150 RPM Single Shaft BO Motor This is the 150 rpm straight single shaft BO motor, which gives good torque and rpm at lower operating voltages, It is the biggest advantage of these BO motors . Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This BO motor is the low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. This BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. If you want to use this 15 0 rpm straight single shaft BO motor in your projects , for that you will need few essential components like batteries , switches , wires , soldering tools and wheels . Features: Cost-effectiveness of the injection-molding process. Elimination of machining operations. Low density: lightweight, low inertia. Uniformity of parts. Capability to absorb shock and vibration as a result of elastic compliance. Ability to operate with minimum or no lubrication, due to inherent lubricity. The relatively low coefficient of friction. Corrosion-resistance; elimination of plating, or protective coatings. The quietness of operation. Tolerances often less critical than for metal gears, due in part to their greater resilience.

1500V USB To USB Isolator Module ADUM4160 & 3160 - Optical Isolation Board for USB Protection The USB to USB Isolator Module is designed to protect your devices and computer from electrical noise, ground loops, and voltage spikes. Featuring optical isolation technology, this module ensures safe communication between USB interfaces by isolating the data and power lines. It supports both low-speed (1.5 Mbps) and full-speed (12 Mbps) USB communication, making it suitable for a variety of microcontroller programmers, USB test instruments, HID devices, and data-acquisition tools. With an isolation voltage of up to 3000V and a built-in 1500V isolated power module, this board offers robust electrical protection in demanding environments. It is plug-and-play, powered directly from the host USB port, and requires no additional drivers. Ideal for labs, embedded systems, industrial environments, and DIY electronics, the ADUM3160 isolator helps ensure stable signal integrity and protects both the host system and connected equipment. Features: Provides strong electrical isolation using ADUM3160/ADUM4160 to protect USB devices from noise, surges, and ground loops. Supports USB 1.5 Mbps low-speed and 12 Mbps full-speed communication for wide compatibility. Built-in 1500V isolated power module and 3000V data isolation capability for enhanced safety. Compatible with many programmers and USB devices such as FT232, CH341, J-Link, PICKIT2, card readers, cameras, and more. Plug-and-play design powered directly from the host USB port—no external drivers required. Designed to operate in a wide temperature range from -40°C to 85°C, suitable for lab and industrial use. Compact PCB for easy integration into workbenches, test setups, and embedded development systems.

1501MG Metal Steering Gear Power HD's 1501MG metal-geared analogue servo delivers extra-high torque normally associated with much more expensive or larger servos. Servo horns and the necessary hardware are included. The 1501MG is a powerful standard-size servo with metal gears and two ball bearings that can deliver a surprising amount of torque for such a small servo. The 1501MG servo motor operates on standard RC servo pulses, with a running angle of approximately 165° over a servo pulse range of 800 s to 2200 s, and a 10?? (25 cm) cable terminated with a standard JR-style connector that is Futaba-compatible. read our blog explaining the comparison of servo motor vs dc motor .

150mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut The Trapezoidal Screw Rod is a 150 mm screw rod and has a rod diameter of 8mm and thread screw pitch as 2mm. The 15 0 mm screw rod also comes with a copper nut. The copper nut is equipped with 4 holes for fixing the machine thread. They have great applications in 3D printing and are also used in stepper motor, machine tool rails and other machinery equipment. It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw which is mainly used in stepper motor, machine tool rails and other types of equipment. check out : 200mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut Applications: Can be used in 3D Printers CNC Machines Stepping motor driving guide rail Engraving machine

150W Dc-Dc Boost Adjustable Power Converter This DC-DC boost power supply/converter module is incredibly versatile, capable of stepping up any input voltage from 10V to 32V to an output voltage ranging from 12V to 35V. It can produce up to 150W of output power and a current of 6A. This Dc-Dc Boost Converter is heavy-duty, evidenced by the large toroidal inductor and dual heatsinks. This module is especially useful for 12V automotive applications. It can boost standard 12V battery power to 19V for use as a laptop power supply or to 18V or 24V for other applications requiring higher voltages. It is important to note that this module does not have reverse polarity protection. It is recommended to use a series diode, but for high loads, this may not be an option. Careful attention to the input polarity is crucial to avoid damaging the module. Applications DIY adjustable output vehicle power supply. Provide 12V input, the output voltage can be continuously adjusted from 14V to 35V (output voltage cannot be lower than the input voltage). Universal car laptop power supply. Provide 12V input, the output voltage is adjustable to your notebook to work. Can easily drive dual-core or quad-core notebooks at 19V and up to 6A output current. Boost Charger, to convert your car’s 12V power to greater than 12V, such as 18V or 24V Power supply for your electronic devices, as long as the voltage is adjusted to the voltage and does not exceed the module’s rated current. Features The non-isolated step-up power conversion module Onboard LED illuminates when the voltage is applied to the module Equips Multi-turn Potentiometer. Easy to drive 65W 90W dual-core notebook. The output voltage is continuously adjustable on OUT+ and OUT- screw terminals (Output voltage must be greater than input voltage)

