3.7v 2500mah 18650 Li-Ion Battery

Cytron PS2 Shield for Arduino The Cytron PS2 Shield is a compact and reliable PS2 controller interface designed for Arduino boards, making remote control projects smoother and far more intuitive. Whether you're working with an Arduino Uno, Mega, Leonardo, or other compatible boards, this shield lets you easily integrate a wired or wireless PS2 controller into your robotics, DIY RC projects, or gaming-inspired builds. With simple UART communication and a plug-and-play connector, reading joystick inputs and button states becomes effortless, even for beginners. Built with developers and hobbyists in mind, the Cytron PS2 Shield provides flexible UART selection options, stackable headers for adding more shields, and support for vibration motors on PS2 controllers. Because it draws power directly from the Arduino board, setup stays clutter-free. This PS2 Shield is perfect for anyone looking to add remote control, robotics maneuvering, or wireless navigation to their Arduino-based projects using a familiar PS2 controller format. Features: Provides an easy and reliable interface for connecting wired or wireless PS2 controllers to Arduino boards. Supports multiple Arduino models including UNO, Mega, Leonardo, and other pin-compatible variants. Simple UART-based communication allows effortless reading of joystick and button states. Integrated support for controlling the PS2 controller’s vibration motor for enhanced feedback. Stackable headers enable additional shields to be mounted above the PS2 Shield without conflict. Jumper-based selection for baud rates (9600, 57600, 115200) and configurable UART TX/RX pins. Fully powered from the Arduino main board with low current consumption. Includes status LED and reset control via Arduino A1 pin for convenient operation.

SmartElex 12V 3A 8 Channel Signal Relay Module The SmartElex 12V 3A 8 Channel Signal Relay Module is a reliable control solution designed to switch multiple electrical devices using low-power control signals. It allows users to safely manage higher-voltage or higher-current loads without directly connecting them to sensitive control circuits. This module is suitable for students, makers, engineers, educators, and startups working on embedded systems, automation projects, and control applications that require dependable multi-channel switching. This 8-channel relay module is ideal for robotics, IoT systems, home and industrial automation, and advanced prototyping where several devices need to be controlled independently. It can be easily interfaced with popular platforms such as Arduino, Raspberry Pi, and ESP32 to control lights, motors, pumps, relays, or other external equipment. The straightforward design and consistent performance make it easy to integrate into both experimental setups and finished products, supporting safe and efficient control across a wide range of applications. Features: 8-channel relay module for controlling multiple devices independently Operates on 12V, suitable for automation and control systems Supports up to 3A load current per relay channel Electrical isolation between control signals and load circuits Compatible with Arduino, Raspberry Pi, ESP32, and other controllers Compact board design with LED indicators for channel status

SmartElex MicroB USB Breakout Board The SmartElex MicroB USB Breakout Board is a compact adapter board designed to make it easy to access the pins of a Micro-B USB connector for prototyping, development, and testing. It breaks out the USB port into simple pin headers, allowing users to interface USB power and data lines with custom circuits, breadboards, and microcontroller boards. This USB breakout board is ideal for students, makers, educators, and engineers who need a quick and reliable way to add USB connectivity to their electronics projects without designing a custom PCB. This board is commonly used in robotics, IoT applications, embedded system development, device repair, and hardware prototyping where USB access is required for powering circuits or transferring data. It works smoothly with platforms like Arduino, Raspberry Pi, and ESP32, enabling fast integration with both beginner and advanced projects. With its straightforward layout and sturdy connector design, the SmartElex MicroB USB Breakout Board is a practical and efficient choice for workshops, prototyping labs, and DIY electronic builds that require stable Micro-B USB interfacing Features: Micro-B USB connector broken out to easy-to-use header pins Simplifies USB power and data access for prototyping and testing Supports quick integration with breadboards and custom circuits Compatible with Arduino, Raspberry Pi, ESP32, and microcontrollers Ideal for DIY repairs, IoT projects, and embedded hardware development Compact and beginner-friendly design for rapid project setup

