Coreless Motor and Propeller(8x20mm)(Pack of 4)

The DIY Mini Wind Turbine Blade Set is a compact, vertical-axis wind turbine kit designed for educational, experimental, and small-scale renewable energy applications. Ideal for hobbyists, students, and engineers, this micro generator blade set enables hands-on learning about wind energy conversion and sustainable power generation. Each blade is precision-engineered for optimal aerodynamic efficiency at low wind speeds, making it perfect for indoor demonstrations or outdoor micro-generation setups. This set includes lightweight, durable blades compatible with most small DC generators and motors repurposed as generators. The vertical axis design ensures 360-degree wind capture, eliminating the need for yaw mechanisms and allowing operation from any wind direction. It's widely used in STEM education, science fairs, IoT energy harvesting prototypes, and off-grid sensor power systems. Easy to assemble and integrate, the kit supports experimentation with blade pitch, count, and generator coupling. Whether you're building a wind-powered charger, environmental monitoring station, or classroom demo, this turbine blade set offers a practical, low-cost entry into wind energy technology. Available for fast delivery across India.

Holybro Power Module PM02 The Holybro Power Module PM02 is a precision-engineered power module designed to supply clean, regulated voltage and current to your drone’s flight controller and onboard electronics. Built for reliability and accuracy, this module ensures your system receives stable power directly from the battery while continuously monitoring real-time voltage and current data. Its compact design and robust connectors make it ideal for a wide range of UAV platforms, from hobbyist builds to advanced autonomous drones. Engineered to integrate seamlessly with popular flight controllers, the PM02 power module not only simplifies wiring and installation but also enhances safety through over-current and over-voltage protection. Whether you’re building a custom multirotor, fixed-wing aircraft, or research UAV, this power module provides dependable energy management so you can focus on performance and flight control precision without compromise. Note: This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X (Requires a digital PM like PM02D). Features: High-quality power module designed to deliver stable and regulated power to drone flight controllers and onboard electronics. Provides real-time voltage and current sensing for accurate battery monitoring and improved flight safety. Ensures clean power output, reducing electrical noise and improving overall system reliability. Simplifies wiring and installation by combining power supply and monitoring in a single compact module. Built for compatibility with a wide range of drone flight controllers and UAV platforms. Ideal for multirotor, fixed-wing, and professional UAV applications requiring dependable power management.

Radiolink SE100 GPS Module with GPX Holder The Radiolink SE100 GPS Module with GPX Holder is designed to provide accurate positioning and stable navigation for RC drones and UAV platforms. With fast satellite acquisition and strong signal stability, it ensures reliable real-time location tracking for smooth and controlled flights. Featuring an integrated digital compass, the SE100 enhances directional accuracy for improved waypoint navigation, return-to-home functionality, and autonomous flight operations. The included GPX holder offers secure installation and helps reduce vibration interference, supporting consistent GPS performance. Compatible with Pixhawk flight controllers and Radiolink systems, the SE100 GPS module is an ideal solution for quadcopters, fixed-wing aircraft, and multi-rotor drones requiring dependable navigation support. Features: Delivers high positioning accuracy of approximately 50 cm and can detect up to 20 satellites within seconds in open areas. Equipped with a 2.5 dBi ceramic antenna that improves weak signal reception and minimizes interference through effective filtering. Powered by the u-blox UBX-M8030 (M8) 72-channel chipset with Infineon MMIC BGA715L7, offering superior performance compared to standard single GNSS 7N modules. Features a built-in high-precision QMC5883L electronic compass (I2C interface) based on technology similar to Honeywell HMC5983, supporting GPS, GLONASS L1OF, QZSS L1 C/A, and BeiDou B1 dual-mode positioning. Compatible with Radiolink Pixhawk flight controllers; compact size of 1.89 × 1.6 × 0.59 inches, ideal for DIY drones, quadcopters, multicopters, and RC vehicles.

