and reliable performance, the SmartElex HTU21D-F sensor is well suited for prototyping, robotics projects, and educational labs looking for a practical alternative to traditional sensors like SHT15 breakout boards. Features: Digital temperature and humidity sensor with stable and accurate readings I2C interface for simple and reliable data communication Compact breakout board for quick prototyping and testing Easy to use with Arduino, Raspberry Pi, and ESP32 platforms Suitable for IoT, automation, and environmental monitoring projects Ideal replacement option for older sensors like SHT15 breakout boards

5V WiFi Smart Relay Module for IoT & DIY Projects The 5V WiFi Relay Module is a smart control board that lets you switch electrical devices on and off using a WiFi connection. It works with standard 5V power and can be connected to home networks, allowing remote control of lights, fans, appliances, and other devices through your smartphone or automation system. This module is designed for easy integration with DIY electronics and smart home projects. It provides reliable switching performance and can be used in both residential and hobby automation setups. Whether you’re building a custom smart switch or adding wireless control to your gadgets, the 5V WiFi Relay Module offers a simple and flexible way to make your devices connected and controllable over WiFi. Features: Operates on 5V power supply for easy integration Enables wireless ON/OFF control of electrical devices over WiFi Suitable for smart home and IoT automation projects Supports remote switching via mobile app or automation system Reliable relay-based output for controlling loads safely Compact module design for DIY electronics and embedded systems Ideal for controlling lights, fans, pumps, and appliances

SmartElex 12V 3A 8 Channel Signal Relay Module The SmartElex 12V 3A 8 Channel Signal Relay Module is a reliable control solution designed to switch multiple electrical devices using low-power control signals. It allows users to safely manage higher-voltage or higher-current loads without directly connecting them to sensitive control circuits. This module is suitable for students, makers, engineers, educators, and startups working on embedded systems, automation projects, and control applications that require dependable multi-channel switching. This 8-channel relay module is ideal for robotics, IoT systems, home and industrial automation, and advanced prototyping where several devices need to be controlled independently. It can be easily interfaced with popular platforms such as Arduino, Raspberry Pi, and ESP32 to control lights, motors, pumps, relays, or other external equipment. The straightforward design and consistent performance make it easy to integrate into both experimental setups and finished products, supporting safe and efficient control across a wide range of applications. Features: 8-channel relay module for controlling multiple devices independently Operates on 12V, suitable for automation and control systems Supports up to 3A load current per relay channel Electrical isolation between control signals and load circuits Compatible with Arduino, Raspberry Pi, ESP32, and other controllers Compact board design with LED indicators for channel status

SmartElex RedBot - Line Follower Sensor The SmartElex RedBot Line Follower Sensor is an easy-to-use infrared line tracking sensor designed to detect contrasting lines on the floor for robot navigation. It helps users build robots that can follow black or white track lines by sensing reflected infrared light, making it ideal for students, hobbyists, educators, and beginners in robotics. This line follower sensor removes the complexity of designing a tracking circuit from scratch, making it a practical choice for classroom learning, STEM competitions, and project-based exploration. This IR sensor line follower is commonly used in DIY robots, autonomous navigation systems, automation prototypes, and line-following competitions where reliable tracking is essential. It works smoothly with Arduino, Raspberry Pi, ESP32, and other microcontroller platforms, allowing easy integration and quick setup in existing projects. With stable performance and intuitive operation, the SmartElex RedBot Line Follower Sensor is well suited for prototyping, educational labs, and robotics builds requiring precise line tracking and direction control. Features: Infrared-based line detection for accurate track following Detects black or white line contrast for smooth navigation Simple design for beginner-friendly robotics and STEM projects Compatible with Arduino, Raspberry Pi, ESP32, and other controllers Compact module for easy mounting on small robot chassis Ideal for DIY robots, automation prototypes, and line-following competitions