7Semi DC Buck Converter Breakout 3.8V 2A Out (AP62301) (BO-10132) The 7Semi DC Buck Converter Breakout 3.8V 2A Out (AP62301) (BO-10132) is a compact power module designed to step down higher DC voltages to a stable 3.8V output with up to 2A current. It supports a wide input voltage range, making it suitable for use with batteries, adapters, and other DC power sources in low-voltage electronics. Built on an efficient synchronous buck converter design, this module delivers reliable power with minimal heat and energy loss. Its small size makes it ideal for space-constrained projects such as IoT devices, embedded systems, and portable electronics. Whether you’re prototyping or building a final product, this buck converter offers a simple and dependable power solution. Features: Provides stable 3.8V output at up to 2A continuous current Accepts a wide DC input range for flexible power sources High-efficiency synchronous buck converter design Low heat generation for efficient power use Compact breakout board for easy integration Ideal for IoT, battery-powered, and embedded electronics Suitable for microcontrollers, sensors, and small devices

SmartElex 8 Channel Multiplexer Breakout Module – (74HC4051) The SmartElex 8 Channel Multiplexer Breakout Module (74HC4051) is a compact and efficient solution for expanding input and output options in electronic projects. This 74HC4051 multiplexer breakout allows users to route multiple signals through a single microcontroller pin, solving the problem of limited I/O availability when working with sensors, switches, or analog inputs. It is designed for students, makers, engineers, educators, and startups who need a practical way to manage multiple device connections without increasing hardware complexity. This module acts as both an 8 channel multiplexer and demultiplexer, making it suitable for robotics, IoT systems, automation tasks, and rapid prototyping. It integrates smoothly with Arduino, Raspberry Pi, ESP32, and similar platforms, enabling users to scale projects without sacrificing performance or stability. Whether you are building sensor hubs, data acquisition systems, or experimenting with signal routing, this multiplexer demultiplexer module offers a reliable and easy-to-use interface that enhances flexibility in circuit design. Features: Based on the 74HC4051 8-channel analog/digital multiplexer IC Expands I/O by routing up to 8 signals through a single control interface Works as both a multiplexer and demultiplexer for flexible signal routing Helps manage limited microcontroller pins in multi-sensor projects Compatible with Arduino, Raspberry Pi, ESP32, and similar platforms Ideal for robotics, IoT systems, data acquisition, and prototyping

Holybro PM07 Power Module (14S) The Holybro PM07 Power Module (14S) is a robust and reliable power module designed to deliver clean, regulated power to your drone’s flight controller and onboard electronics, supporting up to 14-cell LiPo battery configurations. Engineered for high-current UAV applications, this module provides accurate real-time voltage and current monitoring, helping ensure safe operation while protecting sensitive components from electrical faults. Its efficient power delivery and dependable performance make it an essential component for advanced drone builds and professional UAV platforms. Built to simplify wiring and enhance system reliability, the Holybro PM07 Power Module integrates seamlessly with popular flight controllers, reducing clutter and improving overall power management. Whether you’re developing high-performance multirotor drones, autonomous platforms, or research UAVs, this power module offers consistent energy supply, precise monitoring, and improved safety for extended flight operations, giving you confidence in both performance and durability. Please Note: The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference. This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X & 6X (Requires a digital PM like PM02D). Features: High-capacity power module designed to support up to 14S LiPo batteries for advanced UAV applications. Delivers clean and stable power to flight controllers and onboard electronics. Provides accurate real-time voltage and current sensing for improved flight safety. Built for high-current handling in professional and heavy-lift drone platforms. Reduces wiring complexity with an integrated power and monitoring solution. Ideal for multirotor drones, autonomous UAVs, and research-grade aerial systems.

