Cytron SmartDriveDuo-60A 7V-45V DC Motor Driver The Cytron SmartDriveDuo-60A 7V-45V DC Motor Driver is a high-performance dual-channel motor controller capable of delivering 60A continuous current per channel, making it ideal for powering high-torque motors in combat robots, sumo bots, and advanced robotics projects. Designed with versatility in mind, this Cytron 60A motor driver accepts a wide input voltage range from 7V to 45V and supports multiple control interfaces including RC (radio control), PWM, analog voltage, and UART serial commands - perfect for seamless integration with microcontrollers like Arduino and PIC. Drawing from the success of previous Cytron motor drivers such as MD10C and MDDS10, the SmartDrive motor controller 60A includes a host of smart features. It is equipped with a built-in brushless fan for efficient cooling, high-frequency 16kHz MOSFET switching for silent operation, and onboard temperature sensors with stage-by-stage current limiting to prevent overheating. The controller also features easy RC receiver integration using a 2×3 header pin, plus a battery low-voltage warning system for safe operation. Whether you’re upgrading your robot's power system or building from scratch, the Cytron dual channel motor controller ensures robust, smart, and reliable motor control. Features: It is a DC brush motor driver, not for brushless motors. A single power action simply connects power to the battery input. Dual Channels: It may run two brush motors independently or simultaneously. Operating modes include RC (RC servo signal), Analog, PWM, and simplified/packetized UART. PWM mode now supports signed magnitude and locked anti-phase. The top cover includes two DC brushless fans to cool the driver. There are two manual/test buttons for each channel. There are two output indicator LEDs for each channel. Power, error indicator, run status (left and right) LEDs The on-board reset button is used to restart the MCU after changing operation mode. Temperature feedback to regulate current and prevent MOSFET overheating. At room temperature, it can support up to 60A of continuous current. Supports up to 100A peak for one second. As the temperature rises, the current will become limited. Suitable for fighting or sumo robots. The switching frequency is 16KHz, allowing for quiet operation. An onboard switching voltage regulator improves power efficiency. Battery low voltage monitoring mode. We tested this driver with a single power window motor at 24V, full load, and no smoke came out.

Cytron UNO – Arduino UNO Compatible Board with USB Micro-B The Cytron UNO is a fully Arduino UNO compatible development board built with the reliable ATmega328P microcontroller, making it ideal for beginners, students, hobbyists, and electronics enthusiasts. Designed to offer the same functionality as the Arduino UNO R3, the Cytron UNO includes 14 digital I/O pins, 6 PWM outputs, 6 analog inputs, UART, SPI, I2C, and full R3 shield compatibility. With USB Micro-B connectivity, you can easily program the board using the same cable used for Android phones and power banks - making it more convenient and cost-friendly for modern makers. Cytron further enhances the board with a stronger onboard voltage regulator, improved power handling, and repositioned LEDs on the edge for better visibility, even when a shield is attached. The CT-UNO also includes extra standard pads for custom shields, an FTDI-based USB interface for stable programming, and robust DC input support from 7V to 15V. Whether you’re building IoT prototypes, robotics, embedded systems, or learning coding fundamentals, the Cytron UNO delivers reliability, ease of use, and full compatibility with the entire Arduino ecosystem. Features Powered by SMD ATmega328P with Optiboot (UNO R3) bootloader for fast programming. USB programming enabled by stable FTDI FT231X chip for improved reliability. Supports DC 7–15V input with upgraded onboard voltage regulator for higher output current. Offers 14 digital I/O pins, including 6 PWM outputs, and 6 analog inputs for versatile projects. Fully Arduino UNO R3 shield compatible with ISP header and broken-out SDA, SCL, IOREF pins. Uses USB Micro-B socket, compatible with standard Android phone cables. LEDs relocated to board edge for clear visibility during development. Includes additional 2.54mm pads for creating custom shields. White PCB design with clean layout and Cytron build quality. Dimensions

