M5GO IoT Starter Kit V2.6

M5GO IoT Starter Kit V2.6

(0)

As low as ₹11248.73 ₹14060.90 Incl. GST (No Hidden Charges)

OUT OF STOCK

For bulk orders or wholesale inquiries, please contact us at iotcart.help@gmail.com or call/message us at +918050206487.

Add To Cart

M5GO IoT Starter Kit V2.6 The M5GO IoT Starter Kit is a cost-effective IoT starter development kit. The kit contains Core Controller M5GO + 6 expansion units with different functions (sensors/actuators/splitters) + . The core controller M5GO adopts Espressif ESP32 chip, equipped with 2 low-power Xtensa® 32-bit LX6 microprocessors, with a main frequency of 240MHz. With 16M FLASH memory for larger program size. Besides its power, the MCU also supports Wi-Fi & Bluetooth dual-mode, which can be used to build smart wearable devices, smart homes, and other applications. M5GO IoT controller Low code development: Supports UIFlow graphical programming platform, scripting-free, cloud push Fully compatible with Arduino, ESP32-IDF, and other mainstream development platforms FreeRTOS support, with dual-core and multitasking mechanisms, can perform the tasks efficiently, Program optimization. High Integration: 2.0-inch IPS display panel, 6-axis IMU, programmable RGB lights x10, microphone, speaker, custom buttons x3 Built-in Li-ion power supply, integrated power management chip, supports TypeC interface and POGO PIN interface power supply Finely tuned RF circuitry for stable and reliable wireless communication Strong expandability: GROVE expansion ports x3 (I2C, GPIO, UART) Easy access to M5Stack hardware and software system, stackable module design, plug-and-play sensor expansion 6x expansion units ENV UNIT III: Temperature, humidity, and atmospheric pressure sensors, with an I2C communication interface for rapid acquisition of environmental information. PIR UNIT: Body sensor, passive pyroelectric for human body sensing, digital signal output status. ANGLE UNIT: Knob potentiometer, analog signal input for music/lighting adjustment IR UNIT: Integrated infrared transmitter, receiver. Free coding, infrared transceiver. RGB UNIT: 3x Programmable RGB LED, support programming to control any color display HUB UNIT: I2C device splitter, expand single I2C bus to 3 channels, can access different I2C address devices Switch on/off operation: Power on: Click the left red buttonPower off: Quick double click the left red buttonUSB power: By default, It can not be shut down when USB power is on. Applications: STEM Education IoT Controller Smart Home Smart Weather Station Package Includes: 1x M5GO6x Units(ENV III, IR, RGB, PIR, ANGLE, HUB)4x LEGO Blocks12x LEGO Connections4x GROVE cable1x Type-C USB (20cm)1x Quick Start Guide Specifications: ESP32-D0WDQ6-V3 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth Flash 16MB Input Voltage 5V @ 500mA Host Interface TypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1 IPS Screen 2 inch, 320x240 Colorful TFT LCD, ILI9342C, 853nit max brightness Keys Custom Keys x 3 Speaker 1W-0928 Microphone Analog BSE3729 Microphone IMU 6-axis MPU6886 USB Chip CH9102F LED SK6812 RGB LED x 10 Antenna 2.4G 3D antenna Battery 500 mAh @ 3.7V Operating Temperature 0°C to 40°C Dimensions 54 x 54 x 21 mm Weight 228gm

Based on ESP32 development
16M FLASH
Integrated HD IPS display panel with various hardware peripherals
Rich resources interface, compatible with M5Stack stacking modules and sensors, Strong expandability
The base is compatible with 8mm size LEGO blocks, the structures just so interesting!
Microsoft Azure authentication device
Compatible with multi-platform development UIFlow, MicroPython, Arduino

ESP32-D0WDQ6-V3 240MHz dual core
Flash 16MB
Input Voltage 5V @ 500mA
Host Interface TypeC x1
IPS Screen 2 inch
Keys Custom Keys x 3
Speaker 1W-0928
Microphone Analog BSE3729 Microphone
IMU 6-axis MPU6886
USB Chip CH9102F
LED SK6812 RGB LED x 10
Antenna 2.4G 3D antenna
Battery 500 mAh @ 3.7V
Operating Temperature 0\u00b0C to 40\u00b0C
Dimensions 54 x 54 x 21 mm
Weight 228gm

To rate this product please login!

