IOTIF Trainer and Prototype Board What is an IOTIF Trainer Kit? The IOTIF trainer kit is an electronic trainer kit consisting of three micro-controllers: Raspberry Pi 5 8GB (with SD Card and pre-installed Raspbian OS), Arduino Nano and ESP-01; and a variety of sensors and actuators like Buzzer, LED, RGB LED, Relay, Ultrasonic sensor, Light Dependent Resistor (LDR),  Passive Infrared Sensor (PIR sensor), Humidity and Temperature sensor (DHT-11), Servo motor, Stepper motor, Bluetooth module (HC-05), Liquid crystal display (LCD), Joystick and a Membrane Keypad. How did the IOTIF Trainer Kit come into existence? The IOTIF trainer kit was a grand collaboration between TIF Labs and the CISCO support team and was designed with the objective of spreading awareness among Professors and students on the importance and applications of IoT. In 2017, it was launched at the ‘CISCO Academy National Conference 2017’ held in India, after which TIF Labs kickstarted the manufacturing, supplying and wholesaling of the IOTIF starter kit to educational institutes and training facilities. The kit was highly appreciated by the dignitaries of CISCO and the Professors from all across the country. Why is IOTIF necessary for Engineering students? IOTIF Training and Prototype board was designed to bridge the gap between theoretical knowledge and practical implementation by simplifying the process and eliminating the hassles of the hardware connection. The Trainer kit was designed by keeping in mind the current industry trends and standards and gives the user the best of both worlds, embedded systems and IoT. IOTIF trainer kit would set up the perfect stage for graduating engineers who are interested in developing IoT and embedded systems. This trainer kit is in sync with the latest industrial requirements, which improves the skill set of students and increases their employability. What makes IOTIF an integrated system of microcontrollers? The intercommunication of the Nano board and Raspberry Pi board with the different modules provides an integrated system and gives the IOTIF Trainer Kit an edge. For example; Nano Board can be integrated with ESP-01 to make it Wi-Fi enabled. On the other hand, Raspberry Pi can make use of its on-board WiFi module. The two modules can be programmed to interact with each other, servers and Cloud. Thanks to IoT, the data can be accessed using mobile apps or browsers from any part of the world. Where is the IOTIF LAB set up in India? Since the objective of setting up the IOTIF Lab is to educate and train Professors on the subject on the Internet of Things, IOTIF Labs have been set up in various education institutes, Universities and Labs. Recently, IOTIF was set up in NBKR Institute of Science and Technology. Apart from this, the IOTIF Lab was also set up in the following institutes: Sona Institute of Technology Trident Academy of Technology Swarnandhra Institute of Engineering & Technology Gokhale Education Society's R. H. Sapat College of Engineering Karunya University MSME Tool Room As the developers of IOTIF trainer kit, we will provide you with end to end lab set up and faculty training on how to use the trainer kit. Our top technicians and developers will assist you with the training of the product with its applications on real-life problems. Also check Full Stack IoT Lab by Iotcart. It is currently on sale at a discounted price of Rs. 999,999, marked down from Rs. 1,500,000. The lab includes various components and modules for IoT and robotics development, such as ESP 32 modules, sensors, actuators, motors, 3D printer, smart home components, measurement instruments, and more On-Board Components of the IOTIF: The IOTIF training kit is integrated with state-of-the-art microcontrollers, development boards, Wi-Fi boards, Bluetooth modules and sensors that are compatible with each other. Raspberry Pi 5 8GB x 1 SD Card x 1 Nano Board compatible with Arduino x 1 PIR Sensor x 1 HCSR04 Ultrasonic Sensor x 1 DHT11 Sensor x 1 PS2 Joystick Module x 1 ESP8266 x 1 Bluetooth Module x 1 4 x 4 Membrane Keypad x 1 Relay Module x 1 Breadboard x 1 LED x 1 RGB LED x 1 16 x 2 LCD Module x 1 Stepper Motor x 1 Servo Motor x 1 Raspberry Pi 5 Active Cooler x 1 Here is a Demo to get a deeper understanding of the IOTIF Trainer Kit:

Iotcart-  Raspberry pi IOT kit helps you build your own smart devices. The Base Kit includes Raspberry pi, UNO and basic sensors and actuator which can help you start with Internet Of Things.

