10-Pin Alligator Clip to Male Jumper Wire for Test Lead (20 cm) Alligator clips and insulated clips are hardware products that clip onto and easily connect terminals and lead wires. The clip part that attaches to the terminal or lead wire on the alligator clip is uncovered. They are available in smaller sizes for low-voltage applications to large sizes for high-voltage applications. Insulated clips have insulation material, such as vinyl, wrapped around them and are mainly used in low-voltage applications. Both types are available with full insulation covering for safe operations.  A 10-pin connection cable with a length of 20 cm, with a male pin plug on one side and alligator clips on the other. Perfect for the construction of prototypes of devices for temporary connection of signals. These wires are ideal for bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! It is insulation-covered clips connected at one end and a DuPont Male connector at another end. It is useful in electrical or laboratory electric testing work. Alligator clips are frequently used in school physics laboratories to quickly and cheaply assemble circuits. They are very useful for connecting components to wires. Alligator clips can also be used as miniature clamps to hold parts together. In addition, it is also useful for gluing wires together for soldering. Easy for installation and safety for use with the insulation with five different colors in pair soft plastic insulation cover.  Applications: Used in Electronic Projects Prototyping for testing the connections Can be used with Arduino, or Raspberry Pi  to check the connection Temporarily secure and hold wiring connections together for testing and maintenance purposes in PCBs or Breadboards. Package Includes:  10 x Alligator Clip to Male Jumper Wire for Test Lead (20 cm) Specifications: Type Alligator to Male Pin Wire Length (cm) 20 Inner material Copper Outer Material PVC

Solderless Breadboard Jumper Wire Connectors  This 140 pcs U Shape Solderless Breadboard Jumper Cable Wire Kit contains 140 jumper wires ready for solderless breadboarding. It comes in 14 different lengths and 8 colors to keep your circuit on the surface. This will keep your projects neat and organized and will save you from stripping cables each time. Length of the line is not the same length, the length of the line, a total length of 14 lengths 10 each, a total of 140,  Package Includes: 140 x Jumper Wires Specifications Number of Jumper Wires  140  Colour  Red, orange, yellow, green, blue, purple, gray, brown, white Box Dimensions  165 × 55 × 10mm Weight  50 grams

Jumper Wire Set - M2M, M2F, F2F (40 pcs each) Ribbon Jumper Wires (Pack of 120) is a premium quality Connectors & Jumpers. Iotcart is a well-known eCommerce platform for a qualitative range of Connectors & Jumpers. All Ribbon Jumper Wires (Pack of 120) are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The cables can be separated into single roots as you request to do multiple connections. Widely used in electronic projects for connections. It can be used for the expansion of the experimental board pin and to increase experimental projects. You can quickly conduct circuit testing without welding. It can be reused if the terminal is not damaged. The materials utilized to manufacture Ribbon Jumper Wires are sourced from the most reliable and official Connectors & Jumpers vendors, chosen after performing detailed market surveys. We are Dedicatedly involved in providing an excellent quality array of Jumpers Wires. Applications: Making Temporary Connections using Breadboard Used to create junction between Microcontroller and Sensors using breadboard externally. Electronic Experiment Prototyping Connecting with Berg Strip Headers Package Includes: 40 x M2M Jumper Wires 40 x M2F Jumper Wires 40 x F2F Jumper Wires Specifications Number of Jumper Wires  120 Cable Length 20cms Dimesniosn  11 x 9 x 5cms  Weight  100 grams

Solderless Breadboard + Jumper Wires (140pcs) 140 pieces solderless breadboard jumper cable lead kit Hard wire with angled shape, A transparent plastic box for convenient to carry and not easy to lost Distribution strip, Tie-point 200, Terminal Strip, Tie-point 630 Completely reusable.  Package contains: 1 x Solderless breadboard  140 x Jumper Wires Specifications Breadboard Type  Solderless Breadboard Number of Jumper Wires  140  Package Dimensions  165*54*10mm Weight  50 grams

Male to Male Jumper Wires (20cm) 40pcs These are Breadboard Jumper Cable Wire (20cm) 40pcs, which are multipurpose use and very handy. Quick prototyping and testing excellent connector. These DuPont cables are generally used for connecting FRC pins, Header pins, Berg pins, etc. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Male to male Dupont/Jumper Wire is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, pc motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again. Package Includes: 40 x M2M Jumper Wires Specifications: Connector Type  Male to Male  Lenght of wire  20cms  Number of wires  20  Dimensions  5 x 4 x 3cms  Weight  50 grams

20cm 20pcs Male to Female Jumper Wires These Male to female jumper wires are best for any electronic prototyping and testing project. They allow for easy and convenient interconnection between components without the need for soldering. These wires come in groups or cables with connectors or pins at each end and are commonly used for connecting FRC pins, Header pins, Berg pins, and other components. These wires are also useful for connecting components on a PCB project or a PC motherboard. Their easy plug-and-play design makes it possible to test different component configurations quickly without the need for permanent connections.  Switch to our male to female jumper/Dupont wires and say goodbye to messy wires and complex setups. Applications: Raspberry Pi Arduino PCB projects Breadboard connections Package Includes: 20 x F2M Jumper Wire Specifications Connector Type  Female to Male Length of wire  20cms  Number of wires  20  Dimensions  5 x 4 x 3cms  Weight  50 grams

Female to Female Jumper Wires (20cm) 40pcs These are 20cm 40pcs Female to Female Jumper wires, very Flexible and easily detachable. These jumper cables have 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their end connectors into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly Dupont cables are useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini PCs and development boards. It is very useful in the PCB project, PC motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again. Applications: Raspberry Pi Arduino PCB projects Breadboard connections Package Includes: 40 x F2F Jumper Wires Specifications Number of Wires 40 Length of the cable  20cms  Connector Type Female to Female (Socket to Socket) Dimensions  5 x 4 x 3cms  Weight  25 grams

Male to Female Jumper Wires (20cm) 40pcs Female to Male jumper wires are multipurpose use and very handy. Quick prototyping and testing excellent connector. Generally used for connecting FRC pins, Header pins, Berg pins etc. These jumper wires are electrical wires or groups of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Mostly Female to Male jumper wires are useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini pc and development boards. It is very useful in the PCB project, PC motherboard, as well as Breadboard connections. Additionally, it allows you to plug and unplug easily for prototyping and can be used over and over again. Applications: Raspberry Pi Arduino PCB projects Breadboard connections Package Includes: 40 x F2M Jumper Wire Specifications Connector Type  Female to Male Length of wire  20cms  Number of wires  40  Dimensions  5 x 4 x 3cms  Weight  50 grams

Male to Male Type Jumper Wires (20cm) (20pcs) These male-to-male Jumper/Dupont Wires are for multipurpose use and are very handy and best for quick prototyping and testing. These Dupont Cables are used for connecting FRC pins, Header pins, Berg pins, etc. Made from high-quality wires and these are the best in the market for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other components without soldering. Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other mini PC and development boards. It is very useful in the PCB project, PC motherboard, as well as Breadboard connections. Also, it allows you to plug and unplug easily for prototyping and can be used over and over again. Key