12V 6 RPM Center Shaft DC Gear Motor

ULN2003 12V Stepper Motor Driver This 12V DC 28BYJ-48 Stepper Motor is a low-cost, high-quality geared stepper motor. Because of the system's stability and reliability, the 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a popular combination of stepper motor and stepper driver. The pack includes the ULN2003 Stepper Motor Driver, which is a Mini Stepper Motor Driver. The main function of the ULN2003 is to amplify the control signals from the Arduino so that they can be used to drive the 28BYJ-48 Stepper Motor. If you want to control the stepper motor with the stepper motor driver, for that you will need a few essential components like Arduino jumper wires batteries or power supply Features: Stepper motor with a standard interface, when used directly pluggable. A, B, C, D four-phase LED indicator which indicates the status of the stepper motor work. Compact-size stepper motor perfect for small robotics applications. Also, read our blog What is Motor Driver detailing an overview of motor drivers, including the different types available and how they work.

28BYJ-48 5V DC Stepper Motor This 5V DC 28BYJ-48 Stepper Motor is small, inexpensive and high-quality geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a widely popular combination of the stepper motor and stepper driver, because of the stability and reliability of the system. The motor has a reduction ratio of 64:1, so it offers a decent torque for its size at speeds of about 15 RPM. It is a unipolar stepper motor which has 5-wires. As stated before the pack contains ULN2003 Stepper motor driver which is a Mini Stepper Motor Driver.The main purpose of ULN2003 is to amplify the control signals from the Arduino, so as to drive the 28BYJ-48 Stepper Motor. If you will give the ULN2003 Stepper motor driver a certain pulse signal, it will drive step motor to a certain angle.The control of Stepper motor movement angle is done by controlling the number of stepper motor driver pulses. The speed of the stepper motor rotation is also controllable by controlling the frequency of the pulses. Connect the 28BYJ-48 motor with the ULN2003 motor driver then interface this combination of motor and driver with Arduino , do some coding and your 28BYJ-48 Stepper Motor is ready to listen to your commands Features: Stepper motor with a standard interface, when used directly pluggable. A, B, C, D four-phase LED indicator which indicates the status of the stepper motor work. Compact-size stepper motor perfect for small robotics applications. Applications: Cameras for providing precise control and positioning. Tilting of car side mirrors can be controlled using these motors. CNC Machines Robotic Arms Home Automation

12V 10A PWM DC Motor Speed Controller The DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The 12 Volt DC Motor Speed Controller can provide a continuous current of 10A to your DC motor or other DC load. The circuit also includes a 10A fuse, with the reverse connection of the power supply and control voltage over-voltage protection function. This speed regulator uses a barrier terminal block as its wiring type. The output voltage is linear under load and features a control frequency of 13kHz. Note: This cannot be used for the brushless motor. The controller is not reverse-polarity protected and will be damaged if it connects the supply voltage with the wrong polarity. Features: Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current protection. Control voltage over-voltage protection function The overload and short circuit protecting current is 10A Applications: Automotive: Controlling the speed of cooling fans, windshield wipers, and air conditioning systems. Industrial Automation: Managing the speed of conveyor belts, exhaust fans, and other motor-driven machinery. Home Appliances: Adjusting the speed of fans, pumps, and other household devices. Treadmills: Regulating the speed of the treadmill belt for different workout intensities. Robotics: Providing precise speed control for DC motors in robotic projects. DIY Projects: Ideal for custom electronics projects requiring variable motor speed control

The DIY Mini Wind Turbine Blade Set is a compact, vertical-axis wind turbine kit designed for educational, experimental, and small-scale renewable energy applications. Ideal for hobbyists, students, and engineers, this micro generator blade set enables hands-on learning about wind energy conversion and sustainable power generation. Each blade is precision-engineered for optimal aerodynamic efficiency at low wind speeds, making it perfect for indoor demonstrations or outdoor micro-generation setups. This set includes lightweight, durable blades compatible with most small DC generators and motors repurposed as generators. The vertical axis design ensures 360-degree wind capture, eliminating the need for yaw mechanisms and allowing operation from any wind direction. It's widely used in STEM education, science fairs, IoT energy harvesting prototypes, and off-grid sensor power systems. Easy to assemble and integrate, the kit supports experimentation with blade pitch, count, and generator coupling. Whether you're building a wind-powered charger, environmental monitoring station, or classroom demo, this turbine blade set offers a practical, low-cost entry into wind energy technology. Available for fast delivery across India.

