DS3231 Real Time Clock Memory Module with Battery (Pack of 25)

MPX10DP Differential Pressure Sensor The MPX10DP Differential Pressure Sensor consists of a pressure-sensitive element to determine the actual pressure applied to the sensor and some components to convert this information into an output signal. The MPX10DP Pressure Sensor is a dual-port uncompensated Silicon Pressure Sensor for environmental control systems and level indicators. The MPX10 series silicon piezoresistive pressure sensor provides a very accurate and linear voltage output, directly proportional to the applied pressure. This standard uncompensated sensor permits manufacturers to design and add their own external temperature compensation and signal conditioning networks. This sensor has on-chip temperature compensation and is laser-calibrated. As the output voltage is linear with the pressure the signal is particularly easy to interpret. check out : Differential Pressure Transmitter for Variable Air Volume(VAV) Connection Diagram with Arduino: Features: Dual-port uncompensated Silicon Pressure Sensor Accurate and linear voltage output proportional to applied pressure On-chip temperature compensation and laser calibration Easy interpretation of output voltage Suitable for flow measurement, level indicators, pressure-operated switches, and weather stations Applications: Flow measurement Level indicators Air Movement Control Pressure-operated switches Weather stations Pneumatic Control Systems

7Semi DC-DC Buck Converter 7V-40V Input to 5V 5A Output- AP64500 (BO-10188) The 7Semi DC-DC Buck Converter 7V–40V Input to 5V 5A Output – AP64500 (BO-10188) is a high-power voltage regulator module designed to convert higher DC input voltages into a stable 5V output with up to 5A current. Its wide input range makes it suitable for many power sources, including batteries and industrial supplies, where reliable 5V power is needed. Built around the efficient AP64500 synchronous buck converter, this module delivers stable output with low heat and high efficiency, even under heavy load. It is well suited for powering microcontrollers, single-board computers, sensors, and communication modules. Whether you’re building robotics, automation systems, or advanced electronics projects, this buck converter provides dependable and efficient power management. Features: Wide input voltage range: 7V to 40V DC Stable 5V output with up to 5A continuous current High-efficiency synchronous buck converter using AP64500 Low thermal loss and reliable performance under load Compact breakout module for easy project integration Built-in power protection features for safe operation Ideal for microcontrollers, SBCs, IoT and embedded systems Suitable for robotics, automation, and power supply projects