IOTIF Trainer and Prototype Board What is an IOTIF Trainer Kit? The IOTIF trainer kit is an electronic trainer kit consisting of three micro-controllers: Raspberry Pi 4B 1GB / Raspberry Pi 4B (with SD Card and pre-installed Raspbian OS), Arduino Nano and ESP-01; and a variety of sensors and actuators like Buzzer, LED, RGB LED, Relay, Ultrasonic sensor, Light Dependent Resistor (LDR),  Passive Infrared Sensor (PIR sensor), Humidity and Temperature sensor (DHT-11), Servo motor, Stepper motor, Bluetooth module (HC-05), Liquid crystal display (LCD), Joystick and a Membrane Keypad. How did the IOTIF Trainer Kit come into existence? The IOTIF trainer kit was a grand collaboration between TIF Labs and CISCO support team and was designed with the objective of spreading awareness among Professors and students on the importance and applications of IoT. In 2017, it was launched at the ‘CISCO Academy National Conference 2017’ held in India, after which TIF Labs kickstarted the manufacturing, supplying and wholesaling of the IOTIF starter kit to educational institutes and training facilities. The kit was highly appreciated by the dignitaries of CISCO and the Professors from all across the country. Why is IOTIF necessary for Engineering students? IOTIF Training and Prototype board was designed to bridge the gap between theoretical knowledge and practical implementation by simplifying the process and eliminating hassles of the hardware connection. The Trainer kit was designed by keeping in mind the current industry trends and standards and gives the user the best of both worlds, embedded system and IoT. IOTIF trainer kit would set up the perfect stage for the graduating engineers who are interested in developing IoT and embedded systems. This trainer kit is in sync with the latest industrial requirements, which improves the skill set of students and increases their employability. What makes IOTIF an integrated system of microcontrollers? The intercommunication of the Nano board and Raspberry Pi board with the different modules provides an integrated system and gives the IOTIF Trainer Kit an edge. For example; Nano Board can be integrated with ESP-01 to make it Wi-Fi enabled. On the other hand, Raspberry Pi can make use of its on-board WiFi module. The two modules can be programmed to interact with each other, servers and Cloud. Thanks to IoT, the data can be accessed using mobile apps or browser from any part of the world. IOTIF Trainer Kit Where is the IOTIF LAB set up in India? Since the objective of setting up the IOTIF Lab is to educate and train Professors on the subject on the Internet of Things, IOTIF Labs have been set up in various education institutes, Universities and Labs. Recently, IOTIF was set up in NBKR Institute of Science and Technology. Apart from this, the IOTIF Lab was also set up in the following institutes: Sona Institute of Technology Trident Academy of Technology Swarnandhra Institute of Engineering & Technology Gokhale Education Society's R. H. Sapat College of Engineering Karunya University MSME Tool Room As the developers of IOTIF trainer kit, we will provide you with end to end lab set up and faculty training on how to use the trainer kit. Our top technicians and developers will assist you with the training of the product with its applications on real-life problems. On-Board Components of the IOTIF: The IOTIF training kit is integrated with the state of the art microcontrollers, development boards, wifi boards, Bluetooth modules and sensors that are compatible with each other. Raspberry Pi 4B 1GB x 1 SD Card x 1 Nano Board compatible with Arduino x 1 PIR Sensor x 1 HCSR04 Ultrasonic Sensor x 1 DHT11 Sensor x 1 PS2 Joystick Module x 1 ESP8266 x 1 Bluetooth Module x 1 4 x 4 Membrane Keypad x 1 Relay Module x 1 Breadboard x 1 LED x 1 RGB LED x 1 16 x 2 LCD Module x 1 Stepper Motor x 1 Servo Motor x 1 Here is a Demo to get a deeper understanding of the IOTIF Trainer Kit:

IOTIF Trainer and Prototype Board What is an IOTIF Trainer Kit? The IOTIF trainer kit is an electronic trainer kit consisting of three micro-controllers: Raspberry Pi 5 4GB (with SD Card and pre-installed Raspbian OS), Arduino Nano and ESP-01; and a variety of sensors and actuators like Buzzer, LED, RGB LED, Relay, Ultrasonic sensor, Light Dependent Resistor (LDR),  Passive Infrared Sensor (PIR sensor), Humidity and Temperature sensor (DHT-11), Servo motor, Stepper motor, Bluetooth module (HC-05), Liquid crystal display (LCD), Joystick and a Membrane Keypad. How did the IOTIF Trainer Kit come into existence? The IOTIF trainer kit was a grand collaboration between TIF Labs and the CISCO support team and was designed with the objective of spreading awareness among Professors and students on the importance and applications of IoT. In 2017, it was launched at the ‘CISCO Academy National Conference 2017’ held in India, after which TIF Labs kickstarted the manufacturing, supplying and wholesaling of the IOTIF starter kit to educational institutes and training facilities. The kit was highly appreciated by the dignitaries of CISCO and the Professors from all across the country. Why is IOTIF necessary for Engineering students? IOTIF Training and Prototype board was designed to bridge the gap between theoretical knowledge and practical implementation by simplifying the process and eliminating the hassles of the hardware connection. The Trainer kit was designed by keeping in mind the current industry trends and standards and gives the user the best of both worlds, embedded systems and IoT. IOTIF trainer kit would set up the perfect stage for graduating engineers who are interested in developing IoT and embedded systems. This trainer kit is in sync with the latest industrial requirements, which improves the skill set of students and increases their employability. What makes IOTIF an integrated system of microcontrollers? The intercommunication of the Nano board and Raspberry Pi board with the different modules provides an integrated system and gives the IOTIF Trainer Kit an edge. For example; Nano Board can be integrated with ESP-01 to make it Wi-Fi enabled. On the other hand, Raspberry Pi can make use of its on-board WiFi module. The two modules can be programmed to interact with each other, servers and Cloud. Thanks to IoT, the data can be accessed using mobile apps or browsers from any part of the world. Where is the IOTIF LAB set up in India? Since the objective of setting up the IOTIF Lab is to educate and train Professors on the subject on the Internet of Things, IOTIF Labs have been set up in various education institutes, Universities and Labs. Recently, IOTIF was set up in NBKR Institute of Science and Technology. Apart from this, the IOTIF Lab was also set up in the following institutes: Sona Institute of Technology Trident Academy of Technology Swarnandhra Institute of Engineering & Technology Gokhale Education Society's R. H. Sapat College of Engineering Karunya University MSME Tool Room As the developers of IOTIF trainer kit, we will provide you with end to end lab set up and faculty training on how to use the trainer kit. Our top technicians and developers will assist you with the training of the product with its applications on real-life problems. Also check IOTIF - IOT Trainer Kit with Raspberry Pi 5 8GB by ROBOCRAZE. It is an electronic trainer kit designed for educational purposes, particularly for engineering students. The kit includes three microcontrollers: Raspberry Pi 5 8GB, Arduino Nano, and ESP-01, along with various sensors and actuators like a Buzzer, LED, Ultrasonic sensor, and more. On-Board Components of the IOTIF: The IOTIF training kit is integrated with state-of-the-art microcontrollers, development boards, Wi-Fi boards, Bluetooth modules and sensors that are compatible with each other. Raspberry Pi 5 4GB x 1 SD Card x 1 Nano Board compatible with Arduino x 1 PIR Sensor x 1 HCSR04 Ultrasonic Sensor x 1 DHT11 Sensor x 1 PS2 Joystick Module x 1 ESP8266 x 1 Bluetooth Module x 1 4 x 4 Membrane Keypad x 1 Relay Module x 1 Breadboard x 1 LED x 1 RGB LED x 1 16 x 2 LCD Module x 1 Stepper Motor x 1 Servo Motor x 1 Here is a Demo to get a deeper understanding of the IOTIF Trainer Kit:

IOTIF Trainer and Prototype Board What is an IOTIF Trainer Kit? The IOTIF trainer kit is an electronic trainer kit consisting of three micro-controllers: Raspberry Pi 3B / Raspberry Pi 4B (with SD Card and pre-installed Raspbian OS), Arduino Nano and ESP-01; and a variety of sensors and actuators like Buzzer, LED, RGB LED, Relay, Ultrasonic sensor, Light Dependent Resistor (LDR),  Passive Infrared Sensor (PIR sensor), Humidity and Temperature sensor (DHT-11), Servo motor, Stepper motor, Bluetooth module (HC-05), Liquid crystal display (LCD), Joystick and a Membrane Keypad. How did the IOTIF Trainer Kit come into existence? The IOTIF trainer kit was a grand collaboration between TIF Labs and CISCO support team and was designed with the objective of spreading awareness among Professors and students on the importance and applications