Arduino LilyPad ATmega328P compatible Board

XL4015 5A Constant Current/Voltage LED Drives Lithium Battery Charging Module This versatile Buck converter serves as a standard step-down module equipped with overcurrent protection for a variety of applications. It functions as a charging device for lithium, nickel-cadmium, and nickel-hydrogen batteries, as well as battery packs, solar panels, wind turbines, and as a high-power LED driver module. The buck converter offers two modes, constant voltage and constant current, with corresponding indicators to display the current mode. In lithium battery charging mode, the float voltage and charge current can be adjusted to indicate charging or full charge status. Additionally, the module features current limiting protection, ensuring that it will not suffer damage in the event of a short circuit. This linear module has constant voltage and constant current function (CC CV). and it has a good performance. When you use it as a charger. this module use good chip as core and it is stable. also its ripple is low to 50mV. Features Short circuit protection: Yes(limited current 8A) Over-temperature protection: Yes (automatically turn off the output after over temperature) Input reverse connection protection: None, (If necessary, please input a large current diode in the input string) Installation method: 4 3mm silk Wiring method: terminal block or soldering terminal, V-IN is input. Applications: LCD Monitor and LCD TV Portable instrument power supply Telecom / Networking Equipment

Female to Female Jumper Wires (20cm) 40pcs These are 20cm 40pcs Female to Female Jumper wires, very Flexible and easily detachable. These jumper cables have 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly Dupont cables are useful with Orange Pi, Banana Pi, Raspberry Pi , Arduino , and other mini PCs and development boards . It is very useful in the PCB project, PC motherboard, as well as Breadboard connections. Additionally, these jumper wires allows you to plug and unplug easily for prototyping and can be used over and over again. Check out the best selection of Jumper Wires . Applications: Raspberry Pi Arduino PCB projects Breadboard connections Get a complete set of M2M, M2F, F2F Jumper Wires Set for DIY projects.

A3967 Stepper Motor Driver This A3967 Stepper Motor Driver For Arduino is the most recent version of EasyDriver v44, which was created in collaboration with Brian Schmalz. When compared to previous versions, it offers more flexibility and control over your stepper motor . It is a simple stepper motor driver that is compatible with most microcontrollers and capable of producing a digital 0 to 5V pulse (0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). A 7V to 30V power supply is required for the module's motor. The digital interface is powered by an onboard voltage regulator that can be set to 5V or 3.3V. The A3967 is a full-featured microstepping motor driver with an integrated transistor. It is intended for use with bipolar stepper motors in full-, half-, quarter-, and eighth-step modes, with output drive capabilities of 30 V and 750 mA. The A3967 comes with a fixed off-time current regulator that can operate in slow, fast, or mixed current-decay modes. This current-decay control scheme produces less audible motor noise, higher step accuracy, and lower power dissipation. The transistor is essential to the A3967's simple implementation. Simply sending one pulse to the STEP input causes the motor to move one step (full, half, quarter, or eighth depending on two logic inputs). It is not necessary to programme phase-sequence tables, high-frequency control lines, or complex interfaces. The A3967 interface is ideal for applications where a complex P is either unavailable or overburdened. Features: A3967 microstepping driver Adjustable current control from 150mA/phase to 750mA/phase MS1 and MS2 pins are broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth) Compatible with 4, 6, and 8-wire stepper motors of any voltage Breadboard-compatible pins.

