11.1v 5200mah 65C 3S1P Bonka Lipo Battery

XL4015 5A Constant Current/Voltage LED Drives Lithium Battery Charging Module This versatile Buck converter serves as a standard step-down module equipped with overcurrent protection for a variety of applications. It functions as a charging device for lithium, nickel-cadmium, and nickel-hydrogen batteries, as well as battery packs, solar panels, wind turbines, and as a high-power LED driver module. The buck converter offers two modes, constant voltage and constant current, with corresponding indicators to display the current mode. In lithium battery charging mode, the float voltage and charge current can be adjusted to indicate charging or full charge status. Additionally, the module features current limiting protection, ensuring that it will not suffer damage in the event of a short circuit. This linear module has constant voltage and constant current function (CC CV). and it has a good performance. When you use it as a charger. this module use good chip as core and it is stable. also its ripple is low to 50mV. Features Short circuit protection: Yes(limited current 8A) Over-temperature protection: Yes (automatically turn off the output after over temperature) Input reverse connection protection: None, (If necessary, please input a large current diode in the input string) Installation method: 4 3mm silk Wiring method: terminal block or soldering terminal, V-IN is input. Applications: LCD Monitor and LCD TV Portable instrument power supply Telecom / Networking Equipment

12V 10A PWM DC Motor Speed Controller The DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The 12 Volt DC Motor Speed Controller can provide a continuous current of 10A to your DC motor or other DC load. The circuit also includes a 10A fuse, with the reverse connection of the power supply and control voltage over-voltage protection function. This speed regulator uses a barrier terminal block as its wiring type. The output voltage is linear under load and features a control frequency of 13kHz. Note: This cannot be used for the brushless motor. The controller is not reverse-polarity protected and will be damaged if it connects the supply voltage with the wrong polarity. Features: Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current protection. Control voltage over-voltage protection function The overload and short circuit protecting current is 10A Applications: Automotive: Controlling the speed of cooling fans, windshield wipers, and air conditioning systems. Industrial Automation: Managing the speed of conveyor belts, exhaust fans, and other motor-driven machinery. Home Appliances: Adjusting the speed of fans, pumps, and other household devices. Treadmills: Regulating the speed of the treadmill belt for different workout intensities. Robotics: Providing precise speed control for DC motors in robotic projects. DIY Projects: Ideal for custom electronics projects requiring variable motor speed control

Holybro Micro M9N GPS With Case The Holybro Micro M9N GPS With Case is a compact, high-performance M9N GPS with case module designed to deliver precise positioning and reliable navigation for advanced drone and UAV applications. Featuring multi-constellation GNSS support, this GPS unit tracks multiple satellite systems simultaneously to ensure fast satellite acquisition, improved accuracy, and strong signal reliability. The included protective case not only enhances durability but also simplifies mounting and installation on a variety of drone frames and robotic platforms. Equipped with an IST8310 compass and a high-performance antenna, this GPS module provides accurate heading information and robust signal reception, enhancing overall flight stability and control. Whether you’re conducting waypoint missions, autonomous navigation, or complex aerial maneuvers, the Holybro Micro M9N GPS With Case delivers dependable performance in both indoor and outdoor environments. Its lightweight design and advanced features make it an excellent choice for hobbyist builders and professional UAV developers alike. Features: Compact M9N GPS with case designed for accurate and reliable drone navigation. Supports multi-constellation GNSS for faster satellite lock and improved positioning accuracy. Integrated IST8310 compass provides precise heading and orientation data. High-performance antenna ensures strong signal reception and stable navigation. Protective case improves durability and simplifies installation on drone frames. Ideal for multirotor drones, UAV platforms, and autonomous navigation applications.