Holybro Pixhawk 6C Flight Controller With PM02 Power Module and M9N GPS The Holybro Pixhawk 6C Flight Controller with PM02 Power Module and M9N GPS is an advanced pixhawk flight controller built to deliver reliable, precise control for a wide range of UAV platforms. Equipped with a high-performance processor and advanced sensors, this controller ensures stable flight dynamics, quick response times, and superior handling for multirotor, fixed-wing, and VTOL drones. Designed with both hobbyists and professional developers in mind, it supports popular open-source firmware and provides the flexibility needed for autonomous missions, research applications, and custom drone builds. This complete package includes a robust drone flight controller, the PM02 power module for clean and regulated energy supply with real-time current and voltage monitoring, and the high-precision GPS module with integrated compass for accurate positioning and navigation. Together, these components simplify setup, enhance flight reliability, and improve overall performance, making it an ideal choice for builders seeking a comprehensive flight system with dependable power management and precision location tracking. Features: High-performance pixhawk flight controller designed for fast processing and stable, accurate drone control. Includes PM02 power module for clean and regulated power delivery with real-time voltage and current monitoring. Comes with M9N GPS module and integrated compass for precise positioning and reliable navigation. Supports multirotor, fixed-wing, and VTOL drone platforms for versatile UAV applications. Compatible with popular open-source flight controller firmware for flexible customization. Simplified wiring and robust power management improve safety and overall system reliability.

Pludo STEM Kit Gyro Transmitter – Learns Inertia, Balance & Motion for Kids 11–14 | Grade 6–8 DIY Science Kit Dive into the world of motion and balance with the Pludo STEM Kit Gyro Transmitter, a fascinating science kit designed to make physics fun and hands-on. This interactive activity lets children explore the principles of inertia, motion, and gyroscopic balance by building their own gyro transmitter model. As students assemble and test the model, they learn that inertia is the tendency of an object to keep doing what it is already doing unless acted upon by an external force. When the gyro spins at high speed, it becomes stable and resists changes in direction. This spinning motion allows the gyro to stay upright and steady even when the transmitter is moved, clearly demonstrating how inertia helps spinning objects maintain balance and direction—a principle used in vehicles, navigation systems, and engineering applications. Blending creativity and experimentation, this science experiment kit helps students visualize how inertia affects movement and stability in real-world applications like vehicles and engineering systems. As part of Pludo’s advanced STEM kits, it provides an engaging, age-appropriate experience that bridges classroom concepts with practical understanding, making science both exciting and meaningful for young innovators. What Your Child Will Learn Learn how inertia keeps rotating objects stable even when forces act on them. Understand the principles of gyroscopic motion and how rotation affects balance and direction. Strengthen logical thinking, creativity, and problem-solving skills while building and testing the model. Observe real-world physics concepts in action, connecting theory to practical examples. Gain confidence by completing a functional project inspired by aerospace, robotics, and transportation systems. Educational Outcomes Inertia & Motion: Discover how objects resist changes in movement — a key concept in physics and engineering. Gyroscopic Balance: Learn how rotating systems maintain stability, used in everything from bicycles to spacecraft. Advanced STEM Skills: Develop analytical thinking, experimental reasoning, and hands-on engineering understanding. Real-World Applications: Connect classroom learning to robotics, drones, navigation systems, and automotive technology. Scientific Exploration: Encourage curiosity and deeper scientific thinking through guided experimentation. 💡 Did You Know? Gyroscopes are used in airplanes, spacecraft, and even smartphones to help them stay balanced and oriented — the same principle your child experiments with in this kit! Features Hands-on DIY science experiment kit exploring inertia, motion, and gyroscopic balance through a gyro transmitter activity. Encourages creativity, logical thinking, and problem-solving as kids build and test rotational stability. Made from durable, safe, high-quality materials for a reliable and enjoyable learning experience. Designed for ages 11–14 (Grade 6–8) with an age-appropriate introduction to advanced physics concepts. Promotes real-world understanding of inertia used in vehicles, robotics, aerospace systems, and navigation tools. Perfect for classroom demonstrations, science fairs, or home experiments, making physics interactive and exciting. Includes all necessary materials and a step-by-step instruction manual for guided assembly and exploration. Makes an excellent educational gift for birthdays, holidays, or STEM enthusiasts — inspiring curiosity and advanced scientific thinking.

