10K Pot Potentiometer - (Pack of 5) The 10K Pot Potentiometer is a three-terminal variable resistor that is used to vary or change the resistance. It is normally used to control any device. The 10K Potentiometer is used for adjusting various parameters like voltage, current, etc in an electronic circuit. The POT Potentiometer is a passive electronic component that has two end terminals with a resistive element and the sliding contact called the wiper acts as the third terminal. It is mostly used in applications where a single turn can provide enough control resolution. Applications of 10K PoTPotentiometer: DIY kits. Major projects. Mini projects. Audio control. Television control. Motion control. Computation. What are Potentiometers? A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. Package Includes: 5 x 10K Pot Potentiometer Specifications: Resistance  10K Ohm  Potentiometer Type  Pot Potentiometer  Material Carbon Film and Metal Interface 3 Pin Shaft Length 15mm Dimensions  1 x 1 x 1cms  Weight  15 grams

10K Pot potentiometer with Knob A 10K Pot potentiometer is a type of variable resistor that is commonly used in electronic circuits. It has a resistance value of 10,000 Ohms, which is indicated by the "10K" in its name. A potentiometer with a knob is a type of manual control that allows you to adjust the resistance of the potentiometer by turning the knob. This is useful for adjusting the level of a signal or the resistance in a circuit. The knob is typically marked with a scale or tick marks to indicate the position of the resistance. Package Includes: 1 x 10K Pot potentiometer with Knob Specifications: Resistance 10K Output signal Analog signal Operating Voltage +5V DC Dimensions 18x23x25mm Weight 8g

10K Preset Potentiometer - (Pack of 5) 10K Preset Potentiometer is a compact variable resistor and PCB mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.  It is a type of variable resistor, It can be easily mounted on PCB and adjusted using a screwdriver. Applications of Preset Potentiometer: Preset potentiometers are widely used throughout electronics wherever adjustments must be made during manufacturing or servicing. The Variable resistors are used for variating voltage as per the need in a circuit.  What are Potentiometers? A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. Package Includes: 5 x 10K Preset Potentiometer Potentiometer Specifications: Model Type Preset Potentiometer  Resistance Value 10k ohm Resistance Tolerance 5% Potentiometer Mounting Through Hole  Dimensions  1 x 1 x 1cms  Weight  5 grams

10K Sliding Potentiometer This Sliding Adjustable Potentiometer Module 10k is an electronic slider potentiometer module that is adjustable or compatible with Arduino / Raspberry Pi for all your DIY needs. This is a sliding type potentiometer whose resistance can adjustable with the help of the slider switch. Applications of Sliding Adjustable Potentiometer Module DIY projects. Arduino projects. Raspberry-Pi projects. Electrical/Electronic projects. Robotic projects. Specifications: Voltage 3.3V or 5V Port Analog Resistance 10K Dimensions  90 * 20mm Weight  25 grams

10K Trimpot Trimmer Potentiometer - (Pack of 5) A 10K trimpot (also known as a trimming potentiometer or variable resistor) is a type of adjustable resistor that is commonly used to fine-tune the performance of an electronic circuit. Trimpots are small, usually having a size of about 5 mm to 20 mm in diameter, and are often used in situations where space is limited. A 10K trimpot has a resistance value of 10,000 ohms (10K ohms). Trimpots are classified by their resistance value, which is measured in ohms. A 10K trimpot has a relatively high resistance value compared to some other types of trimpots. A Trimpot or trimmer potentiometer is a small potentiometer that is used for adjustment, tuning, and calibration in circuits. This potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver. What are Potentiometers? A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. Package Includes: 5 x 10K Trimpot Trimmer Potentiometer Specifications: Resistance  10K Ohm  Potentiometer Type  Trimpot Tolerance  10% Operating Temperature Range (C) -55 to 125 Mounting Type Through Hole Dimensions(LxWxH) 9.8 x 4.9 x 17.8 mm Weight  10 gm

10M Ohm Resistor - (Pack of 10) The 10M ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour Coding: Package Includes: 10 x 10M Ohm Resistors Specifications: Resistance  10M Ohm Resistors Material  Carbon Film Resistors Power (Watts) 0.25W, 1/4W Tolerance +/- 5% Case Axial  Dimensions  0.094" Dia x 0.248" L (2.40mm x 6.30mm) Weight  5 grams