Bambu Lab H2D Pro EU 3D Printer with AMS 2 Pro and AMS HT The Bambu Lab H2D Pro EU 3D Printer with AMS 2 Pro and AMS HT is a professional multicolor FDM printing system built for high-performance manufacturing and advanced prototyping. It operates on 220–240 VAC, 50/60 Hz power input, making it suitable for European electrical standards and continuous industrial use. The printer features a 0.4 mm nozzle capable of reaching temperatures up to 350 °C, supports 1.75 mm filament, and uses hardened steel gears for long-term durability and consistent extrusion. Integrated with the AMS 2 Pro and AMS HT systems, it enables fully automatic filament switching, moisture-controlled storage, and intelligent material handling for complex multicolor and multi-material prints. The CoreXY motion architecture ensures high-speed, accurate movement, while smart auto calibration and real-time monitoring simplify setup and operation. With its enclosed design and professional-grade build quality, this system is ideal for product development, engineering applications, educational labs, and production environments where reliability, speed, and multicolor capability are critical. Stable Ethernet Connection, WPA2-Enterprise Authentication Wi-Fi Connection Strong network communication in challenging situations is ensured by the H2D Pro's newly integrated Ethernet port, which allows you to connect to your devices. Crowded wireless signal situations can also make use of Ethernet connectivity. In order to meet strict network security needs, the H2D Pro also has individual physical kill switches for Wi-Fi and WPA2-Enterprise Wi-Fi Authentication (EAP-PEAP/EAP-TLS/EAP-TTLS). Tailor Solution for Printer Management Bambu Lab provides businesses with expert assistance to create effective printer fleet management solutions that meet specific integration requirements. To help clients achieve customized functionalities, their skilled software R&D team offers comprehensive technical support. Flexible and Rigid, low Cost and Exotic Materials in One Print Create remarkable interlocking structures and inventive designs that go beyond conventional manufacturing by combining flexible and rigid materials in a single print. By utilizing premium materials only when required, combining high-performance materials with common ones further lowers costs and increases material efficiency. Advanced Multi-Color and Support Printing Supported printing is no longer a hassle. One nozzle can be set aside for specific support material using H2D's dual-nozzle arrangement, enabling secure printing and an ideal support interface. In multi-color prints, dual-nozzle printing minimizes purge cycles. In order to conserve time and materials, H2D's clever algorithms maximize dual-nozzle efficiency by optimizing filament utilization. Enhanced Print Reliability and Thermal Performance The H2D Pro optimizes chamber temperature via adaptive air circulation and a 65°C active heater. Active flaps manage airflow based on filament type to improve bonding and prevent warping or clogs. A high-performance fan in the toolhead front cover cools the extruder and heatsink, raising the operating threshold by 3°C to minimize jamming in difficult conditions. HRA 90 Tougher Nozzle, Lower Maintenance The tungsten carbide nozzle of the H2D Pro has remarkable wear resistance, with HRA 90 as opposed to hardened steel's 74. When printing abrasive, high-performance fiber-reinforced filaments, this leads to a 50% improvement in longevity. Effectively Filter Particulates and VOCs Generated by 3D Printing We've included a premium coconut shell activated carbon filter, an H12 HEPA filter, and a G3 pre-filter for the best possible air filtration. This improved method successfully reduces strong smells and particles, which is especially helpful when printing in areas with poor ventilation. Features: The printer supports high-temperature dual nozzle printing up to 350°C (662°F) to accommodate industrial-grade materials. An auxiliary extruder cooling fan is integrated to maintain precise temperature control during the extrusion process. The tungsten carbide super durable nozzle provides exceptional wear resistance for long-term use with abrasive filaments. An active chamber heating system reaches 65°C (149°F) to ensure optimal environment stability and reduce warping. The system achieves a 50um motion accuracy to deliver high-precision prints with fine detail. Users can utilize a stable Ethernet connection for reliable network communication in professional environments. A physical network killswitch is included to provide an immediate and secure way to disconnect the device from the network. Support for WPA2-Enterprise Wi-Fi Authentication ensures the printer meets strict corporate security protocols. Clean air is maintained through an adaptive air circulation system paired with high-efficiency HEPA filtering.

7Semi BME688 Environmental Sensor Nano Breakout with 2.54mm Pitch Header The 7Semi BME688 Environmental Sensor Nano Breakout with 2.54mm Pitch Header is a versatile and high-precision environmental sensor designed for modern monitoring applications. Built around Bosch’s advanced BME688, it accurately tracks temperature, humidity, air pressure, and gas levels, helping you gain meaningful insights into environmental conditions. Its compact nano form factor and I2C interface make integration simple with Arduino, Raspberry Pi, and other development boards. Whether you’re building a smart home system, an industrial monitoring setup, or an environmental research project, this environmental monitoring sensor delivers dependable performance in a user-friendly design. Features: AI-Enhanced Gas Sensing: Identifies dangerous gasses with exceptional accuracy. Comprehensive Monitoring: A single sensor measures numerous essential environmental factors. Flexible Interface: I2C connectivity enables seamless interaction with microcontrollers. Compact design: The nano breakout board is ideal for projects with limited space. 3.3V Operating Voltage: Suitable for a wide range of development boards. Gas sensor sensitivity, selectivity, and data rate can all be adjusted to meet your individual application requirements.