Bambu Lab H2C Combo 3D Printer The Bambu Lab H2C Combo 3D Printer redefines high-performance multi-material 3D printing with precision, speed, and intelligence. Built on advanced Fused Deposition Modeling technology, it features a robust aluminum-steel chassis, fully enclosed chamber, and hardened steel extrusion system capable of handling demanding engineering materials. With support for printing up to seven materials in a single job—without purge waste—the H2C enables complex, integrated designs effortlessly. Its AI-driven monitoring, ultra-fine 50 µm motion accuracy, and automatic calibration ensure consistent, professional-grade results, making it ideal for industrial prototyping, advanced R&D, and professional manufacturing workflows. Purge Saving Multi-Material Printing Using the H2C, it is possible to print as many as seven distinct materials in one pass without needing to purge any nozzles. Merge various material characteristics into a single continuous form and elevate integrated design to an unprecedented level. Integrated TPU Joints for Multi-Color Parts Print durable TPU ball joints for your robot models flexible long-lasting and built for endless motion. Multi-Material Printing With Minimal Purge Waste In conventional single-nozzle multi-material printing, it is necessary to flush out any remnant material when switching filaments. Vortek revolutionizes this process by utilizing a smart hotend-swapping mechanism that substitutes the complete hotend, resulting in quicker, cleaner prints with reduced waste. Fully Automatic Filament Change and Always Delivering the Most Efficient Conversation The Vortek system integrates flawlessly with our dependable AMS (Automatic Material System), enabling the complete automation of the filament replacement procedure, eliminating the necessity for manual loading of each filament into the toolhead. Small Form Factor, More Filaments As only the hotend is exchanged, the setup can accommodate as many as six hotends which are not changeable without greatly decreasing the build capacity. This allows for an increased variety of materials, colors, and options, all within a single print. 8-Second Induction Heating and Contactless Design for Reliability Our top tier induction heating technology heats the nozzle within 8 seconds, greatly minimizing the preheating duration required for changing materials when compared to conventional techniques. Our strict criteria for dependability prompted us to shift from using metal pins that rely on contact, as they are susceptible to oxidation and inconsistent connections. We created a solution without physical contact that guarantees a consistent, high-frequency link, which is essential for accurate temperature management and synchronized intelligent hotend operation. Enclosed for High Performance Printing and Fully Automatic Nozzle Offset Calibration Featuring a continuous enclosure and a flexible air circulation system, the H2C ensures a consistent environment temperature for top quality materials while also purifying the air to create a tidy and secure workspace. Our calibration process for inductive nozzle offset is entirely automated, requiring no manual intervention, calibration plates, or additional setup. Within a matter of minutes, the H2C accurately adjusts the nozzle offset to a tolerance of 25 microns. Dedicated Hotends for Specific Filaments The Vortek system of the H2C allows you to assign one of its six swappable hotends to particular filaments, significantly transforming the use of important engineering substances. This guarantees enhanced reliability and uniformity in printed results. Additionally, each hotend can automatically remember filament data, allowing for an immediate pairing with the appropriate hotend when that same material is loaded again. Smooth Surface, Sharp Edges The H2C utilizes the servo motor within the extruder along with high-resolution eddy current sensors positioned at the nozzle to detect the dynamics of extrusion. This capability allows for accurate control of the extrusion process and the automatic adjustment of Pressure Advance (PA) settings for every filament, leading to smoother surfaces and more defined, sharper edges. Flexible Network Security & Connectivity The H2C provides easy access to cloud connections for controlling the device remotely from any gadget. For applications that require high security, it also offers comprehensive offline capabilities, guaranteeing total physical separation. Users can manage the printer, transfer files, and perform firmware updates without requiring internet access. For those with advanced skills, Developer Mode allows access to the MQTT port, enabling the integration of external components and software. Features: The H2C supports multi material printing for up to 7 different materials, allowing you to produce complex parts in a single run while completely eliminating the need for nozzle purging or creating material waste. The system is equipped with dual hardened steel nozzles capable of reaching 350 °C, which are specifically engineered for long term durability and the processing of high temperature engineering filaments. It features a fully enclosed heated chamber that maintains a steady 65 °C environment to effectively minimize warping and significantly improve layer adhesion for high performance materials. The high force PMSM servo extruder provides up to 10 kg of pushing power, delivering stable and high speed extrusion with 70% more force than traditional stepper motors. By utilizing a vision encoder that automatically compensates for mechanical drift, the printer achieves an ultra precise motion accuracy of 50 µm throughout the entire build. The AI powered print monitoring system uses a network of 59 intelligent sensors and a quad camera vision setup to detect potential printing errors in real time. The H2C features automatic nozzle offset and pressure advance calibration to ensure perfectly smooth surface finishes and consistently sharp edges on every part.