Holybro M10 GPS Standard GPS (GHR 1.25mm 10 pin) The Holybro M10 GPS Standard GPS (GHR 1.25 mm 10-pin) is a high-precision M10 GPS module engineered for reliable positioning and navigation in advanced drone applications. Featuring the powerful u-blox M10 series chipset, this GPS unit delivers fast satellite acquisition, improved signal sensitivity, and accurate location data to enhance flight stability and autonomous performance. Its standard connector and 10-pin interface make it easy to integrate with a wide range of flight controllers and UAV systems, ensuring seamless setup for custom builds and professional projects. Designed for both hobbyists and serious drone developers, the Holybro M10 GPS provides robust navigation feedback that helps maintain steady flight paths, enable precise waypoint missions, and improve return-to-home accuracy. The compact and lightweight module is perfect for multirotor drones, fixed-wing aircraft, and research UAVs that demand dependable positioning even in challenging environments. With its advanced u-blox technology and M10 series performance, this GPS unit enhances overall drone control and situational awareness for every flight. Features: High-precision M10 GPS module powered by advanced u-blox M10 series technology for accurate positioning. Fast satellite acquisition and strong signal sensitivity for reliable navigation performance. Standard GHR 1.25 mm 10-pin connector for easy and secure integration with flight controllers. Provides stable location data to support autonomous flight and return-to-home functions. Compact and lightweight design suitable for multirotor, fixed-wing, and UAV platforms. Ideal for professional drone applications, research projects, and advanced UAV builds.

SpeedyBee F7 V3 Flight Controller The SpeedyBee F7 V3 Flight Controller is a powerful and reliable Flight Controller built for FPV racing, freestyle, and long-range drone applications. Powered by a high-speed STM32F7 processor, it delivers fast signal processing and precise flight control for smooth, responsive performance. Its standard 30.5 × 30.5 mm mounting pattern ensures easy compatibility with most FPV drone frames, making it an ideal choice for both new builds and upgrades. Designed for convenience and flexibility, this Flight Controller supports wireless configuration via Bluetooth and Wi-Fi, allowing quick setup and tuning directly from a mobile device. It features integrated Betaflight OSD, onboard barometer, multiple UARTs, and wide peripheral support for GPS, telemetry, and video systems. With 6S LiPo compatibility and a well-optimized layout for clean wiring, the SpeedyBee F7 V3 Flight Controller offers a perfect balance of performance, expandability, and user-friendly design for FPV pilots at any skill level. Features: High-performance STM32F7 processor for fast, stable, and responsive flight control Built-in Bluetooth & Wi-Fi support for easy wireless configuration and tuning Integrated Betaflight OSD and onboard barometer for enhanced flight data and altitude sensing Supports up to 6S LiPo input, ideal for racing, freestyle, and long-range drones Multiple UART, I2C, and SPI ports for GPS, telemetry, and peripheral expansion Standard 30.5 × 30.5 mm mounting pattern for wide compatibility with FPV frames

RS2205 2300KV Brushless DC Motor for Drone (Counterclockwise Rotation) The RS2205 2300kV Brushless DC Motor is a high-performance brushless DC motor for drone applications, specially designed for FPV racing and high-speed quadcopters like the QAV250 and QAV300. With a powerful 2300kV rating, this motor delivers high RPM and efficient thrust, making it ideal for pilots who want responsive control and fast acceleration. Built using durable, high-quality materials, this brushless DC motor offers reliable performance while remaining affordable for beginners learning the fundamentals of FPV flying. One of its standout features is the self-cooling design, where specially engineered cooling fins draw air through the motor coils from the base, increasing airflow as the motor spins faster to maintain optimal operating temperatures. The motor also uses curved N52 Neodymium magnets for maximum magnetic efficiency and genuine Japanese NMB bearings, which ensure smoother rotation and can reduce motor temperature by up to 30%, improving both durability and flight performance. Features: Active Cooling Fins made of High Strength N52 Neodymium Magnets greatly reduce the working motor temperature. Lightweight and low-CG design. Japanese bearings ensure high-performance delivery. Improve anti-off ring performance to ensure stable and safe operation.

