DFRobot Gravity Analog TDS Water Quality Sensor/Meter for Arduino

SmartElex BS312 PIR Motion Sensor The SmartElex BS312 PIR Motion Sensor is a compact passive infrared sensor designed to detect human motion by sensing changes in infrared radiation. It helps systems respond only when movement is present, reducing unnecessary power usage and improving efficiency. This sensor is suitable for students, makers, engineers, educators, and startups who are building electronics projects that require reliable motion detection in a small, low-power form factor. This PIR motion sensor is ideal for robotics, IoT devices, security systems, and automation projects, especially those that run on batteries or need low standby power consumption. It can be easily interfaced with popular platforms such as Arduino, Raspberry Pi, and ESP32, making integration quick and straightforward. Common use cases include motion-activated lighting, smart alarms, occupancy detection, and compact IoT monitoring solutions where dependable performance and simple integration are essential. Features: Compact PIR sensor for accurate human motion detection Detects movement using passive infrared technology Low power consumption ideal for battery-powered projects Digital output for easy interfacing with microcontrollers Fast response time for real-time motion detection Compatible with Arduino, Raspberry Pi, ESP32, and similar boards

SmartElex 8 Channel Multiplexer Breakout Module – (74HC4051) The SmartElex 8 Channel Multiplexer Breakout Module (74HC4051) is a compact and efficient solution for expanding input and output options in electronic projects. This 74HC4051 multiplexer breakout allows users to route multiple signals through a single microcontroller pin, solving the problem of limited I/O availability when working with sensors, switches, or analog inputs. It is designed for students, makers, engineers, educators, and startups who need a practical way to manage multiple device connections without increasing hardware complexity. This module acts as both an 8 channel multiplexer and demultiplexer, making it suitable for robotics, IoT systems, automation tasks, and rapid prototyping. It integrates smoothly with Arduino, Raspberry Pi, ESP32, and similar platforms, enabling users to scale projects without sacrificing performance or stability. Whether you are building sensor hubs, data acquisition systems, or experimenting with signal routing, this multiplexer demultiplexer module offers a reliable and easy-to-use interface that enhances flexibility in circuit design. Features: Based on the 74HC4051 8-channel analog/digital multiplexer IC Expands I/O by routing up to 8 signals through a single control interface Works as both a multiplexer and demultiplexer for flexible signal routing Helps manage limited microcontroller pins in multi-sensor projects Compatible with Arduino, Raspberry Pi, ESP32, and similar platforms Ideal for robotics, IoT systems, data acquisition, and prototyping

SmartElex 5V 3A 4 Channel Signal Relay Module The SmartElex 5V 3A 4 Channel Signal Relay Module is a compact and reliable 4 Channel Relay Module designed to control four independent medium-power loads with precision. Powered as a 5V relay module, it integrates high-quality JY4100F-S-DC5V-C relays, each capable of switching up to 3A at 120V AC or 24V DC. With dedicated trigger inputs and LED status indicators for every channel, it allows easy monitoring and accurate switching. This module directly interfaces with popular microcontrollers such as Arduino, ESP8266, and Raspberry Pi, making it ideal for IoT, home automation, and embedded control applications where safety, isolation, and consistent performance are essential. Applications: Home automation (controlled lights, fans, and locks) Industrial machine control IoT multi-device projects. Robotics and Motor Control Security systems and alarms. Cautions: Always utilize a properly regulated 5V power supply. Avoid exceeding the rated load capacity. Provide proper isolation for AC loads. Store the module in a dry, clean place. Features: Four-channel relay module allows for independent control of four devices. Operates at 5V DC and has an active LOW/HIGH trigger. Each relay can handle up to 3A at 120V AC or 24V DC. Compatible with Arduino, ESP8266, Raspberry Pi, and more platforms. Each channel has its own set of LED indicators. Fast switching: ≤10 ms operation and ≤5 ms release time. Low contact resistance (≤100 mΩ) ensures effective operation. The total power consumption is around 1.44W over four channels. High insulation resistance and dielectric strength are essential for safety. Wide operational temperature range (-40°C to +85°C).

