30A Simonk ESC Controller for Drones The Simonk 30A ESC is an Electronic Speed Controller (ESC) which is used to drive brushless DC motors and is capable of supplying current up to 30A. The 30A Simonk controller is made for quadcopters and multicopters to provide faster and better motor speed control. Suited for quads up to 2.5kg, octos up to 5kg. The ESCs do not overheat, burn or lock out - unline many other ESCs flashed with the SimonK firmware. The ESC motor leads are reduced to simple bullet connectors, this allows for quick and clean installation inside your multi rotor. Compatible with 2S to 3S battery This 30A ESC features a battery eliminator circuit (BEC) that provides 5V and 2A to the receiver or flight controller, so an extra battery to power those is not needed. These electronic speed controllers are best used with A2212 BLDC motors of 1000kv, 1400kv, and 2200kv. Warning: When we connect BLDC ESC directly to the remote control receiver; never ever switch off the remote control before switching off power to the BLDC ESC. Depending on the model of the remote control; it may result in full throttle applied to the motor and it will rotate at full speed. Connections: Power: Red - 7.4V to 14.8V             Black - GND Servo: Yellow - Throttle Input            Red - 5V, 2Amp Out            Brown - GND BLDC Motor: 3 Blue Wires - BLDC ESC Connections SAFE POWER FUNCTION OF THE SIMONK 30A ESC MOTORS High-quality MOSFETs for BLDC motor drive. The throttle calibration function of the Simonk ESC motor helps you to adapt to different remote throttle travel differences and improve throttle response smoothly. It provides low voltage protection as well as reverse polarity protection. It provides protection on the 5v lines. High-performance heat sink for better thermal management.

100A Multirotor ESC Power Distribution Battery Board For Quadcopter The 100A Multirotor ESC Power Distribution Battery Board For Quadcopter simplifies power distribution for your drone, ensuring a streamlined and efficient connection. Crafted from lightweight glass fiber, this board is designed for smaller multirotor builds without compromising on strength. Its compatibility with MK KK flight control systems allows seamless integration with 1-8 ESCs, offering versatility for different configurations. Featuring a robust design, this distribution board can handle up to 20A per output for quadcopters or be adjusted to 10A each for octocopters, showcasing its adaptability. The easy installation, with dimensions of 50x50x2mm and hole spacing compatible with KK 45mm spacing, makes it a convenient choice for drone enthusiasts. Opt for the version with pre-soldered 3.5mm bullet connectors for added ease in your setup. With wide applications, it's perfect for quadcopters, hexacopters, and octocopters, providing a reliable power distribution solution for various drone builds.

SimonK ESC 12A This is the Simonk 12A is a great ESC product DIY Drone enthusiasts and quadcopters. This 12A Brushless ESC motor supports 1-3S Small Axis. This Simonk ESC 12A ESC motor is optimized to achieve the perfect driving effect With low voltage protection, and over-temperature protection.  This Simonk ESC has high performance and powerful functions. Users can set functions according to their needs to fully reflect their intelligent characteristics. Unique circuit design, and strong anti-interference ability. The water-cooled ESC has a limited range of programming functions and is designed to be plug-and-play. The throttle response is fast and has a very smooth speed control linearity. Compatible with scale boats and racing boats. The water-cooling system is composed of high-quality PBC components and has a strong current capacity. It can dissipate heat for the model and reduce noise. The brushless ESC water-cooled electric governor adopts a waterproof design to ensure the safety of the components and prolong their service life. Applications: RC Plane RC Quadcopters RC Boat Package Includes: 1 x SimonK 12A Electronic Speed Controller (ESC) Specifications Brand  SimonK LiPo Battery Input 1 – 3S Continuous Current 12A Burst Current(10S) 15A BEC Mode Linear BEC Output 1A/5V Dimensions  5 x 4 x 3cms  Weight  15 grams

SimonK Red 30A BLDC ESC Electronic Speed Controller with Connectors The Simonk 30A BLDC ESC is an Electronic Speed Controller (ESC) that is used to drive brushless DC drone motors and is capable of supplying current up to 30A. The 30A Simonk controller is made for quadcopters and multicopters to provide faster and better motor speed control. This ESC 30A features a battery eliminator circuit (BEC) that provides 5V and 2A to the receiver or flight controller, so an extra battery to power those is not needed. These electronic speed controllers are best used with A2212 BLDC motors of 1000kv, 1400kv, and 2200kv. CONNECTIONS: Power: Red - 7.4V to 14.8V             Black - GND Servo: Yellow - Throttle Input            Red - 5V, 2Amp Out            Brown - GND BLDC Motor: 3 Blue Wires - BLDC ESC Connections Safe Power Function of the Simonk 30A ESC Motors High-quality MOSFETs for BLDC motor drive. The throttle calibration function of the Simonk ESC motor helps you to adapt to different remote throttle travel differences and improve throttle response smoothly. It provides low voltage protection as well as reverse polarity protection. It provides protection on the 5v lines. High-performance heat sink for better thermal management.

Simonk Red ESC 30A without Connector for Quadcopter The Simonk 30A ESC is an Electronic Speed Controller (ESC) which is used to drive brushless DC motors and is capable of supplying current up to 30A. The 30A Simonk controller is made for quadcopters and multicopters to provide faster and better motor speed control. This 30A ESC features a battery eliminator circuit (BEC) that provides 5V and 2A to the receiver or flight controller, so an extra battery to power those are not needed. These electronic speed controllers are best used with A2212 BLDC motors of 1000kv, 1400kv, and 2200kv. Warning: When we connect BLDC ESC directly to the remote control receiver; never ever switch off the remote control before switching off power to the BLDC ESC. Depending on the model of the remote control; it may result in full throttle applied to the motor and it will rotate at full speed. Connections: Power: Red - 7.4V to 14.8V             Black - GND Servo: Yellow - Throttle Input            Red - 5V, 2Amp Out            Brown - GND BLDC Motor: 3 Blue Wires - BLDC ESC Connections SAFE POWER FUNCTION OF THE SIMONK 30A ESC MOTORS High-quality MOSFETs for BLDC motor drive. The throttle calibration function of the Simonk ESC motor helps you to adapt to different remote throttle travel differences and improve your throttle response smoothly. It provides low voltage protection as well as reverse polarity protection. It provides protection on the 5v lines. High-performance heat sink for better thermal management. Application: Quadcopters. Multirotor drones. RC Planes. PACKAGE INCLUDES: 1 x Simonk Red ESC 30A without Connector Specifications: Brand  Simonk Current Rating  30A BEC 5V 2A Suitable Batteries 2-3S LiPo Recommended BLDC Motors  A2212 brushless motor (1000kv, 1400kv, 2200kv) Dimensions 45 x 24 x 11mm Weight 32 grams

40 AMP ESC - Yellow Brushless Motor ESC is the perfect solution for drone enthusiasts and hobbyists. It excels in providing better flight control with its advanced BLDC technology. Crafted with top-quality materials, this speed controller ensures durability and optimal performance under ideal conditions. Suitable for motors consuming up to 40A current, it works on 2S-3S LiPo batteries and includes an onboard BEC for regulated 5V power. Brushless Motor ESC is not just a speed controller; it's a key component for endless possibilities in the world of drones. Made for ease of use and maintenance, it is the ideal choice for both beginners and experienced users. Add it to your cart now and experience the difference!