SimpliFly ESC 30A (2S–6S) for BLDC Motors with D-Shot OneShot125 The SimpliFly ESC 30A (2S–6S) is a reliable and efficient esc for bldc motor designed to deliver precise speed control and consistent power output for drone applications. With a 30A current rating and support for 2S to 6S LiPo batteries, it offers the flexibility needed for both beginner and advanced builds. Equipped with modern communication protocols like D-Shot and OneShot125, this ESC ensures fast signal processing and highly responsive throttle control, resulting in smoother and more stable flight performance. Built using authentic, high-quality components, it provides excellent durability and optimized linearity, making it suitable for multirotors, fixed-wing aircraft, and helicopters. Additionally, features such as programmable motor direction, configurable throttle range, and built-in protections like low-voltage cut-off and overheat protection make it a dependable choice for safe and efficient drone operation. Features: The ESC has a constant current of 30A and is brushless. Burst current: 40 amps. Battery: 2-6S Lipo. Support: Oneshot125, DShot up to 1200. Application: Multi-rotor, RC plane, etc. Firmware: Based on BLheli 32.

Single Cell Lithium Battery Boost Power Module Board The single cell power board Support FCP voltage and current output protocol. Support Qualcomm QC2.0/3.0 classA 5V, 9V, 12V voltage output. It automatically recognize FCP and QC2.0/3.0 fast charge protocol. The single cell lithium battery power module is a high power density, fully integrated boost converter with an 11m? power switch and a 13m? rectifier switch that provides an efficient, small form factor solution for portable systems. With a wide input voltage range of 2.7V to 12V, the TPS61088 supports applications with single or two-cell Li-Ion batteries. Application of the Power Modue Board: This module can be applied to a single-cell lithium battery to 5V-12V output for general digital product charging, such as mobile phones, Ipad, MP3, PSP and so on. It can be used as a high current output mobile power source only by connecting the battery. It is also possible to supply power to the 5-12V product by setting the output voltage.

Single Channel 12V Relay Module 30A This 1 Channel 12V Relay Module is capable of actuating 240VAC/30A circuits safely. Eliminating the dangers of high current circuits for users. read our blog explaining applications of relays , which provides detailed information about relays, including their definition, working principle, construction, contact types, various types of relays, and their applications. Packaging Includes: 1 x 1 Channel 12V Relay Module

Single Shaft 300RPM BO Motor with Wheels (2pcs) This is the Single Shaft 300RPM BO Motor with Wheels (2pcs), The BO motor gives good torque and rpm at lower operating voltages, It is the biggest advantage of these single shaft BO motors . The 300 rpm BO motor is the low-cost geared DC Motor. It is an alternative to our metal gear DC motors. The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon-reinforced plastic rim. The BO motor with wheels is easy to install and ideally suited for use in a mobile robot car. If you want to make a mobile robot car, for that you will need few essential components like Arduino , batteries , switches , wires and soldering tools Features: Easy to install Ideal for DIY projects Mechanical structure is simple High strength Good toughness. Applications: Smart Robot Cars: Ideal for building mobile robots and smart cars. Obstacle Avoider Robots: Use in robots designed to navigate around obstacles. DIY Trains: Perfect for creating small, motorized train models. 2WD Robots: Suitable for two-wheel drive robotic projects. Educational Kits: Great for teaching robotics and electronics in educational settings. Prototyping: Useful for prototyping various mechanical and robotic systems. Hobby Projects: Ideal for hobbyists working on custom robotic or mechanical projects

Single Shaft L-Shaped 60 RPM BO Motor (1Pc) This Single Shaft L-Shaped 60 RPM BO Motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. This BO motor is a Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This BO motor is less cost, small, easy to install, and can be used in mobile robot car. If you want to use this single shaft L shaped BO motor in your DIY projects, for that you will need few essential components like batteries , switches , wires , soldering tools and wheels . Applications: Smart Robot Cars DIY Train Obstacle Avoider robot 2wd Robot

