0
0
0
0
My Menu
Hobbed M8 Bolt for Wade's Extruder
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible
Iotcart SES-P-120 Hobbed M8 Bolt for 3D Printer Extruder - Wade's Compatible

Hobbed M8 Bolt for Wade's Extruder

(0)
Hobbed M8 Bolt for Wade's Extruder The Hobbed Screw for Greg Wade's Step Extruder. It is suitable for the Wade's and similar extruder designs. The hobbed bolt is used to push the filament into the nozzle and has a strong driving force. There are two depth teeth, one is hollow 0.5mm and the other deeper 1 mm. M8 hobbed bolt for a RepRap-style 3D printer and Lulzbot Taz 4 3D Printer. Hex Head Cap Screw M8 Size, 60 mm Length, 1 mm Pitch. Made from 18-8 stainless steel, which offers excellent corrosion resistance, these metric cap screws have a Class …
Sale Accelerators
Hurry up! Only 6 left in stock
Condition: NEW
As low as ₹113.79   ₹208.60 Incl. GST (No Hidden Charges)
Backorder Available Delivery: Next Day Delivery
IN STOCK SKU#: IOT-120
Delivery & Pickup Options
Get it Next Day on Order

Order now and we'll have it ready for delivery by the next business day.

For bulk orders or wholesale inquiries, please contact us at Email: support@iotcart.in or call/message us at Phone: 8050206487.

Hobbed M8 Bolt for Wade's Extruder The Hobbed Screw for Greg Wade's Step Extruder. It is suitable for the Wade's and similar extruder designs. The hobbed bolt is used to push the filament into the nozzle and has a strong driving force. There are two depth teeth, one is hollow 0.5mm and the other deeper 1 mm. M8 hobbed bolt for a RepRap-style 3D printer and Lulzbot Taz 4 3D Printer. Hex Head Cap Screw M8 Size, 60 mm Length, 1 mm Pitch. Made from 18-8 stainless steel, which offers excellent corrosion resistance, these metric cap screws have a Class 6g thread fit and may be mildly magnetic They have a minimum tensile strength of 100,000 psi but are not rated for hardness Screw length is measured from under the head. Also check the M5 Ultra Low Profile Bolts 6mm-50mm size Black Oxide Coated available on the Iotcart website. The bolts are used to fasten holds to climbing walls, with each hold requiring a specific length. The 10mm size of these bolts has a black oxide coating, and they feature a flat head (Martini Bolts), making them suitable for use with small feet and shallow bolt depths.

  • OEM-grade M8 hobbed bolt for 3D printer extruders
  • Dual-depth teeth: 0.5mm and 1mm for superior filament grip
  • Made from 18-8 stainless steel with 100,000 psi tensile strength
  • Compatible with Lulzbot Taz 4, Wade's, and RepRap extruders
  • Hex head cap screw, 60mm length, 1mm pitch
  • Corrosion-resistant stainless steel construction
  • Precision hobbing for reliable filament feeding
  • Hex head for easy installation with standard tools
  • Suitable for PLA, ABS, PETG, and other common filaments
  • Backorder supported with max order quantity of 6 units
Material Stainless Steel
Length (mm) 6
Type M8
Is the SES-P-120 Hobbed M8 Bolt compatible with Lulzbot Taz 4?

Yes, it is fully compatible with Lulzbot Taz 4 and most RepRap-style extruders.

What material is the hobbed bolt made of?

Made from 18-8 stainless steel for corrosion resistance and durability.

What are the tooth depths on the hobbed section?

Features dual-depth teeth: 0.5mm and 1mm for optimal filament grip.

Can this bolt be used with non-Wade extruders?

Yes, it works with any M8 hobbed bolt-compatible extruder design.

To rate this product please login!

About Hobbed M8 Bolt for Wade's Extruder by Iotcart

Buy SES-P-120 Hobbed M8 Bolt made of 18-8 stainless steel. Compatible with Lulzbot Taz 4, RepRap extruders. Dual-depth teeth for optimal filament grip.