7Semi Vikram-3025 High-Power 25A DC Motor Driver for 6–30V Motors The 7Semi Vikram-3025 is a heavy-duty single-channel DC motor driver built for demanding robotics, automation, and mechatronics projects. Designed to handle 25A continuous load with a 6V–30V operating range, it uses a high-efficiency discrete NMOS H-Bridge that eliminates the need for bulky heat sinks. Whether you're powering high-torque DC motors or creating reliable industrial controls, this driver ensures stable, smooth, and responsive performance. With built-in safety features like overcurrent protection, temperature protection, and undervoltage shutdown, your system stays secure even under heavy loads. This motor driver goes beyond basic control, it includes onboard test buttons, motor output LEDs, and a regulated 5V output for powering microcontrollers, making prototyping extremely convenient. It supports PWM/DIR control signals from a wide range of logic voltages (1.8V to 30V), ensuring compatibility with Arduino, Raspberry Pi, PLCs, and other controllers. It also offers manual control options using a potentiometer and switch, giving both beginners and advanced users flexible control in real-world applications. This makes it a dependable choice for custom robotics, high-power motor control, and automation systems. Features: Provides smooth and reliable bidirectional control for single brushed DC motors. Supports a wide operating voltage range from 6V to 30V for flexible motor compatibility. Handles a continuous motor current of 25A, ideal for high-load or high-torque applications. Includes an onboard 5V regulated output (250mA) to power a microcontroller without an external supply. Onboard test buttons and motor state LEDs allow quick, controller-free testing during prototyping. Offers dual input modes: PWM/DIR for digital control or potentiometer/switch for manual operation. Compatible with 1.8V, 3.3V, 5V, 12V, and 24V logic, making it suitable for Arduino, Raspberry Pi, PLCs, and more. Supports PWM input frequency up to 40kHz with a fixed 16kHz output for quiet motor operation. Built-in protections include active current limiting, overcurrent protection, temperature protection, and undervoltage shutdown.

CHAM CMINR14500F2 1000mAh 2C 3.6V AA Rechargeable Li-ion Battery Introducing the CHAM CMINR14500F2 rechargeable Li-ion battery – a compact, single-cell AA-sized power source delivering 3.6 volts at 1000mAh. Designed for projects that require a reliable 3.76V high-capacity supply, this battery is perfect for powering portable devices such as flashlights, hobby transmitters, and receivers. This Li-ion battery also serves as an excellent replacement for standard non-rechargeable AA batteries, making it a cost-effective and efficient option for applications like RC transmitter/receiver remotes. The versatile lithium ion battery terminals are compatible with many adapters or holders, or they can be permanently soldered to your device’s wiring for seamless integration. Important Guidelines: Avoid Deep Discharge: Do not let the Li-ion battery drop below 2.5V under load. Initial Charge: Fully charge to 4.2V before the first use. Metal and Magnets: Keep any metal moving parts or magnets away from both the positive (top) and negative (bottom) contacts. Proper Installation: Never force the battery into its compartment. Battery Pairing: Do not mix old and new battery cells. Charger Quality: Always use a reliable, high-quality battery charger. Heat Exposure: Keep the battery away from high temperatures. Prevent Short-Circuiting: Avoid connecting the positive (top) and negative (bottom) terminals directly. Safe Storage: When not in use, store the battery in its plastic holder or another insulating container. Charging Voltage: Do not exceed 4.22V during charging—this is another reason to choose a quality charger. Supervised Charging: Never leave the battery charging unattended. Long-Term Storage: Do not store the battery fully charged for extended periods. Optimal Storage Conditions: Store in a cool, dry place at about 3.7V (the recommended storage charge). Post-Discharge Care: Recharge the battery as soon as possible after it has been discharged. User Knowledge: Ensure you are well-informed about proper Li-ion battery discharging, charging, assembly, handling, and storage before use. Features Form Factor: Cylindrical Battery Type: Lithium-Ion Performance: High efficiency with substantial capacity Design Feature: Flat top for compatibility with a wide range of devices

7Semi MCP9808 I2C Temperature Sensor Breakout The 7Semi MCP9808 I2C Temperature Sensor Breakout is a precision I2C temperature sensor module designed to deliver accurate and reliable temperature measurements with minimal effort. Built around the high-accuracy MCP9808 temperature sensor IC, this breakout board provides easy digital temperature sensing through a standard I2C interface, making it ideal for projects where precise environmental monitoring is essential. It solves the challenge of interfacing analog temperature sensors with microcontrollers by offering a simple digital communication method that eliminates the need for complex calibration. This compact sensor module is highly compatible with popular development platforms like Arduino, Raspberry Pi, and other microcontrollers, offering stable performance and low power consumption. With its high accuracy and straightforward interface, it’s perfect for students, hobbyists, and professionals working on weather stations, HVAC systems, data loggers, thermal control systems, and indoor environmental monitoring projects. Its robust design ensures dependable readings across a wide range of applications, reducing development time and improving overall system reliability. Features: High-accuracy MCP9808 sensor IC with ±0.25 °C typical precision Wide operating temperature range from –40 °C to +125 °C High-resolution temperature readings with 0.0625 °C resolution Supports 2.7V to 5.5V power and logic levels for flexible compatibility I²C interface allows connection of up to 8 sensors on a single bus Compact breakout board for easy integration in embedded projects