Related products

20%

Universal IOT Experiment Kit …

(0)

Universal IOT Experiment Kit for ESP32 This is a feast of IoT stuff, powered by M5Stack. It is an all-in-one Learning board powered by ESP32, which includes anything you can imagine in IoT + industrial application scenarios. Let's see what you can do with it: Robotic movement, the most commonly used serial communication port(RS485 RS232), Relay control, all different types of Button control, RF reader, speaker, Microphone, and more all able to be develop by an M5stack core device, so you can program this board with Blockly(UIFlow), Arduino, and Micropython. Based on application scenarios, we've partitioned them into different functional parts with a good-looking layout and full-function performance. Here comes the most powerful IIoT learning board. Universal IOT Experiment Kit Structure: Applications: IOT teaching experiment board Multi-function test board Package Includes: 1x Demo Board learning board 1x Power Adapter 1x RS232 cable 1x RFID Card 1x ID Card 16x breadboard cable Specifications: Dimensions 330 x 210 x 95mm Weight 1120gm

₹23483.35 ₹29354.19 Incl. GST

20%

M5StickC ESP32-PICO Mini IoT …

(0)

M5StickC ESP32-PICO Mini IoT Development Kit M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open-source, IoT development board. This tiny block allows you to easily prototype IoT-based projects in a very short time. M5stick is one of the core devices in the M5Stack product series which is built in a continuously growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open-source code & engineering community that will help you in every step of the developing process. Note: Wearable strap not included with this kit. Package Includes: 1 x M5StickC ESP32-PICO Mini IoT Development Kit 1 x USB Cable Specifications Flash Memory 4 MB Operating Voltage (VDC) 5V Operating Current (A) Operating Current (A) Interface GROVE(I2C+I/0+UART) x 1TypeC x 1 LCD Screen 0.96 inch, 80*160 Colorful TFT LCD, ST7735S Dimensions 5 x 3 x 2cms Weight 50 grams

₹2703.42 ₹3379.27 Incl. GST

20%

M5 Stack ATOM Lite

(0)

M5 Stack ATOM Lite Atom Lite, which has a size of only 24*24mm, is a very compact development board in the M5Stack development kit series. It provides more GPIOs for user customization which is very suitable for embedded smart home devices and in making smart toys. The main control adopts the ESP32-PICO chip which comes integrated with Wi-Fi and Bluetooth technologies and has a 4MB of integrated SPI flash memory. Atom Lite board provides an Infra-Red LED, an RGB LED, buttons, and an HY2.0 interface. In addition, it can connect to external sensors and actuators through 6 GPIOs. The onboard Type-C USB interface enables rapid program upload and execution. Applications: Internet of things terminal controller IoT node Wearable peripherals Package Includes: 1x ATOM Lite Specifications: ESP32 240MHz dual-core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual-mode Bluetooth Flash 4MB Power Input 5V @ 500mA Port TypeC x 1, GROVE(I2C+I/0+UART) x 1 PIN Port G19, G21,G22,G23,G25, G33 RGB LED SK6812 3535 x 1 IR Infrared transmission Button Custom button x 1 Antenna 2.4G 3D Antenna Operating Temperature 0°C to 60°C Dimensions 24 x 24 x 10mm Weight 12gm

₹996.73 ₹1245.91 Incl. GST

20%

M5Stack Core2 ESP32 IoT Devel…

(0)

