0.9V-5V to 5V DC-DC USB Step Up Power Boost Converter Module The USB converter modules produce an output of 5V and feature an LED indicator. It can be used in various applications like mobile phone, pad, GPS, automobile data recorder and Bluetooth device. Step-up Module with 0.9-5V input, output 5V for many digital devices, so this is really a great module for designing a portable charger. Useful for your USB charger projects and onboard USB device supply solutions. (ie GoPro cameras) You can supply it with single-cell LiPO or an AA size battery or others. Two AA batteries can output a current of 500 ~ 600MA, a single AA battery power supply can output 200ma current supply, great for mobile phones camera, single-chip, and digital products supply. check out : 0.9V-5V to 5V 600MA USB Output charger step up Mini DC-DC Boost Converter Applications: USB voltage regulator for USB-powered device. This module will bring the USB voltage required for your application at regulated 5V output. Various USB devices need 5V from low voltage batteries. Charge mobile phone/MP4/MP3 from AA battery when traveling

5V 1 amp DC jack Adapter 5 Volt 1 Amp Power Adapter takes an AC INPUT of 100-270VAC and gives 5V 1A DC output Features Excellent Quality Short Circuit, Over Voltage & Over Current Protection Incredibly Low Fault Rates No Minimum Load This power supply is a regulated Center Positive power supply It's plug design is for Indian power socket so, no plug converter is required Compact size & light weight High Reliability Regulated Stable Voltage Good quality SMPS Based Adapter Stabilized Output, low ripple & low interference Single Output Voltage High Efficiency & low energy consumption check out : 5V 2Amp Single Jack Adapter

IOTIF Trainer and Prototype Board What is an IOTIF Trainer Kit? The IOTIF trainer kit is an electronic trainer kit consisting of three micro-controllers: Raspberry Pi 5 8GB (with SD Card and pre-installed Raspbian OS), Arduino Nano and ESP-01; and a variety of sensors and actuators like Buzzer, LED, RGB LED, Relay, Ultrasonic sensor, Light Dependent Resistor (LDR),  Passive Infrared Sensor (PIR sensor), Humidity and Temperature sensor (DHT-11), Servo motor, Stepper motor, Bluetooth module (HC-05), Liquid crystal display (LCD), Joystick and a Membrane Keypad. How did the IOTIF Trainer Kit come into existence? The IOTIF trainer kit was a grand collaboration between TIF Labs and the CISCO support team and was designed with the objective of spreading awareness among Professors and students on the importance and applications of IoT. In 2017, it was launched at the ‘CISCO Academy National Conference 2017’ held in India, after which TIF Labs kickstarted the manufacturing, supplying and wholesaling of the IOTIF starter kit to educational institutes and training facilities. The kit was highly appreciated by the dignitaries of CISCO and the Professors from all across the country. Why is IOTIF necessary for Engineering students? IOTIF Training and Prototype board was designed to bridge the gap between theoretical knowledge and practical implementation by simplifying the process and eliminating the hassles of the hardware connection. The Trainer kit was designed by keeping in mind the current industry trends and standards and gives the user the best of both worlds, embedded systems and IoT. IOTIF trainer kit would set up the perfect stage for graduating engineers who are interested in developing IoT and embedded systems. This trainer kit is in sync with the latest industrial requirements, which improves the skill set of students and increases their employability. What makes IOTIF an integrated system of microcontrollers? The intercommunication of the Nano board and Raspberry Pi board with the different modules provides an integrated system and gives the IOTIF Trainer Kit an edge. For example; Nano Board can be integrated with ESP-01 to make it Wi-Fi enabled. On the other hand, Raspberry Pi can make use of its on-board WiFi module. The two modules can be programmed to interact with each other, servers and Cloud. Thanks to IoT, the data can be accessed using mobile apps or browsers from any part of the world. Where is the IOTIF LAB set up in India? Since the objective of setting up the IOTIF Lab is to educate and train Professors on the subject on the Internet of Things, IOTIF Labs have been set up in various education institutes, Universities and Labs. Recently, IOTIF was set up in NBKR Institute of Science and Technology. Apart from this, the IOTIF Lab was also set up in the following institutes: Sona Institute of Technology Trident Academy of Technology Swarnandhra Institute of Engineering & Technology Gokhale Education Society's R. H. Sapat College of Engineering Karunya University MSME Tool Room As the developers of IOTIF trainer kit, we will provide you with end to end lab set up and faculty training on how to use the trainer kit. Our top technicians and developers will assist you with the training of the product with its applications on real-life problems. Also check Full Stack IoT Lab by Iotcart. It is currently on sale at a discounted price of Rs. 999,999, marked down from Rs. 1,500,000. The lab includes various components and modules for IoT and robotics development, such as ESP 32 modules, sensors, actuators, motors, 3D printer, smart home components, measurement instruments, and more On-Board Components of the IOTIF: The IOTIF training kit is integrated with state-of-the-art microcontrollers, development boards, Wi-Fi boards, Bluetooth modules and sensors that are compatible with each other. Raspberry Pi 5 8GB x 1 SD Card x 1 Nano Board compatible with Arduino x 1 PIR Sensor x 1 HCSR04 Ultrasonic Sensor x 1 DHT11 Sensor x 1 PS2 Joystick Module x 1 ESP8266 x 1 Bluetooth Module x 1 4 x 4 Membrane Keypad x 1 Relay Module x 1 Breadboard x 1 LED x 1 RGB LED x 1 16 x 2 LCD Module x 1 Stepper Motor x 1 Servo Motor x 1 Raspberry Pi 5 Active Cooler x 1 Here is a Demo to get a deeper understanding of the IOTIF Trainer Kit:

160mm Aluminium CPU Heatsink This is a 160mm Long Aluminium Water Cooling Block Liquid Cooler Waterblock Radiator-GPU CPU Cooling Heatsink.  The CPU heatsink has a solid construction and choosing aluminium as the raw material is a wise option for heat dissipation. The surface of the heatsink is treated by the method of silver oxidation. It is suitable for cooling graphics GPU, motherboard Northbridge Southbridge CPU, graphics; semiconductor cooling piece, industrial cooling, etc. The CPU heatsink is a water cooling block where the heat dissipation method of that the liquid conducts the cold and heat exchange. Features: High Thermal Conductivity: Made from aluminum, which is an excellent conductor of heat. Large Surface Area: The 160mm size provides a large surface area for effective heat dissipation. Lightweight: Aluminum is lightweight, making it suitable for various applications without adding significant weight. Durable: Resistant to corrosion and can withstand high temperatures. Easy Installation: Designed for easy mounting on CPUs. Efficient Cooling: Helps maintain optimal operating temperatures and prevent overheating. Applications: Computer Systems: Used to cool CPUs in desktops, servers, and workstations. Gaming Rigs: Helps maintain optimal temperatures in high-performance gaming PCs. Industrial Equipment: Applied in industrial computers and control systems to prevent overheating. Power Amplifiers: Used in audio and RF power amplifiers to dissipate heat. LED Lighting: Helps manage heat in high-power LED lighting systems. Consumer Electronics: Used in various electronic devices that require efficient thermal management.

Raspberry Pi USB Micro-B to USB-C Adapter The Raspberry Pi USB Micro-B to USB-C Adapter allows you to convert an existing micro USB power supply (like the into a USB-C power supply. Itt is designed to connect micro USB B type to Type C port devices like latest IoT Development Boards in robotics and DIY projects as well as for All latest Smartphones, Tablets and Laptops. This tiny adapter can solve the problem of buying and keeping different Charger/adapters for your C-type port gadgets. With the help of this converter, you can easily use your old Power supply with the Micro USB plug. It is simply plug and play converter. So no external driver or software installation needed. It works in both directions and supports high-speed data transfer speed for which C-type port is known. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi USB micro b to usb c adapter online from Iotcart at the comfort of your homes.

12V 15A Power Supply SMPS This industry power module SMPS converts AC power to 12V 15A DC. It has built-in over-voltage, over-current, and short circuit protection. Perfectly designed and well constructed, small and compact Size with an indicator. This is the switched-mode power supply (SMPS) which converts 100 - 264V AC to 12V DC. It can provide up to 15A maximum current. All types of protections such as over-voltage protection, over-current protection, short circuit protection, and surge-protected output, are provided in the supply. These 12V 15 Amp power supply achieve high efficiency and are robust to use; By using these latest 12 Volt 15 amp power supply, you can reduce your electricity bill. This SMPS will provide you with a constant output of 12V 15A means we can drive applications that have a maximum current rating up to 15A. It includes any type of motor with different RPM, thermoelectric Peltier, etc. It has passed the CE & RoHS certification. This power supply is built with high-quality and high-performance materials. This SMPS power supply has an LED power supply with a metal body for hidden installation for LED lighting. Features: Converts AC power to 12V 15A DC Built-in over-voltage, over-current, and short circuit protection Small and compact size with an indicator Suitable for various applications including servers, power stations, personal computers, vehicles, factories, industries, railway and security systems, and mobile devices LED power supply with metal body for hidden installation. Applications: Servers, power stations, and personal computers. Vehicles for charging batteries. Factories and industries for power. Used in the equipment used in railway and security systems. It is also used in mobile and also as lighting.