Holybro Tekko32 F4 4 in 1 50A ESC The Holybro Tekko32 F4 4 in 1 50A ESC is a high-performance 50A ESC designed to deliver smooth and reliable power distribution for multirotor drones and other UAV platforms. Built with cutting-edge components and an efficient F4 processor, this ESC ensures responsive throttle control and precise motor management, enhancing flight stability and overall performance. Its compact 4-in-1 design consolidates four individual ESCs into a single unit, simplifying installation and reducing wiring complexity for cleaner builds. Engineered for both hobbyists and professional drone builders, this 4 in 1 50A ESC supports advanced features like BLHeli_32 firmware compatibility, high refresh rates, and robust current handling for demanding flight maneuvers. The rugged construction and optimized thermal performance make it ideal for racing drones, freestyle builds, and custom UAV projects that require dependable power delivery and efficient heat dissipation. Whether you’re pushing your craft to its limits or seeking smooth, consistent control, the Holybro Tekko32 F4 delivers the performance and reliability you need. Pin Map: Features: High-performance 50A ESC designed for smooth and efficient motor control in multirotor drones. 4 in 1 ESC design combines four controllers into a single unit, reducing wiring and saving space. Supports advanced ESC firmware for precise throttle response and improved flight performance. Handles high current loads reliably, making it suitable for demanding flight conditions. Optimized thermal design ensures stable operation and effective heat dissipation. Ideal for racing, freestyle, and professional UAV drone builds.

7Semi BNO086 IMU Mini Breakout Board for Robotics The 7Semi BNO086 IMU Mini Breakout Board for Robotics is a high-precision 9-axis inertial measurement unit designed to deliver accurate motion and orientation data in real time. Powered by the Bosch BNO086 sensor, it integrates a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer with an advanced built-in sensor fusion algorithm, eliminating the need for complex external processing. This breakout board provides exact orientation, acceleration, and rotational data through I2C and SPI interfaces, making it easy to integrate with microcontrollers used in robotics and embedded systems. Its compact size and reliable performance make it ideal for robot navigation, drone stabilization, AR/VR motion tracking, and IoT automation applications, where precise and stable motion sensing is critical. Features: High-Precision Motion Tracking: Ceva's MotionEngine enables seamless 9-Axis and 6-Axis sensor fusion, improving the user experience in AR, VR, robotics, and IoT apps. Dynamic Calibration: Automatically adjusts for bias in the accelerometer and gyroscope based on time and temperature, ensuring consistent performance under changing conditions. Configurable Activity Tracking: Includes classification modes for walking, running, standing, in-vehicle, and cycling activities. Intelligent Power Management: Activity classifiers and wake-on-motion features help to optimise power use. Host-Side Library Compatibility: Expands capabilities by including libraries that support VR, AR, and attitude monitoring, making it ideal for high-performance sensor applications. Flexible Connectivity Options: Includes a 4-pin JST connector for easy MCU connection and 0.1"-spaced pins for breadboard use. I2C Interface Compatibility: Allows for flexible and efficient connection, ensuring dependable data transport.

AA Zinc Panasonic Special Battery The Panasonic AA Zinc Special Battery is an affordable and dependable power source designed for everyday low-drain devices. Made with Panasonic’s trusted build quality, this zinc-carbon AA cell delivers consistent output for home and office essentials like wall clocks, TV remotes, torches, toys, and basic electronic gadgets. Perfect for users who need a cost-effective battery for regular use, it provides stable performance, a good shelf life, and easy installation. This makes it a practical choice for households, students, small businesses, and hobby enthusiasts who want reliable power without the high cost of premium batteries. Features: Zinc-carbon chemistry for economical, everyday use Designed for low-drain household and office devices Stable power output for clocks, remotes, toys, and torches Lightweight and easy to install in AA-compatible gadgets Reliable build quality from Panasonic for consistent performance Long shelf life for storage and backup power needs

Holybro Sik Radio Telemetry V3-100 mW 433 Mhz The Holybro SiK Radio Telemetry V3-100 mW 433 MHz is a reliable radio telemetry solution designed for real-time communication between your UAV and ground control station. Operating on the 433 MHz frequency with a 100 mW power output, this module provides stable long-range data transmission for telemetry, mission planning, and live flight monitoring. Its compact design and robust construction make it ideal for integration with a wide range of drone flight controllers and autopilot systems, enabling dependable performance even in challenging RF environments. Built to support both hobbyist and professional applications, this radio telemetry set delivers clear, low-latency communication for flight data, GPS coordinates, and control signals. Whether you’re conducting autonomous missions, monitoring live sensor data, or configuring advanced drone parameters mid-flight, the Holybro SiK Radio Telemetry V3 helps bridge the air-to-ground communication gap with secure and consistent connectivity. Features: Reliable radio telemetry module designed for real-time data communication between drone and ground station. Operates on 433 MHz frequency with 100 mW output power for stable long-range transmission. Supports bidirectional telemetry for live flight data, GPS information, and mission updates. Compatible with popular drone flight controllers and autopilot systems. Compact and lightweight design for easy integration into UAV platforms. Ideal for autonomous missions, flight monitoring, and professional UAV applications.

