100 Ohm Resistor - (Pack of 10) The 100 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour code chart: Applications: To limit current in a circuit To measure current in a circuit To generate heat To remove electrical energy To divide voltage To set the gain of an amplifier To set a time delay To set frequency of an oscillator To protect against surges To absorb unwanted signals Electronic electricity meter To measure temperatures Package Includes: 10 x 100 Ohm Resistors Specifications: Resistance  100 Ohm Resistors Material  Carbon Film Resistors Power (Watts) 0.25W, 1/4W Tolerance +/- 5% Case Axial  Dimensions  0.094" Dia x 0.248" L (2.40mm x 6.30mm) Weight  5 grams

100 Ohm Trimpot Trimmer Potentiometer - (Pack of 5) A Trimpot or trimmer potentiometer is a small potentiometer that is used for adjustment, tuning, and calibration in circuits. This potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver. What are Potentiometers? A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. Package Includes: 5 x 100 Ohm Trimpot Trimmer Potentiometer Specifications: Resistance  100 Ohm  Potentiometer Type  Trimpot Tolerance  10% Operating Temperature Range (C) -55 to 125 Mounting Type Through Hole Dimensions 9.8 x 4.9 x 17.8 mm Weight  10 gm

100K ohm 16mm Rotary Pot Variable Potentiometer Potentiometers are very useful in changing the electrical parameters of a system. It is a single turn 100K Potentiometer with a rotating knob. These potentiometers are also commonly called as a rotary potentiometer or just POT in short.  A potentiometer knob can also be used along with this POT for aesthetic purposes. This is a carbon track, single turn, adjustable resistances, of value 100KOhm Knob potentiometer. It is meant for mounting on panel and is supplied complete with a knob. The knob is affixed on the plastic spindle of the potentiometer and turns the spindle which changes the resistance. The variation of resistance is linearly proportion to the degree of rotation. Potentiometer, in electronic parlance, is a manually variable resistance. Because its most common consumer application is for controlling volume/tone of sound in broadcast receivers, it is loosely referred to as "volume" or ''tone''. It is not a meter with scale and needle. Potentiometers look different depending on size, power handled, application, value and type of material used. There is, however, a common feature-there is wiper which sweeps over a length of resistive material. The two ends of the resistive material as also the wiper are available to the user as electrical terminations. The user gets a variable resistance between the wiper and the two ends. Package Includes: 5 x 100K ohm 16mm Rotary Pot Variable Potentiometer Specifications: Resistance (Ω) 100k Total rotational angle 300° ± 5° Withstand voltage for 1 minute or more at AC 500V Total resistance tolerance ± 20% (more than 1MΏ ± 30%) Length 16mm

100K Ohm Resistor The 100K ohm Carbon Film Resistors, available in a pack of 10, are essential for engineering projects and DIY enthusiasts, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. The 100K ohm resistor, as a passive component, finds applications in reducing current flow, adjusting signal levels, and more in electronic circuits. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Key

100K Preset Potentiometer - (Pack of 5) 100K Preset Potentiometer is a compact variable resistor and PCB mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.  It is a type of variable resistor, It can be easily mounted on PCB and adjusted using a screwdriver. Applications of Preset Potentiometer: The 100K Preset potentiometers are widely used throughout electronics wherever adjustments must be made during manufacturing or servicing. The Variable resistors are used for variating voltage as per the need in a circuit.  What are Potentiometers? A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. Package Includes: 5 x 100K Preset Potentiometer Potentiometer Specifications: Model Type Preset Potentiometer  Resistance Value 100k ohm Resistance Tolerance 5% Potentiometer Mounting Through Hole  Dimensions  1 x 1 x 1cms  Weight  5 grams