7Semi DC-DC Buck Converter 5V 3A Out - MP2338 (BO-10182) The 7Semi DC-DC Buck Converter 5V 3A Out – MP2338 (BO-10182) is a compact power module designed to step down higher DC voltages to a stable 5V output with up to 3A current. It provides reliable and efficient power for electronics that require a steady 5V supply, such as microcontrollers, sensors, and development boards. Built around the MP2338 step-down converter, this module offers high efficiency and stable performance while minimizing heat and power loss. It supports a wide input voltage range and includes built-in protection features for safe operation. Whether you’re working on embedded systems, IoT devices, or custom electronics projects, this buck converter makes power management simple and dependable. Features: Boosts power efficiency with a high-performance MP2338 buck converter Provides a stable 5V output at up to 3A for reliable powering Wide input voltage range, compatible with various DC sources Compact breakout module for easy PCB or project integration Built-in protection features for safe and stable operation Ideal for microcontrollers, sensors, IoT boards, and embedded systems

SmartElex Soil Moisture Sensor The SmartElex Soil Moisture Sensor is a simple and efficient sensor module designed to measure the moisture content in soil for gardening, farming, and automation projects. It helps users detect water levels in soil and determine when plants need watering, making it ideal for students, hobbyists, educators, and engineers building smart irrigation or environmental monitoring systems. This soil moisture sensor module offers an easy way to collect data without complex circuit design, providing reliable readings for learning and experimentation. This sensor is commonly used in IoT farming projects, home gardening automation, greenhouse monitoring, and prototype irrigation setups where data-driven watering is required. It works smoothly with Arduino, Raspberry Pi, ESP32, and similar development boards, making integration and testing quick and beginner-friendly. With consistent performance and a user-friendly interface, the SmartElex Soil Moisture Sensor is a practical choice for DIY electronics, academic projects, and early-stage product development focused on smart agriculture and plant care solutions. Features: Measures soil moisture level for plant and irrigation monitoring Simple analog output for easy data reading and interpretation Works smoothly with Arduino, Raspberry Pi, and ESP32 boards Ideal for smart irrigation, gardening, and IoT-based agriculture Beginner-friendly design for quick setup and testing Suitable for DIY projects, classrooms, and agricultural prototypes

SmartElex PCA9306 Logic Level Translator Breakout Module The SmartElex PCA9306 Logic Level Translator Breakout Module is a compact solution designed to shift signal voltages between different logic levels in electronic systems. This PCA9306 level translator helps connect components that operate at mismatched voltages, such as 1.8V, 3.3V, and 5V devices, without risking damage or unstable communication. It is ideal for students, hobbyists, engineers, educators, and startups who need a simple and reliable way to manage voltage differences in mixed-signal circuits, sensor interfaces, and microcontroller projects. With its bidirectional design, this voltage level translator supports seamless communication in both directions, making it suitable for robotics, IoT devices, automation systems, and embedded prototyping. It works smoothly with platforms like Arduino, Raspberry Pi, ESP32, and other controllers, allowing easy integration with modules, displays, and sensors. Whether used as a bidirectional level shifter for I2C communication or for general logic conversion, it offers a practical way to ensure safe and consistent signal translation across a range of development environments. Features: Based on the PCA9306 bidirectional level shifting IC Safely converts logic levels between 1.8V, 3.3V, and 5V devices Supports I2C and general-purpose bidirectional communication Protects components from voltage mismatches and signal damage Compatible with Arduino, Raspberry Pi, ESP32, and other controllers Compact breakout design for fast prototyping and integration