SmartElex 12V 20A Single Channel Power Relay Module The SmartElex 12V 20A Single Channel Power Relay Module is a high-current switching solution designed to control heavy electrical loads using low-voltage control signals. It helps safely operate high-power devices without directly exposing microcontrollers or control circuits to high current, reducing risk and improving system reliability. This module is suitable for students, makers, engineers, educators, and startups who are working on power control, automation, or embedded electronics projects that demand robust switching capability. This single channel power relay module is ideal for robotics, IoT systems, home and industrial automation, and power management applications where devices such as motors, heaters, pumps, or high-load appliances need reliable control. It can be easily interfaced with popular platforms like Arduino, Raspberry Pi, and ESP32, making it convenient for both prototyping and deployment. The strong build quality and straightforward integration make it a dependable choice for projects requiring consistent and safe high-current switching. Features: Single channel power relay module for high-current load control Operates on 12V, suitable for industrial and automation systems Supports heavy load switching up to 20A Electrical isolation between control and power circuits for safety Compatible with Arduino, Raspberry Pi, ESP32, and similar controllers Robust design for reliable operation in power control applications

7Semi MCP23017 I2C to 16 IO Expander Breakout Board The 7Semi MCP23017 I2C to 16 IO Expander Breakout Board is designed to expand the digital I/O capability of microcontrollers using the trusted MCP23017 I2C IO Expander IC. It provides exactly 16 configurable GPIO pins over a single I2C bus, reducing wiring complexity while maintaining stable performance. Each pin can be independently set as input or output, and the onboard interrupt feature allows the controller to respond instantly to pin state changes. This MCP23017 Breakout Board is compact, easy to integrate, and ideal for applications such as home automation, robotics, industrial control panels, and any project that requires multiple digital inputs and outputs without consuming extra microcontroller pins. Features: 16 I/O Pins: Converts two signal pins into sixteen completely customizable I/O pins. Multi-board Expansion: For larger applications, stack up to 8 boards to provide up to 128 I/O pins. Configure I2C addresses by setting the A0, A1, and A2 jumpers. Dual Connectivity: Includes PH2.0 terminal and solder pad choices for simple connection. Wide Compatibility: Compatible with both 3.3V and 5V systems, ensuring platform versatility. Interrupt Support: The INTA and INTB interrupt pins are used for real-time signal handling. Development Resources: Includes detailed instructions and sample projects for Raspberry Pi, Arduino, STM32, and micro. Easy Integration: The I2C interface, combined with a 4Pin 2.0 mm JST connector, provides for an easy and flexible connection to any MCU.

7Semi DC-DC Buck Converter 5V 3A Out - MP2338 (BO-10182) The 7Semi DC-DC Buck Converter 5V 3A Out – MP2338 (BO-10182) is a compact power module designed to step down higher DC voltages to a stable 5V output with up to 3A current. It provides reliable and efficient power for electronics that require a steady 5V supply, such as microcontrollers, sensors, and development boards. Built around the MP2338 step-down converter, this module offers high efficiency and stable performance while minimizing heat and power loss. It supports a wide input voltage range and includes built-in protection features for safe operation. Whether you’re working on embedded systems, IoT devices, or custom electronics projects, this buck converter makes power management simple and dependable. Features: Boosts power efficiency with a high-performance MP2338 buck converter Provides a stable 5V output at up to 3A for reliable powering Wide input voltage range, compatible with various DC sources Compact breakout module for easy PCB or project integration Built-in protection features for safe and stable operation Ideal for microcontrollers, sensors, IoT boards, and embedded systems

SmartElex BMM150 3 Axis Magnetometer Sensor The SmartElex BMM150 3 Axis Magnetometer Sensor is a compact digital sensor designed to measure magnetic fields along three axes. It helps users accurately detect orientation and heading, making it useful in projects where direction sensing and magnetic field measurement are required. This sensor is suitable for students, makers, engineers, educators, and startups working on embedded systems, learning projects, and prototype development that need reliable magnetic sensing in a small and easy-to-use form. This 3 axis magnetometer sensor is commonly used in robotics, IoT devices, navigation systems, and automation projects that require compass functionality or motion awareness. It can be easily integrated with popular development platforms such as Arduino, Raspberry Pi, and ESP32, allowing smooth data communication and quick setup. The stable performance and simple interfacing make it ideal for applications like robot navigation, electronic compasses, orientation tracking, and smart sensor-based systems Note - The default configuration of module is I2C interface, for SPI interface remove I2C smd jumper & short SPI smd jumper on module. Features: Measures magnetic field strength along three axes (X, Y, and Z) Enables accurate heading and orientation detection Digital output for easy interfacing with microcontrollers Low power operation suitable for battery-powered projects Compact sensor design for space-constrained applications Compatible with Arduino, Raspberry Pi, ESP32, and other development boards