of IoT. In 2017, it was launched at the ‘CISCO Academy National Conference 2017’ held in India, after which TIF Labs kickstarted the manufacturing, supplying and wholesaling of the IOTIF starter kit to educational institutes and training facilities. The kit was highly appreciated by the dignitaries of CISCO and the Professors from all across the country. Why is IOTIF necessary for Engineering students? IOTIF Training and Prototype board was designed to bridge the gap between theoretical knowledge and practical implementation by simplifying the process and eliminating hassles of the hardware connection. The Trainer kit was designed by keeping in mind the current industry trends and standards and gives the user the best of both worlds, embedded system and IoT. IOTIF trainer kit would set up the perfect stage for the graduating engineers who are interested in developing IoT and embedded systems. This trainer kit is in sync with the latest industrial requirements, which improves the skill set of students and increases their employability. What makes IOTIF an integrated system of microcontrollers? The intercommunication of the Nano board and Raspberry Pi board with the different modules provides an integrated system and gives the IOTIF Trainer Kit an edge. For example; Nano Board can be integrated with ESP-01 to make it Wi-Fi enabled. On the other hand, Raspberry Pi can make use of its on-board WiFi module. The two modules can be programmed to interact with each other, servers and Cloud. Thanks to IoT, the data can be accessed using mobile apps or browser from any part of the world. Where is the IOTIF LAB set up in India? Since the objective of setting up the IOTIF Lab is to educate and train Professors on the subject on the Internet of Things, IOTIF Labs have been set up in various education institutes, Universities and Labs. Recently, IOTIF was set up in NBKR Institute of Science and Technology. Apart from this, the IOTIF Lab was also set up in the following institutes: Sona Institute of Technology Trident Academy of Technology Swarnandhra Institute of Engineering & Technology Gokhale Education Society's R. H. Sapat College of Engineering Karunya University MSME Tool Room As the developers of IOTIF trainer kit, we will provide you with end to end lab set up and faculty training on how to use the trainer kit. Our top technicians and developers will assist you with the training of the product with its applications on real-life problems. Also  check IOTIF - IOT Trainer Kit with Raspberry Pi 5 4GB . On-Board Components of the IOTIF: The IOTIF training kit is integrated with the state of the art microcontrollers, development boards, wifi boards, Bluetooth modules and sensors that are compatible with each other. Raspberry Pi 4B x 1 SD Card x 1 Nano Board compatible with Arduino x 1 PIR Sensor x 1 HCSR04 Ultrasonic Sensor x 1 DHT11 Sensor x 1 PS2 Joystick Module x 1 ESP8266 x 1 Bluetooth Module x 1 4 x 4 Membrane Keypad x 1 Relay Module x 1 Breadboard x 1 LED x 1 RGB LED x 1 16 x 2 LCD Module x 1 Stepper Motor x 1 Servo Motor x 1 Applications Engineering Students and Hobbyists College Projects and Capstone Work STEM Learning Labs and Educational Institutes Makers, Startups, and Innovation Labs Faculty and IoT Trainers Comparison Table: IOTIF vs Other IoT Kits Feature / Kit IOTIF – IoT Trainer Kit with Pi 4B 4GB Pro-Range Raspberry Pi IoT/Automation Kit RPI IoT Trainer Kit Core Controllers Raspberry Pi 4B (4GB) + Arduino Nano + ESP-01 Compatible with Raspberry Pi 4 (board not included) Raspberry Pi Zero or RPI-based modular controller Sensors & Actuators PIR, DHT11, ultrasonic, LDR, relay, stepper, servo, keypad, Bluetooth, GSM, GPS, camera module, etc. Relays, ADC module, sensors, power module, camera interface, basic automation sensors Keypad, joystick, RS232/RS485, LCD/OLED, motor driver, WiFi/Bluetooth Connectivity Options WiFi, Bluetooth, Ethernet, Cloud (MQTT, Thingspeak, Blynk), USB, GPIO expansion WiFi (via Pi 4), GPIO-based control, basic relay connections WiFi, Bluetooth, RS232, RS485, Modbus, MQTT Programming Platforms Supported Python, C/C++, Node-RED, Arduino IDE, Thonny Python, Node-RED, C/C++ Python, MQTT tools, Modbus software, C Learning Focus IoT fundamentals, sensor integration, edge computing, embedded systems, automation, cloud connectivity Basic IoT automation and Raspberry Pi interfacing IoT communication protocols, industrial data exchange, Modbus/MQTT learning Documentation & Support Comprehensive manual, circuit diagrams, example