Quadcopter DIY Drone Combo Kit for Beginners Fly into the exciting world of drones with our Quadcopter DIY Drone Combo Kit. This full kit is designed to spark your interest and passion for crafting. Designed for beginners and DIY enthusiasts, this RC drone making kit includes all of the necessary components to build your own copter. Explanation of each component included in the DIY Drone Kit for Beginner in more detail:  F450 Frame: The F450 Frame is the main frame. It has a 450mm diameter and is strong yet lightweight, similar to the DJI frame. This frame was designed to withstand several crashes while maintaining a decent balance of strength and weight. The optimized frame design enables modification and extension with autopilot systems and DJI devices. 1000Kv BLDC Motor: This Quadcopter kit comprises four 1000Kv brushless DC (BLDC) motors. BLDC motors are commonly used in drones because to their high efficiency, low maintenance requirements, and superior power-to-weight ratio. The "Kv" rating denotes the motor's speed constant, or the rotational speed per volt applied. ESC: The kit provides four Electronic Speed Controllers (ESCs), one for each motor. ESCs are essential for controlling the speed and direction of the motors. These brushless ESCs are pre-programmed from the factory, ensuring convenience and ease of use. 2-3 Cell Battery Charger: This is a battery charger that is compatible with 2-3 cell Lithium Polymer (LiPo) batteries. LiPo batteries are commonly used in drones due to their high energy density and lightweight properties. 2200 mAh Lipo Battery: The kit comes with a 2200mAh Lithium Polymer (LiPo) battery. LiPo batteries are commonly used in drones as they provide a high energy output for their weight, allowing for longer flight times. Fly Sky FS-CT6B 6ch 2.4GHz Transmitter & Receiver: The Fly Sky FS-CT6B is a 6-channel 2.4GHz transmitter and receiver system. The transmitter is used to control the quadcopter, and the receiver receives the signals from the transmitter and relays them to the flight controller. APM 2.8 Flight Controller (Without Compass): The Flight Controller is the brain of the quadcopter. It processes data from various sensors, such as gyroscopes and accelerometers, to stabilize the flight and maintain its orientation during flight. The APM 2.8 is a popular flight controller used in DIY drone projects. XT60 Male Connector: The XT60 Male Connector is used for connecting the LiPo battery to the power distribution board of the quadcopter. Propeller (2CW, 2CCW): The kit includes four propellers, with two clockwise (CW) and two counterclockwise (CCW) rotation propellers. The correct combination of CW and CCW propellers is essential for it to achieve stable flight.These components, when assembled together, form the basic structure and control system of the quadcopter, allowing you to build and customize your own drone for various applications.   Explore other DIY Drone Kits   Warning: Flying quadcopter platforms require a considerable amount of practice and skill. If not handled correctly, it can cause severe injury. Please read the flight controller manual carefully before starting. Please make sure that you remove the props before doing any calibration and/or configuration changes.   Also check our drone spare parts collection, including motors, propellers, ESCs, frames, and various accessories.   Note: The package weighs 1500 grams (approx) and Dimensions: 21 x 15 x 9cms (approx) Package includes: 1 x F450 Frame  4 x 1000kv BLDC Motor  4 x ESC Motor  1 x 2-3 Cell Battery Charger 1 x 2200 mAh Lipo Battery 1 x Fly Sky FS-CT6B 6ch 2.4GHz Transmitter & Receiver 1 x APM 2.8 Flight Controller (Without Compass) 1 x XT60 Male Connector 4 x Propellor (2CW, 2CCW ) Specifications: Motor 1000Kv BLDC Motor Frame Model F450 (Red-White) Flight Controller APM 2.8 Flight Controller (Without Compass) Battery 2200 mAh Lipo Battery Transmitter Fly Sky FS-CT6B 6ch 2.4GHz Transmitter & Receiver