Sunny Sky EOLO 15x5.5 inch propellers- A Pair (Straight version) Sunny Sky EOLO 15×5.5 inch propellers are the perfect choice for drone enthusiasts seeking efficiency and durability in their flights. With a size of 15×5.5 inches, these propellers are tailor-made for quadcopters and multi-rotors, offering excellent lift and stability in the air. The propellers are designed to provide an optimal thrust-to-power ratio, ensuring you get the most out of your drone’s motors while also extending your battery life. Constructed from high-quality materials, these propellers can withstand the demands of frequent flights and are resistant to damage. They also contribute to smooth flights by reducing vibrations, resulting in more stable aerial maneuvers. Installing these propellers is a breeze, thanks to their standard mounting holes that fit most drones seamlessly. Upgrade your aerial experience with Sunny Sky EOLO 15×5.5 inch propellers today! Features: 15×5.5 inch size provides an ideal balance of lift and control, making it well-suited for quadcopters and multi-rotor drones, especially for carrying moderate payloads and maintaining stable flight Designed for high efficiency with an optimized thrust-to-power ratio, helping drones achieve better performance while conserving battery and extending flight time Built using high-quality and durable materials that offer excellent strength, ensuring resistance to wear, minor impacts, and long-term usage Precision-engineered blades minimize vibrations during operation, resulting in smoother flights, improved stability, and better control during aerial maneuvers Aerodynamic design enhances airflow and thrust generation, improving overall flight responsiveness and performance Easy to install with standard mounting holes, allowing quick and secure attachment to a wide range of compatible drone motors Provides consistent performance across different flying conditions, making it suitable for both beginners and experienced drone pilots

Sunny Sky EOLO 13×5 Inch Straight Version Drone Propellers – Pair The Sunny Sky EOLO 13×5 Inch Straight Version Drone Propellers – Pair are engineered to deliver high efficiency, durability, and stable flight performance for quadcopters and multi-rotor drones. With an exact size of 13×5 inches, these propellers provide an excellent balance between thrust and power consumption, ensuring optimal motor performance while helping extend battery life. The core function of these propellers is to generate consistent lift with minimal vibration, allowing smoother aerial maneuvers and improved flight stability. Built using high-quality, impact-resistant materials, they are designed to withstand frequent usage and demanding flying conditions. Additionally, the standard mounting design makes installation quick and compatible with most drone setups. If you are looking for reliable and high-performance Sunny Sky EOLO 13×5 inch drone propellers, this pair is an ideal upgrade for achieving efficient and stable flights. Features: Size: 13×5 inches - Perfect for quadcopters and multi-rotors, offering high lift and stability. Efficiency: Designed with an ideal thrust-to-power ratio to maximize flight performance and battery life. Durability: Made with high-quality materials for long-lasting performance and resistance to harm. Smooth Flight: Precise manufacturing lowers vibrations, resulting in smoother, more stable airborne maneuvers. Simple Installation: The standard mounting holes make it simple to install these propellers to your drone.