Cytron UNO Special Edition – Arduino-Compatible Board with Side Connectors The Cytron UNO Special Edition (CT-UNO-SE) is a fully Arduino-compatible development board designed for makers, students, and hobbyists who need reliable performance for DIY electronics and robotics projects. Built around the ATmega328P microcontroller, this board offers the familiar Arduino UNO experience while adding enhanced stability with the FTDI FT231X USB-to-Serial chip, ensuring smoother programming and communication. Whether you're prototyping sensors, robotics circuits, or automation systems, this board delivers a dependable and beginner-friendly platform for all your microcontroller learning needs. What makes the CT-UNO-SE stand out is its unique side connectors, allowing it to be stacked on top of or beneath Arduino shields, giving you maximum flexibility while building layered circuits or compact embedded systems. With full Arduino UNO R3 shield compatibility, 14 digital I/O pins, 6 analog inputs, and both 5V and 3.3V regulated outputs, this special edition board combines convenience, versatility, and long-term durability - all wrapped into a sleek white PCB that makes your projects look clean and professional. Features Built with the ATmega328P microcontroller paired with the Optiboot bootloader for faster program uploads. Equipped with the FTDI FT231X USB interface, offering stable and reliable serial communication. Supports a wide DC input range of 7–15V, suitable for most maker power setups. Includes a 1A 5V regulator and 500mA 3.3V regulator for powering sensors and modules. Offers 14 digital I/O pins (6 PWM) and 6 analog inputs for versatile interfacing. Fully R3 shield compatible with special side connectors for flexible stacking. Features 32KB Flash memory, 2KB SRAM, and 1KB EEPROM for program storage. Comes with easily visible TX, RX, power, and pin-13 LEDs placed on the board edge. Utilizes a durable USB Micro-B connector on a clean white PCB. Dimensions

Cytron URC10 Sumo Robot Controller R1.1 Arduino-Compatible Motor Driver Board The Cytron URC10 Sumo Robot Controller R1.1 is a powerful all-in-one robotics control board designed specifically for competitive sumo robot building. It combines an Arduino-compatible ATmega328P microcontroller, a dual 10A motor driver, and dedicated interfaces for ultrasonic, digital, and analog sensors - making it one of the most efficient and beginner-friendly solutions for robot builders. With support for 8V–25V DC motors, 30A peak current, and high-frequency PWM control, this controller ensures strong pushing power and fast maneuverability for 3kg sumo robot competitions. Cytron engineered the URC10 to simplify robot development by integrating essential hardware like built-in test buttons, motor output LEDs, onboard 5V/3.3V regulators, and a Micro-USB interface for programming. Whether you're designing autonomous systems, competitive sumo robots, or experimenting with robotics, the Cytron URC10 offers reliable performance, stable motor control, and easy sensor expansion for both beginners and advanced makers. Features: Designed specifically for up to 3kg sumo robot applications. Built around the Arduino-compatible ATmega328P microcontroller with Optiboot Bootloader. Integrated dual 10A continuous motor driver (30A peak per channel) for high-power brushed DC motors. Supports 8V–25V motor voltage for a wide range of robot motors. Features current limiting at 30A per channel for safe operation under heavy loads. Includes motor test buttons for quick verification without uploading code. Motor output status LEDs for easier debugging and inspection. Compatible with sign-magnitude and locked-antiphase PWM, supporting up to 20kHz frequency. Onboard 5V, 1A regulator and 3.3V, 500mA regulator for powering sensors and modules. Dedicated pins for motors, ultrasonic sensors, digital I/O, and analog sensors. Includes USB Micro-B + CH340 USB-serial system for easy programming upload. Provides 1× I2C port for additional modules. Compact design with dimensions 75.57mm × 99.7mm. Note: Reverse polarity protection is not included.