M5Stack Core2 ESP32 IoT Development Kit M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores.The MCU is an ESP32 model D0WDQ6-V3 and has dual-core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. Wi-Fi and Bluetooth are supported as standard and it includes an onboard 16MB Flash and 8MB PSRAM, USB TYPE-C interface for charging, downloading of programs and serial communication, a 2.0-inch integrated capacitive touch screen, and a built-in vibration motor.M5Core2 also features a built-in RTC module that can provide accurate timing. The power supply is managed by an AXP192 power management chip, which can effectively control the power consumption of the base and built-in green LED power indicator helps to notify the user of battery level. The battery capacity has been upgraded to 390mAh, which can power the core for much longer than the previous model.The M5Core2 retains the TF-card(microSD) slot and speakers. However, in order to ensure higher quality sound output, the I2S digital audio interface power amplifier chip is used to effectively prevent signal distortion. There are independent power and reset buttons on the left side and bottom of the base.The 3 icons on the front of the screen are capacitive buttons that are programmable. There is a small expansion board on the back of the base with a 6-axis IMU sensor and microphone. The development platform and programming language supported by M5Stack Core2: Arduino, UIFlow (using Blockly, MicroPython language) No matter what level of your development and programming skills, M5Stack will help You gradually turn your ideas into reality. Switching Operations: Power on: One-click the power button on the leftPower off: Long press the left power button for 6 secondsReset: Click the RST button on the bottom side Applications: Internet of things terminal controller Stem education product DIY creation Smart home equipment Package Includes: 1 x M5Stack Core21 x Type-C USB(20cm) Specifications: ESP32-D0WDQ6-V3 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth Flash 16MB PSRAM 8MB Input Voltage 5V @ 500mA Interface TypeC x 1, GROVE(I2C+I/0+UART) x 1 IPS LCD Screen 2.0"@320*240 ILI9342C Touch Screen FT6336U Speaker amplifier NS4168 LED Green power indicator light Button The power button, RST button, Virtual screen button*3 Vibration reminder Vibration motor MIC SPM1423 I2S Power Amplifier NS4168 6-axis IMU MPU6886 RTC BM8563 PMU AXP192 USB Chip CP2104/CH9102F (two chip versions, there is no difference in function and use) DC-DC Boost SY7088 TF card slot 16G Max Lithium Battery 390mAh @ 3.7V Antenna 2.4G 3D antenna Operating temperature 0°C to 60°C Base screw specifications Hexagon socket is countersunk head M3 Dimensions 54 x 54 x 16mm Gross Weight 70g

₹5686.04 ₹7107.55 Incl. GST

20%

M5Stack Development Board Wat…

(0)

M5Stack Development Board Watch Kit (Excluding Core) Watch is an M5Core watch set. In addition to being powerful development hardware, the M5Core has a sophisticated look that gives it the possibility to wear smart. The kit is designed for the M5Core series, Compared with the old 3D printing base, the new model uses a mold, which has a qualitative improvement in appearance and quality. in addition to the cool strap. Also equipped with a 650mAh lithium battery, allowing users to have sufficient reliable endurance while using the device. Note: Incompatible with M5Stack Core2 Package Includes: 1x strap base1x 700mAh battery2x telescopic card pin2x M3x15 screws1x HEX KEY1x disassemble screwdriver Specifications: Watch strap 260mm x 22mm Weight 18gm

₹1520.53 ₹1900.66 Incl. GST

20%

M5Stack ESP32 Basic Core IoT …

(0)

M5Stack ESP32 Basic Core IoT Development Kit V2.6 M5Stack BASIC Kit, like its namesake, is a starter kit among the M5Stack development kit series. It’s a modular, stackable, scalable, and portable device that is powered with an ESP-32 core, which makes it open-source, low cost, full-function, and easy for developers to handle new product development on all stages including circuit design, PCB design, software, mold design, and production. This Basic Kit provides a friendly price and full-featured resources which makes it a good starter kit for you to explore IoT.If you want to explore the fastest way of IoT prototyping, the M5Stack development board is the perfect solution. Not like others, the M5Stack development board is highly efficient, covered with industrial-grade case and ESP32-based development board. It integrates with Wi-Fi & Bluetooth modules and contains a dual-core and 16MB of SPI Flash. Together with 30+ M5Stack stackable modules, 40+ extendable units, and different levels of program language, you can create and verify your IoT product in a very short time.Supportive development platforms and programming languages: Arduino, Blockly language with UIFlow, Micropython. Regardless of what level of programming skill you have, M5Stack would guide you in every step of the way to realize your idea as well as to the final productization. e If you ever played with ESP8266, you would realize that ESP32 is a perfect upgrade out of ESP8266. In comparison, ESP32 has more GPIOs, more analog inputs, and two analog outputs, multiple extra peripherals( like a spare UART ). Official developing platform ESP-IDF has transplanted with FreeRTOS. With dual-core and real-time OS, you can get more organized code and a much high-speed processor.M5Stack Basic is consists of two separable parts. The upside part has all kinds of processors, chips, and some other slot components. The bottom part has a lithium battery, M-BUS socket, and extendable pins on both sides. Switching Operation: Power on: Click the red power button on the leftPower off: Quickly double-click the red power button on the leftNote: By default, when USB is powered, it cannot be shut down Applications: Internet of things terminal controller Stem education product DIY creation Smart home equipment Package Includes: 1x BASIC10x Dupont1x Type-C USB(20cm)1x User Manual1x Sticker Specifications: ESP32 240MHz dual-core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual-mode Bluetooth Flash Memory 16MB Power Input 5V @ 500mA Port TypeC x 1, GROVE(I2C+I/0+UART) x 1 Core Bottom Port PIN (G1,G2,G3,G16, G17, G18, G19, G21, G22, G23, G25, G26, G35, G36) IPS Screen 2 inch, 320x240 Colorful TFT LCD, ILI9342C, max brightness 853nit Button Custom button x 3 Speaker 1W-0928 Battery 110mAh @ 3.7V Antenna 2.4G 3D Antenna Operating Temperature 0°C to 60°C Dimensions 54 x 54 x 18mm Weight 93gm