SmartElex Soil Moisture Sensor The SmartElex Soil Moisture Sensor is a simple and efficient sensor module designed to measure the moisture content in soil for gardening, farming, and automation projects. It helps users detect water levels in soil and determine when plants need watering, making it ideal for students, hobbyists, educators, and engineers building smart irrigation or environmental monitoring systems. This soil moisture sensor module offers an easy way to collect data without complex circuit design, providing reliable readings for learning and experimentation. This sensor is commonly used in IoT farming projects, home gardening automation, greenhouse monitoring, and prototype irrigation setups where data-driven watering is required. It works smoothly with Arduino, Raspberry Pi, ESP32, and similar development boards, making integration and testing quick and beginner-friendly. With consistent performance and a user-friendly interface, the SmartElex Soil Moisture Sensor is a practical choice for DIY electronics, academic projects, and early-stage product development focused on smart agriculture and plant care solutions. Features: Measures soil moisture level for plant and irrigation monitoring Simple analog output for easy data reading and interpretation Works smoothly with Arduino, Raspberry Pi, and ESP32 boards Ideal for smart irrigation, gardening, and IoT-based agriculture Beginner-friendly design for quick setup and testing Suitable for DIY projects, classrooms, and agricultural prototypes

SmartElex PL2303 USB To UART Communication Converter Module The SmartElex PL2303 module is a reliable USB to UART converter designed to make serial communication simple and accessible for embedded projects. It helps users connect microcontrollers and development boards to a computer through USB, solving common debugging and programming challenges. This USB to Serial TTL Module is ideal for students, makers, educators, engineers, and startups who need a dependable interface for testing, flashing, and communicating with serial devices. This module works smoothly with popular platforms such as Arduino, Raspberry Pi, and ESP32, making it useful for robotics, IoT development, automation systems, and rapid prototyping. Its plug-and-play design allows quick setup without complex wiring, helping users save time during development and troubleshooting. Whether used for firmware upload, serial monitoring, or device communication, this converter offers stable performance and easy integration for everyday electronics projects. Features: Reliable USB to UART converter for serial communication Based on the PL2303 chipset for stable data transfer Compatible with Arduino, Raspberry Pi, ESP32, and similar boards Plug-and-play operation for quick setup and use Ideal for programming, debugging, and serial monitoring Suitable for robotics, IoT, automation, and DIY electronics projects

SmartElex VL53L5CX ToF Image Sensor The SmartElex VL53L5CX ToF Image Sensor is a compact, high-performance ToF Image Sensor designed for precise short-range distance sensing and spatial awareness. Based on ST’s advanced VL53L5CX chipset, this 64 pixel Time-of-Flight (ToF) 4 meter ranging sensor combines a SPAD array, infrared filters, and diffractive optical elements (DOE) to deliver consistent and accurate ranging even under challenging ambient lighting and different cover glass materials. It supports multizone distance measurements up to 4000 mm across all 64 zones with a wide 63° field-of-view, operating at up to 15 Hz. ST’s patented histogram algorithms enable reliable detection of multiple objects within the FoV while minimizing crosstalk beyond 60 cm. This short range ToF sensor is ideal for applications like 3D room mapping, robotics obstacle detection, gesture recognition, IoT systems, laser-assisted autofocus, and AR/VR enhancements. Note: The VL53L5CX is unique in that it requires firmware to be loaded via the I2C bus at power-on. Because this firmware is ~90k bytes, we recommend a microcontroller with enough storage to hold both the VL53L5CX firmware and your program code. Features: Model: VL53L5CX. Multizone ranging output with 4x4 or 8x8 independent zones. Up to 400 cm range 60 Hz frame rate capabilities. Operating voltage: 3.3 volts. I2C Address: 0x52. Emitter: 940 nm invisible light vertical cavity surface emitting laser (VCSEL), with integrated analog driver. Using diffractive optical elements (DOE) on both transmitter and receiver, the field of view is 63 degrees diagonally square.