Categorised under: Extruders & Heat Blocks

Related products

Related products

PC6-01 Pneumatic Push-in Bowden Extruder for 3.0mm J-Head - 3D Printer Fitting
PC6-01 Pneumatic Push-in Bowd…
(0)
PC6-01 Pneumatic Push in Bowden Extruders for 3.0mm J-Head fitting The PC6-01 Pneumatic Push in Bowden Extruder for 3 mm J-Head fitting is a small part that connects the PTFE tubing to 1.75 mm Filament extruder assemblies on 3D Printers. It is compatible with the standard up to 3 mm ID PTFE Tubing, with a thread that universally fits M10 extruder fittings. This PC6- 01 Bowden Connector is used in 3D printers with 1.75 mm Bowden-style extruder assemblies, to provide a cool, safe, and neat path for the filament to travel. This ensures that it reaches the hotend assembly without any problems, which translates to better quality prints and greater consistency. The connector utilizes a John Guest fitting, which tightens with tension, to ensure that it maintains a firm grip on the tubing. It’s easy to see why this connector is such a popular choice for Bowden-style extruders, as their compatibility and high corrosion resistance make it a valuable investment for 3D printing.
₹34.36  
Backorder Available In Store Pickup Same Day Shipping
₹60.20
Incl. GST (No Hidden Charges)
Iotcart SES-P-95 MK8 Left Side Aluminum 3D Printer Extruder Kit - Buy Online in India
Iotcart SES-P-95 MK8 Left Sid…
(0)
Extruder Kit Left Side MK8 Aluminum 3D Printer Block This is a high quality MK8 Extruder Replacement Aluminum Alloy Block. Use it to replace your blocked/damaged extruder. This block comes in a kit form and requires assembly by the user. Since this is a very popular numerous assembly instructions and videos are available on the internet which will help you build your extruder. The MK8 Extruder is available in 3 different types – Right Side, Left Side and Right Short. These extruders differ in the direction in which the filament is extruded with respect to the extruder block. When using single extruders, any extruder can be used. When using dual extruders you can use one right side and one left side extruder as shown in the product image. Also check the Short Handle MK8 Extruder Aluminum Alloy for 3D Printer Block - Right Short . It is designed for use in different types of 3D printers, supporting both bowden and MK8 extrusion. The extruder is compatible with a NEMA 17 stepper motor and aims to reduce wiredrawing issues during remote feeding.
₹222.16  
Backorder Available In Store Pickup Same Day Shipping
₹438.20
Incl. GST (No Hidden Charges)
V6 Heat Break Hotend Throat with Teflon Tube for 3.0 mm Filament - 3D Printer Part
V6 Heat Break Hotend Throat w…
(0)
V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament This is a V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.0 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V6 heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle. check out : V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament
₹42.27  
Backorder Available In Store Pickup Same Day Shipping
₹74.20
Incl. GST (No Hidden Charges)
V6 Bowden Heat Break Hotend Throat with Teflon Tube for 3.00 mm Filament - 3D Printer Part
V6 Bowden Heat Break Hotend T…
(0)
V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament This is a V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.00 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V6 Bowden heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle.
₹33.59  
Backorder Available In Store Pickup Same Day Shipping
₹60.20
Incl. GST (No Hidden Charges)
Iotcart SES-P-165 0.2mm Copper Nozzle for MK8 Reprap 3D Printers - Buy Online in India
Iotcart SES-P-165 0.2mm Coppe…
(0)
0.2mm Copper Extruder Nozzle Print Head For Makerbot MK8 Reprap 3D Printer 0.2mm Nozzle is made of hardened steel for 1.75 mm filament. It is compatible with E3D v6 kits and is to be used for filament filled with carbon fiber or other abrasive materials. Normally Carbon-filled filaments cause rapid and significant damage to standard nozzles, so these nozzles are best to use. By using this nozzle you can print with carbon fiber, filled PLA, or glow-in-the-dark filaments. Copper (brass).Good abrasion resistance, heat resistance, and corrosion resistance. check out : 1.75mm Natural ABS Filament -1Kg
₹21.68  
Backorder Available
₹47.60
Incl. GST (No Hidden Charges)
Iotcart V5 Heat Break Hotend Throat with Teflon Tube for 1.75mm Filament - 3D Printer Upgrade
Iotcart V5 Heat Break Hotend …
(0)
V5 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. check out : PTFE 3x4mm White Teflon Tube for 3mm 3D Printer Filament - 1 Meter (3mm ID X 4mm OD) Also check V5 Heat Break Hotend Throat Without Teflon Tube designed for 1.75mm filament . It is compatible with the E3D V5 hot end for 3mm filament. Made from high-grade stainless steel, the heat break prevents heat creep and clogs.
