Xbee S2C 2mW Wireless Module with Antenna The XBee S2C is a wireless RF module that enables data exchange and communication using ZigBee mesh protocols, which are built on top of the IEEE 802.15.4 PHY. Designed for applications that require low latency and predictable communication timing, the XBee 802.15.4 RF modules provide reliable communication in point-to-point, peer-to-peer, and multipoint/star configurations, making them perfect for end-point connectivity. They can be used as a cable replacement for simple serial communication or as part of a hub-and-spoke network of sensors.With the XBee 802.15.4 RF modules, developers can enjoy true beyond-the-horizon connectivity, as they seamlessly interface with compatible gateways, device adapters, and range extenders. The updated XBee S2C 802.15.4 module, built with the Silicon Labs EM357 SoC, offers improved power consumption, support for over-the-air firmware updates, and an upgrade path to Digi mesh or ZigBee mesh protocols if desired.These XBee modules are especially useful for energy and controls markets where manufacturing efficiencies are critical. If you are a current customer, the XBee Zigbee migration guide can help you migrate from S2B XBee ZigBee modules to the S2C XBee ZigBee modules and take advantage of the performance improvements they offer.The XBee 2mW Wire Antenna S2C, the latest module in the Series 2 line, provides cost-effective wireless solutions for electronic devices, enabling point-to-multipoint device connectivity with ease. It is interoperable with other ZigBee feature set devices, including devices from other vendors. The S2C version of the XBee ZigBee Series 2 module uses the EM357 transceiver, which is faster, has lower current draw, and significantly more RAM and Flash. This enables EM357-based modules to support more network traffic, have more memory for code updates, and operate more efficiently. Features : Integrated, Wire Antenna Interoperable with other ZigBee-compliant devices Programmable versions with onboard microprocessor enable custom ZigBee application development Supports binding and multicasting for easy integration into a home automation platform Through-hole form factor enables flexible design 15 general-purpose I/O lines Industry-leading sleep current of sub 1 µA Firmware upgrades via UART, SPI, or over the air Package Includes: 1 x Xbee S2C 2mW Wireless Module with Antenna  Specifications: Transmit Power 3.1 mW (+5 dBm) Range: Indoor 200 ft (60 m) Outdoor (LOS) 4000 ft (1200 m) Voltage requirements 2.1 to 3.6 VDC Encryption 128-bit AES RF Standard 802.15.4 Dimensions  5 x 4 x 3cms  Weight  15 grams

XBEE USB Explorer The XBee USB Explorer is a versatile board designed to simplify the connection of XBee modules to your computer. By plugging this board into the XBee Explorer, you can easily connect your XBee modules to your computer using a mini USB cable. The FT231X USB-to-Serial converter is the board's standout feature, providing seamless data translation between your computer and the XBee module. The board also includes a reset button and voltage regulator to supply the XBee with ample power.Moreover, the XBee USB Explorer includes four LEDs for easy debugging of your XBee: RX, TX, RSSI (signal-strength indicator), and power indicator. Additionally, the board has headers that are easily compatible with breadboard, enabling the breaking out of each of the XBee's I/O pins to a pair of breadboard-compatible headers. This allows users to make use of the XBee's extended functionality by soldering some header pins or wires to the board.

XBee-PRO ZB S2B Extended Range Module XBee ZB PRO(a.k.a. Series 2) module improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. Series 2 modules allow you to create complex mesh networks. this module has the lowest current draw of any Digi RF product. The XBee-PRO ZB S2B Extended Range Module enables wireless communication for electronic devices at an affordable cost. It is a member of the Digi XBee and XBee-PRO Zigbee RF modules family, compatible with other Zigbee PRO feature set devices from different manufacturers.This programmable module allows easy customization of applications. It comes equipped with an integrated wire antenna and an RPSMA connector. The module is highly suitable for energy and controls markets, where efficient manufacturing is essential.To optimize integration with embedded microcontrollers and reduce development costs, the module features a high-speed Serial Peripheral Interface (SPI). Additionally, the XBee-PRO ZB S2B Extended Range Module uses separate communication protocols, which is characteristic of the Zigbee RF modules family.

Zigbee XBee Pro S2C 802.15.4 Module 63mW 3Km+ 3.2dBi Antenna Zigbee XBee Pro S2C 802.15.4 Module is the perfect solution for long-range communication and home automation. This Zigbee XBee module boasts a 3Km+ range, making it ideal for various applications. It supports binding and multicasting, catering to the needs of home automation enthusiasts. The firmware upgrade can be easily done via UART, SPI, or over the air, ensuring continuous improvement and compatibility. The module's universal design fits Parallax XBee adapters and Propeller Activity Board, showcasing industry-leading mesh-network topology for worldwide deployment. Crafted with quality materials, the 3.2dBi antenna enhances durability and signal strength. Install with ease and enjoy reliable, long-range communication. Zigbee XBee Pro S2C 802.15.4 Module is designed to meet the highest standards of quality and performance. It is perfect for tech enthusiasts, DIY projects, and professionals looking for a reliable long-range communication solution. Package Includes: 1 x Zigbee XBee Pro S2C 802.15.4 Module 63mW 3Km+ 3.2dBi Antenna Specifications: Communication Range 3Km+ Antenna Gain 3.2dBi Compatibility Parallax XBee Adapters, Propeller Activity Board Home Automation Support Yes Firmware Upgrade Via UART, SPI, or Over the Air Mesh-Network Topology Yes