20K 3296W Trimpot Trimmer Potentiometer (Pack of 5) 20K 3296W Trimpot is a high accuracy variable resistor and PCB mountable with 3 terminal pins. A general-purpose board mountable preset also called by other names like potentiometers, Trimpots, etc but is just a variable resistor. The voltage between the terminal varies as the trimpot is rotated. The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and the center pin outputs a variable voltage between 0v and Vcc as the rotary cermet is rotated. The potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver. This potentiometer has a single turn, which can be used to preset a value. Applications Can be used to adjust the voltage drop in the circuit Measurement and Test of electronic circuits Can be used to control the intensity of led lights in DIY projects

20K 3386P Trimpot Trimmer Potentiometer (Pack of 5) 20K 3386P Trimpot is a high accuracy variable resistor and PCB mountable with 3 terminal pins. A general-purpose board mountable preset also called by other names like potentiometers, Trimpots, etc but is just a variable resistor. The voltage between the terminal varies as the trimpot is rotated. The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and the center pin outputs a variable voltage between 0v and Vcc as the rotary cermet is rotated. The potentiometer is easy to mount on a PCB and can be adjusted using a screwdriver. This potentiometer has a single turn, which can be used to preset a value. Applications Can be used to adjust the voltage drop in the circuit Measurement and Test of electronic circuits Can be used to control the intensity of led lights in DIY projects Also check 20E 3386P Trimpot(Pack of 5) . Some of the important points are that it is a high accuracy variable resistor that can be mounted on a PCB. Also check 20K 3296W Trimpot(Pack of 5) , which is a type of variable resistor. It can be used to adjust voltage in a circuit. The Trimpot is easy to mount on a PCB and can be adjusted with a screwdriver

20K ohm Cermet Preset Potentiometer (Pack of 5) Cermet preset is a compact variable resistor and PCB mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated. The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0v and Vcc as the rotary cermet is rotated. Applications: Can be used as a Voltage divider Can use it to obtain an adjustable output voltage Also check the 50K Cermet(Pack of 5) Cermet Potentiometer. It is a compact variable resistor and PCB mountable with 3 terminal pins. The resistance of each potentiometer is 50K ohms with a tolerance of ±10%. It is designed to be easily mounted on a PCB and adjusted using a screwdriver. Also check 100K Preset Potentiometer - (Pack of 5) . t is designed to be easily mounted on a PCB and adjusted using a screwdriver.

20Kg Load Cell This straight bar load cell (sometimes called a strain gauge) can translate up to 20 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge, you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface. This straight bar load cell is made from an aluminum alloy and is capable of reading a capacity of 1KG of weight It has Four lead wires which can be connected to  HX711 A/D Pressure Sensor.  It is easy to use with driving voltage 5-10V and produce the output voltage as per the force changes over it. Installation of the Sensor is also the simple task, it needs to fix one end through the screw hole and the other end left floating state, according to the label indicates the direction of the gravitational force exerted particular attention must not directly push the white plastic cover part of the sensor in order to avoid damage. An electronic weighing machine uses a load cell to measure the load or pressure produced by the load, here most load cells follow the method of the strain gauge, Which converts the pressure (force) into an electrical signal, these load cells have four strain gauges that are hooked up in a Wheatstone bridge formation. When we apply to load the strain gauge resistance will change and hence the output voltage from the load cell get changes by the way we can measure the load value. read more : Load cell : The Ultimate Guide

20MHz Crystal Oscillator - (Pack of 10) The 20MHz crystal oscillator circuit sustains oscillation by taking a voltage signal from the quartz resonator, amplifying it, and feeding it back to the resonator. It provides clock pulses of 20MHz frequency. The popularity of the crystals is due to the low cost. How are 20MHz crystal oscillators useful? One of the most important traits of the crystal oscillator is that it exhibits very low phase noise. In the crystal oscillator, the crystal mostly vibrates in one axis, therefore only one phase is dominant. This property of low phase noise makes them particularly useful in telecommunications where stable signals are needed, and in scientific equipment where very precise time references are needed. The result is that a quartz crystal behaves like a circuit composed of an inductor, capacitor and resistor, with a precise resonant frequency. Also check 8MHz Crystal Oscillator sold by Iotcart. The oscillator provides clock pulses of 8 MHz frequency and can be used as a UART clock. It allows integer division to common baud rates and is a common clock for AVR microcontrollers.