SmartElex Industrial Grade 15D DC Motor Driver The SmartElex Industrial Grade 15D DC Motor Driver is a powerful and reliable smart motor driver built for precise speed and direction control of DC motors in industrial and automation applications. This 15D Motor Speed Controller Board supports 15 amps continuous current and handles peak loads up to 30 amps for 10 seconds, making it suitable for high-torque motor operations. Operating at a 16 kHz switching frequency, the DC Motor Driver ensures quiet and smooth performance. Integrated with an intelligent microcontroller, it offers essential safety features like current limiting and thermal protection. The smart temperature control system automatically reduces motor speed by 50% at 80°C, restores normal operation below 70°C, and completely shuts down at 100°C, protecting both the motor and driver for long-lasting, stable performance. Features: Support motor voltages ranging from 7V to 28V. independent direction and speed control Onboard Low-internal resistance MOSFETs are switched at a frequency of 16 KHz. Overcurrent and thermal protection.

7Semi SHT41 Temperature & Humidity Sensor Tiny Breakout with I2C Qwiic The 7Semi SHT41 Temperature & Humidity Sensor Tiny Breakout is crafted for engineers, IoT developers, and embedded system designers who need precise environmental monitoring in extremely compact spaces. Powered by the fourth-generation SHT41 sensor, it delivers exceptional accuracy with ±1.8% RH and ±0.2°C precision, making it ideal for sensitive applications like HVAC regulation, smart home devices, and industrial IoT nodes. Its stable readings and fast response time ensure reliable environmental sensing even in dynamic conditions. Designed for low-power performance, this breakout operates on a 3.3V supply and consumes less than 0.15 mA in low-power mode, making it a perfect match for wireless systems and battery-powered deployments. With built-in I2C support, multiple address options, and a compact 1.27 mm pitch connector, integration is quick and hassle-free. Whether you're building connected sensors, indoor air-quality systems, or compact IoT hardware, this module provides dependable data for real-time decision-making and energy-efficient operations. Features: Designed with the advanced SHT41 sensor, offering high-precision measurements with ±1.8% RH humidity accuracy and ±0.2°C temperature accuracy. Operates with ultra-low power consumption, drawing less than 0.15mA in low-power mode to extend battery life in portable systems. Supports I2C communication with multiple configurable addresses for flexible integration in multi-sensor setups. Compact and lightweight form factor with a 1.27 mm pitch 4-pin connector, making it suitable for tight-space and embedded applications. Built for industrial-grade reliability, ensuring consistent performance across typical indoor and light industrial environments. Simple plug-and-play workflow enables quick installation for IoT platforms, smart buildings, automation systems, and environmental monitoring.

DFRobot Gravity 7/24 Industrial Analog pH Sensor Meter Kit for Arduino The DFRobot Gravity 7/24 Industrial Analog pH Sensor Meter Kit for Arduino is a high-precision Analog pH Sensor designed for professional and industrial applications requiring continuous pH monitoring. This Arduino pH Sensor uses an industrial-grade glass membrane electrode with low impedance, delivering fast response, excellent thermal stability, and stable performance over long periods. It supports a full measurement range of 0 pH to 14 pH with linear voltage output, ensuring accurate and reliable readings. The sensor integrates easily through a BNC connector and PH2.0 interface, allowing direct connection to any Arduino analog input. Its reference system, based on Ag/AgCl gel electrolyte with a PTFE membrane, provides strong anti-pollution characteristics and prevents clogging, making it an ideal industrial pH sensor for Arduino for water treatment systems, environmental monitoring, and laboratory analysis. Attention: The probe's bottle top contains protective fluids (3.3mol/L KCL). Even if the bottle cap is tightly fastened, some protective liquid may leak around it, resulting in white crystals. However, as long as the bottle top contains protective liquid, the probe's life and accuracy will be unaffected. Please use it with confidence. It is recommended that the white crystals be returned to the bottle cap's protective liquid. Features Industrial-grade Analog pH Sensor for accurate measurement Compatible with Arduino and other microcontrollers Measures pH range from 0 to 14 Fast response with high stability BNC connector for secure sensor connection Plug-and-play PH2.0 analog interface Built-in power indicator LED Suitable for long-term online monitoring Low maintenance and long sensor life Ideal for water quality and lab applications Applications Water Quality Surveillance Aquaculture

