A2212 1400KV BLDC Motor and Simonk 30A ESC with 1045 Propellers for RC Drones The product pack features a 1400kv brushless motor, SimonK 30A ESC, and a set of 1045 propellers. The 1400KV brushless motor for drones and quadcopters is constructed with a solid metal case that is capable of withstanding tough weather conditions. The solid metal case of the brushless motor is made with a steel design that makes the drone motor reliable and strong. The A2212 brushless drone motors are integrated with good-quality pre-soldered connectors. This helps users to easily connect to the ESC. The SIMONK 30A ESC is specifically designed to provide a faster and better flight experience for drones, quadcopters, and multi-rotor systems. The characteristic feature of the Simonk ESC is that it has protection against backward polarity and protection for the 5V receiver line. What this means for the user is that, even if you attach a battery backward, accidentally, this protection feature will not destroy the motor controller and other BECs. The set of 1045 drone propellers is manufactured with an epoxy resin cover. They are a set of strong and lightweight propellers that are well-suited for lower RPM motors and slow-flying drone models. The 1045 propeller set includes one anti-clockwise and one clockwise propeller. The propellers are designed to provide the best aerodynamic efficiency and great lifting capacity. Note : The package weighs 200 grams (approx) and Dimensions: 15 x 9 x 5cms (approx) Experience smooth power delivery with the SimonK 30a BLDC ESC .

A2212 2450KV BLDC Motor for RC Drones and Quadcopters This is A2212 (BLDC) Brushless DC Motor of 2450KV, a high-speed brushless motor designed specifically for Quadcopters, Drones , or toy planes. This brushless DC motor is an outrunner-type motor, which means that the outside case rotates while the inside stays fixed. This A2212 2450Kv brushless motor is perfect for small DIY drones and planes. The 2450Kv brushless motor is best used by DIY enthusiasts and hobbyists when the drone or quadcopter project involved is a low-cost project. You can use this brushless motor when there is a 3 phase connection in order to control the the speed of motor more accurately and smoothly. If you want to Build a Quadcopter for your own you can do it too. For that you need S.no Component 1 Drone frames 2 Flight Controller (FC) 3 ESC or Electronic Speed Control 4 RC transmitter & receiver 5 Power Distribution Board 6 Propellers 7 Battery and charger About BLDC Motor: BLDC Motor (Brushless direct current electric motors), also known as electronically commutated motors, are available (ECMs, EC motors). Primary efficiency is a critical feature of BLDC motors. Because the rotor is the sole magnet bearer and does not require any power. That is, there are no connections, no commutator, and no brushes. Instead, the motor makes use of control circuitry. BLDC motors use controllers, rotary encoders, or a Hall sensor to detect where the rotor is at any given time. Outrunner: The field magnet is a rotating drum rotor that revolves around the stator. This style is preferred for applications that require high torque but do not require high rpm. These are the motors found on photography multirotors, such as high-powered drones. Brushless DC motors(BLDC) look different depending on who makes them, but they are typically short and stout. Brushless multirotor propellers are almost always mounted directly to the motor shafts. Pros: BLDC motors or Brushless DC motors are extremely powerful and provide excellent torque without the use of gears. They also have a long lifespan if properly maintained. Brushless motors can operate for much longer periods of time without suffering heat damage than coreless motors (the heat may temporarily reduce the performance of brushless motors, to a degree, but once they cool down, their performance should revert to normal.) Find out our various collections of ESC for Drones . Features: High KV Rating: 2450KV, which means it spins at 2450 RPM per volt. Brushless Design: Offers better efficiency and longer lifespan compared to brushed motors. High Performance: Suitable for high-speed applications in RC aircraft and quadcopters. Lightweight: Designed to be lightweight, making it ideal for aerial applications. Durable Construction: Built to withstand the demands of high-speed flight. Versatile Use: Can be used in various RC models like fixed-wing aircraft, quadcopters, and hexacopters. Shop the SimonK 30a BLDC ESC for ultimate motor control. Applications: Drones Quadcopters Multirotor's RC Airplanes UAV