HGLRC ELRS 2.4G Receiver The HGLRC ELRS 2.4G Receiver is a compact and efficient communication module designed for use in remote-controlled devices such as FPV drones. Operating on the reliable 2.4GHz frequency, it delivers fast and stable signal transmission with low latency, ensuring precise control during flight. Its small size and lightweight design make it easy to integrate into various drone builds without adding extra weight or complexity. This receiver supports advanced features like telemetry, allowing real-time data such as signal strength and system status to be sent back to the transmitter for improved monitoring and control. Built for performance and reliability, it is ideal for FPV enthusiasts who require consistent connectivity, enhanced responsiveness, and better overall flight experience in both racing and freestyle applications. Features: Operates on the reliable 2.4GHz frequency, ensuring stable and interference-resistant communication for RC models Supports ELRS (ExpressLRS) protocol, providing long-range connectivity and efficient signal performance Compact and lightweight design allows easy installation without adding extra weight to the drone or aircraft Delivers ultra-low latency, enabling fast and precise control for better responsiveness during flight Suitable for FPV drones and RC aircraft, making it a versatile choice for both racing and recreational use Offers consistent signal strength for smooth and uninterrupted operation Designed for high performance in demanding flying conditions Enhances overall control experience with improved reliability and efficiency

Anycubic Photon P1 3D Printer The Anycubic Photon P1 is an advanced resin 3D printer engineered to deliver near-industrial precision with user-friendly operation. Featuring a high-resolution optical system with over 92% light uniformity, it ensures sharp details, smooth surfaces, and consistent curing across every layer. Its robust mechanical design, including a precision-ground steel build plate and dual-rail Z-axis system, provides exceptional stability and accuracy, making it ideal for professional-grade applications such as prototyping, dental modeling, and intricate design work. Designed for versatility and performance, the Photon P1 supports a wide range of resins, including high-viscosity industrial materials up to 8000 cps. It also introduces advanced technologies such as Wave Release for reduced peel force and a temperature-controlled resin vat for consistent printing even in challenging conditions. With optional dual-material and dual-color printing capability, it enables users to create complex models in a single print, significantly improving workflow efficiency and creative possibilities. Wave Release Technology Wave Release Technology is an advanced innovation designed to significantly improve the reliability and quality of resin 3D printing. It works by optimizing the layer separation process during printing, reducing the peel force required to detach each cured layer from the film. This reduction in force helps prevent common issues such as layer shifting, model deformation, or print failures, especially in complex or delicate designs. Precision-Fitted Industrial-Grade Ball Screw The precision-fitted industrial-grade ball screw enhances the printer’s Z-axis movement by delivering smooth, accurate, and highly stable vertical motion during the printing process. This high-quality component minimizes mechanical backlash and vibrations, ensuring consistent layer alignment and superior print accuracy even for intricate and detailed models. Its robust construction supports long-term durability and reliable performance, making it suitable for continuous industrial use. By maintaining precise positioning throughout each layer, it significantly improves surface finish and overall print quality, especially in high-resolution resin printing applications. Precision-Ground Steel Build Plate The precision-ground steel build plate is engineered to provide a perfectly flat and stable printing surface, ensuring excellent first-layer adhesion and consistent print quality. Its finely machined surface enhances grip for resin prints, reducing the chances of model detachment during the printing process. This high level of flatness and rigidity improves overall accuracy, especially for detailed and high-resolution prints. Built for durability, the steel construction withstands repeated use and maintains its precision over time, making it ideal for professional and industrial applications. Engineered for Ultra-Viscous 8000cps Resin Engineered to handle ultra-viscous resins up to 8000 cps, this feature allows the printer to work efficiently with thicker, high-performance materials that are typically challenging for standard resin printers. It ensures smooth and consistent resin flow, preventing issues like uneven curing or print defects. This capability expands material compatibility, enabling the use of specialized industrial resins for stronger, more durable, and functional prints. As a result, users can achieve higher-quality outputs with improved mechanical properties, making it ideal for advanced engineering, prototyping, and professional applications. Features: High-resolution resin printing with ultra-fine detail Dual-color and dual-material support (optional) LightTurbo 4.0 optical system for uniform curing Wave Release technology for improved reliability Supports high-viscosity industrial resins (up to 8000 cps) Temperature-controlled resin vat for stable performance Intelligent assistant for automated operation Strong and stable mechanical structure Ideal for dental, prototyping, and miniature printing.

