12V 0.18A CPU Cooling Fan

Cooling Fan DC 12V 3010 for 3D Printer The 12V 3010 Cooling Fan for 3D Printer is Small but powerful exhaust cooling is designed for the 3D printer . It has two pin connector to connect in a printer controller. DC Fan operates at 12V supply and operates automatically by the Printer controller system. It is used to mount on extruders to maintain the temperature of an extruder for seamless printing. This mini fan has the ability to run at a speed of 6800 ~ 13000 rpm. The body of the fan is built from a combination of resin and plastic material. The combination provides strength and insulation to the fan. Due to its manufacturing, It is light in weight and strong enough to bear some falls on the ground. So if you are looking for a perfect combination of strength and insulation in a single fan, then you are in the right place. Note : Image Shown may differ from actual product in term of the brand name. Features: Good airflow Noiseless Performance Very low Current consumption Easy to install and connect.

The DIY Mini Wind Turbine Blade Set is a compact, vertical-axis wind turbine kit designed for educational, experimental, and small-scale renewable energy applications. Ideal for hobbyists, students, and engineers, this micro generator blade set enables hands-on learning about wind energy conversion and sustainable power generation. Each blade is precision-engineered for optimal aerodynamic efficiency at low wind speeds, making it perfect for indoor demonstrations or outdoor micro-generation setups. This set includes lightweight, durable blades compatible with most small DC generators and motors repurposed as generators. The vertical axis design ensures 360-degree wind capture, eliminating the need for yaw mechanisms and allowing operation from any wind direction. It's widely used in STEM education, science fairs, IoT energy harvesting prototypes, and off-grid sensor power systems. Easy to assemble and integrate, the kit supports experimentation with blade pitch, count, and generator coupling. Whether you're building a wind-powered charger, environmental monitoring station, or classroom demo, this turbine blade set offers a practical, low-cost entry into wind energy technology. Available for fast delivery across India.

CNC Shield for Arduino The CNC shield for Arduino has total four slots, can drive 4 A4988 stepper motors. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. The CNC Shield V3.0 allows you to build a engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. There are 4 slots on the board for plugging in stepper motor drive module which can drive 1 stepper motor each. Controlling each step stepper motor requires only two IO pins on the Arduino. Just insert this Arduino CNC Shield V3.0 onto an Arduino UNO , and install the GRBL firmware, you can then quickly build a DIY CNC engraving machine. This arduino shield is very convenient to use and is suitable for development boards compatible with Arduino. This CNC shield compatible with Arduino is the latest version of the CN shield model (V 3.0). The CNC Shield is GRBL 0.9 compatible and with the help of jumper wires , it is accessible to stepper drivers. Features: Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)

Creality CR-Scan Otter 3D Scanner The Creality CR-Scan Otter 3D Scanner is a desktop scanning solution designed to capture accurate 3D models of real-world objects with minimal setup. It helps users convert physical items into digital files that can be used for 3D printing, design edits, and virtual prototyping. Built for students, makers, hobbyists, educators, engineers, and small businesses, it removes the complexity often associated with 3D scanning by offering a straightforward workflow that requires no extensive calibration or professional knowledge to get started. This 3D scanner is well suited for rapid prototyping, reverse engineering, digital archiving, product customization, and creative design work. It integrates efficiently with common modeling and slicing software, enabling users to process scan data and prepare it for tasks like 3D printing, product development, robotic simulations, and digital fabrication. With dependable tracking and strong detail capture, the Creality CR-Scan Otter is a practical and reliable choice for classrooms, maker labs, personal studios, and early-stage product development environments seeking an accessible approach to 3D scanning. Various Size Options Innovative Four-lens Stereo Vision Proficient in handling both large and small scans. Two sets of dual lenses, catering to details and various sizes； A set of long-focal dual lenses for scanning small objects, providing richer details; a set of short-focal dual lenses for scanning large objects, covering a wider range of sizes. Capture SMALL & BIG Objects The CR-Scan Otter realizes possibilities of scanning various objects, ranging in size from 10*10*10mm to 2000*2000*2000mm, from tiny coins to large vehicles, all covered in one scanner. The scanning distances range from 110mm³ to 1200mm³ to effectively capture items of versatile sizes. Ultra-High Precision, Rich in Detail Otter adopts the state-of-the-art structure-light stereo-matching algorithm and optical design to faithfully reproduce the authentic texture and contours of objects. The scanning precision up to 0.02mm ensures every detail is sharp and clear. Elevate Scanning Experience Ring indicator lights provide real-time scanning status; CR-Scan Otter comes with touch buttons and audible feedback, making scanning seamless. It allows for real-time exposure adjustment and offers comfortable and simple operation. Features: User-friendly 3D scanner designed for beginners and professionals alike Captures detailed and accurate 3D models with consistent tracking performance No complex calibration required, enabling fast and hassle-free setup Supports scanning of small to medium-sized objects with smooth surface reconstruction Exports models compatible with common CAD, 3D printing, and digital design software Ideal for prototyping, reverse engineering, product customization, and education Works well for creative studios, maker spaces, classroom labs, and hobby workshops Reliable choice for building digital assets for 3D printing, simulation, or visualization