1200W PWM Motor Speed Controller with Potentiometer This is a simple and easy-to-use DC motor speed controller of small size, elegant appearance, and stable performance. It is made with a high-quality circuit board which ensures a longer service life. The DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The motor speed controller can provide a continuous current of 8A to your DC motor or other DC load. Speed Regulator is an important electronic DIY equipment. Do not touch the heat sink with the wiring. If it touches, it may burn the circuit board. Note that this is not a power module. It must be connected to the motor to speed it up. There is no change in the output of the multimeter without the motor. Features: Maximum Power: 1200W The speed of the DC motor can be controlled by adjusting the pulse width modulation (PWM). The knob realizes 0-100% adjustment, supports step-less speed regulation, and facilitates positioning speed.

A3967 Stepper Motor Driver This A3967 Stepper Motor Driver For Arduino is the most recent version of EasyDriver v44, which was created in collaboration with Brian Schmalz. When compared to previous versions, it offers more flexibility and control over your stepper motor . It is a simple stepper motor driver that is compatible with most microcontrollers and capable of producing a digital 0 to 5V pulse (0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). A 7V to 30V power supply is required for the module's motor. The digital interface is powered by an onboard voltage regulator that can be set to 5V or 3.3V. The A3967 is a full-featured microstepping motor driver with an integrated transistor. It is intended for use with bipolar stepper motors in full-, half-, quarter-, and eighth-step modes, with output drive capabilities of 30 V and 750 mA. The A3967 comes with a fixed off-time current regulator that can operate in slow, fast, or mixed current-decay modes. This current-decay control scheme produces less audible motor noise, higher step accuracy, and lower power dissipation. The transistor is essential to the A3967's simple implementation. Simply sending one pulse to the STEP input causes the motor to move one step (full, half, quarter, or eighth depending on two logic inputs). It is not necessary to programme phase-sequence tables, high-frequency control lines, or complex interfaces. The A3967 interface is ideal for applications where a complex P is either unavailable or overburdened. Features: A3967 microstepping driver Adjustable current control from 150mA/phase to 750mA/phase MS1 and MS2 pins are broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth) Compatible with 4, 6, and 8-wire stepper motors of any voltage Breadboard-compatible pins.

A4988 Stepper Motor Driver Module with Heat Sink For 3D Printer (Red) A4988 Stepper Motor Driver is a complete micro-stepping motor driver with a built-in translator for easy operation. The product can be full, half, 1/4, 1/8, and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or mixed decay mode. The converter is the key to the easy implementation of the A4988. In inputting one pulse on the STEP input drives the motor one micros tep. No phase sequence tables, high-frequency control lines, or complex interfaces to programming. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. The micro-step operation, the chopping control in the A4988 automatically selects the current decay mode (Slow or Mixed). In the mixed decay mode, the device is initially set to fast decay in the part of the fixed off-time, then a slow decay in the rest of the downtime. Mixed-decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry to improve the pulse-width modulation (PWM) power consumption when operating. Internal circuit protection includes thermal shutdown with hysteresis, under-voltage lockout (UVLO) and crossover current protection. Special power-Sort. If you want to control the stepper motor with this motor driver, you will need a few essential components like Arduino , breadboard, jumper wires, batteries, and power supply. Features: Simple step and direction control interface Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step Automatic current decay mode detection/choice. Mixed with slow current decay mode Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates check out : Stepper Motor Driver Expansion Board

VIGOR 9V 200 RPM Dual Shaft Straight Shape BO Motor The VIGOR 9V 200 RPM Dual Shaft BO Motor – Straight Shape is a lightweight, efficient, and affordable geared DC motor designed for high-speed motion in robotics and DIY electronic projects. With its dual-shaft design, this motor allows easy integration of wheels, encoders, and mechanical attachments, giving you more flexibility when building mobile robots or automation prototypes. It operates smoothly within a 3–12V range, offering good torque and a fast 200 RPM output that is ideal for small to medium robotic platforms. Built using durable injection-molded plastic gears, the motor ensures low friction, low noise, and long-lasting performance without requiring lubrication. Its compact body design includes mounting holes for quick installation, making it perfect for 2WD robotic cars, educational kits, and hobby projects. Whether you’re a beginner experimenting with robotics or a maker building a custom prototype, this dual-shaft BO motor offers an excellent balance of performance, efficiency, and value. Features: High-speed 200 RPM dual-shaft motor designed for mobile robotics and DIY systems. Smooth and stable performance across 3–12V operating voltage range. Lightweight plastic gear housing ensures low inertia and quiet operation. Dual-shaft layout supports wheels, pulleys, and encoder attachment for more control. Integrated mounting holes allow easy installation on robot chassis and project enclosures. Shock-absorbing, corrosion-resistant, and low-maintenance design ensures long service life. Low-cost alternative to metal gear motors without compromising functionality. Compatible with 69mm plastic wheels for optimized robot mobility.