AA Zinc Panasonic Special Battery The Panasonic AA Zinc Special Battery is an affordable and dependable power source designed for everyday low-drain devices. Made with Panasonic’s trusted build quality, this zinc-carbon AA cell delivers consistent output for home and office essentials like wall clocks, TV remotes, torches, toys, and basic electronic gadgets. Perfect for users who need a cost-effective battery for regular use, it provides stable performance, a good shelf life, and easy installation. This makes it a practical choice for households, students, small businesses, and hobby enthusiasts who want reliable power without the high cost of premium batteries. Features: Zinc-carbon chemistry for economical, everyday use Designed for low-drain household and office devices Stable power output for clocks, remotes, toys, and torches Lightweight and easy to install in AA-compatible gadgets Reliable build quality from Panasonic for consistent performance Long shelf life for storage and backup power needs

SmartElex Rotation Sensor The SmartElex Rotation Sensor is a digital sensing module designed to detect rotational movement and direction using quadrature output signals. It helps measure rotation accurately without complex mechanical setups, making it useful for tracking motion, speed, or position in electronic systems. This sensor is suitable for students, makers, engineers, educators, and startups who are working on electronics, robotics learning projects, or prototypes that require reliable rotation detection. This rotation sensor is widely used in robotics, automation systems, and IoT projects where monitoring wheel rotation, motor movement, or shaft position is essential. It can be easily interfaced with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing quick integration into both experimental and functional setups. Common applications include robot wheel encoders, speed measurement systems, user input controls, and motion-based automation projects, where consistent output and simple integration help streamline development. Note: Refer to User Manual in the ATTACHMENTS section for more info. regd. the product. Features: Digital rotation detection sensor with quadrature output Detects rotational movement and direction accurately Provides reliable signals for speed and position measurement Contactless sensing for long-lasting operation Compatible with Arduino, Raspberry Pi, ESP32, and similar controllers Ideal for robotics, automation, and motion-tracking applications

Cytron UNO – Arduino UNO Compatible Board with USB Micro-B The Cytron UNO is a fully Arduino UNO compatible development board built with the reliable ATmega328P microcontroller, making it ideal for beginners, students, hobbyists, and electronics enthusiasts. Designed to offer the same functionality as the Arduino UNO R3, the Cytron UNO includes 14 digital I/O pins, 6 PWM outputs, 6 analog inputs, UART, SPI, I2C, and full R3 shield compatibility. With USB Micro-B connectivity, you can easily program the board using the same cable used for Android phones and power banks - making it more convenient and cost-friendly for modern makers. Cytron further enhances the board with a stronger onboard voltage regulator, improved power handling, and repositioned LEDs on the edge for better visibility, even when a shield is attached. The CT-UNO also includes extra standard pads for custom shields, an FTDI-based USB interface for stable programming, and robust DC input support from 7V to 15V. Whether you’re building IoT prototypes, robotics, embedded systems, or learning coding fundamentals, the Cytron UNO delivers reliability, ease of use, and full compatibility with the entire Arduino ecosystem. Features Powered by SMD ATmega328P with Optiboot (UNO R3) bootloader for fast programming. USB programming enabled by stable FTDI FT231X chip for improved reliability. Supports DC 7–15V input with upgraded onboard voltage regulator for higher output current. Offers 14 digital I/O pins, including 6 PWM outputs, and 6 analog inputs for versatile projects. Fully Arduino UNO R3 shield compatible with ISP header and broken-out SDA, SCL, IOREF pins. Uses USB Micro-B socket, compatible with standard Android phone cables. LEDs relocated to board edge for clear visibility during development. Includes additional 2.54mm pads for creating custom shields. White PCB design with clean layout and Cytron build quality. Dimensions

