60 RPM- STRAIGHT SINGLE SHAFT This is the 60 rpm straight single shaft BO motor, which gives good torque and rpm at lower operating voltages, It is the biggest advantage of these BO motors. Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This BO motor is the low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. This BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. If you want to use this 60 rpm straight single shaft BO motor in your projects , for that you will need few essential components like batteries , switches , wires , soldering tools and wheels.

60kgcm Metal Gear Servo Motor Ultra Torque Quarter Scale The Ultra Torque Quarter Scale 60kgcm Metal Gear Servo Motor is a great choice for your projects! This strong and waterproof SSG metal geared servo motor gives you excellent performance, with 58kg/cm at 6V and 65kg/cm at 7.4V. It works well for many things, like airplanes, helicopters, BAJA cars, RC cars, and other RC models. Features Durable all metal gear Programmable digital amplifier with soft drive Stable dual ball bearing design Bottom side axial mount hole Compatible with Futaba, JR, and Hitec systems Original factory product Low noise operation Operating angle: 180 degrees Maximum orientation angle: 180 or 270 degrees Package Includes: 1 x 60kgcm Metal Gear Servo Motor 1 x Accessories Set Specifications: Specification Details Item Type Generic Servo Motor Torque Rating (kg-cm) 58 to 70 Operating Voltage (VDC) 6 ~ 8.4 Operating Speed @6V 0.17 sec/60 degrees Operating Speed @7.4V 0.15 sec/60 degrees Operating Speed @8.4V 0.13 sec/60 degrees Stall Torque @6V (Kg-Cm) 58 kg.cm Stall Torque @7.4V (Kg-Cm) 65 kg.cm Stall Torque @8.4V (Kg-Cm) 70 kg.cm Operating Temperature (°C) -15ºC to 70ºC Storage Temperature (°C) -30ºC to 80ºC Cable Length (cm) 32 cm Dead Zone Setting 3 µs Gear Type Metal Required Pulse 500 µs - 2500 µs Length (mm) 65 mm Width (mm) 30 mm Height (mm) 48 mm Weight (g) 160 g

65mm Rubber Wheel for BO Motors  This is the 65mm Rubber Wheel for BO Motor, The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon-reinforced plastic rim. These BO wheels are commonly used components in Robotics. With an approximate diameter of 65mm and 26mm thickness, This Wheel is suitable for all BO motors. Can be used in our Robot vehicles with the standard motor/gearbox fitting. check out : 125mm Wheel black-blue with 4mm coupling

6V 5000RPM Peristaltic Dosing Pump This is 6V DC Dosing Pump Peristaltic Dosing Head For Aquarium Lab Analytical Water. The flow direction of the peristaltic pump depends on the connection mode of the positive and negative electrodes. Beautiful appearance, compact structure, small installation space, and low energy consumption. The Snap design can be removed very easily to replace and clean up the pump tube, but also avoid the pressure hose pump headpiece walking and many other issues. It is very easy to take apart and clean, so there is a gap between the motor and the pump. Just pull out and push in is ok. Silent work~ Suitable for aquarium, chemicals, liquids, and dosing additives.  The compact design not only has the convenience of press type but also avoids many problems such as the movement of the press type pump head hose. You can control the flow direction through positive and negative connections. Each channel provides 1 to 9999 ml per day for a life of 6000 hours. This pump is widely used, for family watering, experiment liquid dispensing, chemical liquid transport, etc. Application: Medical usage: for liquid transfer, sampling, dispensing Chemical engineering usage: sample analysis, dispensing liquid Ink printer: for transferring ink, cleaning pipeline Laboratory use: liquid dispensing, extract liquid, Beverage: dispensing, filling Environmental usage: transferring and sampling sewage Factory usage: for liquid dispensing Home usage: watering flowers, garden irrigation Package Includes: 1 x 5000RPM 6V Dosing Pump Specifications: RPM 5000 Voltage 6 Material Metal Diameter (mm)  27.6 Height (mm) 37.9

6V Mini Dosing pump This 6V Mini Dosing pump is small size dosing pump for water, chemicals, liquids, and disinfectants. The peristaltic pump has a silicone tube through which the fluid is pumped, which does not come into contact with the pump components, making it completely sealed and safe. It is used in aquariums, medical equipment, or for pumping aggressive fluids. It is also used for the distribution of chemicals, fertilizers, detergents, and disinfectants. This pump requires a 6 V DC supply and can produce a flow rate of up to 10.5 ml per minute. If speed control is required we suggest using a simple PWM signal.