₹41.18  
Backorder Available
₹61.60
Incl. GST (No Hidden Charges)
Volcano Hot End Heater Block for 3D Printers - High-Temp Upgrade
Volcano Hot End Heater Block …
(0)
Volcano hot end Heater Block/Heating Block for 3D Printer This is the specialised heater block for Volcano upgrade pack. Compatible with all Volcano Nozzles and all HotEnds except Cyclops. This block uses the same clamped thermistor mounting configuration as the E3D-v6 Heater Block for maximum ease of use and security. The block also has a heater cartridge clamping system for maximum heat transfer, this time using two screws for clamping instead of the one in E3D-v6. This block absolutely cannot be used with a non Volcano nozzle, plastic will go everywhere, please don't try. Volcano uses the same thermistor, Heater Cartridge, fixings methods and procedures as E3D-v6 hotends . As such assembly of Volcano is essentially identical to that of the standard E3D-v6 block, the only notable difference is that there are two heater clamping screws, and the heater wires should exit through the top of the block.
₹87.78  
Backorder Available
₹126.00
Incl. GST (No Hidden Charges)
3D INKJET E3D V6 J-Head 1.75mm 285°C Extruder Kit - 3D Printer Upgrade
3D INKJET E3D V6 J-Head 1.75m…
(0)
3D INKJET E3D V6 J-head Extruder Kit The 3D extruder is the part of the 3D printer that ejects material in liquid or semi-liquid form in order to deposit it in successive layers within the 3D printing volume. Extruder is considered as one of the important components of a 3D printer. It is the part of the 3D printer responsible for drawing in, melting and pushing out the filament. check out : 3mm 100g Green ABS Filament
₹577.62  
Backorder Available
₹1050.00
Incl. GST (No Hidden Charges)
V6 Volcano Brass Extruder Nozzle 3.0mm x 1.2mm for High-Speed 3D Printing
V6 Volcano Brass Extruder Noz…
(0)
V6 Volcano Brass Length Extruder Nozzle 3.0mm x 1.2mm V6 Brass Volcano Nozzles are High-performance brass nozzles for your Volcano HotEnd. From super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints in no time with the Volcano HotEnd PowerUp! These nozzles are immediately compatible with the Lulzbot Moarstruder, but many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano. Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights and at extremely high flow rates. V6 Brass Volcano Nozzle has extra long heated melt zones for ultimate filament melt speeds. Volcano nozzles are designed with speed in mind. They excel at large layer heights with extremely high flow rates which can reduce your print time. All volcano nozzles are marked so that you know exactly what size you are working with. The nozzle has a longer heated zone when compared to most hotend nozzles. This means that the filament is heating slightly faster, therefore it has accelerated melting speeds. The brass Volcano nozzle performs excellently with non-abrasive filaments such as PLA, ABS, PETG, Nylon, ASA and TPU. Due to the special shape and the low coefficient of friction, no filament residues remain on the inside of the nozzle, even with extremely long printing times. Due to this low resistance, an optimal flow is achieved that ensures the perfect extrusion and therefore an undisturbed 3D printing process. check out : V6 Volcano Brass Length Extruder Nozzle 3.0mm x 1.0mm Note: Volcano nozzles are only compatible with the Volcano block.
₹53.10  
Backorder Available
₹77.00
Incl. GST (No Hidden Charges)
Buy Iotcart MK8 Aluminium Hot End Heating Block for 3D Printers - Extruder Upgrade | Price in India
Buy Iotcart MK8 Aluminium Hot…
(0)
Aluminium Hot End Heating Block MK8 For 3D Printers Heat block MK8  is a 3D printer’s  is the part of the extruder so the nozzle meets the thermal barrier tube. Contained within the  block is also the heater cartridge and thermocouple was typically made of aluminum in which the part functions literally melting the filament as it passes through the thermal tube to be extruded out of the nozzle. The mounting hole works perfect with nozzle & nozzle throat. Reliable accessory for 3D printer DIY lovers.
₹53.10  
Backorder Available
₹78.40
Incl. GST (No Hidden Charges)
V6 Bowden Heat Break Hotend Throat for 1.75mm Filament - 3D Printer Part
V6 Bowden Heat Break Hotend T…
(0)
V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament This is a V6 Bowden Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V6 Bowden heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle.
₹35.77  
Backorder Available
₹63.00
Incl. GST (No Hidden Charges)
V6 Volcano Brass Extruder Nozzle 1.75mm x 0.8mm - 3D Printer Accessory
