Combo of W1209 Digital Thermostat Temperature Controller with 12V 2AMP Adapter, 12V DC 0.15A Fan, DC female Jack/Splitter and Alligator Clips

The DIY Mini Wind Turbine Blade Set is a compact, vertical-axis wind turbine kit designed for educational, experimental, and small-scale renewable energy applications. Ideal for hobbyists, students, and engineers, this micro generator blade set enables hands-on learning about wind energy conversion and sustainable power generation. Each blade is precision-engineered for optimal aerodynamic efficiency at low wind speeds, making it perfect for indoor demonstrations or outdoor micro-generation setups. This set includes lightweight, durable blades compatible with most small DC generators and motors repurposed as generators. The vertical axis design ensures 360-degree wind capture, eliminating the need for yaw mechanisms and allowing operation from any wind direction. It's widely used in STEM education, science fairs, IoT energy harvesting prototypes, and off-grid sensor power systems. Easy to assemble and integrate, the kit supports experimentation with blade pitch, count, and generator coupling. Whether you're building a wind-powered charger, environmental monitoring station, or classroom demo, this turbine blade set offers a practical, low-cost entry into wind energy technology. Available for fast delivery across India.

24v 0.15A Brushless DC Fan The 24v 0.15A Brushless DC Fan is a compact and reliable cooling solution designed for efficient airflow in electronics and industrial applications. This dc brushless fan 24v features a high-performance brushless motor that ensures low noise, reduced power consumption, and extended lifespan compared to traditional fans. Its centrifugal blower-style design directs air precisely where needed, making it perfect for 3D printers, control cabinets, power supplies, and embedded systems. With a 24V DC operating voltage and 0.15A current rating, it delivers consistent cooling performance while maintaining energy efficiency. Built with durable housing and easy mounting points, this fan is ideal for continuous operation environments. Features: Efficient cooling performance Stable 24V DC operation Low power consumption Quiet and smooth airflow Compact and space-saving design Durable brushless motor technology Easy installation and wiring Ideal for electronics and enclosure cooling

24V DC 4020 Centrifugal Cooling Fan with XH2.54-2P 30CM Cable This 24V DC 4020 hydraulic centrifugal cooling fan is built with premium, high-temperature-resistant materials for exceptional durability. It’s perfect for cooling heat sinks on hot ends, 3D prints, and various other applications. The 24V DC 3D printer cooling fan is crafted from high-quality PBT reinforced with 30% glass fibre, along with VO and precision bearings, it delivers a long lifespan and low noise operation. This DC cooling fan is designed to manage temperatures up to 75°C, it operates optimally at 40°C and supports continuous 24-hour use. Features Best 35mm radial cooling fan. Operates at 24V DC with a 2-pin connector. Constructed from premium PBT reinforced with 30% glass fiber and VO. Features high-precision bearings for extended durability and quiet performance. Ideal for efficiently cooling heat sinks on hot ends, 3D prints, and other applications.

4020 Turbo 3D Fan Cooler The 4020 turbofan cooler is designed for 3D printers and needs an operating voltage of 12V. The DC turbo fan consumes low power and performs PWM functions and is also called a rack cooling fan. The 4020 3d Printer turbofan is manufactured with incoming PBT anti-plastic material that provides great protection against fire and does not cause deformation at high temperature. The 4020 turbofan blower is designed for a super cooling effect. This is achieved with a design for upper ventilation and super wind pressure. Features: Perfectly fit on the extruder Noiseless Performance Low Current consumption Easy to install and connect.

12V Brushless DC Fan 4010 This DC Brushless fan just needs to be powered up with a 12V power source. It has low current consumption and finds its application in a lot of projects like cooling Peltiers and heatsinks . It is high-temperature resistant and extremely durable. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs. Increased ventilation to keep the electronics components cool and performing at high efficiency. It can be used to maintain the temperature of the extruder in 3d printers . B earing is high precision, long life, and low noise. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs Also check out the full DC Fan Collections . Applications: Used for cooling Peltiers and heatsinks. Used in maintaining the temperature of the extruder in 3d printers

Dedicated 4020 Cooling Fan for Jetson Nano This 4020 cooling fan is designed and optimized for best performance with the NVIDIA jetson nano. The dimensions and the functionality of this cooling fan is makes it work well with jetson nano. It helps solve the heating issues and improves the efficiency of the Jetson Nano.

220v AC Cooling Fan The 220v AC Cooling Fan are powered with a changing voltage of positive and of equal negative value. In general, this changing voltage has a sinusoidal shape. Worldwide, the usual value of this sinusoidal voltage may vary in size and in frequency, These AC Cooling Fans are operating at 220V with a dimension of 120mm*120mm*38mm. This Cooling fan helps your electrical products cool, extends the life of the system, and performs better. DC cooling fans are rugged and resistant to high temperatures. The new fan is of excellent quality and attractive price. Easy to install and draws in hot air from inside the enclosure. Increase the airflow in your system. Cool the entire case.  System life and computer work better. Applications: Computer Case 3D Printer

D80SH-12 8025 12V Cooling Fan Power Supply Cabinet The D80SH-12 8025 12V Cooling Fan Power Supply Cabinet powerful exhaust cooling is designed for the power supply or CPU cabinet. It has a two-pin connector to connect in a controller 12V output pin. This DC Fan operates at 12V supply and operates can automatically by the controller system. It is used for multipurpose application. Features: Good airflow Noiseless Performance Easy to install and connect.

