0.1 uF 50V Ceramic Capacitor (Pack of 10) Ceramic capacitors are great for filtering out noise above 1KHz. Power spikes and other noise can cause all sorts of weird things to happen in your project so having a few of these should help quite a bit! This specific capacitor is rated at 0.1uF and 50V. Place these next to the VCC pin on all of your ICs to improve stability. These capacitors have a 0.100″ (2.54mm) spacing, meaning these work great with a solderless breadboard or protoboard. Package Includes: 10 x 0.1 uF 50V Ceramic Capacitor Specifications: Capacitance 0.1µF Tolerance ±20% Rated Voltage 50.0V Type Through-Hole Polarity Non-Polarised

1 Ohm Resistor - (Pack of 10) The 1 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour Code Chart: Package Includes: 10 x 1 Ohm Resistors Specifications: Resistance  1 Ohm Resistors Material  Carbon Film Resistors Power (Watts) 0.25W, 1/4W Tolerance +/- 5% Case Axial  Dimensions  0.094" Dia x 0.248" L (2.40mm x 6.30mm) Weight  5 grams

100 Ohm Resistor - (Pack of 10) The 100 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour code chart: Applications: To limit current in a circuit To measure current in a circuit To generate heat To remove electrical energy To divide voltage To set the gain of an amplifier To set a time delay To set frequency of an oscillator To protect against surges To absorb unwanted signals Electronic electricity meter To measure temperatures Package Includes: 10 x 100 Ohm Resistors Specifications: Resistance  100 Ohm Resistors Material  Carbon Film Resistors Power (Watts) 0.25W, 1/4W Tolerance +/- 5% Case Axial  Dimensions  0.094" Dia x 0.248" L (2.40mm x 6.30mm) Weight  5 grams

100K Ohm Resistor The 100K ohm Carbon Film Resistors, available in a pack of 10, are essential for engineering projects and DIY enthusiasts, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. The 100K ohm resistor, as a passive component, finds applications in reducing current flow, adjusting signal levels, and more in electronic circuits. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Key

100KPF Ceramic Cap  A 100KPF ceramic capacitor is a type of capacitor that is made of ceramic material and has a capacitance value of 100,000 picofarads (pF). A capacitor is an electronic component that stores an electrical charge and is commonly used in circuits to filter out noise, smooth out voltage fluctuations, and store energy. Ceramic capacitors are popular for use in high-frequency circuits because they have a low loss tangent and good stability over a wide temperature range. The 100KPF ceramic capacitor is a relatively large-value capacitor and is typically used in applications where a moderate amount of capacitance is required. Applications: Used in High-frequency circuits Used in Power supply decoupling Used in timing circuits Used in Noise filtering circuits Used in Oscillator circuits Package Includes: 20 x 100KPF Ceramic Cap Specifications: Capacitance 100,000 pF Operating temperature -55°C to +125°C Voltage rating 50 volts or less Tolerance +20%/-20% Dielectric constant 3.9 to 9.3 Loss tangent 0.0004 or less Life expectancy 20 years or more Dimensions 1x1x2mm Weight 1g

100uF / 25V Electrolytic Capacitor High quality 100uF/25V radial electrolytic capacitors. Work great as voltage noise suppressors for voltage regulators and for power supply. Putting one of these across power and ground in each of your projects ensures a smooth noise resistant power supply and greater reliability. Package Includes: 5 x 100uF / 25V Electrolytic Capacitor Specifications: Capacitance 100uF Volatge 25 Mounting  Through Hole

10k Ohm Resistor - Pack of 10 Resistors are electronic components that have a specific, never-changing electrical resistance. The resistor's resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can't generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Common resistors are used to limit current, divide voltages, and pull up I/O lines. 10K ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. Cracking the Resistor Color Code: How to read Resistor Colour Codes. Applications: To limit current in a circuit To measure current in a circuit To generate heat To remove electrical energy To divide voltage To set the gain of an amplifier To set a time delay To set frequency of an oscillator To protect against surges To absorb unwanted signals Electronic electricity meter To measure temperatures Package Includes: 10 x 10k Resistors Specifications: Resistance  10K ohm Material  Carbon Film Resistors Dimensions  3 x 1 x 1cms  Weight  5 grams

10M Ohm Resistor - (Pack of 10) The 10M ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour Coding: Package Includes: 10 x 10M Ohm Resistors Specifications: Resistance  10M Ohm Resistors Material  Carbon Film Resistors Power (Watts) 0.25W, 1/4W Tolerance +/- 5% Case Axial  Dimensions  0.094" Dia x 0.248" L (2.40mm x 6.30mm) Weight  5 grams

12 MHz Crystal Oscillator - (Pack of 10) The 12MHz crystal oscillator circuit sustains oscillation by taking a voltage signal from the quartz resonator, amplifying it, and feeding it back to the resonator. It provides clock pulses of 12MHz frequency. The popularity of the crystals is due to the low cost. How are 12MHz crystal oscillators useful? One of the most important traits of the crystal oscillator is that it exhibits very low phase noise. In the crystal oscillator, the crystal mostly vibrates in one axis, therefore only one phase is dominant. This property of low phase noise makes them particularly useful in telecommunications where stable signals are needed, and in scientific equipment where very precise time references are needed. The result is that a quartz crystal behaves like a circuit composed of an inductor, capacitor and resistor, with a precise resonant frequency. Package Includes: 10 x 12MHz Crystal Oscillator Specifications: Frequency Range 12MHz Tolerance(%) 30 Operating Temperature Range -10°C to +60°C Dimensions  10 x 4.4 x 3.3(mm) Weight  5 grams

16MHz Crystal Oscillator - (Pack of 5) The 16 MHz crystal oscillator circuit sustains oscillation by taking a voltage signal from the quartz resonator, amplifying it, and feeding it back to the resonator. It provides clock pulses of 8 MHz frequency. The popularity of the crystals is due to the low cost. How are crystal oscillators useful? One of the most important traits of the crystal oscillator is that it exhibits very low phase noise. In the crystal oscillator, the crystal mostly vibrates in one axis, therefore only one phase is dominant. This property of low phase noise makes them particularly useful in telecommunications where stable signals are needed, and in scientific equipment where very precise time references are needed. The result is that a quartz crystal behaves like a circuit composed of an inductor, capacitor and resistor, with a precise resonant frequency. Also check pack of 10 32.768KHz Crystal Oscillators available on the Iotcart website. Each oscillator provides clock pulses with a frequency of 8 MHz. The crystal oscillator can be utilized as a UART clock (6×1.8432 MHz) and allows integer division to common baud rates. Also check 12MHz Crystal Oscillator, sold in a pack of 10 on the Iotcart website. This crystal oscillator is commonly used in various electronic applications, including as a clock for AVR microcontrollers, in microprocessor clocks, network cards, and other consumer electronics. Package Includes: 5 x 16MHz Crystal Oscillator Specifications: Frequency Range 16MHz Tolerance(%) 30 Operating Temperature Range -10°C to +60°C Dimensions  10 x 4.4 x 3.3(mm) Weight  5 grams