Cytron ZOOM:BIT Robot Car Kit for micro:bit (without micro:bit) The Cytron ZOOM:BIT Robot Car Kit for micro:bit (without micro:bit) is a powerful yet beginner-friendly DIY robot kit that makes learning robotics and coding fun and engaging. As one of the top robot kits for kids, it allows young learners to start with block-based programming in Microsoft MakeCode and smoothly transition to JavaScript or Python as they grow in confidence. The kit is built on the robust REKA:BIT expansion board and features intelligent components such as auto-calibrating line sensors, servo and DC motor control, and multiple indicator LEDs. Whether you're just beginning your STEM journey or looking to deepen your skills, this robot kit serves as the perfect starter kit for hands-on learning in robotics and movement control. Please note: micro:bit is not included and must be purchased separately. Features: Simple Programming: Compatible with MakeCode Editor; supports block, JavaScript, and Python modes. Line Sensor: Auto-calibration, line detecting LEDs, and a dark/light line selection. Motor Control: There are two DC motor terminals and four servo motor ports for creating movement. LEDs: Two Neopixel RGB LEDs and a line detector LED for visual feedback. Connectivity: Six Grove ports allow for other modules and further growth.

D1(ESP-12E) WiFi Development Board This is ESP8266 D1 R1 V2.1.0 WiFi Development Board. The D1 is an ESP8266 WiFi based board that uses the Arduino layout with an operating voltage of 3.3V. The board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno . It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable . The D1 R1 is a WiFi capable ESP8266EX based development board in the form of the Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU. The D1 R1 also features an onboard switching power supply which allows you to power the board from a power supply up to 12V.

D80SH-12 8025 12V Cooling Fan Power Supply Cabinet The D80SH-12 8025 12V Cooling Fan Power Supply Cabinet powerful exhaust cooling is designed for the power supply or CPU cabinet. It has a two-pin connector to connect in a controller 12V output pin. This DC Fan operates at 12V supply and operates can automatically by the controller system. It is used for multipurpose application. Features: Good airflow Noiseless Performance Easy to install and connect.

DB-9 Male Right Angle Connector Designed to work with the EIA/TIA 232 serial interface standard, which determined the function of all nine pins as a standard, so that multiple companies could design them into their products. DB9 connectors are commonly used for serial peripheral devices like keyboards, mice, joysticks, etc. Also, they are used on DB9 cable assemblies for data connectivity. DB9 is used in many legacy devices that use the DB9 interface for serial communication. The connector module is a male right-angled connector with solder cups. Best suitable for mounting on circuit board. Connecting cables in tight spaces can be a problem in many applications. These low profile right angle D-Sub adapters solve this problem by allowing cables to be connected at a 90-degree angle. Three versions are available for each connector size allowing for cables to exit in opposite directions. Adapters are male to female, fully shielded and are over-molded with gray PVC. Mating hardware is reversible allowing for use in virtually any application. Applications: D-Sub confined space Enclosure applications OEM applications Serial data transmission Data networks Instrument control Device management

DB-9 RS232 to TTL Converter RS-232 to TTL converters make easy connections between your TTL equipment and RS-232 ports. All TTL converter models convert two channels in each direction from TTL to RS-232 or RS-422.

DB9 Female Right Angle Connector PCB Mount Designed to work with the EIA/TIA 232 serial interface standard, which determined the function of all nine pins as a standard, so that multiple companies could design them into their products. DB9 connectors are commonly used for serial peripheral devices like keyboards, mice, joysticks, etc. Also, they are used on DB9 cable assemblies for data connectivity. DB9 is also used in many legacy devices that use the DB9 interface for serial communication. The connector module is a female right angle connector with solder cups. These DB-9 connectors are useful for a wide variety of electronics projects. DB-9 connectors are handy for connection points to projects and are commonly used for serial port connections on electronic and computer equipment. These are solder-cup style connectors. We also offer matching hoods. The hoods come with all the necessary hardware. Note: The color of the plastic insulation material on these connectors may vary from the picture. Possible colors are Black, Blue, and White. If you need a specific color, please call. Technically, the correct term for these connectors is DE9, although DB9 is more commonly used. Applications: Serial data transmission Data networks Instrument control Device management