100 Ohm Resistor - (Pack of 10) The 100 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour code chart: Applications: To limit current in a circuit To measure current in a circuit To generate heat To remove electrical energy To divide voltage To set the gain of an amplifier To set a time delay To set frequency of an oscillator To protect against surges To absorb unwanted signals Electronic electricity meter To measure temperatures Package Includes: 10 x 100 Ohm Resistors Specifications: Resistance  100 Ohm Resistors Material  Carbon Film Resistors Power (Watts) 0.25W, 1/4W Tolerance +/- 5% Case Axial  Dimensions  0.094" Dia x 0.248" L (2.40mm x 6.30mm) Weight  5 grams

10k Ohm Resistor - Pack of 10 Resistors are electronic components that have a specific, never-changing electrical resistance. The resistor's resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can't generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Common resistors are used to limit current, divide voltages, and pull up I/O lines. 10K ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. Cracking the Resistor Color Code: How to read Resistor Colour Codes. Applications: To limit current in a circuit To measure current in a circuit To generate heat To remove electrical energy To divide voltage To set the gain of an amplifier To set a time delay To set frequency of an oscillator To protect against surges To absorb unwanted signals Electronic electricity meter To measure temperatures Package Includes: 10 x 10k Resistors Specifications: Resistance  10K ohm Material  Carbon Film Resistors Dimensions  3 x 1 x 1cms  Weight  5 grams

470 Ohm Resistor - (Pack of 10) The 470 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour Coding Table: Package Includes: 10 x 470 Ohm Resistors Specifications Resistance  470 Ohm Material  Carbon Film Resistors Dimensions  3 x 1 x 1cms  Weight  5 grams

2.2k Ohm Resistor - (Pack of 10) The 2.2k ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.Also check our 100k resistor (100K ohm Carbon Film Resistors, a pack of 10 essential components for electronics projects.0 Resistor Colour Coding: Package Includes: 10 x 2.2k Ohm Resistors Specifications Resistance  2.2k ohm Material  Carbon Film Resistors Dimensions  3 x 1 x 1cms  Weight  5 grams

100K Ohm Resistor The 100K ohm Carbon Film Resistors, available in a pack of 10, are essential for engineering projects and DIY enthusiasts, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. The 100K ohm resistor, as a passive component, finds applications in reducing current flow, adjusting signal levels, and more in electronic circuits. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Key

1M Ohm Resistor - (Pack of 10) The 1M ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour Code: Package Includes: 10 x 1M Ohm Resistors Specifications: Resistance  1M Ohm Resistors Material  Carbon Film Resistors Power (Watts) 0.25W, 1/4W Tolerance +/- 5% Case Axial  Dimensions  0.094" Dia x 0.248" L (2.40mm x 6.30mm) Weight  5 grams

10M Ohm Resistor - (Pack of 10) The 10M ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour Coding: Package Includes: 10 x 10M Ohm Resistors Specifications: Resistance  10M Ohm Resistors Material  Carbon Film Resistors Power (Watts) 0.25W, 1/4W Tolerance +/- 5% Case Axial  Dimensions  0.094" Dia x 0.248" L (2.40mm x 6.30mm) Weight  5 grams

1k Ohm Resistor - (Pack of 10) A 1k Ohm resistor is an electronic component that is used to reduce the flow of electric current in a circuit. It is a passive component that is designed to resist the flow of current, and it is often used to limit the current in a circuit to protect other components from damage. The value of a resistor is typically measured in Ohms, and the value of a 1k Ohm resistor is 1,000 Ohms. This value represents the resistance of the resistor to the flow of electric current. Lets understand the Resistor Colour Coding better with the help of Resistor Colour cod Resistor colour Colour Code Black 0 Brown 1 Red 2 Orange 3 Yellow 4 Green 5 Blue 6 Violet 7 Gray 8 White 9 Using the above chart, one can find that the following colors stand for the respective color code. Each resistance color code has a tolerance value.  Let's see what are the tolerance Percentages: Resistance colour code  Tolerance value  Brown  ±1% Red ±2% Gold ±5% Silver ±10% Resistor Colour Code Calculator  The below table shows the carbon resistor colour code: Band 1 Band 2 Band 3 Band 4 Colour First  Second Multiplier Tolerance  Black 0 1 Brown 1 1 10 ±1% Red 2 2 100 ±2% Orange 3 3 1000 ±0.05% Yellow 4 4 10,000 ±0.02% Green 5 5 100,000 ±0.5% Blue 6 6 1,000,000 ±0.25% Violet 7 7 10,000,000 ±0.1% Grey 8 8 100,000,000 ±0.01% White 9 9 1,000,000,000 - Gold 0.1 ±5% Silver 0.01 ±10% Pink 0.001 -   Now, we will take the values of the first two or three bands from the left, depending on the total number of bands, then we will multiply that value by the multiplier to get the resistance value of the resistor. Note: Always read resistors from the left side to the right side. The first band is always closest to the lead and Gold-silver bands are always located at the last. Package Includes: 10 x 1k Ohm Resistor  Specifications Resistance  1k ohm Material  Carbon Film Resistors Dimensions  3 x 1 x 1cms  Weight  5 grams

