Mornsun LMF1500-20B48 AC/DC 1500W Enclosed SMPS The LMF1500-20B48 is a 1500W AC/DC enclosed power supply from Mornsun. It has two outputs, one at 48V and one at 5V. The 48V output can provide up to 32A of current, while the 5V output can provide up to 2A of current. The power supply has a wide input voltage range of 85-264VAC or 120-370VDC. It is also protected against over-voltage, over-current, over-temperature, and short-circuit. The LMF1500-20B48 is a reliable and versatile power supply that can be used in a variety of applications, such as industrial control systems, LED lighting, and telecommunications. check out : Mornsun LMF1500-20B24 AC/DC 1500W Enclosed SMPS Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment Package Includes: 1 x  Mornsun LMF1500-20B48 AC/DC 1500W Enclosed SMPS Specifications: Sure, here is a table of the specifications for the LMF1500-20B48 power supply: Specification Value Output power 1500W Output voltage 48V/5V Output current 32A/2A Input voltage 85-264VAC or 120-370VDC Efficiency up to 94% Dimensions 250mm x 127mm x 40.5mm Weight 3.5kg

Mornsun LMF1500-20B24 AC/DC 1500W Enclosed SMPS The LMF1500-20B24 is a 1500W enclosed AC-DC switching power supply from Mornsun. It features a universal AC input voltage of 85-264VAC and a DC input voltage of 120-370VDC. The output voltage is adjustable from 12V to 24V with a maximum current of 62.5A. The power supply also has a 5V/2A output for powering peripherals. The LMF1500-20B24 is designed for use in a variety of applications, including industrial, LED, street light control, electricity, security, telecommunications, and smart home. It is a cost-effective and reliable solution for a wide range of power needs. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LMF1500-20B48 AC/DC 1500W Enclosed SMPS Package Includes: 1 x Mornsun LMF1500-20B24 AC/DC 1500W Enclosed SMPS Specifications: Specification Value Model LMF1500-20B24 Power 1500W Input Voltage 85-264VAC Output Voltage 12V-24V Output Current 62.5A 5V/2A Output 2A Efficiency Up to 94% Dimensions 230 x 160 x 85mm Weight 4.5kg

Mornsun LMF500-20B24 AC/DC 500W Enclosed Switching Power Supply The LMF500-20B24 is a 500W enclosed AC/DC switching power supply from Mornsun. It features a universal AC input voltage of 80-264VAC, a DC output voltage of 24VDC, and a DC output current of 20.9A. The power supply is also equipped with a power factor correction (PFC) function, which helps to improve the power efficiency of the device. The LMF500-20B24 is a cost-effective and reliable power supply that is suitable for a wide range of applications, including industrial, LED, streetlight control, electricity, security, telecommunications, and smart home.

Mornsun LMF200-23B24 AC/DC 200W Enclosed Switching Power Supply The LMF200-23B24 is an enclosed AC/DC converter from Mornsun. It has a single output of 24V at 8.33A, for a total power output of 201W. The input voltage range is 85-305VAC or 120-430VDC, and the efficiency is 88%. The isolation voltage is 4000VAC. The LMF200-23B24 is a versatile power supply that can be used for a variety of applications, including industrial control, medical equipment, and telecommunications. It is also suitable for use in harsh environments, thanks to its IP65 rating. check out : Mornsun LMF200-23B05 AC/DC 200W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LMF200-23B48 AC/DC 200W Enclosed Switching Power Supply Package Includes: 1 x  Mornsun LMF200-23B24 AC/DC 200W Enclosed Switching Power Supply Specifications Output voltage 24V Output current 8.33A Total power output 201W Input voltage range 85-305VAC or 120-430VDC Efficiency 88% Isolation voltage 4000VAC

Mornsun LMF1000-20B48 AC/DC1000W Enclosed Switching Power Supply The LMF1000-20B48 is a universal AC-DC switching power supply from Mornsun. It accepts both AC and DC input voltages, making it a versatile and cost-effective solution for a wide range of applications. The power supply features low no load power consumption, high efficiency, high reliability, and double or reinforced insulation. It also meets a variety of industry standards, including IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, EN60601, and GB4943. The LMF1000-20B48 is widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications. Universal AC input Accepts DC input voltage Low no load power consumption High efficiency High reliability Double or reinforced insulation Meets industry standards Widely used in industrial, LED, street light control, electricity, security, telecommunications, and smart home applications check out : Mornsun LMF1000-20B12 AC/DC1000W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment Package Includes: 1 x  Mornsun LMF1000-20B48 AC/DC1000W Enclosed Switching Power Supply Specifications Output Power 1018W Series LMF1000-20B Part Number LMF1000-20B48 Mechanical Form Enclosed IP Level  Non-Waterproof  Output Voltage 48V Output Current 21A