CNC Shield for Arduino The CNC shield for Arduino has total four slots, can drive 4 A4988 stepper motors. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. The CNC Shield V3.0 allows you to build a engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. There are 4 slots on the board for plugging in stepper motor drive module which can drive 1 stepper motor each. Controlling each step stepper motor requires only two IO pins on the Arduino. Just insert this Arduino CNC Shield V3.0 onto an Arduino UNO , and install the GRBL firmware, you can then quickly build a DIY CNC engraving machine. This arduino shield is very convenient to use and is suitable for development boards compatible with Arduino. This CNC shield compatible with Arduino is the latest version of the CN shield model (V 3.0). The CNC Shield is GRBL 0.9 compatible and with the help of jumper wires , it is accessible to stepper drivers. Features: Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)

CNC Shield + UNO R3 Board compatible with Arduino + 4xDRV8825 Driver Kit Arduino Uno is an open-source microcontroller used by students and hobbyists entering the world of DIY electronics and automation, The Arduino Uno can be used for any application including being the brains of your next DIY 3D printer and/or CNC router The CNC Shield V3.0 allows you to build an engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. Along with that, the CNC shield allows you to control up to four stepper motors by mounting on 4 stepper motor drivers, included with this kit The DRV8825 provides an integrated motor driver solution for printers, scanners, and other automated equipment. The device has two H-bridge and is intended to drive a bipolar stepper motor. Features: UNO R3 Board: The main microcontroller board compatible with Arduino. CNC Shield: An expansion board that allows for easy connection and control of stepper motors. 4x DRV8825 Stepper Motor Drivers: High-performance drivers for controlling stepper motors. Micro-Stepping: Supports micro-stepping settings for precise control of stepper motors. GRBL Compatibility: Compatible with GRBL firmware, which is widely used for CNC control. Voltage Range: Operates on 12-36V DC. Heat Sinks: Included for cooling the stepper motor drivers. USB Cable: For connecting the UNO R3 board to a computer. 40-Pin Row Needles: For additional connections. Applications: CNC Machines: Used for controlling stepper motors in CNC milling, engraving, and cutting machines. 3D Printers: Essential for driving stepper motors in 3D printers, ensuring precise layer deposition and movement. Laser Cutters: Controls stepper motors in laser cutting machines for accurate cutting and engraving. Robotics: Ideal for robotics projects requiring precise motor control, such as robotic arms and automated guided vehicles (AGVs). X-Y Tables: Used in X-Y tables for accurate positioning and movement in various industrial applications. Pick-and-Place Devices: Employed in pick-and-place machines for accurate component placement in electronics manufacturing. Labeling Machines: Used in labeling machines for precise label application. Pinout Diagram for the Arduino Uno Microcontroller Applications of the Kit The kit can be used to create custom 3D printers, scanner, CNC mills and other automated equipment applications

Cytron SHIELD-MD10 – 10A 7V–30V DC Motor Driver Shield for Arduino The Cytron SHIELD-MD10 is a high-performance 10A DC motor driver shield designed for Arduino and compatible development boards. Built specifically for brushed DC motors, it supports 7V–30V motor voltage and delivers up to 10A continuous current, making it ideal for robotics, automation, RC systems, DIY machines, and educational electronics. With solid-state MOSFETs and a fully NMOS H-Bridge design, the Cytron SHIELD-MD10 ensures efficient, fast, and reliable motor control without the need for a heatsink, helping creators achieve accurate speed and direction control with minimal wiring. Optimized for maximum compatibility, the shield stacks directly onto popular boards like Arduino UNO R3, Arduino Mega 2560, Maker UNO, Maker UNO Plus, Arduino Leonardo, CT-UNO, and CT-ARM. Featuring selectable digital pins for PWM and DIR, stackable headers, and regenerative braking, the Cytron SHIELD-MD10 offers unmatched flexibility for robotics and mechatronics projects. Whether you're building a DIY robot, conveyor system, or motorized prototype, this durable and high-current driver shield delivers smooth performance and long-lasting reliability. Features: Bi-directional control for one brushed DC motor with smooth speed and direction adjustment. Supports motor voltage from 7V–25V (Rev 1.0) and 7V–30V (Rev 2.0). Delivers 10A continuous and 15A peak current for high-torque applications. Uses fully solid-state components with NMOS H-Bridge for high efficiency. No heatsink required thanks to low-loss MOSFET design. Supports both 3.3V and 5V logic inputs, making it compatible with multiple controllers. Regenerative braking for safe and controlled stopping. Stackable pin headers allow adding more Arduino shields. Selectable digital pins for PWM and direction via jumpers. PWM frequency supported up to 10 kHz for fine speed control.

