EMAX ECO Micro 1106 6000KV CW Brushless Motor for FPV Racing Drones

ULN2003 12V Stepper Motor Driver This 12V DC 28BYJ-48 Stepper Motor is a low-cost, high-quality geared stepper motor. Because of the system's stability and reliability, the 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a popular combination of stepper motor and stepper driver. The pack includes the ULN2003 Stepper Motor Driver, which is a Mini Stepper Motor Driver. The main function of the ULN2003 is to amplify the control signals from the Arduino so that they can be used to drive the 28BYJ-48 Stepper Motor. If you want to control the stepper motor with the stepper motor driver, for that you will need a few essential components like Arduino jumper wires batteries or power supply Features: Stepper motor with a standard interface, when used directly pluggable. A, B, C, D four-phase LED indicator which indicates the status of the stepper motor work. Compact-size stepper motor perfect for small robotics applications. Also, read our blog What is Motor Driver detailing an overview of motor drivers, including the different types available and how they work.

28BYJ-48 5V DC Stepper Motor This 5V DC 28BYJ-48 Stepper Motor is small, inexpensive and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system. The motor has a reduction ratio of 64:1, so it offers a decent torque for its size at speeds of about 15 RPM. It is a unipolar stepper motor which has 5-wires. As stated before the pack contains ULN2003 Stepper motor driver which is a Mini Stepper Motor Driver.The main purpose of ULN2003 is to amplify the control signals from the Arduino, so as to drive the 28BYJ-48 Stepper Motor. If you will give the ULN2003 Stepper motor driver a certain pulse signal, it will drive step motor to a certain angle.The control of Stepper motor movement angle is done by controlling the number of stepper motor driver pulses. The speed of the stepper motor rotation is also controllable by controlling the frequency of the pulses. Connect the 28BYJ-48 motor with the ULN2003 motor driver then interface this combination of motor and driver with Arduino , do some coding and your 28BYJ-48 Stepper Motor is ready to listen to your commands Features: Stepper motor with a standard interface, when used directly pluggable. A, B, C, D four-phase LED indicator which indicates the status of the stepper motor work. Compact-size stepper motor perfect for small robotics applications. Applications: Cameras for providing precise control and positioning. Tilting of car side mirrors can be controlled using these motors. CNC Machines Robotic Arms Home Automation

The DIY Mini Wind Turbine Blade Set is a compact, vertical-axis wind turbine kit designed for educational, experimental, and small-scale renewable energy applications. Ideal for hobbyists, students, and engineers, this micro generator blade set enables hands-on learning about wind energy conversion and sustainable power generation. Each blade is precision-engineered for optimal aerodynamic efficiency at low wind speeds, making it perfect for indoor demonstrations or outdoor micro-generation setups. This set includes lightweight, durable blades compatible with most small DC generators and motors repurposed as generators. The vertical axis design ensures 360-degree wind capture, eliminating the need for yaw mechanisms and allowing operation from any wind direction. It's widely used in STEM education, science fairs, IoT energy harvesting prototypes, and off-grid sensor power systems. Easy to assemble and integrate, the kit supports experimentation with blade pitch, count, and generator coupling. Whether you're building a wind-powered charger, environmental monitoring station, or classroom demo, this turbine blade set offers a practical, low-cost entry into wind energy technology. Available for fast delivery across India.

HGLRC ELRS 2.4G Receiver The HGLRC ELRS 2.4G Receiver is a compact and efficient communication module designed for use in remote-controlled devices such as FPV drones. Operating on the reliable 2.4GHz frequency, it delivers fast and stable signal transmission with low latency, ensuring precise control during flight. Its small size and lightweight design make it easy to integrate into various drone builds without adding extra weight or complexity. This receiver supports advanced features like telemetry, allowing real-time data such as signal strength and system status to be sent back to the transmitter for improved monitoring and control. Built for performance and reliability, it is ideal for FPV enthusiasts who require consistent connectivity, enhanced responsiveness, and better overall flight experience in both racing and freestyle applications. Features: Operates on the reliable 2.4GHz frequency, ensuring stable and interference-resistant communication for RC models Supports ELRS (ExpressLRS) protocol, providing long-range connectivity and efficient signal performance Compact and lightweight design allows easy installation without adding extra weight to the drone or aircraft Delivers ultra-low latency, enabling fast and precise control for better responsiveness during flight Suitable for FPV drones and RC aircraft, making it a versatile choice for both racing and recreational use Offers consistent signal strength for smooth and uninterrupted operation Designed for high performance in demanding flying conditions Enhances overall control experience with improved reliability and efficiency