V6 Volcano Brass Extruder Noz…
(0)
V6 Volcano Brass Length Extruder Nozzle 1.75mm x 0.8mm V6 Brass Volcano Nozzles are High-performance brass nozzles for your Volcano HotEnd. From super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints in no time with the Volcano HotEnd PowerUp! These nozzles are immediately compatible with the Lulzbot Moarstruder, but many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano. Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights and at extremely high flow rates. V6 Brass Volcano Nozzle has extra long heated melt zones for ultimate filament melt speeds. Volcano nozzles are designed with speed in mind. They excel at large layer heights with extremely high flow rates which can reduce your print time. All volcano nozzles are marked so that you know exactly what size you are working with. The nozzle has a longer heated zone when compared to most hotend nozzles. This means that the filament is heating slightly faster, therefore it has accelerated melting speeds. The brass Volcano nozzle performs excellently with non-abrasive filaments such as PLA, ABS, PETG, Nylon, ASA and TPU. check out : 1.75mm 100g White ABS Filament Due to the special shape and the low coefficient of friction, no filament residues remain on the inside of the nozzle, even with extremely long printing times. Due to this low resistance, an optimal flow is achieved that ensures the perfect extrusion and therefore an undisturbed 3D printing process. Note: Volcano nozzles are only compatible with the Volcano block.
₹54.19  
Backorder Available
₹124.60
Incl. GST (No Hidden Charges)
Iotcart MK8 Extruder for 3D Printers - High Precision Printing
Iotcart MK8 Extruder for 3D P…
(0)
MK8 Extruder for 3D printers The MK8 extruder features outstanding quality and ensures better performance for 3D printers . The MK8 extruder is manufactured with a V design which makes it convenient for users to load the filament right to the end of the barrel. This extruder model for 3D printers is equipped with a PTFE tube inside the barrel. This ensures that there is fluent feeding of the filament. It also features a self-lubricating system that avoids any blockage.
₹1029.53  
Backorder Available
₹2812.60
Incl. GST (No Hidden Charges)
V6 Volcano Brass Extruder Nozzle 3.0mm x 0.8mm for 3D Printers - Buy in India
V6 Volcano Brass Extruder Noz…
(0)
V6 Volcano Brass Length Extruder Nozzle 3.0mm x 0.8mm V6 Brass Volcano Nozzles are High-performance brass nozzles for your Volcano HotEnd. From super-fine to super-fat layering, you’ll be making stronger, faster and bigger prints in no time with the Volcano HotEnd PowerUp! These nozzles are immediately compatible with the Lulzbot Moarstruder, but many RepRap 3D printers including the Prusa i3 can be upgraded with a Volcano. Volcano nozzles are super fast printing nozzles for use with the Volcano block and packs to print large layer heights and at extremely high flow rates. V6 Brass Volcano Nozzle has extra long heated melt zones for ultimate filament melt speeds. Volcano nozzles are designed with speed in mind. They excel at large layer heights with extremely high flow rates which can reduce your print time. All volcano nozzles are marked so that you know exactly what size you are working with. The nozzle has a longer heated zone when compared to most hotend nozzles. This means that the filament is heating slightly faster, therefore it has accelerated melting speeds. The brass Volcano nozzle performs excellently with non-abrasive filaments such as PLA, ABS, PETG, Nylon, ASA and TPU. Due to the special shape and the low coefficient of friction, no filament residues remain on the inside of the nozzle, even with extremely long printing times. Due to this low resistance, an optimal flow is achieved that ensures the perfect extrusion and therefore an undisturbed 3D printing process. Note: Volcano nozzles are only compatible with the Volcano block.
₹49.85  
Backorder Available
₹77.00
Incl. GST (No Hidden Charges)
V5 Heat Break Hotend Throat with Teflon Tube for 3.0 mm Filament - 3D Printer Upgrade
V5 Heat Break Hotend Throat w…
(0)
V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament This is a V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament. This is a heat break compatible with the E3D V5 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.0 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V5 heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle. check out : V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament
₹37.93  
Backorder Available
₹60.20
Incl. GST (No Hidden Charges)

Features

icon

Backgrounds

Full Screen mode

Mode
On
Off

Dark mode

Mode
On
Off

Clear local storage

Clear Cache & Default
0
0