20mm Adhesive Conductive Copper Tape (30 Meter) This tape is used for shielding pickups and controlling cavities to reduce hum, noise, and radio interference. It features Non-oxidation, anti-static, UV resistance, thermal insulation, and strong adhesion. It is mainly used to eliminate electromagnetic EMI and prevent body harm from electromagnetic waves. Quickly protect your devices from electromagnetic and radio-frequency interference. From buzzing guitars to computer cables. The adhesive is strong, flexible, and highly conductive, making it easy to protect your electronics. Bring some new color and textures into one of your craft projects. Easy to shape and mold with a strong adhesive it sticks to almost any clean surface. With its fantastic pure copper color, this truly versatile tape will bring your imagination to life. check out : 50mm x 33M High Temperature Resistant Tape for 3D Printer Key Features: Flexible Highly Conductive Low Resistance Indoor & Outdoor Use Water-Resistant Strong Conductive Adhesive Applications: EMI & RFI Shielding Circuits Craft Projects Slug & Snail Prevention check out : 48mm x 50 Meter Masking Tape

20mm X 33m Polyimide Adhesive Insulation Tape The 20mm x 33m insulation tape is manufactured with high-quality polyimide material that provides great resistance to high heat temperatures. It serves as the perfect combination of heat resistance (anti-creek property) and Durable Insulation. It has adhesive properties on one side of the insulation tape. check out : 10mm X 33mm Heat Resistant Polyimide High Temperature Adhesive Insulation Tape

220 Ohm Resistor - (Pack of 10) A 220-ohm resistor is an electronic component that is used to resist the flow of electricity in a circuit. Resistors are used in a wide variety of electronic circuits to control the flow of current and protect other components from damage. 220-ohm resistors are a commonly used resistance value in electronic circuits. They are typically small, cylindrical components with colored bands on them that indicate their resistance value. The color bands on a 220-ohm resistor typically include red, red, brown, and gold. Resistor Colour Code:

220K ohm 16mm Rotary Pot Variable Potentiometer Potentiometers are very useful in changing the electrical parameters of a system. It is a single turn 220K Potentiometer with a rotating knob. These potentiometers are also commonly called as a rotary potentiometer or just POT in short.  A potentiometer knob can also be used along with this POT for aesthetic purposes. This is a carbon track, single turn, adjustable resistances, of value 220KOhm Knob potentiometer. It is meant for mounting on panel and is supplied complete with a knob. The knob is affixed on the plastic spindle of the potentiometer and turns the spindle which changes the resistance. The variation of resistance is linearly proportion to the degree of rotation. Potentiometer, in electronic parlance, is a manually variable resistance. Because its most common consumer application is for controlling volume/tone of sound in broadcast receivers, it is loosely referred to as "volume" or ''tone''. It is not a meter with scale and needle. Potentiometers look different depending on size, power handled, application, value and type of material used. There is, however, a common feature-there is wiper which sweeps over a length of resistive material. The two ends of the resistive material as also the wiper are available to the user as electrical terminations. The user gets a variable resistance between the wiper and the two ends. Also check pack of 5 16mm rotary potentiometers with a resistance of 1M ohms . These potentiometers have a tolerance of 20% and are used for adjusting various parameters like voltage and current in electronic circuits. The package includes 5 potentiometers, and each has a total rotational angle of 300° ± 5°.

220k Resistor (Pack of 10) The carbon film resistor is a 22k ohm resistor with 5% tolerance. It is a type of fixed resistor that uses carbon film to restrict the electric current to certain level. These types of resistors are widely used in the electronic circuits.  Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This allows them to stand well with repeated inserts into the solderless panels.