Electronics Kit (Computer Science) for Grade 7 The components included in the electronics kits for computer science purposes and applications are manufactured and curated with the best quality. The components of the kit are listed below with their quantity. Small DC Motor: A DC 3V Mini Motor For Arduino DIY Smart Car. this DC 3V Mini Motor For Arduino DIY Smart Car is used in making science projects for school. LED: 5mm Clear LEDs. These are the very common LEDs that are used in all types of electronic projects. 2 AA Batteries Holder: Black Plastic Storage Box Case for 2 x AA Battery Cells, without Cover. The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for devices that need a 3V external battery. Wire: The High-Quality Wire 1m (Black) + 1m (Red) pair has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. Ideal for your project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Mini Breadboard: The 170 Points breadboard is named for its 170 tie points. It has 17 columns of 10 holes, which are separated into two pairs by a central notch, and labeled 1 to 17. It comes with the adhesive back for easy attachment with the application. They're useful for basic prototyping. They are the modern breadboards, a plug-and-play way to make connections between electronic components. 220 Ohm Resistor: An electrical component that limits or regulates the flow of electrical current in an electronic circuit.

DIY Human Gesture Detection Science Experimental STEM Kit Toy The DIY Human Gesture Detection STEM Kit is an innovative hands-on learning toy that introduces children to the exciting world of gesture-based technology through play. Designed to develop essential STEM (Science, Technology, Engineering, and Mathematics) skills, this STEM kit encourages kids to explore, build, and understand how human gestures can interact with electronic systems. Perfect for school projects or at-home learning, this engaging DIY kit promotes critical thinking, creativity, and problem-solving while keeping kids away from screens. A great choice for parents and educators, this STEM toy for kids offers a fun and educational way to inspire curiosity and build confidence in young learners.

STEM Innovation kit - Hands-on Learning, Problem Solving, Creativity, Robotics, Programming Explore the thrilling world of STEM with our  Kit, designed to spark curiosity and unleash creativity in budding engineers, innovators, and problem-solvers. Perfect for schools, training centers, and STEM labs, this all-inclusive kit is your gateway to hands-on learning and tech exploration. At the core of our kit is the Arduino Board, a user-friendly microcontroller platform known for its simplicity and versatility. Paired with essential components like USB cables, LEDs, resistors, and a breadboard, learners have everything they need to turn their ideas into reality. But the excitement doesn't end there. Dive into robotics and environmental monitoring with a range of sensors including ultrasonic, humidity, temperature, and PIR motion sensors. Whether it's creating a smart car or building a weather station, the potential for innovation is limitless. Foster creativity with micro servo motor, LCD display, and potentiometer, allowing learners to engineer intricate projects with precision. From electric reptile robots to solar-powered Ferris wheels, each component serves as a building block for mastering technology. More than just gadgets, our Kit teaches vital life skills. Through hands-on experimentation, students develop soldering, circuitry, and electronics handling skills, preparing them for the challenges of the digital future. With compatibility with expansion kits like our DIY remote-controlled car model and 3D pen, the learning journey never ends. Encouraging collaboration and pushing the boundaries of innovation, students unlock their full creative potential. Embark on a journey where learning knows no limits. With our Kit, the power to shape the future of technology is in your hands. Let's create a world where curiosity reigns supreme and every problem is a chance for innovation.

Raspberry Pi Carbon Removal Credits Raspberry Pi Carbon Removal Credits help customers offset their devices' carbon footprint. Each credit funds 6kg of carbon removal through UNDO Carbon’s enhanced rock weathering, a sustainable carbon absorption method. These card-sized credits come with unique serial numbers for verification. Available as an optional add-on at checkout, they support Raspberry Pi’s commitment to eco-friendly technology. Features Offsets 6 kg of carbon for each credit bought. Utilizes enhanced rock weathering, a reliable carbon absorption method. Comes as a unique credit card with verifiable serial numbers for transparency. Optional sustainability upgrade during checkout. Supports Raspberry Pi’s eco-friendly manufacturing and disposal efforts.

DIY RC Boat Kit Don't let your kid's curiosity be limited to paper boats! Get him the Boat Ship kit which will build his assemblage skills and increase his knowledge about motors, propellers and basic information about water transport. Fix this engine on your designed ship/hovercraft and let it glide through the water! Play , Learn and Grow with our motorboat DIY kit for children (4 yrs onwards). This motorboat is a very fascinating & fun thing to make. It floats and moves on the water. One can even use a bucket or a bathtub to have fun with this project. It’s a very simple to assemble project for children, very engaging and educative. Our products do not require soldering & are plug and play. It is great to introduce simple circuitry to children. This is a must-have kit. Method of use: Using the foam board (hull of other materials as well), making a hull, use this module installed on the hull (Fixed in various ways such as using screws or adhesive tape), to ensure that all or part of the propeller in the water, after the power it can be used Key Features: Made of premium  material, Durable and reliable. Easy for assemble, cultivate kids hands-on ability and learn science knowledge. Wireless RC car, remote control forward and back without turn function Premium electronic components and accessories with stable performance, safe play.