Holybro Pixhawk 6C Flight Controller With PM02 Power Module The Holybro Pixhawk 6C Flight Controller with PM02 Power Module is a powerful and reliable pixhawk flight controller built for advanced drone applications. Powered by a high-performance 32-bit processor, it delivers fast sensor processing, accurate flight control, and stable performance across multirotor, fixed-wing, and VTOL platforms. Designed for compatibility with popular open-source firmware, this controller is ideal for developers, researchers, and drone builders who require precision, flexibility, and dependable operation in demanding flight conditions. This drone flight controller comes bundled with the PM02 flight controller power module, providing clean and regulated power directly from a LiPo battery while monitoring real-time voltage and current. The integrated power module improves safety, simplifies wiring, and ensures consistent power delivery to the flight controller and connected peripherals. Whether you are building a professional UAV or a custom drone project, this combination offers a streamlined setup, enhanced reliability, and efficient power management in one complete solution. Features: High-performance pixhawk flight controller designed for fast processing and stable, precise drone control across various flight modes. Integrated PM02 flight controller power module ensures clean, regulated power delivery while monitoring real-time voltage and current for safer operation. Supports multiple drone platforms including multirotor, fixed-wing, and VTOL, making it suitable for a wide range of UAV applications. Compatible with popular open-source flight control firmware, offering flexibility for customization and advanced autonomous missions. Streamlined power and signal connections reduce wiring complexity and improve overall system reliability. Built for professional UAV development, research projects, and advanced hobbyist drone builds.

Radiolink AT9S Pro 2.4GHz 12CH RC Transmitter The Radiolink AT9S Pro is a professional 2.4GHz 12-channel RC transmitter designed for drones, RC airplanes, helicopters, cars, boats, and robotics applications. Built with advanced FHSS spread spectrum technology, it delivers stable signal transmission, low latency response, and strong anti-interference performance for precise control. Paired with the R9DS receiver, this radio controller supports long-range operation and high-resolution signal output, making it ideal for FPV racing drones, aerial photography UAVs, and complex RC models. The large LCD display allows easy parameter configuration, while multiple programmable mixing options enhance customization for advanced users. Engineered with an ergonomic design and premium gimbals, the AT9S Pro ensures smooth handling and accurate stick response during extended sessions. It supports firmware upgrades and simulator connectivity, making it suitable for both serious hobbyists and professional RC pilots. Features: Advanced DSSS and FHSS technology ensures stable signal transmission with control range up to 2.1 miles (3.4 km) in air Supports 10/12 channels with telemetry capability (with PRM-03 module) Includes throttle cut, dual rates, switch assignment, programmable mixing, fail-safe, reverse polarity protection, and multiple model settings Built-in safety alerts with RSSI warning and low voltage alarms for radio, receiver, and model Audible alerts, vibration feedback, and on-screen LCD notifications for operation in noisy environments 3-in-1 multifunction port supporting simulator connectivity, TBS Crossfire protocol (915 module), and wireless trainer mode (modules sold separately) Pre-programmed modes for RC airplane, helicopter, glider, multirotor, car, and boat Stores up to 15 models in memory Compatible with R12DS, R12DSM, R9DS, R6DS, and R6DSM receivers