10mm Continuous Buzzer PCB Mount This is the 10mm continuous buzzer PCB Mount , A buzzer is a small yet efficient component to add sound features to our project/system. It is a very small and compact 2-pin structure hence can be easily used on breadboard, Perf Board and even on PCBs which makes this a widely used component in most electronic applications. This a simple buzzer which when powered will make a Beep Beep Beep. Sound due to the internal oscillating circuit present inside it. But, this buzzer is most widely used because it can be customized with help of other circuits to fit easily in our application. If you want to use this buzzer in your Arduino project, then you will need few essential components like breadboard , jumper wires and resistors.

10mm Spiral Wrapping Band Black 10M for Wires This cable management sleeve easy installation, no other tools needed. Wrap the cable management sleeves around your cords and within a minute you can enjoy a tidy and lovable living/working environment. This spiral wire wrap provides safety, protect wires from the wear and tear, prevent electric leakage Easy to install with the thread guide and can be cut to custom lengths. It organizes and protects wires and can easily be cut off to the length you need. Put all messy wires of TV, Theater, Computers, etc. easily and neatly into one cord. Protect wires from the wear and insulation, and can improve the beauty of bending. Spiral tube wrap is mainly used in all kinds of engineering machinery and mining hydraulic equipment and electric wire and cable protection. As It can be completely covered by protection products, that protection in many rod-shaped object effectively Applications: Organize the cables coming from your desktop computer, entertainment system, or other devices that have cluttered, disorganized cables. Perfect for gathering all your cables into one manageable bundle. Package Includes: 1 x 10mm Spiral Wrapping Band Black 10M for Wires Specifications: Material Polyethylene Color Black Length (m) 10 Diameter (mm) 10 Weight (gm) 110

12 MHz Crystal Oscillator - (Pack of 10) The 12MHz crystal oscillator circuit sustains oscillation by taking a voltage signal from the quartz resonator, amplifying it, and feeding it back to the resonator. It provides clock pulses of 12MHz frequency. The popularity of the crystals is due to the low cost. How are 12MHz crystal oscillators useful? One of the most important traits of the crystal oscillator is that it exhibits very low phase noise. In the crystal oscillator, the crystal mostly vibrates in one axis, therefore only one phase is dominant. This property of low phase noise makes them particularly useful in telecommunications where stable signals are needed, and in scientific equipment where very precise time references are needed. The result is that a quartz crystal behaves like a circuit composed of an inductor, capacitor and resistor, with a precise resonant frequency. Package Includes: 10 x 12MHz Crystal Oscillator Specifications: Frequency Range 12MHz Tolerance(%) 30 Operating Temperature Range -10°C to +60°C Dimensions  10 x 4.4 x 3.3(mm) Weight  5 grams

12 Volt Piezo Buzzer Plate (25mm) A 12 Volt Piezo Buzzer Plate (Small) is a device that uses the piezoelectric effect to measure pressure, acceleration, strain or force by converting them to an electrical charge These devices can be used both as sensors and actuators, so they're referred to as transducers, a term applied to any device that can convert one form of energy to another. The sensor turns mechanical energy into electric potential, and the actuator converts electrical energy into mechanical force or motion. The Piezoelectric material used here, ceramic lead zirconate titanate known as PZT has the ability to provide twice the voltage of Quartz under a given force. These transducers are simple, reliable, and very robust, and so find wide use in industry, medicine, and aero-space work. They're unaffected by external electromagnetic fields, and so can be used in applications where electronic sensors would fail. They are stable over a broad range of temperatures, but may be effected by long use at high temperatures. If you want to use this Piezo Buzzer Plate to make small piezo electric generator, for that you will need switch , wires and diodes. Package Includes: 1 x 12 Volt Piezo Buzzer Plate (Small) Specifications: Plate material Brass Diameter  25mm Resonant Frequency 4.6 Khz +/- 0.5 Khz Resonance Impedance 200 Ohms Capacitance 20nF +/- 30% at 1 Khz Weight 1g