DIY F450 Quadcopter Frame Kit Assembling this F450 quadcopter frame kit is easy with pre-threaded brass sleeves for all of the frame bolts, so no lock-nuts are required. It utilizes one size of bolt for the entire build, making the hardware very easy to keep in order and only requiring one size of hex wrench to assemble. The F450 quadcopter frame kits  consist of the following parts:  F450 Quadcopter Frame The F450 Quadcopter Frame is a 450mm quad frame built from quality materials. The main frame is glass fiber while the arms are constructed from ultra-durable polyamide nylon. F450 also comes with stronger molded arms, so no more arm breakage at the motor mounts on a hard landing. A2212 1000Kv motor The A2212 1000Kv motor is a BLDC brushless outrunner motor specifically made for quadcopters and multirotors. It provides high performance and brilliant efficiency. 1045 propellor A set of 2 x 1045 Propellers. The set includes one clockwise rotating and one counter-clockwise rotating propeller with 2 x propeller shaft adapters. The adapters allow the propeller to be used with motors of different shaft diameters. Simonk 30Amp ESC brushless motor The Simonk 30A ESC is an Electronic Speed Controller (ESC) which is used to drive brushless DC motors and is capable of supplying current up to 30A. The 30A Simonk controller is made for quadcopters and multicopters to provide faster and better motor speed control. How do you install the ESCs and the brushless motors into the F450 frame? Installing the ESCs and the brushless motors on the quadcopter frame kit is a simple operation. Firstly, mount the motors on the arms of the quadcopter frame kit by screwing the motors onto the motor mounting plates. Mount the motors such that the wires are in the direction of the centre of the frame. Plug the ESCs to the brushless motors and then zip tie the ESCs and the wires to the arms of the quadcopter frame firmly. The 4 ESC's need to be soldered to the bottom PCB (bigger in size). The red wires of the ESCs must be soldered to the positive terminal while the black wires must be soldered to the negative terminal. To solder the wire first you need to tin the point on the board by applying some solder. Ensure the solder joint is clean and strong. Also check Smart 100 Carbon Fiber FPV RC Racing Quadcopter Frame Spare Parts Accessories Kit. The frame is made of carbon fiber and is compatible with 65mm propellers and 8520 coreless motors. It can be used with 1s 3.7v lipo batteries. The kit also includes some spare parts and accessories.  read our blog explaining the what do you need to build a drone, which provides information about building a drone and essential components required for the process. PACKAGE INCLUDES: 4 x 1000 KV motor 4 x 30Amp ESC brushless motor 2 pairs x 1045 propellor 1 x F450 Quadcopter Frame Specifications: Motor KV (RPM/V) of BLDC motor 1000 Maximum Power (W) of BLDC motor  150 Current Rating of Simonk 30A ESC 30A BEC of Simonk 30A ESC 5V 2A Material of Quadcopter Frame Glass fiber Package Dimensions 15 x 9 x 8cms Package weighs 750 grams

DIY Drone Kit with WiFi and Camera The DM002HW Mini DIY Drone is a great and inexpensive drone kit. You don’t need serious mechanical skills or even the ability to solder to put it together. It really is a great way to understand the components that go into a drone (hint: there is a lot less to them than you might think). When you are done putting drone making kit together, you’ll have an excellent quadcopter that is fun to fly. You’ll be hard-pressed to find a more inexpensive drone that performs as well as the DM002HW. The DM002HW is a quick and nimble quadcopter that is fairly easy to fly. It has three different speeds making it easy to learn in slow mode, and when you get comfortable you can bump it up to medium and when you are feeling ready go full speed in high mode. The DM002HW will also flip with the push of a button. WIFI FPV / ascend/descend/forward / backward / side flying /  Slow/Medium/High speed / turn round / 360°rolling action / 360° accurate localization / LED / One key return Check out our collection of high-quality parts of drone to find everything you need for your drone projects! Unleash Your Inner Pilot with Our DIY Drone Kit With Camera and WIFI Are you ready for a thrilling adventure into the world of drones? Look no further than our Drone making kit with WiFi and Camera, designed for both beginners and enthusiasts alike! With this kit, you'll experience the joy of building your very own drone and taking to the skies in no time. Soar High with WiFi FPV and Capture Breathtaking Moments Get ready to experience flying like never before with the WiFi FPV feature! Transmit live images directly to your phone and witness the world from a bird's-eye view. Whether you're exploring picturesque landscapes or capturing stunning aerial shots, the possibilities are