Mornsun LMF200-23B12 AC/DC 200W Enclosed Switching Power Supply The LMF200-23B12 is an enclosed AC/DC power supply from Mornsun. It has a power output of 200W and an output voltage of 12V. The input voltage range is 85 to 305VAC, and the output current is 16.67A. The efficiency is 85.5%, and the isolation voltage is 4000VAC. The power supply is also protected against overvoltage, overcurrent, and short circuit. Features Enclosed design for protection from dust and moisture Wide input voltage range for compatibility with a variety of power sources High output current for powering a wide range of devices High efficiency for low power consumption Overvoltage, overcurrent, and short circuit protection for safety Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment Package Includes: 1 x  Mornsun LMF200-23B12 AC/DC 200W Enclosed Switching Power Supply Specifications: Power output 200W Output voltage 12V Input voltage range 85 to 305VAC Output current 16.67A Efficiency 85.5% Isolation voltage 4000VAC Dimensions 230 x 125 x 80mm Weight 3.2kg

Mornsun LMF150-23B12 AC/DC Enclosed Switching Power Supply The LMF150-23B12 is an enclosed AC/DC power supply from Mornsun. It has a power output of 150W and an output voltage of 12V. The input voltage range is 85 to 305VAC, and the output current is 12.5A. The efficiency is 85.5%, and the isolation voltage is 4000VAC. The power supply is also protected against overvoltage, overcurrent, and short circuit. Features Enclosed design for protection from dust and moisture Wide input voltage range for compatibility with a variety of power sources High output current for powering a wide range of devices High efficiency for low power consumption Overvoltage, overcurrent, and short circuit protection for safety check out : Mornsun LM100-23B24 AC/DC 100W Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LM150-20B24 AC/DC 150W Enclosed Switching Power Supply Package Includes: 1 x  Mornsun LMF150-23B12 AC/DC Enclosed Switching Power Supply Specifications Power output 150W Output voltage 12V Input voltage range 85 to 305VAC Output current 12.5A Efficiency 85.5% Isolation voltage 4000VAC Dimensions 190 x 100 x 65mm Weight 2.2kg

Mornsun LMF100-23B24 AC/DC 100W Enclosed Switching Power Supply The LMF100-23B24 is an enclosed AC/DC converter from Mornsun. It has a single output of 24V at 4.2A, for a total power output of 100.8W. The input voltage range is 85-305VAC or 120-430VDC. The converter is also conformal coated for protection in harsh environments.

Mornsun LMF600-20B15 AC/DC 600W Enclosed Switching Power Supply The LMF600-20B15 is a 600 watt, 15 volt, 40 amp enclosed AC-DC switching power supply from Mornsun. It features a universal input voltage of 80 to 277 VAC or 110 to 390 VDC, high efficiency up to 92%, low no load power consumption, high reliability, double or reinforced insulation, and excellent EMC performance. It meets IEC/EN/UL62368, EN60335, EN61558, IEC/EN60601, GB4943 standards.

Mornsun LMF200-23B48 AC/DC 200W Enclosed Switching Power Supply The LMF200-23B48 is a 200W, 48V AC/DC power supply from Mornsun. It has a wide input voltage range of 85-305VAC or 120-430VDC, and can output up to 4.2A of current. The LMF200-23B48 is also equipped with a number of features that make it ideal for industrial applications, including a conformal coating that protects it from harsh environments, and a PFC circuit that helps to improve efficiency.

Mornsun LMF600-20B12 AC/DC 600W Enclosed Switching Power Supply The LMF600-20B12 is an enclosed AC-DC switching power supply from Mornsun. It features a universal AC input of 80-277VAC or 110-390VDC, a single output of 12V at 50A, and an efficiency of up to 92%. The LMF600-20B12 is also equipped with double or reinforced insulation for safety, and it meets a variety of safety standards, including IEC/EN/UL62368, EN60335, EN61558, IEC/EN60601, and GB4943.

Mornsun LMF320-23B48 AC/DC 320W Enclosed Switching Power Supply The LMF320-23B48 is a 48V, 321.6W enclosed AC-DC switching power supply from Mornsun. It features a universal input voltage of 85-305VAC or 120-430VDC, accepts AC or DC input (dual-use of same terminal), an operating temperature range of -30℃ to +70℃, built-in active PFC function, high I/O isolation test voltage of up to 4000VAC, output short circuit, over-current, over-voltage, and over-temperature protection, LED indicator for power on, built-in DC fan, and emissions that meet CISPR32/EN55032 CLASSB. The LMF320-23B48 is a versatile and reliable power supply that can be used in a variety of applications, including industrial, LED, street light control, electricity, security, telecommunications, and smart home. check out : Mornsun LMF150-23B24 AC/DC Enclosed Switching Power Supply Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment Package Includes: 1 x  Mornsun LMF320-23B48 AC/DC 320W Enclosed Switching Power Supply Specifications Input voltage 85-305VAC or 120-430VDC Output voltage 48V Output current 6.7A Power 321.6W Operating temperature range -30℃ to +70℃