RadioLink SE100 M10 GPS Module with High Positional Accuracy for Drones & UAVs The SE100 M10 GPS Module with High Positional Accuracy is a precision navigation sensor designed to provide reliable and accurate positioning data for drones, UAVs, robotics, and other GPS-enabled applications. Featuring advanced satellite signal processing and a compact form factor, this module ensures strong signal reception, fast satellite lock times, and stable performance even in challenging environments. Ideal for both hobbyists and professional developers, the SE100 M10 offers seamless integration with flight controllers and navigation systems, helping improve flight stability, waypoint tracking, and autonomous operation. Whether you’re building a custom drone, upgrading navigation accuracy, or enhancing your robotics project, this GPS module delivers dependable performance for enhanced control and situational awareness. Features: High positional accuracy GPS module for drones, UAVs, and robotics applications Powered by advanced M10 GNSS technology for improved satellite tracking Fast satellite acquisition with stable and reliable signal reception Compact and lightweight design for easy integration with flight controllers Supports precise navigation, waypoint tracking, and autonomous flight modes Suitable for hobby, research, and professional UAV projects

HGLRC SPECTER F460 Electronic Stack with 4-in-1 ESC The HGLRC SPECTER F460 Electronic Stack with 4-in-1 ESC is engineered to deliver high-performance flight control and efficient power management for FPV drone builds. Combining a flight controller with a 4-in-1 ESC, it provides seamless integration and precise motor control, ensuring smooth and responsive flight characteristics. Equipped with advanced gyroscopic sensors, the stack enhances stability and accuracy, making it ideal for high-speed racing and freestyle flying. Its compact form factor and robust construction allow easy installation while maintaining durability under demanding conditions, making it a reliable choice for both professional racers and hobbyists. Features: The flight control uses an exceptionally steady MPU6000 gyroscope. The flight control primary control chip uses the F405 chip, and the serial connection allows up to four groups, resulting in faster operation and smoother control. The primary chip of the ESC picks a new imported FD6288 processor, which is matched with ON3109 high-performance MOS, and can constantly sustain current and steady output. The socket allows for rapid connection to the camera, receiver, picture transmission, LED, or GPS without the need for welding. Maximum support for BEC 9V2A/BEC 5V2.5A, capable of providing reliable voltage and current output to external devices. The immersion gold high-tech design is temperature- and current-resistant, the ESC has a large pad, and the flight controller is directly plugged in, so there is no issue welding. The integrated 16M black box may record flight data. Onboard galvanometer module, real-time display of data, such as current feedback via the flight control

Radiolink TS100 V2.0 Mini GPS Module The Radiolink TS100 V2.0 Mini GPS Module is a compact and high-precision positioning solution designed for RC drones, UAVs, and autonomous flight systems. Built for reliable performance, this mini GPS module provides accurate real-time location tracking, ensuring improved navigation and enhanced flight safety. Integrated with a built-in digital compass, the TS100 V2.0 Mini GPS delivers precise directional data, enabling stable flight control, return-to-home functionality, waypoint navigation, and autopilot operations. Its optimized antenna design ensures faster satellite acquisition and strong signal stability, even in environments with potential interference. Designed for seamless compatibility with Pixhawk flight controllers and Radiolink transmitters, this lightweight GPS module is easy to install on quadcopters, fixed-wing aircraft, and multi-rotor platforms. The Radiolink TS100 V2.0 Mini GPS Module is an excellent choice for drone enthusiasts and professionals seeking dependable navigation performance in a compact form factor. Radiolink MINI M8N GPS TS100 Configuration: Equipped with u-blox UBX-M8030 (M8) GPS decoder chip with 72-channel reception capability. Integrated Infineon MMIC BGA715L7 power amplifier for enhanced signal performance. Delivers better accuracy and stability compared to standard single GNSS 7N modules. Supports simultaneous dual GNSS operation for improved positioning reliability. Compatible with GPS/QZSS L1 C/A, GLONASS L1OF, and BeiDou B1 signals. Supports SBAS L1 C/A systems including WAAS, EGNOS, and MSAS. Built-in QMC5883L geomagnetic sensor based on similar technology to Honeywell HMC5983. Features 2.5 dBi high-gain ceramic antenna for strong signal reception. Includes Murata Surface Acoustic Wave Filter (SAWF) for improved signal filtering. Designed for stable performance with strong anti-interference capability. Features: Supermini Size – Compact and lightweight design ideal for small drone and UAV builds. Excellent Performance – Provides fast satellite lock with stable and accurate positioning. Worry-free Practice – Ensures reliable GPS tracking for safe and confident flight operations.