Dronacharya Vikas R&D DIY RC Drone Kit for Engineering Students and Researchers The Dronacharya Vikas R&D DIY RC Drone Kit is a comprehensive and versatile drone assembly kit designed to empower students, educators, and innovators in exploring UAV technology. Whether you are working on academic projects, developing prototypes, or researching autonomous systems, this DIY drone kit offers an immersive hands-on experience in drone integration, control mechanisms, and sensor applications. As a complete RC drone kit, it enables users to gain practical knowledge while fostering innovation in aerial robotics and research-based applications. Seamless integration & Open Source Suitable for smooth physical and logical integration of add-ons and payloads. (SRS) Steady, Robust, Safe Suitable for novice pilots and expert R&D projects. Swift & Easy, Assembly & Maintenance A well-designed drone decreases complexity across its entire lifecycle, from setup to operation. Features: Pixhawk-based Flight Controller for accurate navigation and autonomous control Supports the UART, I2C, and MAVLink protocols for smooth communication. ROS 2 and Simulation Software Suitable for cutting-edge autonomy research. Sensor Integration: Ultrasonic, LiDAR, GPS, IMU Ground Control Software: Supports Mission Planner and QGroundControl (QGCS). Modular design with customizable payloads and drone configurations. Introducing Dronacharya Vikas R&D DIY RC Drone Kit Applications: Engineering students and researchers. UAV development and autonomous system testing. STEM Education and Drone-Based Learning Environments This Kit Includes: 1 x Flight Controller: Radiolink MiniPix A compact and cost-effective flight controller based on the Pixhawk architecture, ideal for research and educational drones. Technical Specifications: Processor: STM32F427 32-bit ARM Cortex M4 core with FPU IMU: MPU6500 accelerometer/gyroscope Barometer: MS5611 Magnetometer: External required (GPS unit supports this) Input Voltage: 4.8V – 5.5V Communication Interfaces: 1 x UART (telemetry), 1 x USB, I2C, PPM, SBUS, PWM output Firmware: Supports PX4 and ArduPilot Weight: ~15g Form Factor: Compact and lightweight, ideal for small drones 1 x GPS Module: Radiolink TS100 High-performance GNSS module with integrated compass for accurate global positioning and navigation.. Technical Specifications: GNSS Systems: GPS, GLONASS, Beidou Positioning Accuracy: ±2.5 meters (horizontal) Refresh Rate: 10 Hz Compass: Built-in digital compass (HMC5883L) Communication: UART and I2C Operating Voltage: 5V DC Antenna: Ceramic active antenna LED Indicator: Satellite fix status Weight: ~20g Mounting: Includes anti-vibration mount and cable 4 x Brushless Motors: 920KV 2212 (2 CW + 2 CCW) KV Rating: 920KV Configuration: 14 Poles / 12 Slots Max Current: ~15-18A Mounting Hole Distance: 16mm x 19mm Propeller Compatibility: 8”–10” props Shaft Diameter: 3.17mm Weight: ~55g each 4 x Electronic Speed Controllers: Hobbyking 20A ESC (Custom Vikas Connectors) Max Current: 20A continuous, 25A burst (10s) BEC Output: 5V / 2A Linear Firmware: Custom firmware compatible with SimonK/BLHeli Connector: Proprietary Vikas plug-in system for easy swaps 4 x Motor Mounts (Molded Plastic Shells) Custom-designed heavy-duty motor mounts made from durable molded plastic Withstand vibration and mechanical stress Allow for fast, tool-less replacements 8 x Arm Bases (Custom Vikas Shell) Precision-molded hard plastic that securely holds the frame together Designed to fit modular carbon arms and ensure easy maintenance 4 x Carbon Fiber Arms (Custom-Made for Vikas) Lightweight yet highly rigid Designed for modular swapping and high endurance Mounting compatible with Vikas motor mounts and bases 4 x Carbon Fiber Landing Poles Shock-absorbing landing gear Carbon fiber structure ensures durability during repeated takeoffs/landings 1 x Top Plate (Universal Integration Platform) Designed for wide compatibility with various drone components Supports multiple battery sizes and payloads CNC-cut for precision and flexibility in mounting 1 x Bottom PCB (Proprietary R&D Enabler) Designed specifically for R&D and prototyping Integrated voltage rails: 5V, 3.3V, and 12V outputs Power distribution for ESCs, sensors, onboard computers (Raspberry Pi, Jetson Nano, etc.) Solder pads and headers for custom circuit integration 1 x 2200 mAh Li-Po Battery Voltage: 11.1V (3S) Capacity: 2200 mAh Discharge Rate: 25C – 35C Connector: XT60 1 x Li-Po Balance Charger Supports 2S–3S Li-Po batteries LED indicators for cell balance and charging completion Over-voltage and over-current protection 1 x Set of Consumables Zip ties, double-sided tape, Velcro straps For cable management and secure mounting 1 x Fasteners Kit for Vikas Screws, bolts, and nuts compatible with all parts of the Vikas drone Stainless steel and anodized aluminum mix 1 x 2.5mm Allen Key Provided for assembly and maintenance 1 x Set of Silicon Landing Caps Soft end caps for landing poles Reduces vibration and wear during landings 1 x Propeller Set (CW & CCW) 2 x Clockwise and 2 x Counterclockwise Balanced for smooth flight and efficient thrust