SmartElex BS312 PIR Motion Sensor The SmartElex BS312 PIR Motion Sensor is a compact passive infrared sensor designed to detect human motion by sensing changes in infrared radiation. It helps systems respond only when movement is present, reducing unnecessary power usage and improving efficiency. This sensor is suitable for students, makers, engineers, educators, and startups who are building electronics projects that require reliable motion detection in a small, low-power form factor. This PIR motion sensor is ideal for robotics, IoT devices, security systems, and automation projects, especially those that run on batteries or need low standby power consumption. It can be easily interfaced with popular platforms such as Arduino, Raspberry Pi, and ESP32, making integration quick and straightforward. Common use cases include motion-activated lighting, smart alarms, occupancy detection, and compact IoT monitoring solutions where dependable performance and simple integration are essential. Features: Compact PIR sensor for accurate human motion detection Detects movement using passive infrared technology Low power consumption ideal for battery-powered projects Digital output for easy interfacing with microcontrollers Fast response time for real-time motion detection Compatible with Arduino, Raspberry Pi, ESP32, and similar boards

7Semi MAX31855 K-Type Thermocouple Amplifier Breakout The 7Semi MAX31855 Thermocouple Amplifier Breakout is designed for creators, engineers, and industrial users who need reliable and highly accurate temperature readings from extreme environments. With its advanced MAX31855 converter IC, this breakout allows effortless digital temperature measurement using K-type thermocouples, making it a powerful choice for applications like 3D printing, HVAC monitoring, and high-heat industrial systems. The onboard cold-junction compensation ensures precision by automatically correcting any thermal offsets at the connector. Supporting temperatures from -270°C to +1372°C, it delivers 14-bit resolution with smooth 0.25°C read steps, providing dependable, noise-free readings for sensitive processes. Built-in fault detection helps identify open circuits or shorts, making the system easier to troubleshoot and safer for continuous operation. With its SPI-based digital interface and compatibility with 3.3V/5V logic microcontrollers, the module integrates cleanly with Arduino, ESP32, Raspberry Pi, and industrial controllers. Features: Supports a wide thermocouple measurement range from –270°C to +1372°C, making it suitable for extreme heat and cryogenic applications. Provides 14-bit high-resolution output with precise 0.25°C increments for accurate temperature monitoring. Includes built-in cold-junction compensation, ensuring reliable compensation for ambient temperature fluctuations. Offers a simple SPI digital interface, requiring minimal I/O pins for easy integration with most microcontrollers. Compatible with multiple thermocouple types including K, J, N, T, S, R, and E, providing versatility in system design. Features fault detection for open thermocouples and shorts to VCC/GND to enhance system safety. Supports both 3.3V and 5V logic levels, ensuring broad compatibility across development boards.

Cytron UNO Special Edition – Arduino-Compatible Board with Side Connectors The Cytron UNO Special Edition (CT-UNO-SE) is a fully Arduino-compatible development board designed for makers, students, and hobbyists who need reliable performance for DIY electronics and robotics projects. Built around the ATmega328P microcontroller, this board offers the familiar Arduino UNO experience while adding enhanced stability with the FTDI FT231X USB-to-Serial chip, ensuring smoother programming and communication. Whether you're prototyping sensors, robotics circuits, or automation systems, this board delivers a dependable and beginner-friendly platform for all your microcontroller learning needs. What makes the CT-UNO-SE stand out is its unique side connectors, allowing it to be stacked on top of or beneath Arduino shields, giving you maximum flexibility while building layered circuits or compact embedded systems. With full Arduino UNO R3 shield compatibility, 14 digital I/O pins, 6 analog inputs, and both 5V and 3.3V regulated outputs, this special edition board combines convenience, versatility, and long-term durability - all wrapped into a sleek white PCB that makes your projects look clean and professional. Features Built with the ATmega328P microcontroller paired with the Optiboot bootloader for faster program uploads. Equipped with the FTDI FT231X USB interface, offering stable and reliable serial communication. Supports a wide DC input range of 7–15V, suitable for most maker power setups. Includes a 1A 5V regulator and 500mA 3.3V regulator for powering sensors and modules. Offers 14 digital I/O pins (6 PWM) and 6 analog inputs for versatile interfacing. Fully R3 shield compatible with special side connectors for flexible stacking. Features 32KB Flash memory, 2KB SRAM, and 1KB EEPROM for program storage. Comes with easily visible TX, RX, power, and pin-13 LEDs placed on the board edge. Utilizes a durable USB Micro-B connector on a clean white PCB. Dimensions