HGLRC M100 MINI GPS The HGLRC M100 MINI GPS is a compact and high-performance positioning module designed to deliver fast and precise location tracking for FPV drones. Powered by the latest 10th-generation UBLOX chip, it ensures quick satellite acquisition and accurate positioning, enhancing overall flight reliability. Its ultra-compact 15×15mm size makes it ideal for a wide range of drone builds, especially 2–7 inch quadcopters where space and weight are critical factors. Equipped with a high-quality ceramic antenna and an externally optimized PCB design, the M100 MINI GPS offers improved signal reception, allowing it to lock onto satellites efficiently even in challenging environments. It supports multiple global navigation systems including GPS, Galileo, and BDS, ensuring faster and more reliable positioning across different regions. Additionally, the onboard LED indicators, including power and PPS (positioning) indicators, provide clear real-time status updates, making it easy for users to monitor the GPS performance during operation. Features: Powered by a 10th generation chip for fast and precise positioning performance Compact design, making it suitable for 2–7 inch drones available in the market Features a high-quality ceramic antenna with an optimized PCB layout for improved satellite signal reception Supports GPS, Galileo, and BDS for multi-mode positioning and quick location tracking in any environment Equipped with onboard POWER and PPS LED indicators for clear and easy status monitoring.

Pludo STEM Air Glide Kit – DIY Science Kit for Kids 11–14 | Grade 6–8 Bernoulli’s Principle Air Levitation Experiment Bring the wonders of physics to life with the Pludo STEM Air Glide Kit, a hands-on science experiment kit designed to demonstrate Bernoulli’s Principle in action. As children assemble and experiment with the kit, they discover that fast-moving air creates low pressure. When the blower pushes air upward at high speed, the air pressure around the ball becomes lower than the pressure below it. This pressure difference lifts the ball and keeps it floating and balanced in the air. As long as the airflow remains steady, the ball stays levitated, clearly showing how air speed and pressure work together to produce lift. This engaging kit doubles as both a science toy and a STEM learning tool, helping young minds understand core concepts of motion, balance, and aerodynamics in a fun and interactive way. A great choice for parents and teachers seeking quality kids learning toys and STEM kits that inspire creativity and experimentation. What Your Child Will Learn: Discover how air pressure and velocity work together to create lift. Understand Bernoulli’s Principle through exciting real-world demonstrations. Learn about aerodynamics, balance, and fluid motion in a simple, interactive way. Strengthen observation, critical thinking, and problem-solving skills. Gain confidence through hands-on learning and self-exploration. Educational Outcomes: Conceptual Clarity: Builds a solid understanding of how air movement affects objects, connecting science to daily life. STEM Skill Development: Encourages experimentation, hypothesis testing, and logical reasoning. Real-World Application: Demonstrates how Bernoulli’s Principle applies to airplanes, drones, and sports physics. Creative Thinking: Inspires kids to design and test their own experiments based on air pressure and motion. Confidence in Learning: Promotes curiosity-driven discovery that helps children approach science with enthusiasm and confidence. Fun Fact: Bernoulli’s Principle is the same concept that keeps airplanes in the sky — your child will explore this fascinating science right at home! Features Hands-on DIY science experiment kit that demonstrates Bernoulli’s Principle through air pressure and lift experiments. Encourages curiosity, critical thinking, and problem-solving as children explore how airflow creates levitation. Made from durable, child-safe materials ensuring safe and long-lasting use during experiments. Suitable for children aged 11–14 (Grade 6–8) for an engaging and age-appropriate STEM learning experience. Promotes understanding of aerodynamics, balance, and fluid motion through fun, practical experiments. Perfect for classroom demonstrations, home learning sessions, or interactive STEM projects. Included manual provides step-by-step guidance for easy assembly and scientific exploration. Makes a thoughtful science gift for birthdays, science fairs, or young inventors interested in hands-on discovery.