BNO085 9-DOF Orientation IMU Sensor Fusion Nano Breakout Board The BNO085 9-DOF Orientation IMU Sensor Fusion Nano Breakout Board is a powerful and compact motion-sensing solution designed for precise orientation and movement tracking. This BNO085 IMU Sensor combines a 3-axis accelerometer, gyroscope, and magnetometer with an advanced onboard sensor fusion engine that processes raw data into accurate orientation outputs in real time. By handling sensor fusion internally, it reduces processing load on the host microcontroller while delivering reliable heading, rotation, and motion data. With support for I2C and SPI interfaces, the board integrates easily into robotics, VR/AR devices, drones, and IoT systems that demand responsive and accurate motion feedback. Features: Advanced Sensor Fusion: 9-axis integration provides exact data outputs such as acceleration, angular velocity, and magnetic field strength. Low Power use: The ARM Cortex M0+ processor has been optimized for efficient energy use in portable devices. Versatile Compatibility: Backward compatible with BNO080, providing increased dependability through SPI compatibility fixes. Comprehensive Data Reporting: Supports a wide range of calibrated, uncalibrated, and raw data reporting. Enhanced Detection and Classification: Includes stability detection, motion detection, activity classification, and unique AR/VR rotation vectors. Developer-Friendly Interface: I2C interface allows for easy integration with numerous device designs.

7Semi BME688 Environmental Sensor Probe with Gas, Pressure, Temperature & Humidity Sensor The 7Semi BME688 Environmental Sensor Probe is a compact, AI-enabled environmental monitoring solution designed for precise measurements of temperature, humidity, barometric pressure, and gas levels. Built using the advanced Bosch BME688 sensor, it provides highly accurate, real-time environmental data that supports air quality monitoring, research applications, industrial automation, and smart home systems. Housed in a durable plastic shell, the probe ensures long-term stability while maintaining excellent breathability necessary for accurate gas sensing. This versatile environmental probe uses an I2C digital interface for easy integration with microcontrollers and embedded systems, making it suitable for both portable and fixed installations. With a wide operating range and low power consumption, it delivers stable performance even in harsh or fluctuating environments. AI-powered gas sensing adds advanced analytical capabilities such as IAQ scoring, VOC detection, CO₂-equivalent estimation, and bVOC outputs, making this probe a powerful tool for environmental diagnostics and air-quality-driven automation. Features: Provides simultaneous measurement of temperature, humidity, pressure, and gas concentration, enabling complete environmental assessment in a single compact device. AI-powered gas sensing detects VOCs, CO₂-equivalents, and various gases at ppb-level sensitivity for accurate indoor air quality monitoring. Durable plastic enclosure offers strong resistance to corrosion, dust, and temperature variations while maintaining high permeability for reliable sensing. Wide operational range ensures dependable performance from -40 to 85°C and 0–100% RH, suitable for both indoor and outdoor monitoring environments. Low power design supports battery-operated systems, making it ideal for portable, energy-efficient projects. Mini Round Shell (MRS) connector with a 1m cable provides secure and professional-grade installation flexibility. I2C digital communication interface simplifies integration with embedded systems and common microcontrollers. NIST-traceable factory calibration guarantees accuracy for industrial, regulatory, and research applications. Delivers advanced analytical outputs including IAQ, bVOC, CO₂-equivalent, gas intensity, gas scan, and air quality indexes. Humidity Sensors Pins: Digital Humidity and Temperature Sensor Probe I2C Interfacing with MCU:

SmartElex DRV8825 Stepper Motor Driver Module with Aluminum Heat Sink The SmartElex DRV8825 Stepper Motor Driver Module with Aluminum Heat Sink is a compact and efficient solution for controlling bipolar stepper motors with high precision. Built around the trusted TI DRV8825 IC, it supports microstepping up to 1/32 step, enabling smoother motion and finer positional accuracy in applications like 3D printing, CNC machining, and robotics. The module can deliver up to approximately 2.2A peak current with proper cooling, while the integrated aluminum heat sink ensures effective thermal management during continuous operation. Its adjustable current limiting feature protects the motor and driver, improving overall system reliability. With a simple STEP and DIR interface, the module easily integrates with popular platforms such as Arduino, ESP32, and Raspberry Pi, making it an excellent choice for both DIY enthusiasts and professional motion control systems. Features: Based on the TI DRV8825 microstepping bipolar stepper motor driver. Onboard adjustable current limiting potentiometer Supports microstepping up to a 1/32 step. Simple STEP/DIR control interface. Thermal shutdown, overcurrent, and undervoltage protection. Works with 3.3 V and 5 V logic systems. Compact breakout board with an aluminum heat sink for improved cooling.

