iMax B6AC Smart Balance Charger 80W

7Semi MAX17048 LiPoly - LiIon  Battery Fuel Gauge Breakout Module The 7Semi MAX17048 LiPoly - LiIon  Battery Fuel Gauge Breakout Module is a reliable and easy-to-use battery fuel gauge module built for accurate monitoring of single-cell lithium batteries. Using the MAX17048 IC, this single-cell lithium battery monitor delivers precise state-of-charge and voltage measurements without the need for a current-sense resistor, simplifying circuit design. With its I2C interface, the board integrates smoothly with microcontrollers, making it perfect for real-time battery tracking in portable devices, IoT applications, and DIY electronics projects. Features: MAX17048-based battery fuel gauge module for accurate SoC measurement Supports Li-Ion and Li-Poly single-cell lithium battery monitoring No current-sense resistor required for simplified design I2C communication for easy microcontroller integration Compact breakout board suitable for portable and IoT projects Benefits: Streamline your process: Avoid project delays and time-consuming guesswork with instantaneous battery % monitoring. For seamless and effective operations, know precisely when it's time to recharge. Advanced surveillance without the trouble: These intricate battery calculations are handled by the sophisticated MAX17048 microcontroller, which provides you with extremely precise data without requiring any programming or analysis on your behalf. All-purpose compatibility for every project: Whether you're using Arduino, Raspberry Pi, or other well-known microcontrollers, you can easily incorporate this board into your configurations. For optimal versatility across many systems, it supports both 3.3V and 5.0V logic levels. Optimize battery life by tailoring low-power modes and alarms to your specific project requirements, making the most of your LiPo batteries for extended runtimes. Go beyond simple voltage measurements: The MAX17048 offers a reliable, real-time state-of-charge percentage, so you can learn the truth about the condition of your battery.

7Semi DC Buck Converter Breakout 3.8V 2A Out (AP62301) (BO-10132) The 7Semi DC Buck Converter Breakout 3.8V 2A Out (AP62301) (BO-10132) is a compact power module designed to step down higher DC voltages to a stable 3.8V output with up to 2A current. It supports a wide input voltage range, making it suitable for use with batteries, adapters, and other DC power sources in low-voltage electronics. Built on an efficient synchronous buck converter design, this module delivers reliable power with minimal heat and energy loss. Its small size makes it ideal for space-constrained projects such as IoT devices, embedded systems, and portable electronics. Whether you’re prototyping or building a final product, this buck converter offers a simple and dependable power solution. Features: Provides stable 3.8V output at up to 2A continuous current Accepts a wide DC input range for flexible power sources High-efficiency synchronous buck converter design Low heat generation for efficient power use Compact breakout board for easy integration Ideal for IoT, battery-powered, and embedded electronics Suitable for microcontrollers, sensors, and small devices

AA 4-Cell Battery Holder – Hard Plastic 6V Battery Case with Wire Leads This AA 4-Cell Battery Holder is a durable and reliable power solution designed to securely hold four AA batteries and deliver a stable 6V output. Built from high-quality hard plastic, it ensures long-lasting performance and is ideal for DIY electronics, school projects, robotics, LED circuits, Arduino-based builds, and small hobby devices. Its compact size and lightweight design make it easy to integrate into any enclosure or prototype. The holder includes pre-attached wire leads, making soldering or connecting to breadboards fast and convenient. Whether you're assembling a small electronic project, building battery-powered gadgets, or replacing a damaged battery case in a device, this 4-cell AA battery holder provides a dependable and easy-to-use power source. Its secure cell grip keeps the batteries firmly in place, preventing loose connections during operation. Features: Holds 4 AA batteries, providing a stable 6V DC output for electronics and DIY projects. Built with hard, durable plastic to ensure long-term reliability and secure battery placement. Comes with pre-soldered wire leads for easy connection to Arduino, breadboards, or circuits. Lightweight and compact design makes it suitable for robotics, small appliances, and prototyping. Provides firm battery retention to avoid shaking or disconnection during movement or vibration. Ideal for hobbyists, students, and makers working on low-voltage portable power applications.