15A 400W Mosfet Trigger Switch Driver This Dual Large Power Mosfet is the ultimate solution for high-power applications. This compact device manages 15A, 400W power at room temperature with its dual MOSFET parallel active output. With a wide voltage input supporting PWM and a flexible trigger source, this Mosfet adapts to various setups, connecting seamlessly to microcontrollers, PLC interfaces, and DC power sources. The robust output capacity of DC 5V - 36V, continuous current 15A, and power up to 400W makes it versatile for applications like high-power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, and solenoid valves. Its temperature resilience (-40 to 85?) ensures reliable performance in diverse conditions. Compact in size at 34mm X 17mm X 12mm, it's designed for efficiency, but for high-current operations. Features: The trigger source: digital high-low (DC3.3V – 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0–20KHZ perfect support. Output capacity: DC 5V – 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A. Applications: High-power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, motor speed control, lamp brightness

15cm Camera Cable for Raspberry Pi The camera cable is compatible with NoIR camera for Raspberry Pi. The 15cm Camera Cable can be used for Raspberry Pi 3 and Raspberry Pi 2. Ribbon Cable with FFC contacts (Opposite-sided).

15cm Multipurpose PCB Measuring Ruler The 15cm Multipurpose PCB Ruler is a precision-engineered measuring tool designed specifically for electronics enthusiasts, PCB designers, and makers. Built from durable PCB material with copper etching and gold plating, this ruler provides excellent longevity and a premium feel. It offers dual-scale measurements in both millimeters and inches, allowing smooth workflow across different project requirements. More than just a ruler, it includes valuable PCB reference data such as IC package outlines, angle gauges, SMD component dimensions, pin spacing charts, AWG hole sizes, and polarity indicators. This compact tool fits easily into any toolkit and serves as a quick-access reference guide during PCB design, inspection, or debugging sessions. Whether you're designing circuits or checking component footprints, this multipurpose ruler makes your work more efficient and accurate. Features: 15cm (6-inch) dual-scale ruler with precise mm and inch markings. Made from high-quality, gold-plated PCB material for long durability. Includes common IC package guides such as SOP-32, SOP-24, SOP-20, SOP18, SOP16, and SOP14. Provides SMD package dimensions for capacitors, resistors, and other components. Compact, lightweight, and easy to carry in any electronics toolkit. Ideal multipurpose measuring tool for PCB design, prototyping, and debugging.

15cm Pre-Crimped Cables 6 Colors with SH1.0 Connectors The 15cm Pre-Crimped Cables with SH1.0 Connectors are ideal for use with flight controllers such as SPRacingF3, OMNIBUS F4 Pro, F7, and more, making them a must-have for RC and drone hobbyists. These cables allow for easy and customizable connections between the flight controller and various peripherals including cameras, VTX, GPS, telemetry modules, Bluetooth modules, OSD units, and ultrasonic sensors. With ultra-soft silicone wires, these cables maintain excellent flexibility—even in low-temperature environments. Their pre-crimped design allows users to effortlessly create custom cables by simply inserting the terminals into compatible connectors. Features: Wide Compatibility – Designed for popular flight controllers like SPRacingF3, OMNIBUS F4 Pro, and F7, ideal for racing drones and RC builds. Custom Cable Creation – Pre-crimped terminals allow quick and easy DIY cable assembly without soldering. Multi-Module Connectivity – Supports seamless integration with cameras, GPS, VTX, telemetry, Bluetooth, OSD, and ultrasonic sensors. Flexible Silicone Wires – Made with ultra-soft silicone for enhanced flexibility, even in low-temperature environments. RC Hobbyist Essential – A practical and reliable wiring solution for building and upgrading drone systems.

15cm x 10cm Single Side Copper Clad Laminate PCB Board Ideal for building a prototype of electronic circuit, double sided copper PCB. Mechanically assisted and electrically connects electronic components with conductive rails, pads and other features etched from copper plates on a non-conductive substrate. This product is widely used in product development, DIY experiments, maintenance, production, etc.