₹4451.22 ₹5564.02 Incl. GST

20%

M5Stack FIRE IoT Development …

(0)

M5Stack FIRE IoT Development Kit (PSRAM) V2.6 M5Stack FIRE It‘ a cost-effective Wi-Fi & Bluetooth dual-mode IoT controller that adopts Espressif ESP32 main control chip, equipped with two low-power Xtensa® 32-bit LX6 microprocessors, with the main frequency of up to 240MHz. With 8M PSRAM + 16M FLASH memory, 2.0-inch full-color HD IPS display panel, IMU, LED, microphone, speaker, TFCard slot, and other peripherals. The full-coverage case ensures circuit stability even in complex industrial applications. The internal offers a wide range of common interface resources (ADC/DAC/I2C/UART/SPI, etc.) which is highly expandable. This functional and powerful IoT controller is very applicable to various product prototyping, industrial control, and smart building applications.High productization: Exquisite designs, Prototyping right into products Product-grade full-coverage cover for more stable circuit operation Low code development: Support UIFlow graphical programming platform, scripting-free, cloud push Fully compatible with Arduino, ESP32-IDF and other mainstream development platforms Support FreeRTOS, with dual-core and multitasking mechanism, it can perform the tasks efficiently, Program optimization. High integration: 2.0-inch IPS display panel, 6-axis IMU, programmable RGB lights x10, microphone, speaker, custom buttons x3 Built-in Li-ion power, integrated power management chip, supports TypeC and POGO PIN Finely tuned RF circuit for stable and reliable wireless communication Strong expandability: GROVE expansion ports x3 (I2C, GPIO, UART) Easy access to M5Stack software and hardware system, stackable module design, plug-and-play sensor expansion Note: GPIO 16 / 17 of FIRE are connected to PSRAM by default, so when you connect or stack other modules, you need to pay attention to avoid conflicts with these two pins to prevent the device from not working properly and generating instability.. Switching operations: Power on: Click the red button on the leftPower off: Quickly double-click the red button on the leftUSB power: By default, It can not be shut down when USB power is on Applications: IoT Controller DIY creator works Smart Home Control Package Includes: 1x M5Stack FIRE1x M5GO Charging Base2x LEGO Building Blocks5x LEGO Connections1x M3 Hex Wrench1x Type-C USB (50cm)1x User's Manual Specifications: ESP32-D0WDQ6-V3 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth Flash 16MB PSRAM 8MB Input power 5V @ 500mA Interface TypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1 Keys Custom Keys x 3 LCD screen 2.0"@320*240 ILI9342C IPS panel, maximum brightness 853nit Speaker 1W-0928 Microphone Analog BSE3729 Microphone IMU 6-axis MPU6886 USB Chip CH9102F LED SK6812 RGB LED x 10 Antenna 2.4G 3D antenna Operating Temperature 0°C to 40°C Dimensions 54mm x 54mm x 30.5mm Weight 162gm

₹6165.48 ₹7706.84 Incl. GST

20%

M5Stack ATOM Matrix

(0)