7Semi SHT45 and SGP41 Environmental Sensor Breakout The 7Semi SHT45 and SGP41 Environmental Sensor Breakout is a versatile environmental sensor module designed for accurate and simultaneous measurement of temperature, humidity, and air quality. By combining high-precision SHT45 sensing with the advanced SGP41 air quality sensor on one compact board, it simplifies environmental monitoring for a wide range of projects. Whether you’re building smart home systems, indoor air quality stations, or industrial monitoring tools, this sensor package provides reliable real-time data where it matters most. Offering stable performance with easy digital communication interfaces, this breakout is ideal for both beginners and advanced makers. Its compatibility with popular microcontrollers and development platforms makes integration seamless for IoT applications, HVAC control, weather stations, and wellness monitoring systems. Students, hobbyists, and professionals alike will appreciate the module’s precision, low power use, and plug-and-play ease for projects requiring dependable environmental sensing. Features: SHT45 High accuracy with ±1.0% RH and ±0.1°C temperature precision Built on advanced CMOSens technology for improved accuracy and low power use Optimized for standard SMD assembly, suitable for high-volume production SGP41 Digital VOC sensor designed for indoor air quality monitoring Patented CMOSens technology with temperature-controlled micro-hotplate I²C interface for easy integration with microcontrollers Humidity compensation for accurate air quality readings Compatible with VOC algorithms for immediate IAQ evaluation

DFRobot Gravity 7/24 Industrial Analog pH Sensor Meter Kit for Arduino The DFRobot Gravity 7/24 Industrial Analog pH Sensor Meter Kit for Arduino is a high-precision Analog pH Sensor designed for professional and industrial applications requiring continuous pH monitoring. This Arduino pH Sensor uses an industrial-grade glass membrane electrode with low impedance, delivering fast response, excellent thermal stability, and stable performance over long periods. It supports a full measurement range of 0 pH to 14 pH with linear voltage output, ensuring accurate and reliable readings. The sensor integrates easily through a BNC connector and PH2.0 interface, allowing direct connection to any Arduino analog input. Its reference system, based on Ag/AgCl gel electrolyte with a PTFE membrane, provides strong anti-pollution characteristics and prevents clogging, making it an ideal industrial pH sensor for Arduino for water treatment systems, environmental monitoring, and laboratory analysis. Attention: The probe's bottle top contains protective fluids (3.3mol/L KCL). Even if the bottle cap is tightly fastened, some protective liquid may leak around it, resulting in white crystals. However, as long as the bottle top contains protective liquid, the probe's life and accuracy will be unaffected. Please use it with confidence. It is recommended that the white crystals be returned to the bottle cap's protective liquid. Features Industrial-grade Analog pH Sensor for accurate measurement Compatible with Arduino and other microcontrollers Measures pH range from 0 to 14 Fast response with high stability BNC connector for secure sensor connection Plug-and-play PH2.0 analog interface Built-in power indicator LED Suitable for long-term online monitoring Low maintenance and long sensor life Ideal for water quality and lab applications Applications Water Quality Surveillance Aquaculture