codes, and online tutorials Basic project documentation and wiring guides Detailed training manual, lab exercises, industrial examples Complexity & Learning Curve High – suitable for advanced students and institutions Medium – ideal for beginners and DIY learners Medium-to-High – focused on protocol-level understanding Expandability Highly expandable with extra GPIO pins, sensor ports, and Arduino-Pi hybrid integration Limited expansion; relies on Raspberry Pi 4 capabilities Moderate – supports external RS485/IoT devices Durability & Build Quality Premium metal casing with organized wiring and labeling DIY-style, breadboard-based setup Professional training board with protected circuit design Project Examples Supported Smart home automation, weather station, IoT data logger, surveillance camera, industrial monitoring Basic smart light or fan control, simple IoT automation Industrial device monitoring, IoT data gateway, smart communication systems Best Suited For Engineering colleges, STEM labs, startups prototyping IoT systems Hobbyists, beginner IoT learners Technical institutions teaching IoT communication and networking IoT Project You Can Build with IOTIF - IOT Trainer Kit with Pi 4B 4GB Smart Home Automation System IoT Weather Monitoring Station Smart Agriculture System IoT-Based Security & Surveillance System Smart Energy Meter IoT Data Logger Industrial Equipment Monitoring Health Monitoring System Smart Parking System Environmental Pollution Monitoring IoT Door Access Control System Voice-Controlled Home Assistant IoT Streetlight Automation Smart Waste Management System IoT Water Level Monitoring Here is a Demo to get a deeper understanding of the IOTIF Trainer Kit:

Official Raspberry Pi 5 Desktop Kit without Board The Raspberry Pi 5 Desktop Kit is perfect for beginners, offering everything you need to get started. It includes a 27W USB-C PD Power Supply (EU), a Keyboard and Mouse in your chosen language, and a 32GB SD card with Raspberry OS Bookworm preinstalled. The kit also has two micro-HDMI cables for display connection and the Raspberry Pi Beginner’s Guide (5th Edition) to help you along the way. Additionally, the Raspberry Pi 5 kit comes with a Red-White Raspberry Pi 5 Case with a cooling fan and heat sink, a USB-C PD Power Supply (EU-White), and the US Layout Keyboard and Mouse for comfortable use. Everything you need for a smooth Raspberry Pi experience is included. Find the best Raspberry Pi 5 Kit for your setup. Key Features Complete starter kit with all essentials for beginners. Official Raspberry Pi 5 case in red-white with a cooling fan and heat sink. 27W USB-C PD power supply (EU version) for reliable power delivery. Official keyboard and mouse with a language-specific keyboard layout. Pre-installed 32GB SD card with Raspberry Pi OS Bookworm for easy setup. Two micro-HDMI cables for high-definition video output and network connectivity. Fifth edition of the Raspberry Pi Beginner’s Guide with step-by-step tutorials. Best Raspberry Pi 5 Accessories Kit.

Raspberry Pi4 2/4/8GB Model 4B Ultimate Kit The Raspberry Pi 4 2/4/8GB Ultimate kit includes the following components: Pi4 2/4/8GB Model 4B board, Pi case, Power Adapter (5V 3Amp Normal Charger/ Raspberry Pi Official), Heatsink, Fan, HDMI Cable, Ethernet Cable, 16/32/64 GB SD Card, Sensors and Manual. This kit can be used to replace your desktop PC. You can also set up a retro gaming Machine and build a Minecraft gamer server, control a robot, build a Stop Motion Camera and many more. Iotcart will always be available to solve your inquires over emails and be a part of your journey on innovation. We have a strong Tech-Support team to answer all your queries. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi 4 (2/4/8), GB Ultimate Kit, online from Iotcart at the comfort of your homes. Raspberry Pi 2/4/8GB Ultimate Kit includes: Raspberry Pi4 2/ 4/ 8GB x 1 Raspberry Pi 4 case x 1 Heatsink x 1 Cooling Fan x 1 HDMI to HDMI Cable x 1 HDMI to Micro HDMI Adapter x 1 32 GB Class-10 SD Card x 1 Ethernet Cable x 1 Proximity IR Sensor x 1 Buzzer Module x 1 Cool Stickers x 4