6V N20 600 RPM Miniature Gear Motor This N20-6V-600 Rpm Micro Metal Gear Motor has small volume, torsion big, all-metal gear, durable, not easy to wear. Great replacement for the rusty or damaged DC geared speed reduce motor on the machine. Widely used on Boat, Car, Electric Bicycle, Fan, Home Appliance. The N20 Micro Gear 6V 600 RPM DC Motor (High Torque) is a lightweight, high torque, and low RPM motor. It is equipped with a gearbox assembly so as to increase the torque of the motor. It has a cross-section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. It has a very small size so as fit in complex spaces of small-scale application. One can connect this Micro Gear Motor to wheels to drive them from one place to other while carrying high loads. This DC gear motor (High Torque) has small volume, torsion big, all-metal gear, durable, not easy to wear. Great replacement for the rusty or damaged DC geared speed reduce motor on the machine. Widely used on Boat, Car, Electric Bicycle, Fan, Home Appliance. Package Includes:   1 x 6V N20 600 RPM Miniature Gear Motor Specifications: Model No. N20-6V-600 No Load Current (mA) 0.04 A Stall Current (A) 0.67 Rated Torque(kg-cm) 0.14 Stall Torque(Kg-Cm) 0.54 Motor Body Size (Diameter) (mm) 12 Operating Voltage (VDC) 3 ~ 6 Rated Operating Voltage (VDC) 6 No-load Speed (RPM) 600 Rated Speed (RPM) 600 Shaft Type D-typeSingle Side Output Axial Length (mm) 10 Fuselage w/o Shaft Length 26 Screw Size M3 Shaft Diameter 3 mm Weight 12 gm

7 X 2 Cm Gear Motor Robot Wheel, Tyres for 6 mm Shaft Geared Dc Motor - 4 Pieces Robotics Science Project These are the 7 x 2 cm gear motor robot wheels (4 pcs), These wheels can be used with the motors having 6mm shaft, The diameter of the wheel is 70 mm and the width is 20 mm including the rubber grip as well. These wheels are great for makers, hobby engineers, and anyone who wants to build small car projects. Suitable for running on the ground, good wear resistance, perfect replacement for your kit. These wheels are High-quality PCB FR4 Grade with FPT Certified, easy to mount, durable and cheap. With 6mm hole for the shaft and the screw for fitting making it very easy to mount on motors. check out : 10 X 2 Cm Gear Motor Robot Wheel, Tyres for 6 mm Shaft Geared Dc Motor - 4 Pieces

7 X 4 Cm Gear Motor Robot Wheel, Tyres for 6 mm Shaft Geared Dc Motor - 4 Pieces Robotics Science Project These are 7 x 4 cm gear motor robot wheels ( 4pcs). These wheels can be used as 4x4 with the motors having 6mm shaft, The diameter of the wheel is 70 mm and the width is 40 mm including the rubber grip as well. These wheels are great for makers, hobby engineers, and anyone who wants to build small car projects. Suitable for running on the ground, good wear resistance, perfect replacement for your kit. These wheels are High-quality PCB FR4 Grade with FPT Certified, easy to mount, durable and cheap. With 6mm hole for the shaft and the screw for fitting making it very easy to mount on motors.

70 x 20 mm Robot Wheel and Tyre for 6mm shaft This is the 7 x 2 cm gear motor robot wheel, These wheels can be used with the motors having 6mm shaft, The diameter of the wheel is 70 mm and the width is 20 mm including the rubber grip as well. These wheels are great for makers, hobby engineers, and anyone who wants to build small car projects. Suitable for running on the ground, good wear resistance, perfect replacement for your kit. These wheels are High-quality PCB FR4 Grade with FPT Certified, easy to mount, durable and cheap. With 6mm hole for the shaft and the screw for fitting making it very easy to mount on motors. check out : Mini Wheel (2.5 cm Dia.)

70X40mm Wheel for Gear Motor | Gear Motor Wheel (7x4cm) This is the 7 x 4 cm gear motor robot wheel, These wheels can be used with the motors having 6mm shaft, The diameter of the wheel is 70 mm and the width is 40 mm including the rubber grip as well. These wheels are great for makers, hobby engineers, and anyone who wants to build small car projects. Suitable for running on the ground, good wear resistance, perfect replacement for your kit. These wheels are High-quality PCB FR4 Grade with FPT Certified, easy to mount, durable and cheap. With 6mm hole for the shaft and the screw for fitting making it very easy to mount on motors. check out : 32mm Mini Car N20 Motor Rubber Small Wheel