24V RGB 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof 24V RGB 5050 SMD LED Strip with 1Meter length has 300 Bright, RGB LEDs on the single strip!  The strip is comprised of 5050 Sized SMD RGB LEDs and draws a total of 22.5 Watts of Power. This RGB 5050 SMD LED Strip strip is flexible and can be bent to conform to curves and corners. Runs from 24VDC. (Power supply and controller not included) You need a minimum output 2 AMPs Adapter to power this full 1 Meter strip. Using an underpowered power supply on these strips will result in power loss down the line and mismatched colors due to a certain color of diodes not receiving enough power. These strips are a bit different because, though they have the same number of LED modules (300) in another Cold white or Warm White roll, they actually have three times the light-emitting diodes as a regular LED strips. This is because each of the 300 modules on the strip each contains three colors. A red, a blue and a green LED. This means that, when set to white, at full brightness, the RGB strips use almost three times the power as the regular white strips. A 1 Meter roll of RGB LEDs uses roughly 2.8 Amps at 24VDC. So connecting three of these strips, end-to-end would result in roughly an 8.4 Amp requirement. With this you can create different ambience at the comfort of your hands just by switching lights on and the designer sequence of lights that are already preset. These lights can be used as decorative pieces around the house especially during festive occasions, office buildings, walls etc. or for any functions to brighten the occasion. read more : NEOPIXEL WORKING AND DEMO Note : These are NOT individually addressable LED strips. Each color has its own separate 24VDC circuit. For a total of three 24VDC circuits (R G B). You can power these strips off of regular 24V DC if you don’t need advanced flashing patterns or color mixing. Application: Ideal for decoration of building outlines, landscape illumination, amusement themes. Holiday light sculpture, decorative figure, active signs, displays, shop windows Storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway.

24V Warm White 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof This Bright 5050 SMD LED, has high intensity and reliability. It has a significantly longer life span of around 50,000 hours than ordinary LED strips available in the market and therefore it can be used for application where long-life performance required. This 5 meter LED strip with around 300 LEDs on strip operates at 24V at 2A DC supply. The Strip has soldered endpoint from both ends to connect strip conveniently. The flexible ribbon is very easy for curving around bends and for completely smooth and even light spread, solving the uneven luminous problem. This LED strip has the advantage of Ultra-bright but running at low-temperature low power consumption. The strip comes with 5M self-adhesive to easy install. With this you can create different ambience at the comfort of your hands just by switching lights on and the designer sequence of lights that are already preset. These lights can be used as decorative pieces around the house especially during festive occasions, office buildings, walls etc. or for any functions to brighten the occasion. Application: Ideal for decoration of building outlines, landscape illumination, amusement themes. Holiday light sculpture, decorative figure, active signs, displays, shop windows Storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway.

25W Ceramic Coated Needle Delux Long Life Bit For Soldron 25w Soldering Iron - CB25N3 This is Soldron CB25N3 Black 25W Ceramic Coated Delux Needle Bit for Soldron 25w soldering iron. The Soldering bit is a High-Quality Soldering Iron Tip. This is a Ceramic Coated 3mm 25 Watt Chisel tip; it can be used with Soldron 25 W soldering iron. Upgrade your soldering gun with a new tip, you’ll get better & faster solder joints and the whole process will be much more enjoyable. They’re fast to swap, takes only 30 seconds to change out. The hard core of the soldering iron tip consists of pure copper, which drastically enhance thermal conductivity to a great degree. In consequence, the rate of heating can be unbelievably boosted.

25W Soldering Iron + Tip + 10g Lead This is  High-Quality 25 Watt Iron Soldering Gun. If you are a student or hobbyist and you are looking for a good general-purpose Soldering Iron then this 25-watt soldron Soldering Iron is perfect for you.  Even we have been using this Solder Gun from the start and it the best that you can get at this price range. Applications: PCB assembly & repair Electricals soldering Textile cutting Jewellery.

28 Pin Narrow IC Base 28 Pin IC base is a 28 pin IC holder, which can be soldered directly onto the PCB. The integrated circuit can be removed from this ic base when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder. The socket is used when the IC is temperature sensitive and the heat from the soldering iron can damage the IC. This socket is used when working with a microcontroller IC and can be removed for programming Also check pack of 5 20-pin narrow IC bases available on Iotcart. These IC bases are holders that can be soldered directly onto a PCB, allowing for the removal of integrated circuits (ICs) when needed, effectively acting as a removable IC holder. Package Included: 5 x 28 Pin Narrow IC Base

28 Pin Wide IC Base The 28-Pin IC base is a 28 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder. The socket is used when the IC is temperature sensitive and the heat from the soldering iron can damage the IC. This socket is used when working with a microcontroller IC and can be removed for programming Also check pack of 5 40 Pin Wide IC Bases available on Iotcart. Each IC base is a holder for a 40-pin integrated circuit (IC) and can be soldered directly onto a PCB. Package Included: 5 x 28 Pin Wide IC Base

2845 3000KV Sensorless Brushless Motor The 2845 3000Kv brushless motor is a sensorless motor that is designed to provide high torque and maximum efficiency. It is manufactured with high-quality material and has a low heat production ability. This helps the 3000Kv sensorless brushless motor to have a longer lifetime. This brushless motor also features strong overload protection and protects the drone components in terms of electrical failure.

2K 3296W Trimpot Trimmer Potentiometer (Pack of 5) 2K 3296W Trimpot is a high accuracy variable resistor and PCB mountable with 3 terminal pins. A general-purpose board mountable preset also called by other names like potentiometers, Trimpots, etc but is just a variable resistor. The voltage between the terminal varies as the trimpot is rotated. The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and the center pin outputs a variable voltage between 0v and Vcc as the rotary cermet is rotated. The potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver. This potentiometer has a single turn, which can be used to preset a value. Applications Can be used to adjust the voltage drop in the circuit Measurement and Test of electronic circuits Can be used to control the intensity of led lights in DIY projects Also check 5K 3296W Trimpot(Pack of 5) . The 5K 3296W Trimpot is a variable resistor that can be used to adjust voltage in a circuit. It is easy to mount on a PCB and can be adjusted with a screwdriver.

2K 3386P Trimpot Trimmer Potentiometer (Pack of 5) 2K 3386P Trimpot is a high accuracy variable resistor and PCB mountable with 3 terminal pins. A general-purpose board mountable preset also called by other names like potentiometers, Trimpots, etc but is just a variable resistor. The voltage between the terminal varies as the trimpot is rotated. The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and the center pin outputs a variable voltage between 0v and Vcc as the rotary cermet is rotated. The potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver. This potentiometer has a single turn, which can be used to preset a value. Applications Can be used to adjust the voltage drop in the circuit Measurement and Test of electronic circuits Can be used to control the intensity of led lights in DIY projects

2K ohm Cermet Preset Potentiometer (Pack of 5) Cermet preset is a compact variable resistor and PCB mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated. The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0v and Vcc as the rotary cermet is rotated. Applications: Can be used as a Voltage divider Can use it to obtain an adjustable output voltage Also check pack of 5 5K ohm Cermet Potentiometers available on the Iotcart website. Each potentiometer is a compact variable resistor and can be mounted on a PCB with 3 terminal pins. The resistance is 5K ohms with a tolerance of ±10%. It has a single turn and is designed for through-hole mounting. The potentiometer can be adjusted using a screwdriver and is suitable for various electronic devices where changing resistance values is required on the fly. Also check 500E ohm Cermet Potentiometer . It is a small, variable resistor that can be used to adjust the resistance of a circuit. It is commonly used in electronic devices such as audio equipment, voltage regulators, and robotics.