1200mAh AAA Rechargeable Battery 1.2V (Pack of 2) The OSLETECH AAA Rechargeable Batteries combine efficiency, effectiveness, and environmental friendliness in the ideal balance. This pair of globally recognized and broadly compatible Ni-Mh batteries are fully charged and ready to use right out of the package. Boasting an industry-leading 1200mAh capacity, these batteries offer over 500 charge cycles and feature a no-memory effect, allowing them to be charged and discharged as needed without losing capacity. These batteries also support quick charging via any smart or quick charger. These OSLETECH 1200mAh Rechargeable AAA Batteries are also designed for Rechargeable and reusable with the environment in mind. These batteries are made in India products and the smart choice for sustainable energy. Key Features: Cost-effective with many recharge cycles. NiMH chemistry for balanced performance. Fits various devices. Available in different mAh ratings. Rated at 1.2 volts for broad compatibility. Charging time varies by charger. Applications: Remote controls Digital cameras Wireless computer accessories Compact flashlights Portable audio devices Toys Clocks Calculators Handheld gaming devices Medical devices

Dual Micro USB 18650 LiPo DIY Power Bank Module (3.7V to 5V, 2A Output) The Dual Micro USB 18650 LiPo DIY Power Bank Module is designed to convert a 3.7V 18650 lithium battery into a stable 5V output with up to 2A current, making it perfect for charging smartphones, IoT devices, and other USB-powered gadgets. At its core, this module functions as a compact power management and boost conversion board, allowing you to build a fully customized portable power bank. It features dual Micro USB ports for convenient charging and integrated LED indicators to display charging and power status. Ideal for DIY enthusiasts, makers, and electronics hobbyists, this board gives you the flexibility to create your own reliable mobile power solution—provided you have basic electronic assembly knowledge. When installing items, it is important to keep the following in mind: Batteries can be connected in parallel with a voltage ranging from 3.2 to 4.2V, including 18650 flat and polymer batteries. We can connect the battery to the motherboard B + negative-, which is installed against the burning motherboard. Batteries that are new and old, or that have contradictory model brands, cannot be mixed. Features: Four-level LED bulb displays power, not working situation intelligent automated shutdown. The built-in lithium battery protection IC, overcurrent, overpressure, and undervoltage protection Dual USB output ports. Input requirements: 5V constant voltage power supply can charge input power, the most matching charger for 5V 1A or above. Requirements for rechargeable batteries: Compatible batteries include 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, and polymer lithium batteries ranging from 3.7V to 4.2V.

7Semi DC Buck Converter Breakout 3.3V 2A Out (AP62301) (BO-10131) The 7Semi DC Buck Converter Breakout 3.3V 2A Out (AP62301) is a compact power module that converts higher DC voltages into a stable 3.3V output with up to 2A current. It accepts a wide range of input voltages, making it useful for powering low-voltage electronics from batteries, adapters, and other DC sources. This makes it ideal for projects that require a reliable 3.3V supply. Built using an efficient synchronous buck converter design, this board delivers dependable power with minimal energy loss and low heat output. The small form factor allows easy integration into your electronics builds, especially space-constrained and portable systems. Whether you’re working on IoT devices, embedded controllers, or sensor systems, this converter provides a simple and efficient power solution for your 3.3V needs. Features: Provides a stable 3.3V output with up to 2A continuous current Accepts a wide DC input voltage range for flexible power sources High-efficiency synchronous buck converter design Low heat generation for efficient and safe power delivery Compact breakout board for easy integration and prototyping Ideal for IoT devices, embedded systems, and battery-powered projects Suitable for powering microcontrollers, sensors, and communication modules

3V CR2025 Lithium Coin Battery The CR2032 3V Lithium Coin Battery is widely utilized due to its dependable and long-lasting power supply for a variety of small electronic devices. This cr2032 battery includes calculators, wristwatches, remote controls, various medical devices, fitness gadgets, machines, toys, and others. Featuring a flat top and a 225mAh capacity, the cr2032 battery is a 3V lithium coin battery that's specifically designed for use in miniaturized products. Its plus terminal utilizes manganese dioxide, which is chemically stable, resulting in 90% capacity retention even after a decade of proper storage. Additionally, The battery organic electrolytes are resistant to leakage when exposed to environmental changes. Features High and Stable voltage (3V) A full lineup for use in a wide variety of applications No mercury added Useful in a wide range of temperatures (-30°C to +60°C) The very high weight-to-power ratio Manganese dioxide material High capacity Long Lasting life. Low self-degradation rate and superior storability 0.2mA continuous standard drain High leak protection and hence no oxidation damage in devices, so it can be used in any expensive Gadget with superior safety. Resistance to continuous discharge and hence Very low self-discharge; Note: These batteries are Non-Rechargeable. ?Also check 24mm Coin type battery holder available on the Iotcart website. The holder is versatile, accommodating various sizes and shapes of coin cells, with a secure design to withstand shock and vibration. It operates at a voltage rating of 3.3V and finds applications in portable devices, computers, consumer electronics, power management, commercial, and security.