7Semi MMC5983MA 3-axis Mini Magnetometer Sensor Breakout Module The 7Semi MMC5983MA 3-axis Mini Magnetometer Sensor Breakout Module is a high-precision magnetic sensor designed to measure magnetic fields along three axes with excellent accuracy and stability. It supports a magnetic field range of ±8 Gauss, delivering ultra-low noise and high-resolution output for reliable data. Communicating through a standard I2C interface, this magnetometer sensor ensures low power operation and fast response, making it ideal for navigation systems, orientation tracking, digital compasses, and magnetic anomaly detection. Its compact form factor allows seamless integration into space-constrained electronics, IoT devices, and embedded applications where precise magnetic sensing is essential. Features: Triple-Axis Magnetic Sensing provides great precision across three axes, with 0.4mG resolution and ±0.5° heading accuracy. High Dynamic Range and Resolution: ±8G FSR, 18-bit operation for precise measurements. Built-in Degaussing Circuitry: Effectively eliminates residual magnetization, ensuring consistent performance even when exposed to high external magnetic fields. Advanced Compensation Features: On-chip sensitivity and temperature compensation ensure consistent readings under changing situations. Fast I2C Communication: The I2C protocol has a fast mode of up to 400KHz, allowing for easy integration with other devices. The energy-efficient design consumes only 1µA during power down, making it excellent for power-sensitive applications. Compact form factor: A small PCB layout with a horizontal 4-pin 2mm pitch JST connection, ideal for space-constrained applications.

7Semi DS18B20 2M Cable Waterproof Digital Temperature Probe The 7Semi DS18B20 2M Cable Waterproof Digital Temperature Probe is built for anyone who needs precise and stable temperature monitoring in challenging environments. With its stainless-steel sealed casing and durable 2-meter cable, this sensor delivers highly accurate readings, even when fully submerged or installed in remote locations. Whether you're monitoring aquaponics systems, greenhouse conditions, or industrial temperature processes, this digital probe ensures you get consistent and reliable data every single time. Designed with a simple 1-Wire digital interface, the DS18B20 works seamlessly with Arduino, Raspberry Pi, ESP boards, and other microcontrollers, making it ideal for hobbyists, engineers, and automation enthusiasts. Its long cable, waterproof build, and wide temperature range make it a versatile choice for environmental monitoring and precision-driven applications where stability and robustness matter the most. Features: Measures temperatures from –55°C to +125°C, making it suitable for industrial, environmental, and underwater applications. Provides ±0.5°C accuracy, ensuring stable and trustworthy readings. Fully waterproof stainless-steel enclosure protects against moisture, corrosion, and rugged terrain. Comes with a 2-meter high-strength cable to support remote, underwater, or difficult-to-access installations. Supports 9–12 bit resolution and easily integrates using its 3-wire connection and 1-Wire digital protocol.

SmartElex TPS61040 12V Boost Converter Module SmartElex TPS61040 12V Boost Converter Module is designed to step up lower DC voltages to a stable 12V output, making it an ideal solution when your circuit requires a higher operating voltage than the available power source. This 12V boost converter is especially useful for students, hobbyists, engineers, educators, and startups working with battery-powered electronics or low-voltage microcontroller projects. It solves the challenge of powering 12V devices from compact power supplies like 3V or 5V inputs, without needing bulky transformer-based solutions. As a 3V to 12V boost converter, it integrates easily with platforms like Arduino, Raspberry Pi, ESP32, and other development boards, making it highly suitable for robotics, IoT nodes, portable gadgets, automation circuits, and prototyping environments. Its compact design and reliable output make it a practical choice for powering sensors, actuators, communication modules, and small peripherals that need a 12V line. This module helps builders maintain efficiency and portability in their designs while ensuring stable performance across a range of real-world applications. Features: Steps up lower DC input to a stable 12V output Based on the TPS61040 high-efficiency boost converter IC Enables 12V operation from 3V, 5V, or other low-voltage sources Ideal for battery-powered and portable electronics Compatible with Arduino, Raspberry Pi, ESP32, and similar boards Suitable for sensors, small modules, IoT devices, and automation projects