7Semi MAX31855 K-Type Thermocouple Amplifier Breakout The 7Semi MAX31855 Thermocouple Amplifier Breakout is designed for creators, engineers, and industrial users who need reliable and highly accurate temperature readings from extreme environments. With its advanced MAX31855 converter IC, this breakout allows effortless digital temperature measurement using K-type thermocouples, making it a powerful choice for applications like 3D printing, HVAC monitoring, and high-heat industrial systems. The onboard cold-junction compensation ensures precision by automatically correcting any thermal offsets at the connector. Supporting temperatures from -270°C to +1372°C, it delivers 14-bit resolution with smooth 0.25°C read steps, providing dependable, noise-free readings for sensitive processes. Built-in fault detection helps identify open circuits or shorts, making the system easier to troubleshoot and safer for continuous operation. With its SPI-based digital interface and compatibility with 3.3V/5V logic microcontrollers, the module integrates cleanly with Arduino, ESP32, Raspberry Pi, and industrial controllers. Features: Supports a wide thermocouple measurement range from –270°C to +1372°C, making it suitable for extreme heat and cryogenic applications. Provides 14-bit high-resolution output with precise 0.25°C increments for accurate temperature monitoring. Includes built-in cold-junction compensation, ensuring reliable compensation for ambient temperature fluctuations. Offers a simple SPI digital interface, requiring minimal I/O pins for easy integration with most microcontrollers. Compatible with multiple thermocouple types including K, J, N, T, S, R, and E, providing versatility in system design. Features fault detection for open thermocouples and shorts to VCC/GND to enhance system safety. Supports both 3.3V and 5V logic levels, ensuring broad compatibility across development boards.

24v 0.15A Brushless DC Fan The 24v 0.15A Brushless DC Fan is a compact and reliable cooling solution designed for efficient airflow in electronics and industrial applications. This dc brushless fan 24v features a high-performance brushless motor that ensures low noise, reduced power consumption, and extended lifespan compared to traditional fans. Its centrifugal blower-style design directs air precisely where needed, making it perfect for 3D printers, control cabinets, power supplies, and embedded systems. With a 24V DC operating voltage and 0.15A current rating, it delivers consistent cooling performance while maintaining energy efficiency. Built with durable housing and easy mounting points, this fan is ideal for continuous operation environments. Features: Efficient cooling performance Stable 24V DC operation Low power consumption Quiet and smooth airflow Compact and space-saving design Durable brushless motor technology Easy installation and wiring Ideal for electronics and enclosure cooling

TL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable TL Smoother Addon Module Board Kit for 3D Printer Pattern Elimination Motor Clipping Filter. This product mainly aims at the ripple generated by parallel 3D printer printing, especially the effect of using 8825 drive and low resistance motor. It can effectively eliminate the uneven signal wave at low speed and low speed so as to achieve the effect of relative certificate signal wave when using 8825 drive 24V power supply Delta machine The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver. You will get smoother movement, especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects. check out : TL-Smoother module For 3D printer motor drivers V2.0 Note : If you are currently using Trinamic Drivers with SpreadCycle, or are considering upgrading to such drivers, then these TL-Smoothers may not offer the big benefit you are expecting. This is because Trinamics patented SpreadCycle performs a very similar (albeit more efficient) smoothing/filtering process, with extra features like stealthChop that also assist in this regard. Features: TL Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result. The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver. You will get smoother movement, especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects. Application: These TL-Smoother Stepper Filter Modules are designed and built specifically for 3D printing and have been stocked to help you improve the quality of your prints by ensuring that all the electrical signals are coherent, evenly spread, and consistent throughout each wave cycle. They fit between the stepper drivers and the Stepper Motors , where they help reduce feedback and inductive charges with flyback diodes.

