Arduino MEGA 2560 Atmel R3 Board compatible with Arduino The Arduino Mega 2560 R3 is an open-source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip. The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allows the shields to adapt to the voltage provided from the board. The other is not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins. This Board has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller. Using the board is also very easy, simply connect it to a computer with a USB cable or power it with a DC adapter or battery to get started. The Mega 2560 R3 board is compatible with most shields designed for Arduino/Genuino Uno and the former boards Duemilanove or Diecimila. Check out Affordable Arduino UNO R3 for beginners & experts. Also check Arduino MEGA Prototype Shield V3 . Key Features: Features the microcontroller ATmega2560. 54 digital I/O pins are included (15 PWM outputs). Four UARTs and sixteen analog inputs allow for smooth connection. Allows for modern Arduino/Genuino Uno shields. Perfect for projects requiring a large amount of I/O capability and prototyping. Includes an ICSP header, reset button, USB connectivity, and crystal oscillator operating at 16 MHz.

MEGA 2560 Atmel R3 Board compatible with Arduino The Arduino Mega 2560 R3 is an open-source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip. The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allows the shields to adapt to the voltage provided from the board. The other is not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins. This Board has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller. Using the board is also very easy, simply connect it to a computer with a USB cable or power it with a DC adapter or battery to get started. The Mega 2560 R3 board is compatible with most shields designed for Arduino/Genuino Uno and the former boards Duemilanove or Diecimila.

Arduino MEGA 2560 CH340 R3 Compatible Board The Arduino MEGA 2560 R3 feature-packed development board is a dream come true for electronics enthusiasts and creators. It comes with top-notch quality and assurance. This Arduino mega microcontroller Board is a true powerhouse, equipped with 54 digital I/O pins and 16 analog input pins. It caters to all age groups and skill levels, encouraging skill development as you experiment and innovate. It's an ideal choice for a spectrum of applications, from robotics to automation and IoT projects. The AT Mega2560 Arduino R3 board is an Android Accessory Development Kit (ADK) that can be powered via a USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or a battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board’s power jack. The Arduino Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is powered over USB, 500mA total is available for the phone and board. It's engineered to solve a wide range of user applications. This makes it a must-have for makers, students, and professionals alike. If you're someone who values quality and versatility in your electronics projects, the Arduino MEGA 2560 R3 Board is an indispensable tool. New Features of the Arduino Mega2560 R3 Board Features a 1.0 pinout with added SDA and SCL pins near the AREF pin. Features two new pins located near the RESET pin. It allow mega2560 shields to adapt to the voltage provided by the board. The At Mega2560 development board also features a stronger RESET circuit. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Applications: Building robotic projects. Creating automation systems for home or industrial use. Perfect for Internet of Things (IoT) applications. Capable of gathering data from sensors and input devices. Excellent for prototyping electronic projects. A valuable tool for teaching electronics, programming, and engineering concepts. Controlling lights, appliances, and security devices.

Mega 2560 Pro CH340G ATmega2560 Board The Mega Pro Embed CH340G / ATmega2560 board is based on the ATmega2560 microcontroller and the USB-UART adapter CH340. The board is compatible with Arduino Mega 2560. The Mega 2560 is an excellent solution for building exciting projects based on ATmega2560. The Mega Pro Embed functionalities are identical to the Arduino Mega 2560. Even though it is an Embed board, it is solid and stable as the Mega Board. It uses the original chip, and a 16 MHz high-quality quartz resonator is present on the board. atmega2560 board has a Micro USB connector that allows you to connect the microcontroller to the computer via the USB-UART adapter CH340 and may require an installation driver. You can power the Mega 2560 Pro or power the pins through the MicroUSB connector. The voltage regulator (LDO) can handle input voltages from 6V to 9V (peak 18V) DC. The voltage regulator allows to use up to 18V as an input value, however, we do not recommend exceeding the recommended values aforementioned, since this can lead to excessive heat and damage the device. Key Features: Based on the ATmega2560. Equipped with a 16 MHz quartz resonator. Integrated CH340 adapter for easy USB connectivity. Fully compatible with the Arduino Mega 2560. Supporting input voltages from 6V to 9V (up to 18V peak). Comes with 20-pin headers for easy prototyping. Features a built-in voltage regulator (LDO). Applications : IoT Projects Home automation Agriculture automation