220 Ohm Resistor - (Pack of 10) A 220-ohm resistor is an electronic component that is used to resist the flow of electricity in a circuit. Resistors are used in a wide variety of electronic circuits to control the flow of current and protect other components from damage. 220-ohm resistors are a commonly used resistance value in electronic circuits. They are typically small, cylindrical components with colored bands on them that indicate their resistance value. The color bands on a 220-ohm resistor typically include red, red, brown, and gold. Resistor Colour Code: Package Includes: 10 x 220 ohm Resistors Specifications Resistance  220 ohm Material  Carbon Film Resistors Dimensions  3 x 1 x 1cms  Weight  5 grams

1 Ohm Resistor - (Pack of 10) The 1 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour Code Chart: Package Includes: 10 x 1 Ohm Resistors Specifications: Resistance  1 Ohm Resistors Material  Carbon Film Resistors Power (Watts) 0.25W, 1/4W Tolerance +/- 5% Case Axial  Dimensions  0.094" Dia x 0.248" L (2.40mm x 6.30mm) Weight  5 grams

220k Resistor (Pack of 10) The carbon film resistor is a 22k ohm resistor with 5% tolerance. It is a type of fixed resistor that uses carbon film to restrict the electric current to certain level. These types of resistors are widely used in the electronic circuits.  Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This allows them to stand well with repeated inserts into the solderless panels. Package Includes: 1 x 220k Resistor (Pack of 10) Specifications: Resistance 220k ohm Tolerance 5% Weight  2 g

330 Ohm Resistor - (Pack of 10) The 330 ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour Codes: Package Includes: 10 x 330 Ohm Resistors Specifications Resistance  330 Ohm Material  Carbon Film Resistors Dimensions  3 x 1 x 1cms  Weight  5 grams

47k Ohm Resistor - (Pack of 10) 47k ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. Also check pack of 10 220k-ohm resistors available on the Iotcart website. These carbon film resistors have a tolerance of ±5% and are suitable for use in electronic circuits. The resistors offer stable performance, extensive resistance, small size, high operating temperature, and high ultimate voltage. They are particularly effective in audio circuits for reducing noise and enhancing circuit stability over a wide temperature range. Resistor Colour Code: Package Includes: 10 x 47k Ohm Resistors Specifications Resistance  47k ohm Material  Carbon Film Resistors Dimensions  3 x 1 x 1cms  Weight  5 grams

4.7k Ohm Resistor - (Pack of 10) 4.7k ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life. Resistor Colour Colour code Chart: Applications: To limit current in a circuit To measure current in a circuit To generate heat To remove electrical energy To divide voltage To set the gain of an amplifier To set a time delay To set frequency of an oscillator To protect against surges To absorb unwanted signals Electronic electricity meter To measure temperatures also check our 100K Ohm Resistor (Pack of 10) where you can get 100k resistor color code Package Includes: 10 x 4.7k Ohm Resistors Specifications Resistance  4.7k ohm Material  Carbon Film Resistors Dimensions  3 x 1 x 1cms  Weight  5 grams

33k Ohm Resistor - (Pack of 10) The 33k ohm Carbon Film Resistors are typical axial-lead resistors, which have much better temperature stability and provide lower noise, and are generally better for high frequency or radiofrequency applications. A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. Resistor Colour Code: Package Includes: 10 x 33k Ohm Resistors Specifications: Resistance  33k Ohm Resistors Material  Carbon Film Resistors Power (Watts) 0.25W, 1/4W Tolerance +/- 5% Case Axial  Dimensions  0.094" Dia x 0.248" L (2.40mm x 6.30mm) Weight  5 grams