Ultrabase 300*300mm  3D Printer Platform Tempered Heated Bed Glass Plate with Microporous Coating This is a high-quality sticker with adhesive backing for the 3d printer builds plates of dimensions 300mm x 300mm. Ultrabase Glass Plate helps you to avoid warping and offers a flat surface. Ultrabase 3D Printer glass plate works perfectly with Creality3D printers in the 300mm size. It helps you to avoid warping and enables you to perform 3D prints with flat surfaces. Ultrabase helps to prevent following problems: Filament doesn’t stick onto the platform due to flatness of aluminium bed Ultrabase is an alternative to use blue tape or glue to make 3D prints stick to the platform and minimize warping It makes objects more easy to remove. Often 3D printed parts are not easy to remove or you are afraid to remove them from the building bet. Ultrabase stops this worries. You don’t want to chance your masking tape after each 3D print. If you don’t change it it may be damaged and your object will not stick on the surface. Ultrabase is your solution! check out : Ultrabase 235*235mm 3D Printer Platform Tempered Heated Bed Glass Plate with Microporous Coating Temperature settings for different filaments: PLA: 50-70ºC Flexible filament: 50-70ºC ABS: 100-125ºC ( 110ºCis recommended ) PC: 100-130ºC ( 120ºC is recommended ) Nelon: 90-120ºC ( 110ºC is recommended ) PP: 100-130ºC ( 120 ºC is recommended ) PETG: 50-70ºC Note: Suggested bed temperature may vary depending on the filament material. Please properly level the bed before printing Never let the nozzle rub against the Ultrabase directly Clean the platform surface with alcohol/water. check out : Ultrabase 200*200mm 3D Printer Platform Tempered Heated Bed Glass Plate with Microporous Coating

24V DC 4020 Centrifugal Cooling Fan with XH2.54-2P 30CM Cable This 24V DC 4020 hydraulic centrifugal cooling fan is built with premium, high-temperature-resistant materials for exceptional durability. It’s perfect for cooling heat sinks on hot ends, 3D prints, and various other applications. The 24V DC 3D printer cooling fan is crafted from high-quality PBT reinforced with 30% glass fibre, along with VO and precision bearings, it delivers a long lifespan and low noise operation. This DC cooling fan is designed to manage temperatures up to 75°C, it operates optimally at 40°C and supports continuous 24-hour use. Features Best 35mm radial cooling fan. Operates at 24V DC with a 2-pin connector. Constructed from premium PBT reinforced with 30% glass fiber and VO. Features high-precision bearings for extended durability and quiet performance. Ideal for efficiently cooling heat sinks on hot ends, 3D prints, and other applications.

50mm x 33M High Temperature Resistant Tape for 3D Printer The item is a simple and practical Kapton tape, which is mainly made of durable polyimide and silicone materials, easy to use, clean removal, no residue. It is highly resistant to heat and chemicals, puncture and tear resistant at high temperatures and offers optimal performance in electrical and thermal insulation, and it is ideal for protecting sensitive printed circuit board (PCB) components such as gold leads and gold fingers during the process of wave soldering. This Koptan 50mm x 33m High-Temperature Resistant Tape for 3D Printers is a polyester film tape with a high-temperature resistant adhesive. Primarily used to hold transfer sheets in place while sublimating onto a variety of items and hold the polymer plate on the heating platen in the hot foil stamping. Excellent heat & solvent resistance. Minimal shrinkage after baking and clean removal. Due to Koptan tape’s large range of temperature stability and electrical isolation ability, it is used during the manufacturing and final assembly of electronic components. It acts as a protective layer that isolates and prevents the electrostatic discharge of sensitive components, also protecting and restraining components during high temp applications and reflow soldering procedures. check out : 20mm Adhesive Conductive Copper Tape (30 Meter) ABS and Koptan adhere extremely well to one another, making Koptan tape a perfect 3D printing bed surface layer. It is usually applied to a glass or aluminum bed surface, where extruded ABS filament adheres to the surface.