E99 Pro Foldable Brushless Motor Drone Kit with Camera The E99 Pro Foldable Drone with a Camera and Brushless Motor offers a seamless flying experience with its advanced features. Capture stunning HD footage from the sky and enjoy long battery life for extended flights. Control the drone effortlessly via the app and perform impressive for dynamic shots. Its foldable design makes it portable, while the air pressure-fixed high feature ensures stable flight at a consistent altitude. Perfect for both beginners and seasoned drone enthusiasts! Shop the E88 Pro Dual Camera Drone at Best Price! Also check out the best collection of DIY Drone Kits . Features HD Camera: Capture stunning, high-definition footage. Long Battery Life: Enjoy extended use for longer flights. APP Control: Convenient control via a smartphone app. Folding Body: Compact design for easy storage and portability. Air Pressure Fixed High: Maintain stable altitude with air pressure control.

EMAX D-SHOT Bullet 6A ESC for Onshot42 2S FPV Racing Drone The EMAX D-SHOT Bullet 6A ESC is a high-performance drone speed controller engineered for Onshot42 2S FPV racing drones. Designed with precision, this compact ESC controller delivers reliable performance with a 6A continuous current capacity and advanced DShot protocol support for ultra-smooth throttle control. Featuring BLHeli-S firmware, it includes active braking, damped light output, and programmable motor timing—ensuring fast response, enhanced flight stability, and improved efficiency. Perfect for drone enthusiasts seeking a lightweight yet powerful electronic speed controller for drone builds. Features: The market's lightest and smallest ESC, built particularly for high-level FPV racing. Using the most recent BLHeli-S firmware (16.5), hardware PWM provides a signal that improves smooth throttle response and reduces noise. Supports the new digital signal DSHOT as well as the analog signals MULTISHOT, ONESHOT42, and ONESHOT125. High-quality MOSFET and ceramic capacitors. The 3oz high TG PCB board dramatically improves heat dissipation and system efficiency. The new aluminum heat sink provides protection from propeller impact damage.

EMAX ECO 1106 4500KV CW Micro Brushless Motor for FPV Racing RC Drone The EMAX ECO 1106 4500KV CW Micro Brushless Motor redefines performance for 2-inch FPV racing drones. Designed for enthusiasts who demand speed and precision, this micro brushless motor offers incredible power output in a compact form factor. With an 8mm tall stator, it delivers immediate torque response, ensuring exceptional control during fast maneuvers. Compatible with 2S–3S LiPo batteries, the motor provides the perfect balance of efficiency and thrust for micro drone builds. Each brushless motor is crafted from high-quality CNC-machined materials and fitted with premium ball bearings, ensuring smooth, vibration-free performance that enhances flight stability and overall flight controller precision. Ideal for racers and hobbyists, this brushless motor for drone applications combines durability, responsiveness, and high-speed capability in one powerful package. Features: Precision durable ball bearings Steel shaft for high strength. Anodizing to improve finish and corrosion resistance 99 millimeter hole pattern Multi-strand copper winding 100mm silicone wire, 26AWG.