7Semi SC18IM704 UART to I2C Bus Bridge Breakout Board The 7Semi SC18IM704 UART to I2C Bus Bridge Breakout Board is a compact and efficient UART to I2C bridge converter designed to simplify communication between UART-based microcontrollers and I2C peripherals. It enables reliable protocol conversion with UART speeds of up to 460.8 kbit/s, while the integrated 256-byte FIFO buffer minimizes data loss during high-speed transfers. Using an easy-to-implement ASCII message protocol, developers gain precise control over I2C bus sequences, including timing and arbitration. With additional user-programmable GPIO pins, this board is well-suited for embedded systems, industrial control, and IoT applications where UART and I2C interfaces must work together seamlessly. Features: High-Speed Communication: Supports UART baud rates of up to 460.8 kbit/s and a 256-byte FIFO for efficient data processing. User-Friendly Interface: Communicates with the host MCU via conventional RX and TX pins, making integration into systems straightforward. I2C Protocol Control: The ASCII message protocol provides full control over I2C-bus sequences, including protocol, arbitration, and timing. Industrial Applications: Ideal for communication bridges, automation control, and I2C bus support in a variety of industrial configurations. Configurable GPIO Pins: Provides multiple user-configurable GPIO pins to meet unique application requirements.

24v 0.15A Brushless DC Fan The 24v 0.15A Brushless DC Fan is a compact and reliable cooling solution designed for efficient airflow in electronics and industrial applications. This dc brushless fan 24v features a high-performance brushless motor that ensures low noise, reduced power consumption, and extended lifespan compared to traditional fans. Its centrifugal blower-style design directs air precisely where needed, making it perfect for 3D printers, control cabinets, power supplies, and embedded systems. With a 24V DC operating voltage and 0.15A current rating, it delivers consistent cooling performance while maintaining energy efficiency. Built with durable housing and easy mounting points, this fan is ideal for continuous operation environments. Features: Efficient cooling performance Stable 24V DC operation Low power consumption Quiet and smooth airflow Compact and space-saving design Durable brushless motor technology Easy installation and wiring Ideal for electronics and enclosure cooling

7Semi PT100 RTD 3-Wire Temperature Sensor Probe The 7Semi PT100 RTD Temperature Sensor Probe is built for engineers and industrial users who need dependable, high-accuracy temperature monitoring across a wide operating range. Using a premium JUMO PCA 1.2003.1EG platinum-chip element, this probe follows the IEC 60751:2008 Class F0.15 (Class A) standard, ensuring precise and stable readings from -70°C to +300°C. Its platinum resistance design offers exceptional repeatability with minimal drift, making it a reliable choice for long-term process monitoring and industrial automation systems. Designed with a durable 2-inch stainless steel probe and a 3-metre insulated 3-wire cable, this PT100 sensor is ideal for harsh, wet, or corrosive environments. Whether used in chemical plants, HVAC systems, laboratory setups, industrial machinery, or temperature-controlled processing units, it delivers consistently accurate performance. This combination of precision, durability, and affordability makes it a smart upgrade for anyone looking for a high-accuracy industrial temperature sensor. Features: Designed with a wide operating range from -70°C to +300°C, making it suitable for demanding industrial and laboratory applications. Built with a JUMO PCA platinum-chip element that meets IEC 60751:2008 Class F0.15 (Class A) standards for high accuracy and stability. Equipped with a 2-inch stainless steel probe, offering long-lasting durability even in harsh or corrosive conditions. Comes with a 3-metre insulated 3-wire cable, allowing easy installation in remote or hard-to-reach areas. Utilises platinum resistance technology for excellent repeatability, low drift, and consistent output over time. Features a waterproof design, enabling reliable operation in moisture-rich environments. Offers a cost-effective, high-reliability solution suitable for automation systems, industrial processes, and precision monitoring tasks.