HGLRC Zeus VTX PRO 1.6W The HGLRC Zeus VTX PRO 1.6W is a high-performance FPV video transmitter designed to deliver strong, stable, and long-range video transmission for drone pilots. With a powerful 1.6W output, it ensures clear signal quality even in challenging environments, making it suitable for racing, freestyle, and extended-distance flights. It supports multiple adjustable power levels and frequency channels, offering great flexibility and compatibility across different FPV setups. Equipped with SmartAudio technology, the VTX allows real-time control of settings like power and channel directly through the flight controller for added convenience. Its efficient heat dissipation design ensures consistent performance during long flights, while the compact and lightweight build makes it easy to integrate into various drone configurations. Features: Delivers high 1.6W output power for reliable long-range video transmission Multiple adjustable power levels for flexible performance based on flying conditions Supports a wide range of frequency channels for better compatibility and reduced interference Integrated Smart Audio technology enables real-time control via the flight controller Optimized for FPV drones, making it ideal for racing, freestyle, and long-range flying Ensures stable and clear video output for an enhanced FPV experience Designed for low latency and consistent signal strength during flight Compact and efficient build for easy installation and improved heat management

SmartElex LSM303AGR Accelerometer/Magnetometer The SmartElex LSM303AGR Accelerometer & Magnetometer digital tilt and compass sensor is a compact, high-precision module designed to measure motion, orientation, and heading in embedded and IoT projects. It integrates a 3-axis accelerometer to sense tilt and gravity direction, along with a 3-axis magnetometer to detect magnetic fields and determine compass heading. By combining both sensor outputs, the module enables accurate orientation and navigation data for robotics, drones, wearables, and motion-aware systems. Based on the latest LSM303AGR sensor, it communicates via I2C, works seamlessly with both 3.3V and 5V microcontrollers, and comes fully assembled on a breakout PCB with onboard support circuitry—making it easy to use, solder-free, and ready for real-world applications. Features: LSM303AGR - Triple-axis accelerometer and magnetometer. I2C Communication Interface. Supply voltage - 3.3V 5V 50 mGauss magnetic dynamic range. 1.5 gauss magnetic sensitivity. Accelerometer ranges: 2/4/8/16g. Accelerometer sensitivity is as low as 1mg

SmartElex MPL3115A2 Altitude Pressure Sensor Breakout Board The SmartElex MPL3115A2 Altitude Pressure Sensor Breakout Board is a compact and reliable altitude sensor module designed for precise environmental measurements. Based on the MPL3115A2 MEMS sensor, it delivers altitude data with accuracy up to 30 cm and pressure readings in fractions of a Pascal using a high-resolution 24-bit ADC. The sensor communicates via I2C, making it simple to interface with popular microcontrollers and development boards. This Breakout Board includes all required passive components and exposes the pins on a 0.1″ header, allowing quick prototyping without extra circuitry. With added 12-bit temperature sensing, this Altitude Pressure Sensor is well-suited for drones, weather monitoring, navigation systems, and embedded IoT applications. Features: Supply voltage ranges from 1.95V to 3.6V and is internally regulated by the LDO. Digital interface supply voltage ranges from 1.6 to 3.6 V. Internally, fully compensated. Direct reading, compensated. Pressure: 20-bit measurement (in Pascals) Altitude: 20-bit measurement (metres) Temperature: 12-bit measurement (in degrees Celsius) Programmable events. Autonomous Data Acquisition Resolution down to 1 ft. (30 cm) 32 Sample FIFO Ability to log data for up to 12 days using the FIFO method Data acquisition rates range from one second to nine hours. I2C digital output interface operates at up to 400 kHz.

HGLRC M80 PRO GPS Module for FPV Racing Drones The HGLRC M80 PRO is a reliable and efficient FPV drone GPS module built to deliver accurate positioning and enhanced flight control for FPV racing drones. Equipped with a QMC5883 compass chip, it ensures precise directional data and quick location identification during flight. The module features a high-sensitivity antenna that provides stronger signal reception, allowing faster satellite acquisition and stable connectivity even in challenging environments. With its convenient plug-and-play design, the HGLRC M80 PRO eliminates the need for soldering, making installation simple and hassle-free. This GPS module is an essential upgrade for pilots looking to improve navigation accuracy, enable return-to-home functionality, and enhance overall drone safety and performance. Features: GPS with high precision ensures accurate positioning. Fast satellite acquisition for a rapid start. For maximum dependability, GPS and GLONASS are supported. Compact and light-weight design. A compass is built-in to help with orientation.