7Semi DC-DC Buck Converter 7V-40V Input to 5V 5A Output- AP64500 (BO-10188) The 7Semi DC-DC Buck Converter 7V–40V Input to 5V 5A Output – AP64500 (BO-10188) is a high-power voltage regulator module designed to convert higher DC input voltages into a stable 5V output with up to 5A current. Its wide input range makes it suitable for many power sources, including batteries and industrial supplies, where reliable 5V power is needed. Built around the efficient AP64500 synchronous buck converter, this module delivers stable output with low heat and high efficiency, even under heavy load. It is well suited for powering microcontrollers, single-board computers, sensors, and communication modules. Whether you’re building robotics, automation systems, or advanced electronics projects, this buck converter provides dependable and efficient power management. Features: Wide input voltage range: 7V to 40V DC Stable 5V output with up to 5A continuous current High-efficiency synchronous buck converter using AP64500 Low thermal loss and reliable performance under load Compact breakout module for easy project integration Built-in power protection features for safe operation Ideal for microcontrollers, SBCs, IoT and embedded systems Suitable for robotics, automation, and power supply projects

SmartElex 3.7V Basic micro-USB LiPo Charger -500mA The SmartElex 3.7V Basic microUSB LiPo Charger – 500mA is a compact and efficient solution for charging single-cell 3.7V LiPo and Li-Ion batteries. This reliable micro-USB LiPo charger delivers a fixed 500mA charging current, ensuring safe and consistent charging without complex setup. Featuring a micro-USB input, onboard status LED, and a JST battery connector, it allows easy integration into battery-powered and space-constrained projects. This LiPo charger is perfectly suited for embedded applications, DIY electronics, and portable devices where dependable and compact charging is essential. Features: Charges 3.7V single-cell LiPo and LiIon batteries. The charge rate is fixed at 500mA to ensure effective charging. A micro-USB port allows for convenient power input. JST connector for battery hookup. The status LED indicates the charging progress. The compact form factor includes a mounting hole for convenient installation.

7Semi DC Buck Converter Breakout 5V 2A Out (AP62301) (BO-10133) The 7Semi DC Buck Converter Breakout 5V 2A Out (AP62301) is a small power module that converts higher DC input voltages into a steady 5V output with up to 2A current. It allows you to power 5V-based electronics from a wide range of DC power sources such as batteries and adapters. This makes it perfect for projects that need a reliable 5V supply. Built with an efficient synchronous buck converter design, this module delivers stable power while keeping energy loss and heat to a minimum. Its compact size makes it easy to add to space-limited electronics projects like IoT devices, microcontroller boards, and portable systems. Whether you’re building sensors, development boards, or embedded systems, this buck converter gives you a simple and dependable way to get 5V power. Features: Provides a stable 5V output with up to 2A continuous current Accepts a wide range of DC input voltages for flexible power sources Efficient synchronous buck converter design for low power loss Low heat generation for cool and reliable operation Compact breakout board for easy integration and prototyping Ideal for powering 5V microcontrollers, sensors, and IoT devices Perfect for embedded systems, portable electronics, and hobby projects

SmartElex Single Cell MPPT Solar Charger for LiPo Battery SmartElex Single Cell MPPT Solar Charger for LiPo Battery is designed to efficiently charge a single-cell LiPo battery using solar panels by extracting maximum power under varying sunlight conditions. This MPPT solar charger uses Maximum Power Point Tracking to optimize solar energy harvesting, making it a practical choice for students, hobbyists, engineers, educators, and startups working on renewable energy systems or off-grid electronics. It helps solve the common issue of inconsistent solar charging by maintaining stable charging performance even when light levels fluctuate. This solar LiPo charger module integrates easily with microcontroller platforms like Arduino, Raspberry Pi, and ESP32, making it suitable for IoT devices, autonomous sensor nodes, outdoor robots, and portable energy projects. It is ideal for prototyping solar-powered systems, automation setups, and remote monitoring applications where reliable charging is essential. With its compact size and stable charging algorithm, it provides a dependable foundation for building energy-efficient and self-sustaining electronics powered directly by the sun. Features: MPPT charging algorithm for maximum solar energy utilization Designed for charging single-cell LiPo batteries from solar panels Maintains stable charging even with fluctuating sunlight Ideal for off-grid and renewable energy-based electronics Compatible with Arduino, Raspberry Pi, ESP32, and IoT devices Compact module for portable, outdoor, and self-sustaining projects

SmartElex 5V 1A LiPo Charger Booster Module The SmartElex 5V 1A LiPo Charger Booster Module is a compact and reliable LiPo charger booster designed to generate a stable 5V output at up to 1A from a Lithium Polymer battery. It combines an MCP73831-based lipo battery charger with a PAM2401 boost converter, ensuring efficient charging and voltage boosting in a single board. The module intelligently draws higher current at lower input voltages, allowing fast energy transfer and strong output performance. With built-in protection diodes, multiple connection options, and clear LED status indicators, this module is ideal for DIY electronics, IoT devices, and portable embedded systems. For higher voltage requirements, multiple boards can be daisy-chained to achieve increased output levels without complexity. Features: The PAM2401 IC provides 1A at 5V from a LiPo battery. Includes protective diodes for multi-cell configurations. Quick charging and efficient power boost. Compatible with a variety of battery and charger connection types. Two status LEDs provide system feedback. Ideal for applications that require compact, high-power. Can be daisy-chained to get greater output voltages.