Mornsun LMF1000-20B12 AC/DC1000W Enclosed Switching Power Supply The LMF1000-20B12 series is an enclosed AC-DC switching power supply from Mornsun. It features a universal AC input, DC input voltage acceptance, cost-effectiveness, low no-load power consumption, high efficiency, high reliability, and double or reinforced insulation. These converters offer excellent EMC performance and meet IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN62368, EN60335, EN60601, and GB4943 standards. They are widely used in industrial, LED, street light control, electricity, security, telecommunications, smart home, and other applications. Features Universal AC input: The power supply can be operated with AC input voltages ranging from 90 to 264 VAC. DC input voltage acceptance: The power supply can also be operated with DC input voltages ranging from 120 to 370 VDC. Cost-effectiveness: The power supply is a cost-effective solution for a variety of applications. Low no-load power consumption: The power supply consumes very little power when it is not in use. High efficiency: The power supply is highly efficient, which can save energy costs. High reliability: The power supply is designed to be highly reliable and can withstand harsh environmental conditions. Double or reinforced insulation: The power supply features double or reinforced insulation, which provides added safety. Excellent EMC performance: The power supply offers excellent EMC performance, which can help to reduce interference with other electronic devices. Compliance with international standards: The power supply meets a variety of international standards, which ensures its quality and performance. Wide range of applications: The power supply can be used in a wide range of applications, including industrial, LED, street light control, electricity, security, telecommunications, smart home, and others. If you are looking for an enclosed AC-DC switching power supply with a variety of features, the LMF1000-20B12 series from Mornsun is a great option. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment Package Includes: 1 x  Mornsun LMF1000-20B12 AC/DC1000W Enclosed Switching Power Supply Specifications: Type Enclosed Type Single Output Output Power 970W Series LMF1000-20B Part Number LMF1000-20B12 Mechanical Form Enclosed IP Level  Non-Waterproof  Output Voltage 12V Output Current 80A

Mornsun LMF500-20B48 AC/DC 500W Enclosed Switching Power Supply The LMF500-20B48 is a 500W enclosed AC/DC switching power supply from Mornsun. It features a universal input voltage of 80-264VAC or 110-370VDC, and can be used with either AC or DC input. The power supply has a high efficiency of up to 93%, and is equipped with active PFC to help reduce power consumption and improve power factor. The LMF500-20B48 also features a wide operating ambient temperature range of -30 to +70 degrees Celsius, and is protected against short circuit, overcurrent, overvoltage, and overtemperature. Features Universal input voltage of 80-264VAC or 110-370VDC Accepts AC or DC input (dual-use of the same terminal) High efficiency of up to 93% Active PFC to help reduce power consumption and improve power factor Wide operating ambient temperature range of -30 to +70 degrees Celsius Protected against short circuit, overcurrent, overvoltage, and overtemperature Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment Package Includes: 1 x  Mornsun LMF500-20B48 AC/DC 500W Enclosed Switching Power Supply Specifications Power 500W Input voltage 80-264VAC or 110-370VDC Output voltage 48V DC Output current 10.4A Efficiency Up to 93%

Mornsun LMF200-23B15 AC/DC 200W Enclosed Switching Power Supply The LMF200-23B15 is an enclosed AC/DC converter from Mornsun. It has a single output of 15V at 13.4A, for a total power output of 201W. The input voltage range is 85-305VAC or 120-430VDC, and the efficiency is 88%. The isolation voltage is 4000VAC. The LMF200-23B15 is a versatile power supply that can be used for a variety of applications, including industrial control, medical equipment, and telecommunications. It is also suitable for use in harsh environments, thanks to its IP65 rating. Note: Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m All index testing methods in this datasheet are based on our company's corporate standards In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability The out case needs to be connected to the earth ( )of system when the terminal equipment in operating The output voltage can be adjusted by the ADJ, clockwise to increase Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units The power supply is considered a component which will be installed into the final equipment. All EMC tests should be confirmed with the final equipment check out : Mornsun LMF200-23B24 AC/DC 200W Enclosed Switching Power Supply Package Includes: 1 x Mornsun LMF200-23B15 AC/DC 200W Enclosed Switching Power Supply Specifications Output voltage 15V Output current 13.4A Total power output 201W Input voltage range 85-305VAC or 120-430VDC Efficiency 88% Isolation voltage 4000VAC