8025 12V DC Cooling Fan This is a High-Quality 8025 cooling fan, which consists of a 4-pole Brushless DC Motor with a precise vapor bearing system, this cooling fan can deliver an airflow up to 8.0 CFM, which is sufficient enough to keep the electronics cool. This creates a vibrating and shaking of the rotating rotor is prevented. Since there is no contact between the bearing and shaft, the bearing touches the result is just the surrounding air. The result is the creation of a cooling fan with exceptional features such as a uniform rotation, low noise, and special durability to meet any requirement. Features: Good airflow Noiseless Performance Easy to install and connect. Also check 12V CPU cooling fan sold by Iotcart.  The fan is 80 x 80mm and has a ball bearing. It can be used in CPUs, incubators, and 3D printers.

5V 4010 DC Fan This 5V 4010 DC fan featuring a brushless motor and sleeve bearing providing excellent reliability and improved performance. The dc fan is housed in a 40 x 40 x 10mm thermoplastic frame and is terminated using the wire leads.

5V Mini Fan for Raspberry Pi (30x7 mm) This 5V mini fan is very easy to use, it just needs to be powered up with a 5V power source. It has low current consumption and finds its application in a lot of projects like cooling of peltiers and heatsinks. This Cooling Fan for 3D Printer is a small but powerful fan. The cooling fan finds its use as an exhaust fan on the Raspberry pi case as well as 3D printers. It maintains the temperature of the extruder, which results in smooth printing. You can also use it to ensure that your Raspberry Pi is kept cool and running at optimal conditions when running heavy-duty operations. It can be directly connected to the 5v & GND pins of the Raspberry Pi and it will run whenever the Pi is turned on. The cooling fan operates on 0.2A 5V DC power supply which can be easily powered from RPI board. It has a 2 pin JST connector to easily connect to the printer controller system, and provide hassle-free operation. The fan is made of plastic and is lightweight. It can also be used for other cooling applications like motor drivers that require heatsinks and rise to high temperatures which indirectly affects its overall efficiency. Applications: Cooling Raspberry Pi Cooling of peltiers Cooling 3D printers Also check the Raspberry Pi 4 Official Case Fan , and the fan case is designed for Raspberry Pi 4 microcontrollers. The fan is temperature-controlled, delivering up to 1.4 CFM of airflow. The case includes a heatsink for improved heat transfer from the processor.

Cooling Fan DC 12V 3010 for 3D Printer The 12V 3010 Cooling Fan for 3D Printer is Small but powerful exhaust cooling is designed for the 3D printer . It has two pin connector to connect in a printer controller. DC Fan operates at 12V supply and operates automatically by the Printer controller system. It is used to mount on extruders to maintain the temperature of an extruder for seamless printing. This mini fan has the ability to run at a speed of 6800 ~ 13000 rpm. The body of the fan is built from a combination of resin and plastic material. The combination provides strength and insulation to the fan. Due to its manufacturing, It is light in weight and strong enough to bear some falls on the ground. So if you are looking for a perfect combination of strength and insulation in a single fan, then you are in the right place. Note : Image Shown may differ from actual product in term of the brand name. Features: Good airflow Noiseless Performance Very low Current consumption Easy to install and connect.

DC 12V 4CM 5010 Double Ball Cooling Fan Durable Turbo Blower for 3D Printer The Original DC 12V 4CM 5010 Double Ball Cooling Fan is a great choice for a strong and easy-to-use fan for your 3D printer. It runs at 5000 to 6000 RPM to keep things cool and has five durable blades. The 2-pin connection makes it simple to plug in, and it works well for 3D printer cases or other electronics that need reliable cooling.

12V 0.18A CPU Cooling Fan DC cooling fan fans blow air along the axis of the fan or parallel to the track of the blade axis. Dc axial fans are found in a variety of applications, including computing, servers, telecommunication cabinets, and any type of equipment where the need for thermal control is necessary for the improved reliability and life extension of the components that are included in the system. Specifically designed for pressure demanding applications such as CPU or radiator cooling. It has high precision bearing, long life and low noise. Applications: Can be used in CPU cooling Can be used in Incubators Can be used in 3D Printers Accessories

Bambu Lab Hotend Cooling Fan for A1 Mini, A1 The Bambu Lab Hotend Cooling Fan for A1 Mini and A1 is an essential component designed to keep the hotend at a safe and stable temperature during 3D printing. By providing efficient airflow directly to the hotend, this fan prevents overheating and ensures the printer operates within its optimal temperature range. Proper cooling helps maintain consistent extrusion, improves print reliability, and protects the hotend from thermal stress. Specifically built for the Bambu Lab A1 Mini and A1 printers, this cooling fan supports stable printing conditions, enabling smoother operation and dependable print quality throughout long printing sessions. Features: Efficient Cooling: Maintains the hotend and its components at the appropriate temperature, reducing overheating and ensuring smooth printing performance. Designed particularly for the Bambu Lab A1 and A1 Mini 3D printers, ensuring smooth connection. High-quality materials provide durability for long-term use and operation. Easy Installation: Includes screws (BT2-4) for a rapid and secure attachment to the hotend assembly. Lightweight and compact design eliminates needless bulk in printer setup.