3 in 1 3D DIY Green Safe Energy Driven Dinosaur 3 in 1 DIY Solar Powered Driven Dinosaur Robot Toys for Kids is good for 6+ kids to learn the assembling of robots and how solar energy works. This solar power driven toy is designed for children to use their imagination to assemble the parts into different creative combinations, helping them fall in love with learning. It can be combined to form dinosaurs, robots, drills, and insects for little scientists and children who love DIY. More importantly, these assembled models can move in the sun with the power-efficient solar panel.

12V 5A SMPS 60W DC Metal Switch Mode Power Supply This industry power module SMPS converts AC power to 12V 5A DC. It has built-in over-voltage, over-current, and short circuit protection. Perfectly designed and well constructed, small and compact Size with an indicator. This is the switched-mode power supply (SMPS) which converts 100 - 264V AC to 12V DC. It can provide up to 5A maximum current. All types of protections such as over-voltage protection, over-current protection, short circuit protection, and surge-protected output are provided in the supply. These SMPS are achieved high efficiency and robust to use; By using these latest SMPS, you can reduce your electricity bill. This SMPS will provide you with a constant output of 12V 5A means we can drive applications that have a maximum current rating up to 5A. It includes any type of motor with different RPM, thermoelectric Peltier, etc. It has passed the CE & RoHS certification. This power supply is built with high-quality and high-performance materials. This SMPS power supply has a led power supply with a metal body for hidden installation for led lighting Applications: It is used in servers, power stations, and personal computers. It is used in vehicles for charging batteries. It is used in factories and industries for power. It is used in the equipment used in railway and security system. It is also used in mobile and also as lighting.

DIY Solar Powered Ferris Wheel Kit Along with teaching your kid about assembly, motors and batteries, add a perfect showpiece of your kid's invention at your home! Learn to harness the power of solar to ferry the wheel which can be converted into a solar powered Fan. Solar Ferris Wheel is a creative solar toy. It uses sunlight to generate electricity and drives the blue turntable to rotate tirelessly. It is vivid and creative, It can be used to effectively decorate your ship and entertainment platform, and also great for living room, bedroom, office and so on. Can be used as a small decorative item in the home, indoors or outdoors. It is a handmade model, and all made of environmentally friendly abs plastic materials, the solar energy Ferris wheel can be used as a toy for children, and it can also be used as a gift for children. Features: It's an educational toy set which is great for kids training their intellectual development, hands-on brain, interest in culture, grip, hand-eye coordination. Parents can DIY with their kids and promote their parent-child communication in the process of assembling. It is very easy to install and does not require special tools. Lightweight and portable, unisex for all ages The finished toy can turn with sunshine . Under direct sunlight, the use of solar energy, can be slowly rotated (rainy days and indoor solar function can not be used) Exquisite workmanship, but also as a peculiar and unique crafts indoors. Package includes several sets of white pillars , and vary in length , you can choose the appropriate combination according to personal preference , to produce a dozen different combinations of rotating disk , you can install the 8 ball can also be installed 4 balls. Also check Windmill DIY Kit offered by ROBOCRAZE. The DIY kit is designed for children aged 3 and above, providing a fun and educational project to construct a windmill. It includes components such as a 2-Pin SPST Switch, 9V battery with a battery cap, toy motor, and a small plastic fan. The windmill can also function as a mini fan.

Samsung ARTIK 055s SoM SIP-KITNXH002 - Development Board Samsung ARTIK 055s Starter Kit / SIP-KITNXH002 development board speeds the development of the Internet of Things (IoT) projects. The ARTIK 055s Starter Kit has built-in robust security, compactness, and connectivity. A dedicated 5-12VDC power supply (not included) or a micro-USB connector deliver power to the kit. The ARTIK 055s module is included in the starter kit, mounted to an interposer board, as well as an ARTIK starter board. ARTIK 055s development kit contains ARTIK 055s module and embedded evaluation board. Samsung ARTIK 055s module is a highly integrated module for secure Internet of Things (IoT) devices that require Wi-Fi connectivity. It is based on an ARM Cortex R4 core with on-module RAM and flash memory, a complete 2.4GHz Wi-Fi subsystem with on-module antenna, an independent security subsystem, PUF-based module authentication and a large complement of standard I/O interfaces. Features: Easy onboarding to ARTIK Cloud with Samsung's mobile reference app Arduino-form factor interface headers Expanded GPIO headers with exposed SPI and UARTs Onboard reset and Arduino reset buttons Onboard test buttons and LEDs (two each) Micro-USB connector for power and programming Applications: Wireless Connectivity WiFi with IOT