7Semi SHT41 Temperature & Humidity Sensor Breakout with I2C Qwiic Interface The 7Semi SHT41 Temperature & Humidity Sensor Breakout is a high-precision humidity sensor module built for engineers, developers, and IoT creators who need reliable environmental data in compact embedded systems. Powered by Sensirion’s advanced CMOSens® technology, this I2C temperature sensor delivers accurate readings across a wide range, making it ideal for smart home automation, HVAC upgrades, weather stations, and industrial monitoring systems. With its accurate ±1.5% RH humidity and ±0.2°C temperature performance, it ensures consistent measurements even in demanding environments. Designed with a built-in Qwiic connector, the breakout allows fast, solder-free plug-and-play integration into Qwiic-compatible ecosystems like Arduino, Raspberry Pi, and other development platforms. Its quick response time, low power consumption, and compact 30 × 22 mm footprint make it a dependable environmental monitoring sensor for portable, battery-powered devices, IoT prototypes, and educational projects. Whether used in climate control systems or air-quality tracking, the SHT41 provides robust, long-term stability. Features: Designed with Sensirion’s CMOSens® technology to deliver high-accuracy temperature and humidity readings with long-term stability. Offers a full 0–100% RH humidity range and a wide temperature range of -40°C to 125°C, making it suitable for varied climates and applications. Integrated Qwiic connector provides seamless, solder-free connectivity for rapid prototyping and easy hardware integration. Supports I2C communication, allowing compatibility with Arduino, Raspberry Pi, ESP32, and other development platforms. Features a compact and lightweight 30 × 22 mm PCB, ideal for embedded and space-constrained designs. Operates on 3.3V–5V supply with low operating current, making it suitable for battery-powered and energy-efficient systems.

Cytron Maker Reflect IR Reflectance Sensor for Beginner The Cytron Maker Reflect IR Reflectance Sensor is a compact and beginner-friendly module designed to help learners understand how infrared reflectance works in robotics and automation. Using an IR LED and a high-sensitivity phototransistor, it measures how much IR light bounces back from a surface and generates an analog voltage that’s easy for any microcontroller to read. This makes it perfect for exploring concepts like surface detection, black-and-white line following, and reflectivity measurement. Designed by Cytron with simplicity in mind, this sensor is ideal for kids, students, and makers stepping into DIY robotics projects. Its ultra-small size and centered mounting hole allow it to fit even in tight robot designs, while its 3.3V and 5V compatibility ensures smooth use with Arduino, Raspberry Pi, and all common controllers. Whether you're building a line follower, Sumo bot, maze robot, or encoder-based mechanism, the Maker Reflect delivers reliable IR performance with minimal setup. Features: Works as a hands-on IR reflectance sensor that uses an IR LED + phototransistor to measure surface reflectivity for reliable detection. Helps beginners learn analog sensing, line detection, object presence, and robot navigation, building strong STEM fundamentals. Built with safe, durable Cytron components, ensuring stable performance even in beginner-level DIY robotics projects. Fully compatible with 3.3V and 5V systems, making it easy to interface with Arduino, Raspberry Pi, microcontrollers, and robotics platforms. Offers a sensing distance of 1mm to 40mm at 5V (ideal for black/white surface detection and line following). Provides analog voltage output, allowing smooth interpretation of different surface colors and reflectivity. Compact size of 18.1mm × 8.4mm × 4.2mm, with a centered mounting hole for accurate positioning at the front of robots. Suitable for school projects, robotics clubs, and maker experiments - perfect for line followers, Sumo robots, maze solvers, and encoder wheels. Makes a great STEM learning gift for young robotics enthusiasts and beginners exploring IR sensors.

7Semi SHT45 Humidity & Temperature Sensor Breakout Board with 4-Pin Connector Get reliable and highly precise environmental readings with the 7Semi SHT45 Humidity & Temperature Sensor Breakout, engineered for applications where accuracy truly matters. Built on Sensirion’s advanced SHT45 platform, this compact module delivers outstanding measurement performance with ±1.0% RH humidity accuracy and ±0.1°C temperature accuracy. Whether you're developing an HVAC controller, creating a weather-monitoring setup, or designing a smart agriculture system, this breakout ensures stable, real-time data you can trust. Designed with a 4-pin JST connector and I2C communication, the sensor integrates effortlessly into microcontroller projects using platforms such as Arduino, ESP32, or Raspberry Pi. The ultra-low power consumption and wide operating voltage range make it ideal for both portable and embedded IoT devices. Its fast response time and factory-calibrated output allow creators, engineers, and automation designers to build systems that depend on precise climate data without additional tuning. This makes it an excellent choice for environmental monitoring, industrial automation, and smart home development. Features: Provides exceptionally accurate measurements with ±1.0% RH humidity accuracy and ±0.1°C temperature accuracy for reliable environmental tracking. Covers a wide operating range of 0–100% RH and -40°C to 125°C, making it suitable for diverse climates and industrial environments. Delivers fast response times, ensuring timely humidity and temperature updates for real-time applications. Designed with ultra-low power CMOSens® technology, making it ideal for long-duration, battery-powered systems. Offers seamless integration through its I2C interface and 4-pin JST connector, enabling quick and secure connectivity with most MCUs. Operates efficiently across a supply voltage range of 1.08V to 3.6V, enhancing compatibility across different devices. Comes factory-calibrated with a certification, ensuring immediate plug-and-play accuracy without additional configuration.