VIGOR 9V 150 RPM Single Shaft BO Motor The VIGOR 8mm Single Shaft BO Motor (Straight Shape) is a compact and efficient DC motor designed to deliver reliable performance for robotics, DIY models, and small automation systems. With a rated speed of 150 RPM and smooth operation even at lower voltages, this motor is an excellent fit for students, hobbyists, and makers working on small robotic vehicles or battery-powered mechanisms. Its lightweight plastic body ensures reduced system weight without compromising durability. Engineered for easy integration, the motor features an 8mm single output shaft, making it compatible with common robotic wheels such as 69mm gear wheels. Built-in mounting points simplify installation, while its low-noise, low-friction design supports stable and long-lasting operation. Whether you're assembling an educational robot, building a prototype, or replacing a toy car motor, this BO motor provides a dependable and cost-effective solution. Features: Compact DC motor designed for robotics, automation prototypes, and DIY projects. Operates smoothly within 5–12V, delivering consistent torque and stable RPM. Rated speed of 150 RPM, ideal for small mobile robots and mechanical setups. 8mm single output shaft ensures compatibility with standard plastic robotic wheels. Lightweight plastic housing reduces overall project weight while maintaining strength. Built-in mounting holes allow quick and hassle-free installation. Low inertia, low friction, and shock-absorbing characteristics for reliable long-term use. Suitable for educational kits, battery-powered systems, and small moving mechanisms.

7Semi Vikram-3015 High-Power 30V 15A Single-Channel DC Motor Driver Module The 7Semi Vikram-3015 is a powerful and reliable high-current motor driver designed to handle demanding brushed DC motor applications with ease. Built for makers, robotics engineers, and automation projects, it supports a wide operating voltage range of 6V to 30V and delivers a continuous 15A output without requiring a heat sink. Its fully NMOS H-Bridge architecture ensures excellent efficiency, making it ideal for high-load motor control setups that require consistency and stable performance. With support for 3.3V and 5V logic levels, the Vikram-3015 easily integrates with popular development platforms such as Arduino, Raspberry Pi, and PLC systems. The on-board test buttons, motor output LEDs, and robust protection circuitry, such as overcurrent, overheating, and undervoltage protection, simplify debugging and ensure long-term reliability. Whether you're building robotics systems, automation hardware, or DIY mechatronics, this motor driver provides a dependable foundation for high-torque motor control. Features: Provides smooth bidirectional control for single-channel brushed DC motors, enabling forward and reverse operation with high responsiveness. Operates efficiently across a wide 6V–30V voltage range while delivering a strong and stable 15A continuous current output. Supports both 3.3V and 5V logic inputs, ensuring seamless compatibility with microcontrollers and SBCs like Arduino and Raspberry Pi. Includes onboard testing features such as dedicated buttons and motor output LEDs for quick diagnostics and validation. Offers robust safety mechanisms including overcurrent protection, over-temperature shutdown, and undervoltage lockout for long-term durability. Uses a fully NMOS H-Bridge, improving efficiency and eliminating the need for bulky heat sinks.

Sunny Sky A2212 980KV Brushless Motors Clockwise The Sunny Sky A2212 980KV Brushless Motor Clockwise is designed to offer a perfect combination of power, efficiency, and reliability for RC enthusiasts. With its precise 980KV rating, this motor delivers consistent thrust while maintaining optimal energy efficiency, making it ideal for both RC planes and multi-rotor drones. The clockwise (CW) rotation simplifies setup and ensures proper motor alignment in your configuration. Equipped with advanced cooling fins, it effectively dissipates heat, allowing for longer flight durations without performance drops. Built using high-quality materials, this motor ensures durability even under demanding conditions. Its user-friendly design and compatibility with standard mounting patterns make installation quick and hassle-free, making it a dependable upgrade for improving overall flight performance. Features: High Performance: The Sunny Sky A2212 980KV Brushless Motor - CW delivers exceptional power and performance to your RC aircraft. Reliable Construction: This engine is built with high-quality materials, ensuring durability and longevity even under heavy use. 980KV Rating: The motor's 980KV rating provides an optimal blend of thrust and efficiency, making it appropriate for a wide range of aircraft types. Clockwise (CW) Rotation: Designed for clockwise rotation, making it simple to incorporate into your RC setup. Enhanced Cooling: The motor has cooling fins that efficiently dissipate heat over extended flights. Easy Installation: The motor's user-friendly design makes installation simple and compatible with typical mounting patterns.