MEGA 2560 R3 Board compatible with Arduino The MEGA 2560 R3 CH340G Board MEGA 2560 R3 Board compatible with Arduino is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android-based phones, based on the MAX3421e IC. The ATMega2560 has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is based on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board has a resistor pulling the 8U2 HWB line to the ground, making it easier to put into DFU(Device Firmware Upgrade) mode. New Features of the Mega2560 R3 Board The Mega2560 R3 board features a 1.0 pinout with an added SDA and SCL pins near the AREF pin. It also features two new pins located near the RESET pin. They allow mega2560 shields to adapt to the voltage provided by the board. The At Mega2560 development board also features a stronger RESET circuit. The AT Mega2560 Arduino R3 board is an Android Accessory Development Kit (ADK) that can be powered via a USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board’s power jack. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Because the Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is powered over USB, 500mA total is available for the phone and board.

Mega 2560 R3 Sensor Shield V2.0 compatible with Arduino The Arduino mega has many more i/o pins (54 digital pins and 16 analog pins)than a standard Arduino. This Arduino shield also has connectors specifically for some external devices like an SD card, radio communications (Bluetooth and others). It also has an option to power the "v" pins on all the digital i/o 3-pin groups from an external power supply instead of the Arduino +5v. This is good for large numbers of servos etc. The "analog" 3-pin groups still use the Arduino +5v which is better from an electrical noise perspective. Version has two options of +5v supply to all the "v" pins jumper on: +5 comes from the Arduino. Should be limited to about 300 ma jumper off: +5 (or other appropriate voltage) comes from an external supply connected to the blue terminal strip. External power ground must also be connected to the blue terminal strip. New Arduino Mega 2560 R3 Sensor Shield V2.0 has an advantage of a PCB Immersion Gold processed all of the digital and analog interfaces, the motherboard will not only be extended to the steering gear line order form ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 radio frequency module communication interface, and RB URF v1.1 ultrasonic sensor interface, and independent expansion easier to use convenient. beginner, do not have cumbersome complex circuit connection and headache, will simplify the circuit on the true meaning of this sensor expansion board can easily connect the commonly used sensor , a sensor only needs a universal 3P sensor cable (regardless of digital cable and analog cable), complete the circuit connection, write the program is downloaded to the MEGA controller reads the sensor data, or receive wireless module return data, operation processing, final Easily complete your own interactive works. PCB finest Immersion Gold processing Plug it easier to set up a variety of commonly used module interface Applications: You can connect the expansion board to various modules, such as sensor, relay, button and so on.

Arduino Mega 2560+WiFi R3 ATmega2560+Node MCU ESP8266 CH340G Board Compatible with Arduino Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 is a customized version of the Arduino Mega R3 board with full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently. Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible with Arduino Mega is Full integration on one board Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb. All of the modules can work together or separately. And everyone has their pinout headers. The convenient solution for the development of new projects requiring Uno and WiFi. Via USB you can update sketches and firmware for ATmega328 and ESP8266. Switch status and model selection: Connection/Switch No. 1 2 3 4 5 6 7 8 CH340 connect to ESP8266 (upload sketch) OFF OFF OFF OFF ON ON ON NoUSE CH340 connect to ESP8266 (connect) OFF OFF OFF OFF ON ON OFF NoUSE CH340 connect to ATmega2560 (upload sketch) OFF OFF ON ON OFF OFF OFF NoUSE CH340 connect to Mega2560 COM3 connect to ESP8266 ON ON ON ON OFF OFF OFF NoUSE Mega2560+ESP8266 ON ON OFF OFF OFF OFF OFF NoUSE All modules work independently OFF OFF OFF OFF OFF OFF OFF NoUSE Also, have the switch to change of connecting port between ATmega2560 and ESP8266After choosing the mode of the board can proceed to set up the IDEIt is important that when the ESP8266 module is programming, it is necessary to press the button Mode Applications: IoT smart applications Wi-Fi-based applications Robotics applications Can be used to enable internet connectivity to embedded applications