Cytron MDS160A 160Amp 8V–28V DC Motor Driver The Cytron MDS160A 160Amp 8V–28V DC Motor Driver is a high-power, smart motor controller built for demanding applications such as AGVs, combat robots, industrial conveyors, heavy-duty mobile robots, and high-torque motion systems. With its massive 160A continuous output, support for 8V–28V motors, and silent 16 kHz MOSFET switching, this motor driver ensures smooth, efficient, and reliable operation under extreme loads. It is designed for makers, engineers, and industrial projects that require a robust DC motor controller capable of delivering serious power. Powered by smart onboard firmware, the Cytron MDS160A offers multiple input modes, including RC, PWM+DIR, Analog, and UART, making it highly flexible for different control setups. It provides intelligent safety features such as thermal protection, regenerative braking, and temperature-based current limiting. You can also pair two MDS160A units for plug-and-play differential-drive robotics. Whether you're creating a powerful robot or building custom industrial automation, the Cytron MDS160A delivers the strength, stability, and smart control needed for high-performance motor applications. Features: Bi-directional control for a single brushed DC motor. Supports 8V–28V input voltage, suitable for various high-power applications. Capable of 160A continuous, 175A (2 minutes), and 190A peak for 1 minute. 16 kHz PWM switching frequency ensures silent, smooth motor control. Full MOSFET-based solid-state design - no flyback diodes required. Includes regenerative braking for improved efficiency. Built-in thermal protection and temperature-based current limiting. Multiple operating modes: RC, Analog, PWM+DIR, UART (Serial). Onboard test buttons for quick motor testing without a controller. Can pair with another MDS160A for differential-drive robot applications.

7Semi PCA9306 I2C Bidirectional Voltage Level Translator Breakout Board The 7Semi PCA9306 I2C Bidirectional Voltage Level Translator Breakout Board is a compact and efficient PCA9306 voltage level translator designed to safely interface I2C and SMBus devices operating at different logic levels. Supporting voltage translation from 1.2V to 5.0V, this board enables seamless communication between low-voltage sensors and higher-voltage microcontrollers without manual direction control. As a dependable I2C logic level converter, it delivers minimal signal delay and stable bidirectional data flow, making it ideal for robotics, industrial controllers, embedded systems, and DIY electronics projects requiring precise mixed-voltage I2C communication. Allowable Voltage Level Translation The breakout can transfer voltages ranging from 3.3V to 5V. VREF1 (Low Side) VREF2 (High Side) 1.2V 1.8V, 2.5V, 3.3V, 5V 1.8V 2.5V, 3.3V, 5V 2.5V 3.3V, 5V 3.3V 5V Features: Wide Voltage Range Support: Operates between 1.2V and 5.0V, accommodating a wide range of components. Dual Bidirectional Channels: Translates both the SDA and SCL lines for complete I2C compatibility. I2C and SMBus Protocol Support: Fully compatible with regular and fast-mode I2C devices, as well as SMBus peripherals. No Direction Pins Required: Signal direction is automatically detected for easier design. Low propagation delay: A delay of less than 1.5ns maintains data integrity at high speeds. 5V Tolerant I/O Ports: Securely links 5V signals to lower voltage devices. Compact and simple to use: ideal for embedded applications, prototyping, and compact systems.