SmartElex Atmospheric Sensor Breakout – BME280 Temperature, Humidity & Pressure Sensor Module The SmartElex Atmospheric Sensor Breakout is a compact and reliable module designed to measure temperature, humidity, and air pressure with high accuracy. Built around the powerful BME280 sensor, this 3-in-1 sensor module makes it easy to monitor environmental conditions in real time. Perfect for weather stations, IoT systems, and smart home devices, this environmental sensor breakout delivers precise readings while consuming very little power. It supports both I2C and SPI communication interfaces, making it simple to connect with popular boards like Arduino, ESP32, or Raspberry Pi. Whether you’re building an automation project or a DIY weather monitor, this temperature, humidity, and pressure sensor breakout provides reliable performance and easy integration. It’s a great choice for makers, students, and developers who want accurate environmental data in a small and efficient module. Features: 3-in-1 Environmental Sensor: Accurately measures temperature, humidity, and barometric pressure using the BME280 sensor. High Precision Readings: Provides stable and accurate data for weather monitoring and environmental analysis. I2C & SPI Compatible: This I2C SPI environmental sensor module easily interfaces with Arduino, ESP32, Raspberry Pi, and other microcontrollers. Compact Design: Small and lightweight, making it perfect for embedded systems, IoT devices, and portable applications. Low Power Consumption: Efficient sensor design ensures reliable long-term use in battery-powered projects. Easy to Integrate: Ideal for beginners and professionals working on DIY weather stations, home automation, or environmental monitoring systems.

7Semi BME688 Environmental Sensor Nano Breakout with 2.54mm Pitch Header The 7Semi BME688 Environmental Sensor Nano Breakout with 2.54mm Pitch Header is a versatile and high-precision environmental sensor designed for modern monitoring applications. Built around Bosch’s advanced BME688, it accurately tracks temperature, humidity, air pressure, and gas levels, helping you gain meaningful insights into environmental conditions. Its compact nano form factor and I2C interface make integration simple with Arduino, Raspberry Pi, and other development boards. Whether you’re building a smart home system, an industrial monitoring setup, or an environmental research project, this environmental monitoring sensor delivers dependable performance in a user-friendly design. Features: AI-Enhanced Gas Sensing: Identifies dangerous gasses with exceptional accuracy. Comprehensive Monitoring: A single sensor measures numerous essential environmental factors. Flexible Interface: I2C connectivity enables seamless interaction with microcontrollers. Compact design: The nano breakout board is ideal for projects with limited space. 3.3V Operating Voltage: Suitable for a wide range of development boards. Gas sensor sensitivity, selectivity, and data rate can all be adjusted to meet your individual application requirements.

SmartElex LHI778 PIR Motion Sensor Module The SmartElex LHI778 PIR Motion Sensor Module is a passive infrared motion detection solution designed to sense human movement by detecting changes in infrared radiation. It helps solve the problem of automatic motion detection without continuous monitoring, making systems more energy efficient and responsive. This module is suitable for students, makers, engineers, educators, and startups working on electronics projects that require reliable motion sensing for control, security, or automation purposes. This PIR motion sensor module is widely used in robotics, IoT devices, security systems, and home or industrial automation projects where movement detection is required. It can be easily interfaced with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick integration into prototypes and functional systems. The simple interface and consistent performance make it ideal for applications like motion-activated lighting, intrusion detection, smart alarms, and interactive electronic projects. Features: Passive infrared (PIR) sensor for reliable human motion detection Detects movement by sensing changes in infrared radiation Low power operation suitable for battery-powered projects Digital output for easy interfacing with microcontrollers Compatible with Arduino, Raspberry Pi, ESP32, and similar boards Ideal for security systems, automation, and motion-activated applications