Single Shaft L-Shaped 60 RPM BO Motor with 65X25mm Wheel - 2 Sets These are Single Shaft L-Shaped 60 RPM BO Motor with 65X25mm Wheel - 2 Sets. The BO Motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. This BO motor is a Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. The wheels are made up of high-quality rubber which gives maximum traction while operating. The wheels are strong and sturdy as they features a nylon-reinforced plastic rim. The motors are ideal for DIY enthusiasts. These BO motors are less cost, small, easy to install, and can be used in mobile robot car. If you want to use these Single Shaft L-Shaped 60 RPM BO Motor with Wheels in your DIY projects, for that you will need few essential components like batteries , switches , wires and soldering tools . Applications: Smart Robot Cars DIY Train Obstacle Avoider robot 2wd Robot

Single Shaft L-Shaped 60 RPM BO Motor with 65X25mm Wheel - 4 Sets These are Single Shaft L-Shaped 60 RPM BO Motor with 65X25mm Wheel - 4 Sets. The BO Motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. This BO motor is a Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. The wheels are made up of high-quality rubber which gives maximum traction while operating. The wheels are strong and sturdy as they features a nylon-reinforced plastic rim. The motor has the ability to operate with minimum or no lubrication, due to inherent lubricity. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD and 4WD platforms. If you want to use these Single Shaft L-Shaped 60 RPM BO Motor with Wheels in your DIY projects, for that you will need few essential components like batteries , switches , wires and soldering tools . Applications: Line follower robot Obstacle Avoider Robot Self-Balancing Robot Firefighting Robot

Single Shaft L-Shaped 60 RPM BO Motor with Wheel - (4 sets) These are Single Shaft L-Shaped 60 RPM BO Motor with Wheel - 4 Sets. The BO Motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. This BO motor is a Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. The wheels are made up of high-quality rubber which gives maximum traction while operating. The wheels are strong , sturdy and can be coupled with BO motors using a small screw ( screw is not included). The motors are ideal for DIY enthusiasts. These BO motors are less cost, small, easy to install, and can be used in mobile robot car. If you want to use these Single Shaft L-Shaped 60 RPM BO Motors with Wheels in your DIY projects, for that you will need few essential components like batteries , switches , wires and soldering tools . Applications: Smart Robot Cars DIY Train Obstacle Avoider robot 2wd Robot

Single Shaft L-Shaped 60 RPM BO Motor with Wheel (2 sets) These are Single Shaft L-Shaped 60 RPM BO Motor with Wheel - 2 Sets. The BO Motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. This BO motor is a Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. The wheels are made up of high-quality rubber which gives maximum traction while operating. The wheels are strong , sturdy and can be coupled with BO motors using a small screw ( screw is not included). The motors are ideal for DIY enthusiasts. These BO motors are less cost, small, easy to install, and can be used in mobile robot car. If you want to use these Single Shaft L-Shaped 60 RPM BO Motor with Wheels in your DIY projects, for that you will need few essential components like batteries , switches , wires and soldering tools . Applications: Smart Robot Cars DIY Train Obstacle Avoider robot 2wd Robot

Single Start 8mm Copper Nut The Single Start 8mm Copper Nut is a precision-machined brass motion component designed to deliver smooth, accurate, and reliable linear movement in 3D printers, CNC machines, and custom automation setups. Built with an 8mm internal thread and a single-start design, it ensures consistent travel per rotation when paired with an 8mm lead screw. The durable copper alloy body offers excellent wear resistance, low friction, and long operational life, making it ideal for high-precision motion control systems. Whether you’re upgrading a 3D printer, building a CNC platform, or working on robotics and mechanical automation, this single-start copper nut provides the stability and performance you need. Its corrosion-resistant construction, easy installation, and compatibility with stepper-driven linear assemblies make it a dependable choice for makers, engineers, and DIY builders. Features: Made from high-quality copper alloy for superior strength, smooth operation, and long-term durability. Single-start 8mm threaded design ensures controlled, precise, and consistent linear movement. Perfectly compatible with 8mm lead screws used in 3D printers, CNC routers, robotics, and linear motion systems. Low-friction material enables quieter operation and reduces wear over time. Corrosion-resistant construction maintains accuracy even under continuous load. Easy to install and ideal for stepper motor–driven guide rails and compact motion assemblies.