Anycubic Kobra 3 Max 3D Printer – EU power plug The Anycubic Kobra 3 Max 3D Printer – EU power plug is a high-performance large-format FDM 3D printer designed for fast, precise, and large-scale printing. With an expansive build volume, it allows users to create bigger models or multiple parts in a single print, making it ideal for professional prototyping, product design, and advanced DIY projects. Equipped with high-speed printing capabilities and intelligent automation features, it delivers consistent results with minimal manual intervention. Models Created Built for efficiency and ease of use, the printer features advanced auto bed leveling technology for perfect first layers, a stable dual-axis motion system for reduced vibrations, and a high-temperature hotend compatible with a wide range of filaments. The EU power plug ensures compatibility with standard 220–240V power systems. Whether for industrial use, educational labs, or creative projects, this 3D printer offers reliable performance and excellent print quality. 420*420*500mm Print Volume The massive 420 × 420 × 500 mm print volume of the Anycubic Kobra 3 Max enables users to create large-scale models in a single print without the need to split designs into multiple parts. This expansive build area is ideal for producing full-sized prototypes, architectural models, and functional components with greater efficiency and precision. It significantly reduces assembly time and improves structural strength since parts can be printed as one complete piece. Printing Speed Up to 600mm/s With a printing speed of up to 600 mm/s, the Anycubic Kobra 3 Max is designed to deliver rapid production without compromising on print quality. This high-speed capability significantly reduces overall printing time, allowing users to complete large models and batch prints much faster than traditional 3D printers. It is especially beneficial for professionals and businesses that require quick prototyping and efficient workflow. Despite the speed, the printer maintains stability and precision through its advanced motion system, ensuring clean layers and accurate results. Precise Auto-Leveling & Motor Anti-skip The printer features an advanced auto-leveling system that ensures the print bed is perfectly calibrated before every print, eliminating the need for manual adjustments and reducing setup time. This precise leveling improves first-layer adhesion, which is crucial for achieving high-quality and successful prints. In addition, the motor anti-skip mechanism enhances movement accuracy by preventing step loss during high-speed operations. This results in smoother motion, better layer consistency, and reduced chances of print failure. Extremely Easy to Use The printer is designed with user convenience in mind, making it extremely easy to use for both beginners and experienced users. Its intuitive interface and guided setup process allow you to get started quickly without any technical complexity. Features like automatic bed leveling and pre-configured settings reduce manual effort and minimize errors during printing. The streamlined design ensures smooth operation, while simple controls make monitoring and adjusting prints hassle-free. Features: Massive build volume for large-scale 3D printing High-speed printing capability for improved productivity Intelligent auto bed leveling system for perfect first layers High-temperature hotend supporting multiple materials Dual motor-driven axis for enhanced stability and accuracy User-friendly interface for easy operation Compatible with popular slicing software Durable and rigid frame for consistent performance Suitable for prototyping, manufacturing, and creative projects

7Semi UCC21330 Dual-channel Isolated Gate Driver Breakout Board The 7Semi UCC21330 Dual-Channel Isolated Gate Driver Breakout Board is designed to efficiently drive power transistors like MOSFETs, IGBTs, and SiC devices with a peak source current of 4A and a peak sink current of 6A. Its 3kVRMS isolation barrier ensures safe and reliable operation in high-voltage environments, while programmable dead-time control allows precise timing adjustments to minimize switching losses and prevent shoot-through. Integrated protection features, including undervoltage lockout (UVLO) and a disable function, safeguard your system and enable immediate shutdown when needed. This compact breakout board is perfect for applications such as motor drives, power converters, and industrial automation systems requiring precise and reliable gate driving. Features: Supports dual low-side, dual high-side, and half-bridge configurations for a wide range of power applications. High Current Capacity: 4A peak source and 6A peak sink output provide robust transistor control. Enhanced Protection: All power supplies include UVLO protection and a configurable dead time for safe operation. Precision timing is achieved with a 33ns mean propagation latency and a maximum pulse-width distortion of 5ns. Robust CMTI operation: Common-mode transient immunity of more than 125V/ns enables dependable operation in high-noise settings. Fast Disable Logic: The built-in disable feature allows you to shut down both outputs at the same time.

7Semi DC-DC Buck Converter 14V-60V Input to 5V 3A Output- AP66300 (BO-10189) The 7Semi DC-DC Buck Converter 14V–60V Input to 5V 3A Output – AP66300 (BO-10189) is a compact power module designed to convert high DC input voltages into a stable 5V output with up to 3A current. Its wide input range makes it suitable for applications that use automotive, industrial, or high-voltage power sources. Built on an efficient synchronous buck design, this converter delivers reliable power with low heat generation and minimal energy loss. It is well suited for powering microcontrollers, sensors, communication modules, and other embedded electronics. Whether you’re working on industrial systems, automation projects, or advanced DIY builds, this buck converter provides a dependable and efficient power solution. Features: Wide input range: accepts 14V to 60V DC sources Provides a stable 5V output at up to 3A High-efficiency buck converter design for low energy loss Compact breakout board for easy project use Built-in power protection for safer operation Ideal for automotive, industrial, and embedded electronics Supports powering microcontrollers, sensors, and communication modules Efficient solution for IoT, automation, and high-voltage systems