HQProp 15X7X3 (1 CW + 1 CCW) Black-Glass Fiber Reinforced Nylon Drone Propeller The HQProp 15X7X3 (1 CW + 1 CCW) is a high-quality drone propeller built to deliver powerful and stable performance for multirotor drones. With an exact size of 15 inch propeller (15x7x3), it is engineered to generate strong thrust while maintaining smooth and efficient flight characteristics. Constructed from black glass fiber reinforced nylon, this propeller ensures excellent durability, stiffness, and resistance to wear, making it suitable for demanding flight conditions. The set includes one clockwise (CW) and one counter-clockwise (CCW) propeller, enabling proper balance and control in drone setups. Its core function is to provide optimal lift, efficiency, and maneuverability, making it an ideal choice for drone pilots who require reliable performance for aerial applications, heavy lifting, or precision flying. Features: Diverse Selection: HQProp provides a wide range of propellers in various sizes, pitches, blade counts, and materials. This enables drone pilots to select propellers that meet their individual criteria, such as speed, agility, efficiency, or stability. Material Options: HQProp manufactures propellers in a variety of materials, including durable polycarbonate, lightweight carbon fiber, and other composite materials. The material used to make propellers can influence their performance attributes such as thrust, efficiency, and durability. Design Innovation: HQProp is well-known for its creative propeller designs that strive to improve performance while reducing noise. Some designs include distinctive blade forms, curved tips, and enhanced aerodynamics to improve efficiency and control. FPV Racing and Freestyle: HQProp has a strong presence in both the FPV racing and freestyle drone communities. Many of their propellers are engineered for rapid acceleration, high speeds, and agile movements, making them popular choices for competitive racing and freestyle flying. Compatibility: HQProp propellers come in a variety of diameters to accommodate different motor setups and drone frame designs. They provide propellers for both normal and inverted flight configurations. Color Options: HQProp propellers frequently come in a range of colors, allowing drone pilots to customize the appearance of their drones. Performance Tuning: The option to select multiple propeller sizes and pitches enables pilots to fine-tune their drones' performance for specific objectives, such as increasing peak speeds, improving control, or extending flying periods. Usage Considerations: HQProp propellers, like all propellers, should be carefully selected depending on engine specs, drone weight, flight style, and intended purpose. Choosing the appropriate propellers can significantly improve flight performance and efficiency.

Holybro Pixhawk 6C Flight Controller With PM02 Power Module and M9N GPS The Holybro Pixhawk 6C Flight Controller with PM02 Power Module and M9N GPS is an advanced pixhawk flight controller built to deliver reliable, precise control for a wide range of UAV platforms. Equipped with a high-performance processor and advanced sensors, this controller ensures stable flight dynamics, quick response times, and superior handling for multirotor, fixed-wing, and VTOL drones. Designed with both hobbyists and professional developers in mind, it supports popular open-source firmware and provides the flexibility needed for autonomous missions, research applications, and custom drone builds. This complete package includes a robust drone flight controller, the PM02 power module for clean and regulated energy supply with real-time current and voltage monitoring, and the high-precision GPS module with integrated compass for accurate positioning and navigation. Together, these components simplify setup, enhance flight reliability, and improve overall performance, making it an ideal choice for builders seeking a comprehensive flight system with dependable power management and precision location tracking. Features: High-performance pixhawk flight controller designed for fast processing and stable, accurate drone control. Includes PM02 power module for clean and regulated power delivery with real-time voltage and current monitoring. Comes with M9N GPS module and integrated compass for precise positioning and reliable navigation. Supports multirotor, fixed-wing, and VTOL drone platforms for versatile UAV applications. Compatible with popular open-source flight controller firmware for flexible customization. Simplified wiring and robust power management improve safety and overall system reliability.