endless with our drone making kit. Easy to Assemble, Fun to Fly Don't worry about complicated setups or technical know-how – our DIY Drone Kit with Camera is designed to be user-friendly and requires no soldering. Assembling your drone will be a breeze, and you'll be amazed at how stable and easy to control it is. With the one-key return function, finding your way back home becomes a piece of cake! Endless Fun Indoors and Outdoors Fly your drone both indoors and outdoors, thanks to its 6-axis gyro that ensures stable flight in any environment. Whether you're navigating tight corners indoors or soaring through open skies outside, our Drone Kit is up for the challenge. Embrace the Joy of DIY and Unlock Your Creativity Building your own drone is not just an exciting adventure; it's also a fantastic learning experience. Understand the components that go into a drone and gain insights into its inner workings. As you put together this masterpiece, you'll feel a sense of accomplishment that only DIY projects can deliver. The Perfect Gift for Drone Enthusiasts Looking for a unique and thoughtful gift for a drone enthusiast? Our DIY Drone Kit with WiFi and Camera is the perfect choice! Let them embark on a thrilling journey of drone building and exploration, capturing unforgettable moments from the sky. Note: This model(DM002HW) comes with Wifi and FPV Camera Comparison: Specification DM002 DM002HW Speed control Yes Yes Wifi FPV Camera No Yes Wifi connection No Yes Colorful LED's Yes Yes Smartphone control No Yes Altitude Hold Yes Yes headless mode Yes Yes One key taking off Yes Yes One key landing Yes Yes Gyroscope 6-axis 6-axis 360 degree flip Yes Yes Auto Home Yes Yes Battery 3.7V 300mAh Lipo Battery 3.7V 300mAh Lipo Battery Charging Time 60-80 minutes 60-80 minutes Frequency 2.4Ghz 2.4Ghz Flight time around 7 minutes around 7 minutes Operating environment Indoor and outdoor Operating environment Assembly guide Included Included Assembly tools Included Included Why Choose Iotcart for DIY Drone Kit With Camera and WIFI? Product Quality: We are known for offering top-notch quality drone making kits, and when it comes to quadcopter drone kit with camera then we offer components that are reliable, well-made, and of great quality. Product Variety: In our store, you will get a variety of drone kits with camera and WIFI based on your project requirements. So if you are an expert or a beginner looking for the best DIY drone kit with camera then this is the right place. Value for Money: Iotcart consistently offers competitive prices for DIY drone components. And we always ensure that You get the best quality of the products and support. On-time Shipping and Delivery: Getting your drone kit with camera and WIFI on time is important, especially when you're excited to begin your drone project. Iotcart may provide speedy shipping choices, ensuring you get your drone making kit promptly and can start immediately without any unnecessary delays. DIY Drone Kit DM002 Package Includes: 1 x DM002HW RC Quadcopter 1 x Transmitter  1 x 3.7V 300mAh Battery 1 x USB Charger 8 x Propellers 4 x Motor 1 x English manual Take a look at our collection of Drone Making Kit, available at the best prices in India! Specifications: Frequency  2.4GHz Camera 0.3MP 480P Gyro 6 axis Night Flight Yes Flight time Around 7 minutes Charging time About 60-80 minutes Remote Control Distance About 100 meter Battery For Quadcopter 3.7V 300mAh Lipo Battery (included) Operating environment Indoor & Outdoor Dimension 5x5x2 cm Weight 350gm

DIY 4CH 6-Axis Gyro Mini Quadcopter Kit This DIY 4 channel mini quadcopter kit is a building block toy designed for kids to develop imagination and an interest in electronics and technology. They have a special design and are easy to install and can fly at a height of 100 feet. The 6 axis gyro control of the DIY mini quadcopter kit ensures stable flight and an easy operation. This mini quadcopter kit features a 2.4GHz technology adopted for anti-interference for a smooth flying operation.  DIY Drone Kits Package Includes: 1 x DIY Mini Quadcopter Kit Features of the DIY 4CH 6-Axis Gyro Mini Quadcopter Kit   Kit  Mini Quadcopter Kit Number of channel  4 Axis  6 Axis Gyro  Colour  Red  Height  100ft Radio Controller  Yes Weight  75 grams  Dimensions (approx) 8 x 8 x 3cms