Cytron UNO – Arduino UNO Compatible Board with USB Micro-B The Cytron UNO is a fully Arduino UNO compatible development board built with the reliable ATmega328P microcontroller, making it ideal for beginners, students, hobbyists, and electronics enthusiasts. Designed to offer the same functionality as the Arduino UNO R3, the Cytron UNO includes 14 digital I/O pins, 6 PWM outputs, 6 analog inputs, UART, SPI, I2C, and full R3 shield compatibility. With USB Micro-B connectivity, you can easily program the board using the same cable used for Android phones and power banks - making it more convenient and cost-friendly for modern makers. Cytron further enhances the board with a stronger onboard voltage regulator, improved power handling, and repositioned LEDs on the edge for better visibility, even when a shield is attached. The CT-UNO also includes extra standard pads for custom shields, an FTDI-based USB interface for stable programming, and robust DC input support from 7V to 15V. Whether you’re building IoT prototypes, robotics, embedded systems, or learning coding fundamentals, the Cytron UNO delivers reliability, ease of use, and full compatibility with the entire Arduino ecosystem. Features Powered by SMD ATmega328P with Optiboot (UNO R3) bootloader for fast programming. USB programming enabled by stable FTDI FT231X chip for improved reliability. Supports DC 7–15V input with upgraded onboard voltage regulator for higher output current. Offers 14 digital I/O pins, including 6 PWM outputs, and 6 analog inputs for versatile projects. Fully Arduino UNO R3 shield compatible with ISP header and broken-out SDA, SCL, IOREF pins. Uses USB Micro-B socket, compatible with standard Android phone cables. LEDs relocated to board edge for clear visibility during development. Includes additional 2.54mm pads for creating custom shields. White PCB design with clean layout and Cytron build quality. Dimensions

7Semi I2C BME680 Sensor Probe Powered by Bosch Sensortec BME680 Sensor The 7Semi BME680 Environmental Sensor Probe is a compact and rugged sensing module designed for high-accuracy air quality monitoring in demanding indoor and industrial environments. Built around the Bosch BME680 multisensor chip, it delivers precise temperature, humidity, barometric pressure, and VOC gas readings over a reliable I2C interface. With its fully calibrated output and fast response time, this probe is ideal for engineers and system designers building smart HVAC controls, home automation setups, or environmental monitoring equipment. Encased in a breathable, chemically resistant plastic shell, the BME680 probe ensures long-term stability even when exposed to dust, high humidity, or harsh atmospheric conditions. The integrated 1-meter cable with a Mini Round Shell connector makes installation easy across ducts, walls, chambers, and compact enclosures. Its low power consumption and wide operating range make it a dependable choice for air quality monitoring projects, IoT systems, and precision sensor applications. Features: Offers 4-in-1 environmental sensing, providing temperature, humidity, barometric pressure, and VOC gas measurements in a compact and efficient module. Utilizes the Bosch BME680 sensor for high accuracy and fast response across a wide range of environmental conditions. Enclosed in a breathable, durable plastic housing that protects the sensor from dust, chemicals, and environmental wear while ensuring excellent air permeability. Supports I2C digital communication for seamless integration with microcontrollers and embedded systems. Includes a 1-meter cable with a Mini Round Shell Plastic connector, enabling flexible installation in tight or industrial spaces. Operates on low voltage (1.71V to 3.6V), making it ideal for energy-efficient and battery-powered applications. Fully factory-calibrated sensor output eliminates the need for manual tuning or recalibration. Designed for reliable performance in pipes, ducts, walls, HVAC units, greenhouses, and high-humidity environments.