BNO085 9-DOF Orientation IMU Sensor Fusion Nano Breakout Board The BNO085 9-DOF Orientation IMU Sensor Fusion Nano Breakout Board is a powerful and compact motion-sensing solution designed for precise orientation and movement tracking. This BNO085 IMU Sensor combines a 3-axis accelerometer, gyroscope, and magnetometer with an advanced onboard sensor fusion engine that processes raw data into accurate orientation outputs in real time. By handling sensor fusion internally, it reduces processing load on the host microcontroller while delivering reliable heading, rotation, and motion data. With support for I2C and SPI interfaces, the board integrates easily into robotics, VR/AR devices, drones, and IoT systems that demand responsive and accurate motion feedback. Features: Advanced Sensor Fusion: 9-axis integration provides exact data outputs such as acceleration, angular velocity, and magnetic field strength. Low Power use: The ARM Cortex M0+ processor has been optimized for efficient energy use in portable devices. Versatile Compatibility: Backward compatible with BNO080, providing increased dependability through SPI compatibility fixes. Comprehensive Data Reporting: Supports a wide range of calibrated, uncalibrated, and raw data reporting. Enhanced Detection and Classification: Includes stability detection, motion detection, activity classification, and unique AR/VR rotation vectors. Developer-Friendly Interface: I2C interface allows for easy integration with numerous device designs.

HGLRC M100 PRO GPS The HGLRC M100 PRO GPS is a compact and high-precision GPS module designed for drone applications. It utilizes a u-blox M10 chip, offering fast and accurate positioning with support for multiple satellite constellations, including GPS, GLONASS, Galileo, and BeiDou. This multi-constellation capability enhances signal reliability and accuracy, even in challenging environments. The module is known for its low power consumption and small form factor, making it ideal for space-constrained builds. Additionally, it often features a built-in compass for heading information and a high update rate, contributing to stable and reliable flight performance. Features Powered by the latest 10th generation chip, enabling faster processing and improved performance with the ability to search and connect to 50+ satellites for enhanced accuracy. Integrated QMC5883L compass ensures precise orientation and stable directional tracking, improving navigation reliability. Upgraded to support 120 receiving channels, allowing the module to lock onto more satellites simultaneously for quicker positioning and stronger signal acquisition. Advanced five-mode positioning system provides highly stable and reliable connectivity, ensuring consistent performance even in challenging environments. Enhanced signal stability and anti-interference capability help maintain accurate location tracking, offering better protection and control during operation. Optimized for faster satellite lock time, reducing delays and improving overall efficiency in real-time applications.

Sunny Sky V2806 KV650 Brushless Motors Sunnysky V series of motors are specially designed to power long-endurance multirotor aircraft. Design styles of the whole series are high efficiency, stable structure, lightweight, high consistency, etc. These flat Sunny Sky V2806 motors are designed for long-flight time multi-rotors. These motors can produce enough torque at low RPM and work at peak efficiency during flight. The whole series uses Sunnysky’s patented Stepped and knurled design that not only efficiently prevents motors from getting loose, but also reduces the probability of malfunction and unstable output power. The whole series use original Japanese EZO bearings that provide quiet and stable flight in the air. With the guarantee of strength, the caps of V motors are highly hollow-cutted to save weight, so that these Sunny Sky V2806 motors can reach the maximum thrust-to-weight ratio and gain more flight time. Features: Delivers powerful performance with high output, enabling excellent speed and  agility for RC vehicles Built with high-quality materials and precision engineering for durability and long-lasting use Optimized for efficient operation, helping improve performance while extending flight time Designed for easy installation and compatibility with a wide range of RC setups Suitable for multiple applications including drones, multi-rotors, and fixed-wing aircraft Ensures smooth and stable control for better handling and precise flight maneuvers