Emax ECO II 2004 2000KV Brushless Motor for RC Drones The Emax ECO II 2004 2000KV Brushless Motor is engineered for drone enthusiasts seeking a perfect balance of power, efficiency, and durability. As part of the renowned ECO II Series, this brushless motor for drone applications is completely redesigned with a sleek, rounded structure and reinforced build to withstand demanding FPV flights. Its precision-engineered design ensures smooth and responsive performance, while the modern reflective finish adds both style and sophistication. Ideal for FPV drone motors, the ECO II 2000KV delivers consistent thrust, superior control, and long-lasting reliability — all at an affordable price point, making it a top choice for both hobbyists and professionals. Features: Rounded bell design, reinforced attachment points for durability. Mirror-polished surface provides a sleek, reflective appearance. Upgraded N52SH curved arc magnets for better performance. Precision NSK bearings ensure smooth and reliable operation. Standard 12x12mm motor mounting for simple installation.

EMAX ECO II 2004 2400KV Brushless Motor for FPV Racing Drones The EMAX ECO II 2004 2400KV Brushless Motor is a powerful and efficient brushless motor for drones, engineered specifically for 3–4 inch FPV racing and freestyle builds. Upgraded from the original ECO series, it delivers superior performance with smoother throttle control, enhanced torque, and improved power efficiency. Thanks to its N52SH arc magnets, pilots can experience stronger propulsion and faster acceleration during demanding flight maneuvers. The motor’s rounded, reinforced housing provides exceptional durability while keeping the design lightweight — making it an ideal drone motor for both speed and precision flying. Features: Precision bearing ensures smooth operation. Durable Steel Shaft Anodized Aluminum Finish for Strength & Style Mounting Hole Pattern: 19 x 19mm. Multi-strand winding for effective power delivery

EMAX ECO II 2004 3000KV Brushless Motor for Mini FPV Drones with High RPM The EMAX ECO II 2004 3000KV Brushless Motor is a high-performance, high speed brushless motor built specifically for mini FPV drones and racing quads. Featuring a redesigned, reinforced structure with a rounded architecture and sleek mirror-polished finish, it ensures exceptional durability and performance under demanding conditions. With powerful N52SH arc magnets, the motor delivers superior torque, faster RPMs, and highly responsive throttle control, making it perfect for freestyle, cinematic, or racing drone applications. Combining cutting-edge design, reliability, and affordability, this brushless motor for drone enthusiasts stands out as the next evolution in compact brushless motor technology. Features: NSK precision bearings for smooth, dependable rotation Base casing constructed of robust aluminum 7075. Rotor with improved N52SH arc magnets for high performance. Strong steel shaft for stability and longevity. Standard 12×12 mm motor mounting hole pattern. Multi-strand winding for effective power delivery. 120 mm 24 AWG silicone wire for flexible and dependable connections.

Emax ECO II 2807 1300KV 3–6S High Performance Brushless Motor for RC Drones The Emax ECO II 2807 1300KV Brushless Motor is a powerhouse engineered for FPV racing, freestyle, and long-range drone enthusiasts seeking the perfect blend of performance and reliability. This brushless motor for drone applications is designed with a reinforced rounded structure to boost strength and impact resistance while maintaining a sleek, modern look. Featuring upgraded N52SH arc magnets, it delivers faster throttle response, higher RPMs, and exceptional torque, ensuring smooth and efficient operation. Compatible with 3–6S LiPo batteries, this high speed brushless motor provides consistent, powerful output, making it a top-tier choice for drone builders and pilots who demand precision and durability in every flight. Features: Brushless motor with a high performance rating of 2807 1300KV. Optimized for 3-6S LiPo battery configurations. Upgraded N52SH arc magnets provide improved throttle responsiveness. A reinforced rounded shape ensures maximum durability. Sleek reflecting finish for a modern, premium appearance. Provides increased torque, thrust, and RPMs. Suitable for FPV racing, freestyle, and long-range drones. Lightweight, efficient, and cost-effective construction.