M5Stack ATOM Matrix ATOM Matrix, which has a size of only 24 * 24mm, is the most compact development board in the M5Stack development kit series. It provides more GPIO pins and is very suitable for handy and miniature embedded device development. The main control adopts the ESP32-PICO-D4 chip, which comes integrated with Wi-Fi and Bluetooth technologies and has 4MB of integrated SPI flash memory. The Atom board provides an Infra-Red LED along with the 5 * 5 RGB LED matrix on the panel, a built-in IMU sensor (MPU6886), and an HY2.0 interface. A general-purpose programmable button is provided below the RGB Led matrix to enable users to add input support to their various projects. The onboard USB interface (Type-C) enables rapid program uploading and execution. One M2 screw hole is provided on the back for mounting the board. Note: When using FastLED lib, the recommended brightness of the RGB LED is 20. Please do not set it to a high brightness value to avoid damage to the LED and acrylic screen. (In ATOM lib, we have mapped its appropriate brightness range to 0~100) Applications: Internet of things terminal controller IoT node Wearable peripherals Package Includes: 1x ATOM Matrix Specifications: ESP32 240MHz dual-core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual-mode Bluetooth Flash 4MB Power Input 5V @ 500mA Port TypeC x 1, GROVE(I2C+I/0+UART) x 1 PIN Port G19, G21,G22,G23,G25, G33 RGB LED WS2812C 2020 x 25 MEMS MPU6886 IR Infrared transmission Button Custom button x 1 Antenna 2.4G 3D Antenna Operating Temperature 0°C to 60°C Dimensions 24 x 24 x 14mm Weight 14gm

₹1616.86 ₹2021.07 Incl. GST

20%

M5Stamp Pico Mate with Pin He…

(0)

M5Stamp Pico Mate with Pin Headers STAMP-PICO features an ultra-compact design with two low-power Xtensa® 32-bit LX6 microprocessors at 240MHz on a PCB are as tiny and delicate as a postage stamp. low power consumption. It is ideal for any space-constrained or battery-powered devices such as wearables, medical devices, sensors, and other IoT devices. Multiform: 5 options of installation, means endless possibilities! (SMT, DIP, flywire, grove interface), with a high-temperature resistant plastic shell, 3D antenna and components can be better protected. Low code development: STAMP-PICO supports UIFlow graphical programming platform, scripting-free, cloud push; and fully compatible with Arduino, MicroPython, ESP32-IDF, and other mainstream development platforms to quickly build various applications. High Integration: STAMP-PICO contains 5V->3.3V DC/DC port, GPIOx12, programmable RGB light x1, button x1, finely tuned RF circuit, providing stable and reliable wireless communication. Stong Expandability: Easy access to M5Stack's hardware and software ecology system: a wealth of sensors, actuators, functional modules, and accessories to choose from, Extremely fast adaptation. Applications: Instrumentation Wi-Fi Remote Monitoring/Control Smart Home Color LED Control Fire/security intelligent integrated management Smart Card Terminal Wireless POS Package Includes: 1 x M5Stamp Pico1 x Heat Resistant Sticker4 x Pin Headers1 x 90° Grove Connector1 x Hex Key Specifications: Master Control Resource ESP32-PICO-D4 Flash 4MB Input Voltage 5V @ 500mA Power consumption Normal standby:5V@29mA, WIFI STA mode: 5V@60mA, Bluetooth mode data sending status: 5V@84mA, Deep-sleep mode: 5V@0.35mA Wireless communication distance AP Mode: 16m, BLE Mode: 110m, Class Bluetooth Mode: 90m UI Programmable physical keys x 1, Programmable RGB LED (SK6812) x 1 Antenna Type 2.4G 3D Antenna Wi-Fi 802.11 b/g/n (up to 150 Mbps for 802.11n), spectrum range: 2.4 GHz ~ 2.5 GHz Bluetooth Bluetooth V4.2 BR/EDR and BLE standard, NZIF receiver, sensitivity up to -97 dBm Module Resource Interface ADC, DAC, touch sensor, SD/SDIO/MMC host controller, SPI, SDIO/SPI slave controller, EMAC, motor PWM, LED PWM, UART, I2C, I2S, IR remote controller, GPIO, pulse counter IO interface x12 G0, G1, G3, G26, G36, G18, G19, G21, G22, G25, G32, G33 IO interface spacing 2.54mm Operating temperature 0°C to 60°C Dimensions 18 x 24 x 4.4mm Weight 5gm

₹639.60 ₹799.50 Incl. GST

M5GO IoT Starter Kit V2.6

To rate this product please login!

Related products

Related products

Universal IOT Experiment Kit …

M5StickC ESP32-PICO Mini IoT …

M5 Stack ATOM Lite

M5Stack Core2 ESP32 IoT Devel…

M5Stack Development Board Wat…

M5Stack ESP32 Basic Core IoT …

M5Stack FIRE IoT Development …

M5Stack ATOM Matrix

M5Stamp Pico Mate with Pin He…

Features

Backgrounds

Full Screen mode

Dark mode

Clear local storage

Contact us

Our Company

Account

Services