Cooling Fan DC 12V 3010 for 3D Printer The 12V 3010 Cooling Fan for 3D Printer is Small but powerful exhaust cooling is designed for the 3D printer . It has two pin connector to connect in a printer controller. DC Fan operates at 12V supply and operates automatically by the Printer controller system. It is used to mount on extruders to maintain the temperature of an extruder for seamless printing. This mini fan has the ability to run at a speed of 6800 ~ 13000 rpm. The body of the fan is built from a combination of resin and plastic material. The combination provides strength and insulation to the fan. Due to its manufacturing, It is light in weight and strong enough to bear some falls on the ground. So if you are looking for a perfect combination of strength and insulation in a single fan, then you are in the right place. Note : Image Shown may differ from actual product in term of the brand name. Features: Good airflow Noiseless Performance Very low Current consumption Easy to install and connect.

12V Brushless DC Fan 4010 This DC Brushless fan just needs to be powered up with a 12V power source. It has low current consumption and finds its application in a lot of projects like cooling Peltiers and heatsinks . It is high-temperature resistant and extremely durable. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs. Increased ventilation to keep the electronics components cool and performing at high efficiency. It can be used to maintain the temperature of the extruder in 3d printers . B earing is high precision, long life, and low noise. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs Also check out the full DC Fan Collections . Applications: Used for cooling Peltiers and heatsinks. Used in maintaining the temperature of the extruder in 3d printers

5V 4010 DC Fan This 5V 4010 DC fan featuring a brushless motor and sleeve bearing providing excellent reliability and improved performance. The dc fan is housed in a 40 x 40 x 10mm thermoplastic frame and is terminated using the wire leads.

8025 12V DC Cooling Fan This is a High-Quality 8025 cooling fan, which consists of a 4-pole Brushless DC Motor with a precise vapor bearing system, this cooling fan can deliver an airflow up to 8.0 CFM, which is sufficient enough to keep the electronics cool. This creates a vibrating and shaking of the rotating rotor is prevented. Since there is no contact between the bearing and shaft, the bearing touches the result is just the surrounding air. The result is the creation of a cooling fan with exceptional features such as a uniform rotation, low noise, and special durability to meet any requirement. Features: Good airflow Noiseless Performance Easy to install and connect. Also check 12V CPU cooling fan sold by Iotcart.  The fan is 80 x 80mm and has a ball bearing. It can be used in CPUs, incubators, and 3D printers.

24V DC 4020 Centrifugal Cooling Fan with XH2.54-2P 30CM Cable This 24V DC 4020 hydraulic centrifugal cooling fan is built with premium, high-temperature-resistant materials for exceptional durability. It’s perfect for cooling heat sinks on hot ends, 3D prints, and various other applications. The 24V DC 3D printer cooling fan is crafted from high-quality PBT reinforced with 30% glass fibre, along with VO and precision bearings, it delivers a long lifespan and low noise operation. This DC cooling fan is designed to manage temperatures up to 75°C, it operates optimally at 40°C and supports continuous 24-hour use. Features Best 35mm radial cooling fan. Operates at 24V DC with a 2-pin connector. Constructed from premium PBT reinforced with 30% glass fiber and VO. Features high-precision bearings for extended durability and quiet performance. Ideal for efficiently cooling heat sinks on hot ends, 3D prints, and other applications.

24v 0.15A Brushless DC Fan The 24v 0.15A Brushless DC Fan is a compact and reliable cooling solution designed for efficient airflow in electronics and industrial applications. This dc brushless fan 24v features a high-performance brushless motor that ensures low noise, reduced power consumption, and extended lifespan compared to traditional fans. Its centrifugal blower-style design directs air precisely where needed, making it perfect for 3D printers, control cabinets, power supplies, and embedded systems. With a 24V DC operating voltage and 0.15A current rating, it delivers consistent cooling performance while maintaining energy efficiency. Built with durable housing and easy mounting points, this fan is ideal for continuous operation environments. Features: Efficient cooling performance Stable 24V DC operation Low power consumption Quiet and smooth airflow Compact and space-saving design Durable brushless motor technology Easy installation and wiring Ideal for electronics and enclosure cooling

Jigo 12V 0.15A CPU Fan This is the Jigo 12V 0.15A CPU fan, This Dc cooling fan blow air along the axis of the fan or parallel to the track of the blade axis. Dc fans are found in a variety of applications, including computing, servers, telecommunication cabinets, and any type of equipment where the need for thermal control is necessary for the improved reliability and life extension of the components that are included in the system.

Fan 5015 12V 0.15A Sleeve Bearing Brushless Fan This is an easy-to-use Sleeve Bearing Brushless Mini Blower fan. It just needs to be powered by a 12V DC source. The blower fan increases the velocity of air. They are mainly used for exhausting, cooling, ventilating, etc. HE3D 12V DC 3D Printer Accessories 5015 Vortex Cooling Fan is made of special and premium materials. It is high-temperature resistant and extremely durable. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs. It is made of high-quality PBT + 30% glass line + VO and Bearing with high precision makes it provide long life and low noise. It can be taken in use to handle the temperature cooling  75?. Its Working temperature is 40? with a continuous working of 24 hours capacity. Additional applications include forced cooling of PCB & PCB Components, active cooling of the hot end extruder, and SBCs like Raspberry Pi, Beaglebone Black, etc. It can also be used in conjunction with a heatsink to improve cooling and provide better airflow. read more : Why are DC fans more efficient than AC? Applications: Cooling of PCB & PCB Components Cooling of the hot end extruder Cooling Raspberry Pi Boards

D80SH-12 8025 12V Cooling Fan Power Supply Cabinet The D80SH-12 8025 12V Cooling Fan Power Supply Cabinet powerful exhaust cooling is designed for the power supply or CPU cabinet. It has a two-pin connector to connect in a controller 12V output pin. This DC Fan operates at 12V supply and operates can automatically by the controller system. It is used for multipurpose application. Features: Good airflow Noiseless Performance Easy to install and connect.

The DIY Mini Wind Turbine Blade Set is a compact, vertical-axis wind turbine kit designed for educational, experimental, and small-scale renewable energy applications. Ideal for hobbyists, students, and engineers, this micro generator blade set enables hands-on learning about wind energy conversion and sustainable power generation. Each blade is precision-engineered for optimal aerodynamic efficiency at low wind speeds, making it perfect for indoor demonstrations or outdoor micro-generation setups. This set includes lightweight, durable blades compatible with most small DC generators and motors repurposed as generators. The vertical axis design ensures 360-degree wind capture, eliminating the need for yaw mechanisms and allowing operation from any wind direction. It's widely used in STEM education, science fairs, IoT energy harvesting prototypes, and off-grid sensor power systems. Easy to assemble and integrate, the kit supports experimentation with blade pitch, count, and generator coupling. Whether you're building a wind-powered charger, environmental monitoring station, or classroom demo, this turbine blade set offers a practical, low-cost entry into wind energy technology. Available for fast delivery across India.