HGLRC SPECTER 2806.5 1350KV Brushless Motor for Drones and Aircraft The HGLRC Specter 2806.5 1350KV Brushless Motor for drones and aircraft is engineered to deliver powerful and efficient performance for modern RC applications. Featuring an exact 1350KV rating, this motor achieves a perfect balance between torque and rotational speed, making it highly versatile for different flying styles such as freestyle, long-range, and cinematic flights. Its 2806.5 stator size plays a crucial role in maximizing power output while maintaining efficiency and smooth throttle response. Built with a compact yet durable structure, the motor ensures consistent reliability even under demanding flight conditions. The core function of this brushless motor is to provide stable, responsive, and efficient propulsion, making it an excellent choice for drone enthusiasts and professionals looking to enhance flight performance and control. Features: New rotor look design with an anodized two-color process. 7075 aircraft aluminum, high-strength one-piece rotor. Customized N52H curved magnetic steel with strong magnetism and high torque Super high temperature resistant 200° copper wire winding, the motor works more steadily. Imported Kawasaki silicon steel sheets, low loss stator, minimize heat generation and increase efficiency. ESC:> 45A Recommended propeller size: 6-7 inches. Motor dimensions: Φ34.53mx 19.4mm. New and refined tuning maintains high torque at low speeds, linear power output when the throttle is abruptly changed, and precise and fast reaction when turning. Alloy Steel Outlet Shaft, excellent strength, reduces fuselage weight. Ideal for a 7-inch long-range drone or a 7-inch X8 Cinelifter FPV Drone.

Anycubic Photon P1 3D Printer The Anycubic Photon P1 is an advanced resin 3D printer engineered to deliver near-industrial precision with user-friendly operation. Featuring a high-resolution optical system with over 92% light uniformity, it ensures sharp details, smooth surfaces, and consistent curing across every layer. Its robust mechanical design, including a precision-ground steel build plate and dual-rail Z-axis system, provides exceptional stability and accuracy, making it ideal for professional-grade applications such as prototyping, dental modeling, and intricate design work. Designed for versatility and performance, the Photon P1 supports a wide range of resins, including high-viscosity industrial materials up to 8000 cps. It also introduces advanced technologies such as Wave Release for reduced peel force and a temperature-controlled resin vat for consistent printing even in challenging conditions. With optional dual-material and dual-color printing capability, it enables users to create complex models in a single print, significantly improving workflow efficiency and creative possibilities. Wave Release Technology Wave Release Technology is an advanced innovation designed to significantly improve the reliability and quality of resin 3D printing. It works by optimizing the layer separation process during printing, reducing the peel force required to detach each cured layer from the film. This reduction in force helps prevent common issues such as layer shifting, model deformation, or print failures, especially in complex or delicate designs. Precision-Fitted Industrial-Grade Ball Screw The precision-fitted industrial-grade ball screw enhances the printer’s Z-axis movement by delivering smooth, accurate, and highly stable vertical motion during the printing process. This high-quality component minimizes mechanical backlash and vibrations, ensuring consistent layer alignment and superior print accuracy even for intricate and detailed models. Its robust construction supports long-term durability and reliable performance, making it suitable for continuous industrial use. By maintaining precise positioning throughout each layer, it significantly improves surface finish and overall print quality, especially in high-resolution resin printing applications. Precision-Ground Steel Build Plate The precision-ground steel build plate is engineered to provide a perfectly flat and stable printing surface, ensuring excellent first-layer adhesion and consistent print quality. Its finely machined surface enhances grip for resin prints, reducing the chances of model detachment during the printing process. This high level of flatness and rigidity improves overall accuracy, especially for detailed and high-resolution prints. Built for durability, the steel construction withstands repeated use and maintains its precision over time, making it ideal for professional and industrial applications. Engineered for Ultra-Viscous 8000cps Resin Engineered to handle ultra-viscous resins up to 8000 cps, this feature allows the printer to work efficiently with thicker, high-performance materials that are typically challenging for standard resin printers. It ensures smooth and consistent resin flow, preventing issues like uneven curing or print defects. This capability expands material compatibility, enabling the use of specialized industrial resins for stronger, more durable, and functional prints. As a result, users can achieve higher-quality outputs with improved mechanical properties, making it ideal for advanced engineering, prototyping, and professional applications. Features: High-resolution resin printing with ultra-fine detail Dual-color and dual-material support (optional) LightTurbo 4.0 optical system for uniform curing Wave Release technology for improved reliability Supports high-viscosity industrial resins (up to 8000 cps) Temperature-controlled resin vat for stable performance Intelligent assistant for automated operation Strong and stable mechanical structure Ideal for dental, prototyping, and miniature printing.