CHAM CMINR14500F2 1000mAh 2C 3.6V AA Rechargeable Li-ion Battery Introducing the CHAM CMINR14500F2 rechargeable Li-ion battery – a compact, single-cell AA-sized power source delivering 3.6 volts at 1000mAh. Designed for projects that require a reliable 3.76V high-capacity supply, this battery is perfect for powering portable devices such as flashlights, hobby transmitters, and receivers. This Li-ion battery also serves as an excellent replacement for standard non-rechargeable AA batteries, making it a cost-effective and efficient option for applications like RC transmitter/receiver remotes. The versatile lithium ion battery terminals are compatible with many adapters or holders, or they can be permanently soldered to your device’s wiring for seamless integration. Important Guidelines: Avoid Deep Discharge: Do not let the Li-ion battery drop below 2.5V under load. Initial Charge: Fully charge to 4.2V before the first use. Metal and Magnets: Keep any metal moving parts or magnets away from both the positive (top) and negative (bottom) contacts. Proper Installation: Never force the battery into its compartment. Battery Pairing: Do not mix old and new battery cells. Charger Quality: Always use a reliable, high-quality battery charger. Heat Exposure: Keep the battery away from high temperatures. Prevent Short-Circuiting: Avoid connecting the positive (top) and negative (bottom) terminals directly. Safe Storage: When not in use, store the battery in its plastic holder or another insulating container. Charging Voltage: Do not exceed 4.22V during charging—this is another reason to choose a quality charger. Supervised Charging: Never leave the battery charging unattended. Long-Term Storage: Do not store the battery fully charged for extended periods. Optimal Storage Conditions: Store in a cool, dry place at about 3.7V (the recommended storage charge). Post-Discharge Care: Recharge the battery as soon as possible after it has been discharged. User Knowledge: Ensure you are well-informed about proper Li-ion battery discharging, charging, assembly, handling, and storage before use. Features Form Factor: Cylindrical Battery Type: Lithium-Ion Performance: High efficiency with substantial capacity Design Feature: Flat top for compatibility with a wide range of devices

Holybro S500 V2 DIY Drone Kit (Included Motor, Prop and ESC) The Holybro S500 V2 DIY Drone Kit (Included Motor, Prop and ESC) is a complete DIY drone kit designed for builders and enthusiasts who want a reliable, high-performance UAV platform right out of the box. This all-in-one kit includes quality motors, propellers, Electronic Speed Controllers (ESCs), and a durable S500 V2 frame, giving you everything you need to assemble a capable multirotor drone with confidence. Whether you're a hobbyist looking to build your first drone or a professional seeking a customizable platform for experimentation and upgrades, this kit provides a solid foundation. Engineered for ease of assembly and dependable flight performance, the Holybro S500 V2 DIY Drone Kit combines balanced thrust, stable handling, and efficient power delivery for smooth flight characteristics. Its thoughtfully selected components ensure compatibility and optimized performance, making the build process straightforward while offering room for future enhancements. From casual flying to aerial photography and DIY experimentation, this kit empowers you to bring your custom drone ideas to life with quality and precision. Features: Complete DIY drone kit including frame, motors, propellers, and ESCs for easy assembly. Durable S500 V2 frame designed for stable and reliable multirotor performance. Balanced propulsion system delivers smooth thrust and efficient flight. Supports customization and upgrades with compatible flight controllers and accessories. Suitable for beginners learning drone assembly as well as advanced UAV projects. Ideal for DIY builds, aerial experimentation, and educational drone applications.