Holybro PM07 Power Module (14S) The Holybro PM07 Power Module (14S) is a robust and reliable power module designed to deliver clean, regulated power to your drone’s flight controller and onboard electronics, supporting up to 14-cell LiPo battery configurations. Engineered for high-current UAV applications, this module provides accurate real-time voltage and current monitoring, helping ensure safe operation while protecting sensitive components from electrical faults. Its efficient power delivery and dependable performance make it an essential component for advanced drone builds and professional UAV platforms. Built to simplify wiring and enhance system reliability, the Holybro PM07 Power Module integrates seamlessly with popular flight controllers, reducing clutter and improving overall power management. Whether you’re developing high-performance multirotor drones, autonomous platforms, or research UAVs, this power module offers consistent energy supply, precise monitoring, and improved safety for extended flight operations, giving you confidence in both performance and durability. Please Note: The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference. This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X & 6X (Requires a digital PM like PM02D). Features: High-capacity power module designed to support up to 14S LiPo batteries for advanced UAV applications. Delivers clean and stable power to flight controllers and onboard electronics. Provides accurate real-time voltage and current sensing for improved flight safety. Built for high-current handling in professional and heavy-lift drone platforms. Reduces wiring complexity with an integrated power and monitoring solution. Ideal for multirotor drones, autonomous UAVs, and research-grade aerial systems.

CHAM CMINR14500F2 1000mAh 2C 3.6V AA Rechargeable Li-ion Battery Introducing the CHAM CMINR14500F2 rechargeable Li-ion battery – a compact, single-cell AA-sized power source delivering 3.6 volts at 1000mAh. Designed for projects that require a reliable 3.76V high-capacity supply, this battery is perfect for powering portable devices such as flashlights, hobby transmitters, and receivers. This Li-ion battery also serves as an excellent replacement for standard non-rechargeable AA batteries, making it a cost-effective and efficient option for applications like RC transmitter/receiver remotes. The versatile lithium ion battery terminals are compatible with many adapters or holders, or they can be permanently soldered to your device’s wiring for seamless integration. Important Guidelines: Avoid Deep Discharge: Do not let the Li-ion battery drop below 2.5V under load. Initial Charge: Fully charge to 4.2V before the first use. Metal and Magnets: Keep any metal moving parts or magnets away from both the positive (top) and negative (bottom) contacts. Proper Installation: Never force the battery into its compartment. Battery Pairing: Do not mix old and new battery cells. Charger Quality: Always use a reliable, high-quality battery charger. Heat Exposure: Keep the battery away from high temperatures. Prevent Short-Circuiting: Avoid connecting the positive (top) and negative (bottom) terminals directly. Safe Storage: When not in use, store the battery in its plastic holder or another insulating container. Charging Voltage: Do not exceed 4.22V during charging—this is another reason to choose a quality charger. Supervised Charging: Never leave the battery charging unattended. Long-Term Storage: Do not store the battery fully charged for extended periods. Optimal Storage Conditions: Store in a cool, dry place at about 3.7V (the recommended storage charge). Post-Discharge Care: Recharge the battery as soon as possible after it has been discharged. User Knowledge: Ensure you are well-informed about proper Li-ion battery discharging, charging, assembly, handling, and storage before use. Features Form Factor: Cylindrical Battery Type: Lithium-Ion Performance: High efficiency with substantial capacity Design Feature: Flat top for compatibility with a wide range of devices

AA Zinc Panasonic Special Battery The Panasonic AA Zinc Special Battery is an affordable and dependable power source designed for everyday low-drain devices. Made with Panasonic’s trusted build quality, this zinc-carbon AA cell delivers consistent output for home and office essentials like wall clocks, TV remotes, torches, toys, and basic electronic gadgets. Perfect for users who need a cost-effective battery for regular use, it provides stable performance, a good shelf life, and easy installation. This makes it a practical choice for households, students, small businesses, and hobby enthusiasts who want reliable power without the high cost of premium batteries. Features: Zinc-carbon chemistry for economical, everyday use Designed for low-drain household and office devices Stable power output for clocks, remotes, toys, and torches Lightweight and easy to install in AA-compatible gadgets Reliable build quality from Panasonic for consistent performance Long shelf life for storage and backup power needs