MEGA Prototype Shield V3 The Arduino-compatible MEGA Prototype Shield V3.0 comes equipped with a breadboard , allowing you to easily construct circuits. The Arduino shield features a gold PCB sink process and a compact mainboard with small golden square pad spacing, making it convenient to solder components onto. With the Prototyping Shield, designing custom circuits is a breeze. You can either solder components to create a prototyping area for your project or utilize a small breadboard for testing circuit ideas without the need for solder. Additionally, it offers extra connections for all I/O pins and ample space to mount through-hole and surface mount integrated circuits. This makes it a convenient solution for building custom circuits and modules. The Prototype shield, when paired with a miniature breadboard, measures 2.7 inches in length and 2.1 inches in width. It also includes three screw holes for attaching it to a surface or case. Do note that the distance between digital pins 7 and 8 is 160 mil (12:16”), which is not an even multiple of the 100-mile distance from the other pins.

Arduino Micro with Headers The Arduino Micro was developed by Arduino in collaboration with Adafruit. The Arduino micro is a powerful development board integrated with the ATmega32U4 microcontroller. This arduino board features 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. The Arduino Micro contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. This Original Arduino Micro is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behaviour of the board. Onboard is the processor, crystal, micro USB connection with fuse, Reset button, ISP low-level reprogramming header, ON LED, TX and RX LEDs, an extra user pin #13 LED, and a 3.3V regulator. You’ll probably also want to pick up a micro-B USB cable to connect this board to your computer You can use it for basic Arduino sketches as well as USB client projects like making it appear as a mouse or keyboard to your computer! Although it is not shield compatible – it does have all the same pins as a Leonardo. Its best for when you want to shrink your project down or use it on a breadboard. Pinout of Arduino Micro Note: Iotcart is the authorized seller of Arduino in India. Therefore, even if you are Bangalore, Hyderabad, Mumbai, or Pune, you can order and buy Arduino Micro online from the comfort of your home. Look out our various collections of Original Arduino Boards .

Arduino MKR IoT Bundle The Arduino MKR IoT Bundle comes with the most optimum set of components to get started with building various projects right from a beginner level all the way up to advanced IoT projects. This Arduino kit helps you get practical hands-on experience in the embedded systems and IoT domain. It is the perfect kit for the everyday hobbyist and tinkerer. The Arduino MKR IoT bundle ships with the Arduino MKR1000 board which combines the functionality of the Zero and the Wi-Fi Shield. It offers a practical and cost-effective solution for makers seeking to add Wi-Fi connectivity to their projects. It is based on the Atmel ATSAMW25 SoC (System on Chip), which is part of the SmartConnect family of Atmel Wireless devices, specifically designed for IoT projects and devices. The design includes a Li-Po charging circuit that allows the Arduino/Genuino MKR1000 to run on battery power or external 5V, charging the Li-Po battery while running on external power. Pinout Of Arduino MKR IoT Bundle Applications: I Love You Pillow Puzzle Box Pavlov's Cat The Nerd Plant Communicator Warning: Unlike most Arduino & Genuino boards, the MKR1000 runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board. While output to 5V digital devices is possible, bidirectional communication with 5V devices needs proper level shifting. Note: The Arduino MKR IoT kir comes in a 22x15cms package and weighs about 200 grams. Iotcart is the authorized seller of Arduino in India. Therefore, even if you are in Bangalore, Hyderabad, Mumbai, or Pune, you can order and buy Arduino MKR IoT Kit online from the comfort of your home. Please note, don't connect 9V to the board, as it will be damaged. You can use the 9v Battery strip to supply an external component.