DIY CX-002 Lark Quadcopter Steps to assemble the LARK Quadcopter Take the bottom frame of the quadcopter (A-2) and place the battery (A-12) at the centre Take out the electronic board (A-11), snap it into the frame (A-14) and mount it over the battery Next, take the forward and reverse motor and place it into the motor mounts correctly. The motors of the same number should be mounted diagonally opposite to each other. Looking directly towards the front side of the drone frame, motor number A-15 should be on the right side and motor A-13 on the left side. On the rear side, motor A-15 will be on the left and motor A-13 on the right. Note: If the motor placements are incorrect, the drone may not fly as the motors will spin incorrectly to generate lift. Make sure the motor wires face towards the centre of the drone and motor should be connected to the corresponding motor pins on the electronics board. Install the switch button (A-16). The switch button symbol should be facing in the same orientation as the drone and the mounting point of it near the rear end of the drone. Finish of the main body assembly by snapping on the top frame (A-1) to the bottom frame. Secure the upper and lower body by inserting in restriction parts (A-17) into the four body arms. Install the protective hood (A-3, A-4, A-5 and A-6) to each of the drone’s arm. Insert the hood into the restriction part first before snapping the bottom part of the hood to the fuselage. Insert the forward and the reverse propeller to the motor shaft on the four arms of the quadcopter. With the quadcopter front facing the user, the A-10 propeller should be mounted on the right side and the A-8 propeller should be mounted on the left side. Like the motor the rear arms will have the propellers of the same part placed diagonally opposite to the front, i.e. A-10 on the left and A-8 on the right. Make sure the propellers are fully inserted into the shaft as incorrectly inserted ones may fling of the quadcopter when it starts to fly. Note: If the propeller placements are incorrect, the drone may not fly as the propellers will push air towards the wrong direction to generate lift. Make sure the propellers can spin freely and the wind blows downwards. If not, the propellers might be placed incorrectly. Place the caps on the propellers, to prevent the propellers from detaching mid-flight.  Steps to connect the remote control to the Lark Quadcopter Put the AAA batteries in the remote control of the Lark quadcopter. Switch on both the remote control and the quadcopter. Move the joystick forward and backward and wait for the blinking on the Lark quadcopter to stop. Then press the throttle once. The Lark drone is now connected to the remote control. The DIY CX-002 Lark Quadcopter package includes: Up and Down Body x 1 2.4G Transmitter x 1 3.7V 400mAh Li-Po Battery x 1 Battery USB Charger x 1  Propeller  x 8 Propeller Protector and Pad set x 4  Receiving Board x 1  Coreless Motor x 4 Fixed Frame  x 1  Switch Button  x 1  Restricted Accessory x 4 English Manual  x 1  Dimension (approx) 6 x 6 x 3cms Weight (approx) 35 grams

DJI Naza-M Lite Multi-Rotor Quadcopter Flight Controller System The DJI Naza-M Lite Multi-rotor quadcopter flight controller is perfect for entry-level drone enthusiasts. The advanced attitude stabilization algorithm of the DJI Naza flight controller inherits the outstanding flight stability of DJI drones and quadcopters. The flexibility and stability provided by the DJI flight controller provide a great flight experience for hobbyists. The DJI Naza flight controller provides great scope for aerial photographers with the integration plug-and-play GPS module. With the help of a GPS module, this multirotor flight controller system can lock the position and altitude accurately even in windy conditions. The DJI flight controller has a built-in gimbal stabilization function that is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft. The DJI Naza quadcopter flight controller features a failsafe mode. This mode gets activated when the communication between MC and the transmitter is disconnected. When the failsafe mode of the DJI Naza controller gets activated the outputs of all command sticks from the controller will go to the center position. Sometimes a low battery voltage can have harmful consequences on the drone which may result in crashes. In such a situation, the flight controller is designed for low-voltage protection. This system will help the drone to descend and land safely. Note: The package weighs 500 grams (approx) and Dimensions: 15 x 9 x 5cms (approx) Also check DIY CX-002 Lark Quadcopter. The Lark is a great option for beginners because it is inexpensive and easy to put together.  Package Includes: DJI Naza Controller Unit x 1 DJI Remote LED module for Coding and Interfacing with PC x 1 DJI Power Module x 1 DJI USB to MicroUSB Cable (18 inches) x 1 Servo Cables (5 Inches Each) x 8 Set of Precise Double sided tape x 1