100K Trimpot Trimmer Potentiometer - (Pack of 5) A Trimpot or trimmer potentiometer is a small potentiometer that is used for adjustment, tuning, and calibration in circuits. This potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver. What are Potentiometers? A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider. Package Includes: 5 x 100K Trimpot Trimmer Potentiometer Specifications: Resistance  100K Ohm  Potentiometer Type  Trimpot Tolerance  10% Operating Temperature Range (C) -55 to 125 Mounting Type Through Hole Dimensions 9.8 x 4.9 x 17.8 mm Weight  10 gm

100KPF Ceramic Cap  A 100KPF ceramic capacitor is a type of capacitor that is made of ceramic material and has a capacitance value of 100,000 picofarads (pF). A capacitor is an electronic component that stores an electrical charge and is commonly used in circuits to filter out noise, smooth out voltage fluctuations, and store energy. Ceramic capacitors are popular for use in high-frequency circuits because they have a low loss tangent and good stability over a wide temperature range. The 100KPF ceramic capacitor is a relatively large-value capacitor and is typically used in applications where a moderate amount of capacitance is required. Applications: Used in High-frequency circuits Used in Power supply decoupling Used in timing circuits Used in Noise filtering circuits Used in Oscillator circuits Package Includes: 20 x 100KPF Ceramic Cap Specifications: Capacitance 100,000 pF Operating temperature -55°C to +125°C Voltage rating 50 volts or less Tolerance +20%/-20% Dielectric constant 3.9 to 9.3 Loss tangent 0.0004 or less Life expectancy 20 years or more Dimensions 1x1x2mm Weight 1g

100uF / 25V Electrolytic Capacitor High quality 100uF/25V radial electrolytic capacitors. Work great as voltage noise suppressors for voltage regulators and for power supply. Putting one of these across power and ground in each of your projects ensures a smooth noise resistant power supply and greater reliability. Package Includes: 5 x 100uF / 25V Electrolytic Capacitor Specifications: Capacitance 100uF Volatge 25 Mounting  Through Hole

10K ohm 16mm Rotatory Variable Potentiometer Potentiometers are very useful in changing the electrical parameters of a system. It is a single turn 1K Potentiometer with a rotating knob. These potentiometers are also commonly called as a rotary potentiometer or just POT in short.  A potentiometer knob can also be used along with this POT for aesthetic purposes. This is a carbon track, single turn, adjustable resistances, of value 10KOhm Knob potentiometer. It is meant for mounting on panel and is supplied complete with a knob. The knob is affixed on the plastic spindle of the potentiometer and turns the spindle which changes the resistance. The variation of resistance is linearly proportion to the degree of rotation. Potentiometer, in electronic parlance, is a manually variable resistance. Because its most common consumer application is for controlling volume/tone of sound in broadcast receivers, it is loosely referred to as "volume" or ''tone''. It is not a meter with scale and needle. Potentiometers look different depending on size, power handled, application, value and type of material used. There is, however, a common feature-there is wiper which sweeps over a length of resistive material. The two ends of the resistive material as also the wiper are available to the user as electrical terminations. The user gets a variable resistance between the wiper and the two ends. Package Includes: 5 x 10K ohm 16mm Rotatory Variable Potentiometer Specifications: Resistance (Ω)  10k Total rotational angle 300° ± 5° Withstand voltage for 1 minute or more at AC 500V Total resistance tolerance ± 20% (more than 1MΏ ± 30%)

10k Ohm Resistor - Pack of 10 Resistors are electronic components that have a specific, never-changing electrical resistance. The resistor's resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can't generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Common resistors are used to limit current, divide voltages, and pull up I/O lines. 10K ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. Cracking the Resistor Color Code: How to read Resistor Colour Codes. Applications: To limit current in a circuit To measure current in a circuit To generate heat To remove electrical energy To divide voltage To set the gain of an amplifier To set a time delay To set frequency of an oscillator To protect against surges To absorb unwanted signals Electronic electricity meter To measure temperatures Package Includes: 10 x 10k Resistors Specifications: Resistance  10K ohm Material  Carbon Film Resistors Dimensions  3 x 1 x 1cms  Weight  5 grams