HGLRC SPECTER 1202.5 11000KV Brushless Motor for Drones The HGLRC SPECTER 1202.5 11000KV is a high-performance brushless motor for drone applications, engineered to deliver exceptional speed, precision, and efficiency. With a powerful 11000KV rating, it ensures rapid throttle response and smooth flight control, making it ideal for FPV racing and freestyle drones using 3–5 inch propellers. Crafted from 7075 aviation-grade aluminum, this motor offers the perfect balance of strength and lightweight construction. It incorporates N52H magnetic steel to generate strong torque, while the 200°C copper wire winding and Kawasaki silicon steel sheets enhance thermal resistance and minimize energy loss for stable operation. The optimized tuning improves responsiveness, and the durable alloy steel output shaft ensures long-lasting performance. Designed for both performance and aesthetics, this brushless motor for drone stands out with its anodized dual-color rotor, making it a reliable and visually striking choice for drone enthusiasts. Features: New rotor look design with an anodized two-color process. 7075 aircraft aluminum, high-strength one-piece rotor. Customized N52H curved magnetic steel with strong magnetism and high torque Super high temperature resistant 200° copper wire winding, the motor works more steadily. Imported Kawasaki silicon steel sheets, low loss stator, minimize heat generation and increase efficiency. New and refined tune, maintain high torque at low speeds, linear power production when the throttle changes quickly, and precise and fast response when turning. Alloy Steel Outlet Shaft, excellent strength, reduces fuselage weight. 3-5inches Slot pole: 9N12P. ESC:> 10A

Pludo Self Balancing Car – Balance & Motion Learning DIY Kit for Kids Ages 5–8 | Grade 1-3 Kick-start hands-on learning with a self-balancing car children can build from scratch, turning simple parts into real engineering moments that feel like play. This Robotic Diy Kit project guides young makers to assemble a motor-powered car with a battery holder, gears, and wheels, making energy and motion easy to see in a safe, screen-free activity. With clear steps and child-friendly parts, it introduces basic circuits and mechanics while building fine motor skills, problem-solving, and early confidence. The motor drives gears that rotate both wheels, creating smooth forward motion. Balanced force on each wheel keeps the robot stable, showing how motors and gears work together for controlled movement. Perfect for classrooms, makerspaces, and home learning, the kit rolls smoothly to demonstrate balance and cause-and-effect, ideal for demos, STEM fairs, and early physics lessons. Thoughtfully sized for easy storage, it fits naturally into a starter diy kit setup, complements broader diy science kits, and adds variety to any diy car kit collection, encouraging repeat builds and deeper exploration over time. What Your Child Will Learn Build a motorized car and explore how power, gears, and balance work together to create movement. Understand the flow of electricity and how it drives mechanical motion. Strengthen fine motor skills and spatial awareness through guided assembly. Learn the fundamentals of balance, speed, and direction in a fun, interactive way. Boost focus, patience, and creative thinking by experimenting with different setups. Ideal for STEM learning at home, classrooms, or science fairs, encouraging exploration beyond textbooks. Educational Outcomes Electricity & Circuits: Discover how motors and batteries work together to produce motion. Mechanics in Motion: Understand gear movement, friction, and balance in a two-wheel design. Engineering Mindset: Practice logical sequencing, trial and error, and system-based thinking. Fine Motor Development: Enhance coordination and concentration while assembling small components. Confidence Through Creation: Experience the satisfaction of building something functional from scratch. 💡 Did you know? Robots use the same principles of balance and motion control that your two-wheel car demonstrates - it’s the foundation of robotics! Features: Assemble a simple two-wheel car with motor, gears, wheels, and a battery holder for screen-free learning. Introduces basic electricity and mechanics using child-friendly parts and clear instructions. Demonstrates balance in motion as kids observe how power reaches the wheels and drives movement. Helps develop fine motor skills, problem-solving, focus, and confidence through guided tinkering. Perfect for classroom lessons, STEM fairs, or at-home experiments with easy setup and cleanup. Made with lightweight, durable components that allow repeated builds for continued learning.