7Semi BME280 Temperature, Humidity & Pressure Sensor Nano Breakout The 7Semi BME280 Nano Breakout is a compact and highly reliable environmental sensing module designed for projects that require accurate temperature, humidity, and barometric pressure readings. Powered by Bosch’s trusted BME280 sensor, it delivers precise data with ±1.0°C temperature accuracy, ±3% humidity accuracy, and ±1 hPa pressure accuracy. With its 2.54mm pitch header and I2C interface, this breakout integrates effortlessly into Arduino, Raspberry Pi, and other embedded systems, making it perfect for weather stations, smart home setups, and environmental monitoring projects. Its small footprint and robust construction make it suitable for space-constrained applications without compromising performance. Whether you're building a DIY weather dashboard, automating a greenhouse, or working on an IoT environmental sensor node, the BME280 ensures fast, stable, and reliable readings. This sensor is also capable of altitude measurement, bringing added versatility to drones, outdoor devices, and scientific experiments. Features: Provides highly accurate temperature, humidity, and barometric pressure measurements using the Bosch BME280 sensor. Supports I2C communication and operates at 3.3V, ensuring simple wiring and compatibility with common microcontrollers. Compact nano breakout design with a 2.54mm pitch header, making it ideal for breadboard and prototype-friendly builds. Offers dependable performance with ±1.0°C temperature accuracy, ±3% humidity accuracy, and ±1 hPa pressure accuracy. Functions as an altimeter with ±1 meter accuracy, adding enhanced functionality for robotics and outdoor applications. Built with a durable and reliable layout, ensuring long-term stability in environmental and scientific projects. Suitable for weather monitoring, smart home automation, agriculture, greenhouse tracking, and IoT systems.

HQProp 7X4X3 Light Grey (2CW+2CCW)-Poly Carbonate Triblade Propeller HQProp, short for “High-Quality Propellers,” is a well-known brand in the field of drone and multirotor propellers. HQProp produces a wide range of propellers designed for various types of drones, including quadcopters, multirotors, FPV racing drones, freestyle drones, and more. The brand is popular among drone enthusiasts and pilots for its focus on quality, performance, and innovation. HQProp has gained popularity within the drone community, particularly among FPV (First-Person View) racing and freestyle enthusiasts, for its innovative designs and commitment to delivering top-notch propeller options. Drone pilots often experiment with different propellers to find the best balance between thrust, efficiency, and maneuverability for their specific needs.  It’s important to note that propeller selection can have a significant impact on the overall performance and flight characteristics of a drone. Choosing the right propellers for a drone involves considering factors such as drone size, weight, motor specifications, flight characteristics, and intended use. Features: HQProp offers a wide range of propellers in different sizes, pitches, blade counts, and materials, allowing pilots to choose based on speed, stability, efficiency, or agility Available in materials like durable polycarbonate, lightweight carbon fiber, and composite blends, each affecting thrust, durability, and overall performance Known for innovative designs with optimized blade shapes and aerodynamics that improve efficiency, control, and reduce noise Popular in the FPV racing and freestyle community for delivering quick acceleration, high speed, and smooth maneuverability Comes in various sizes to suit different motor configurations and drone frame types, including standard and inverted setups Offered in multiple color options, allowing users to customize the appearance of their drones Enables performance tuning by selecting different sizes and pitches for better speed, control, or longer flight time Choosing the right propeller based on motor specs, drone weight, and flying style is important for achieving optimal performance

Sunny Sky ESC X125A PRO SBEC The Sunny Sky ESC is a lightweight, high-performance electronic speed controller specifically engineered for demanding drone and UAV applications. Its compact and streamlined design allows for easy integration into a wide range of drone frames without adding unnecessary weight. Equipped with advanced control features, this ESC provides precise throttle response, enabling pilots to achieve smooth acceleration, deceleration, and overall better maneuverability. Designed for efficiency, the Sunny Sky ESC optimizes power management to extend flight times while maintaining consistent performance. It is compatible with multiple motor types, including brushless motors commonly used in racing drones, freestyle drones, and aerial robotics platforms. This versatility ensures smooth and stable operation across various drone configurations. Features: Lightweight, compact design for easy integration into drones High-performance ESC for precise throttle response and smooth control Efficient power management to optimize flight time Compatible with multiple motor types, including brushless motors Reliable and durable for high-speed drones and aerial robotics Stable operation under challenging conditions and high-current loads Advanced thermal management and protective features for safety Ideal for FPV racing, freestyle drones, and professional drone applications