12V 2A SMPS This industry power module SMPS converts AC power to 12V 2A DC. It has built-in over-voltage, over-current, and short-circuit protection. Perfectly designed and well constructed, small and compact size with an indicator. A switched-mode power supply is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a DC or AC source (often mains power) to DC loads, such as a personal computer, while converting voltage and current characteristics. Unlike a linear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimizes wasted energy. Applications: 5050 3528 12V LED Strip Ligh Wireless Router ADSL Cats, HUB Security Cameras Audio/ Video Power Supply 3D Printer LED Driver CCTV Security System LCD Monitor Webcam Router

JHD 128x64 Graphic LCD -Yellow Backlight This is the original jHD128x64 LCD display with Yellow backlight, It is simple to use and works with the vast majority of microcontrollers on the market. With this Graphic LCD, you can do a lot of graphic things. You can make frames as well as small animations. The 128x64 Graphic LCD module has a 128 x 64 pixel LCD screen with a Yellow backlight and a white foreground. This graphic lcd is fully programmable and can show a mix of graphics and text. This 128x64 LCD display is a large, bright Yellow LCD with white back-lit pixels. It is also well known for its widespread use in 3D printers as a RAMPS extension accessory. A display is required if you want to add visual output to your Arduino projects. This LCD display is best suited for graphical upgrades to popular 16x2 LCDs, but it also allows full graphical control. This 128x64 Graphic LCD series allows the user to draw lines, circles, and boxes, set or redefine individual pixels, clear specific blocks of the display, control the backlight, and adjust the baud rate in addition to writing text. The pins of the LCD 128x64 Graphic Yellow Color Backlight LCD Display module are documented on the back of the LCD to aid in wiring it up. It is very simple to connect this LCD to the 3D printer's RAMPS controller. check out : 128x48 Green LCD Also check 128x64 Graphic LCD with a blue backlight available on Iotcart. It features a display format of 128x64 dots and is based on the ST7920 controller, a popular Arduino controller. The LCD supports both 8-bit parallel interface and serial SPI modes. The power supply voltage is 5.0V, and the operational temperature ranges from -20°C to +70°C.

4020 Turbo 3D Fan Cooler The 4020 turbofan cooler is designed for 3D printers and needs an operating voltage of 12V. The DC turbo fan consumes low power and performs PWM functions and is also called a rack cooling fan. The 4020 3d Printer turbofan is manufactured with incoming PBT anti-plastic material that provides great protection against fire and does not cause deformation at high temperature. The 4020 turbofan blower is designed for a super cooling effect. This is achieved with a design for upper ventilation and super wind pressure. Features: Perfectly fit on the extruder Noiseless Performance Low Current consumption Easy to install and connect.

Ultrabase 200*200mm 3D Printer Platform Tempered Heated Bed Glass Plate with Microporous Coating This is a high-quality sticker with adhesive backing for the 3d printer builds plates of dimensions 200mm x 200mm. Ultrabase Glass Plate helps you to avoid warping and offers a flat surface. Ultrabase 3D Printer glass plate works perfectly with Creality3D printers in the 200mm size. It helps you to avoid warping and enables you to perform 3D prints with flat surfaces. Ultrabase helps to prevent following problems: Filament doesn’t stick onto the platform due to flatness of aluminium bed Ultrabase is an alternative to use blue tape or glue to make 3D prints stick to the platform and minimize warping It makes objects more easy to remove. Often 3D printed parts are not easy to remove or you are afraid to remove them from the building bet. Ultrabase stops this worries. You don’t want to chance your masking tape after each 3D print. If you don’t change it it may be damaged and your object will not stick on the surface. Ultrabase is your solution! Temperature settings for different filaments: PLA: 50-70ºC Flexible filament: 50-70ºC ABS: 100-125ºC ( 110ºCis recommended ) PC: 100-130ºC ( 120ºC is recommended ) Nelon: 90-120ºC ( 110ºC is recommended ) PP: 100-130ºC ( 120 ºC is recommended ) PETG: 50-70ºC Note: Suggested bed temperature may vary depending on the filament material. Please properly level the bed before printing Never let the nozzle rub against the Ultrabase directly Clean the platform surface with alcohol/water. check out : Ultrabase 310*310mm 3D Printer Platform Tempered Heated Bed Glass Plate with Microporous Coating

PTFE 4x6mm White Teflon Tube for 3mm 3D Printer Filament - 1 Meter (4mm ID X 6mm OD) The 4x6mm Teflon Tubing – For 3D Printers 3mm Filament good corrosion resistance and high insulation resistance. High or low-temperature resistance. It has unique lubricity and the surface is no sticky. PTFE Teflon Tube for 3mm 3D Printer Filament has 4mm inner diameter and 6mm outer diameter. PTFE Tube to get the best printing performance out of your 3D Printer. It increases print quality, reduces filament jams, and improves retraction. Durable using in the atmosphere and protect itself from being aged. Non-inflammability and made of PTFE material. check out : 1.75mm 100g Red ABS Filament