Material: carbon fiber Dimension: 85x85x25mm Compatible with 65mm propeller Compatible with 8520 coreless motor

DIY Drone Kit With Manual (Camera Not Included) The DM002 Mini DIY Drone is an excellent and affordable drone making kit that allows you to build your own quadcopter or drone without requiring advanced mechanical skills or soldering expertise. It provides a fantastic opportunity to grasp the various components that constitute a drone, which surprisingly aren't as complex as they seem. Assembling the drone is a fun and exciting process, and once you're finished, you'll have a quadcopter that is both enjoyable to fly and highly functional.It's hard to come across a more cost-effective drone kit that performs as well as the DM002. This quadcopter is quick, nimble, and relatively easy to pilot, with three different speed modes to choose from. You can start in slow mode and gradually progress to medium and high speeds as you become more comfortable flying it. Additionally, the DM002 drone making kit has a button that allows you to perform flips with ease. Also check out drone kit with camera, which is a versatile and affordable drone kit available on Iotcart. This kit offers an engaging experience for both beginners and enthusiasts. Function:/ ascend/descend / forward / backward/side flying / Slow/Medium/High speed/turn round / 360°rolling action / 360° accurate localization / LED / One key return Note: This model(DM002) doesn't come with Wifi and FPV Camera Check out our collection of high-quality parts of drone to find everything you need for your drone projects! LED status - 1)Red when charger is connected to the battery. 2)No LED blinks when the charger is connected to the source(while charging). 3)Again red LED glows when the battery is charged completely. Comparison: Specification DM002 DM002HW Speed control Yes Yes Wifi FPV Camera No Yes Wifi connection No Yes Colorful LED's Yes Yes Smartphone control No Yes Altitude Hold Yes Yes headless mode Yes Yes One key taking off Yes Yes One key landing Yes Yes Gyroscope 6-axis 6-axis 360 degree flip Yes Yes Auto Home Yes Yes Battery 3.7V 300mAh Lipo Battery 3.7V 300mAh Lipo Battery Charging Time 60-80 minutes 60-80 minutes Frequency 2.4Ghz 2.4Ghz Flight time around 7 minutes around 7 minutes Operating environment Indoor and outdoor Operating environment Assembly guide Included Included Assembly tools Included Included Also check 1050 mAh 3.7V single-cell rechargeable LiPo battery, with high capacity, versatile performance with a 1C discharge rate, cutting-edge technology with PCM protection for safety, and a premium build with lightweight materials. Assembly of DM002 DIY Drone Package Includes: 1 x DM002 RC Quadcopter (Without Wifi and Camera) 1 x Transmitter 1 x 3.7V 300mAh Battery 1 x USB Charger 4 x Propeller 4 x Motor 1 x English manual Specifications: Frequency 2.4GHz Camera No Wifi No Gyro 6 axis Night Flight Yes Flight time Around 7 minutes Charging time About 60-80 minutes Remote Control Distance About 100 meter Battery For Quadcopter 3.7V 300mAh Lipo Battery (included) Operating environment Indoor & Outdoor Dimension 5x5x2 cm Weight 310gm

Heliway 902 Series 6 Axis Quadcopter Kit The Heliway 6 Axis quadcopter kit is manufactured with nontoxic ABS material which makes it the ideal DIY toy kit for children. The ABS material used in the Heliway Quadcopter kit makes the quadcopter strong and stable. The parts used in the DIY Heliway quadcopter kit make it very easy for assembling and playing with. Package Includes: 1 x Quadcopter (Unassembled) 1 x Battery for Quadcopter 1 x Remote Controller 1 x USB Charging Cable 1 x Spare Accessories Bag 1 x User Manual Quadcopter Kit Specifications Brand  Heliway Type Brushed Racing Quadcopter Model  902 Series Built-in Gyro  6 Axis Gyro  Material ABS Material Remote Control 2.4GHz Wireless Remote Control  Channel 4-Channels  Battery 3.7V 600mAh lithium-ion battery ( built-in )  Flying Time 5~6mins  Dimensions  13 x 15 x 6cms Weight  625 grams