Raspberry Pi4 2GB Model B Ultimate Kit The Raspberry Pi 4 2GB Model B Ultimate kit includes the following components: Raspberry Pi4 2GB board, Pi case, Power Adapter, Heatsink, Fan, HDMI Cable, Ethernet Cable, 32GB SD Card, Sensors and Manual. This kit can be used to replace your desktop PC. You can also set up a retro gaming Machine and build a Minecraft gamer server, control a robot, build a Stop Motion Camera and many more. Iotcart will always be available to solve your inquires over emails and be a part of your journey on innovation. We have a strong Tech-Support team to answer all your queries. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi 4B 2GB Ultimate Kit online from Iotcart at the comfort of your homes. Note: Weight of the Package: 500 grams (approx) and Dimensions (approx): 22 x 15 x 5cms Ultimate Raspberry Pi 2GB Kit includes: Raspberry Pi4 2GB x 1 Raspberry Pi 4 case x 1 Heatsink x 1 Cooling Fan x 1 HDMI to HDMI Cable x 1 HDMI to Micro HDMI Adapter x 1 32GB Class-10 SD Card x 1 Ethernet Cable x 1 Proximity IR Sensor x 1 Buzzer Module x 1

Raspberry Pi4 4GB Model B Complete Kit The Raspberry Pi4 4GB Complete Kit is your ultimate gateway to the world of DIY electronics and programming. This comprehensive Raspberry Pi 4 model B kit includes everything you need to build and explore a wide range of projects. From home automation and IoT devices to retro gaming machines and multimedia centres, the possibilities are endless. With the power of Raspberry Pi4 4GB, you can now replace your desktop PC and enjoy smooth performance while multitasking or running resource-intensive applications. Shop the all-in-one Raspberry Pi 5 Kit now! Premium Components for Optimal Performance: Designed with performance and durability in mind, this complete Raspberry Pi 4 kit features a Raspberry Pi4 4GB board, which offers increased processing power and memory to handle complex tasks with ease. The metal case with fans ensures efficient cooling, allowing your Raspberry Pi to run at its best without any overheating issues. The included 32GB Class-10 SD card provides ample storage space for your projects, while the HDMI and Ethernet cables ensure seamless connectivity. The keyboard and mouse add convenience, making it easier to navigate and control your projects. Endless Possibilities, Easy Assembly: Whether you're a seasoned tinkerer or a curious beginner, the Raspberry Pi4 4GB Complete Kit caters to all skill levels. The kit comes with a detailed manual to guide you through the assembly process, making it a breeze to set up the Raspberry Pi. So, you can focus on what truly matters – unleashing your creativity and bringing your ideas to life. From building a Minecraft gaming server to creating your smart home automation system, this Raspberry Pi 4 kit with official accessories has got you covered. check out : Raspberry Pi IOT Kit Key Features: Enjoy smooth multitasking and complex task handling with the Raspberry Pi4 4GB board and premium components. Metal case with fans prevents overheating, ensuring continuous operation. HDMI and Ethernet cables provide easy setup and connectivity. Included keyboard and mouse to simplify navigation and project control. The detailed manual makes setup a breeze for all skill levels. From home automation to retro gaming, unleash your creativity with this comprehensive kit. Includes all necessary components for a smooth start, from Raspberry Pi 4 with 4GB RAM board to case and cables. Best DIY computer kit for learning and prototyping. Also check Raspberry Pi 4 4GB Starter Kit with Official 7 Inch Touch Display . Note: Weight of the Package: 500 grams (approx) and Dimensions (approx): 22 x 15 x 5cms Complete Raspberry Pi 4GB Kit includes: Raspberry Pi4 4GB x 1 Heatsink x 1 5V 3A ERD Power Adapter x 1 HDMI to Micro HDMI Cable x 1 Ethernet Cable x 1 32 GB Class-10 SD Card x 1 Raspberry pi case x 1

Raspberry Pi4 4GB Model B Ultimate Kit This Raspberry Pi4 4GB complete kit is all-inclusive package has been painstakingly crafted to provide both beginners and enthusiasts with all they need to get started in the fascinating world of Raspberry Pi. Why Choose Raspberry Pi4 4GB Kit? Replace Your Desktop PC – Powerful enough for everyday computing. Retro Gaming Machine – Enjoy classic games with ease. Minecraft Server – Host your own virtual world effortlessly. Versatile Components for Unlimited Projects This official Raspberry Pi 4 kit includes a 32GB Class-10 SD card, Raspberry Pi 4 (4GB) with a cooling fan & case, and Waveshare 3.5-inch Touchscreen Display. The 16x4 LCD Display and Magnetic Float Sensor FS37A add more project possibilities. Expertly Crafted Accessories Stay cool with the Metal Aluminum Case with Dual Fans, and enjoy crystal-clear visuals with a high-quality HDMI cable. Get started with the Raspberry Pi 4 4gb Bundle on your next big project today! Note: Weight of the Package: 500 grams (approx) and Dimensions (approx): 22 x 15 x 5cms