SmartElex Micro ISM330DHCX 6DoF IMU Sensor The SmartElex Micro ISM330DHCX 6DoF IMU Sensor is a compact motion-sensing module that combines an accelerometer and gyroscope to measure movement, orientation, and rotation. It helps users track motion data accurately in three-dimensional space, making it useful for students, hobbyists, engineers, and educators working on robotics, automation, and motion-based electronics. This IMU breakout board simplifies motion tracking in projects where stability, responsiveness, and precision are important, without requiring complex circuit design or calibration setups. This 6DoF IMU sensor is commonly used in self-balancing robots, gesture-controlled systems, IoT wearables, drones, and embedded automation projects that rely on movement or orientation feedback. It integrates smoothly with popular development platforms like Arduino, Raspberry Pi, and ESP32, making setup and data processing beginner-friendly and efficient. With dependable performance and straightforward compatibility, the SmartElex Micro ISM330DHCX is a practical choice for prototyping, academic learning, and product development where reliable motion tracking and sensor fusion are essential. Features: 6DoF IMU with built-in accelerometer and gyroscope for motion tracking Measures linear acceleration and rotational movement in real time Compact breakout board designed for easy integration in projects Compatible with Arduino, Raspberry Pi, ESP32, and similar platforms Ideal for robotics, drones, wearables, and gesture-based control systems Reliable module for prototyping, STEM learning, and embedded development

Cytron Maker UNO X – Arduino Compatible Development Board for Classroom The Cytron Maker UNO X is a beginner-friendly, classroom-ready Arduino-compatible development board designed to simplify STEM education. Equipped with built-in LEDs on every digital pin, a programmable push button, a piezo buzzer, and a powerbank-friendly design, it eliminates messy wiring and allows students to start coding instantly. This board is ideal for Arduino beginners, school STEM labs, coding clubs, training centers, and anyone learning microcontroller basics. With plug-and-play functionality and seamless compatibility with Arduino IDE, it delivers a smooth learning experience for educators and students alike. Created with the needs of teachers in mind, the Cytron Maker UNO X features an onboard half-size breadboard and perfboard for quick prototyping, making it easy to build hands-on electronics projects right out of the box. Powered by the ATmega328P, and complete with essential interfaces like UART, SPI, I2C, PWM pins, and analog inputs, this board is perfect for exploring coding, electronics, and robotics in a structured classroom setup. Whether for STEM workshops, school projects, or Arduino training programs, Maker UNO X provides an engaging, frustration-free learning experience. Features: Fully Arduino UNO-compatible board designed specially for classrooms and STEM beginners. Built-in LED indicators on every digital pin, allowing students to visualize code output instantly without wiring. Includes piezo buzzer, programmable push button, and powerbank-friendly operation for portable projects. Comes with an onboard perfboard prototyping area and a half-size breadboard to simplify hands-on experiments. Powered by the reliable ATmega328P microcontroller with 16MHz clock speed and full support in Arduino IDE. Offers 20 digital I/O pins, 6 PWM pins, 6 analog inputs, and communication interfaces (UART, SPI, I2C). Features 32KB Flash, 2KB SRAM, 1KB EEPROM, making it ideal for beginner programming and small-scale electronics projects. Uses a USB Micro-B interface with CH9340 USB-UART chip (note: not supported on Windows 7). Designed by Cytron to support educators - ensures faster learning with fewer wiring issues and more hands-on coding.