Cytron Maker UNO X – Arduino Compatible Development Board for Classroom The Cytron Maker UNO X is a beginner-friendly, classroom-ready Arduino-compatible development board designed to simplify STEM education. Equipped with built-in LEDs on every digital pin, a programmable push button, a piezo buzzer, and a powerbank-friendly design, it eliminates messy wiring and allows students to start coding instantly. This board is ideal for Arduino beginners, school STEM labs, coding clubs, training centers, and anyone learning microcontroller basics. With plug-and-play functionality and seamless compatibility with Arduino IDE, it delivers a smooth learning experience for educators and students alike. Created with the needs of teachers in mind, the Cytron Maker UNO X features an onboard half-size breadboard and perfboard for quick prototyping, making it easy to build hands-on electronics projects right out of the box. Powered by the ATmega328P, and complete with essential interfaces like UART, SPI, I2C, PWM pins, and analog inputs, this board is perfect for exploring coding, electronics, and robotics in a structured classroom setup. Whether for STEM workshops, school projects, or Arduino training programs, Maker UNO X provides an engaging, frustration-free learning experience. Features: Fully Arduino UNO-compatible board designed specially for classrooms and STEM beginners. Built-in LED indicators on every digital pin, allowing students to visualize code output instantly without wiring. Includes piezo buzzer, programmable push button, and powerbank-friendly operation for portable projects. Comes with an onboard perfboard prototyping area and a half-size breadboard to simplify hands-on experiments. Powered by the reliable ATmega328P microcontroller with 16MHz clock speed and full support in Arduino IDE. Offers 20 digital I/O pins, 6 PWM pins, 6 analog inputs, and communication interfaces (UART, SPI, I2C). Features 32KB Flash, 2KB SRAM, 1KB EEPROM, making it ideal for beginner programming and small-scale electronics projects. Uses a USB Micro-B interface with CH9340 USB-UART chip (note: not supported on Windows 7). Designed by Cytron to support educators - ensures faster learning with fewer wiring issues and more hands-on coding.

7Semi BME680 Temperature, Humidity, Pressure & Air Quality Sensor Breakout with Qwiic Interface The 7Semi BME680 Environmental Sensor Breakout is a compact yet powerful module designed for applications that require accurate measurement of temperature, humidity, pressure, and indoor air quality. Built around the trusted Bosch BME680 sensor, it provides dependable multi-parameter environmental data in real time, making it ideal for IoT projects, smart home automation systems, and portable environmental monitoring devices. Its efficient gas sensor intelligently detects VOC levels, helping you assess indoor air quality with ease. Engineered for universal compatibility, this breakout includes both a voltage regulator and level shifter, enabling seamless integration with 3.3V and 5V microcontroller platforms such as Arduino and Raspberry Pi. The Qwiic connector and I2C/SPI support ensure quick setup without messy wiring, while its compact size makes it perfect for wearables and space-constrained builds. With low-power operation, stable readings, and selectable I2C addresses, this module provides developers with a simple and reliable way to enhance environmental sensing in modern embedded projects. Features: Provides accurate measurement of temperature, humidity, pressure, and VOC-based air quality, making it an all-in-one environmental sensor solution. Supports I2C and SPI communication, ensuring smooth integration with Raspberry Pi, Arduino, ESP32, and other development boards. Includes selectable I2C addresses (0x76/0x77) to allow multiple sensors on a single bus without conflicts. Features a built-in voltage regulator and level shifting circuitry, allowing safe use with both 3.3V and 5V systems. Designed with low power consumption, suitable for long-term, battery-powered, or portable applications. Comes in a compact 19×19 mm breakout form factor, perfect for handheld devices, IoT wearables, and mini weather stations. Provides stable VOC readings after a short burn-in time, ensuring reliable indoor air quality measurements.