3D Printer 2 in 1 J-Head Heat Sink V6 Extruder Double Head Aluminum Block Heatsink for E3d 3D Printer All-metal Cyclops and Chimera Dual Multi-extrusion v5 v6 HotEnd Double nozzle Head. These extrusion block with heatsink can be integrated with any 3D printer giving a user the ability to print in dual color using the same nozzle and dual heating element. This block features full aluminum construction. With dual M5 threaded holes as an inlet for the heating elements and a single M4 threaded hole for the outlet. Package Includes: 1 x 3D Printer 2 in 1 J-Head Heat Sink V6 Extruder Double Head Aluminum Block Heatsink for E3d 3D Printer Specifications: Material Aluminium Dimensions (mm) 32 x 30 x 18 Weight (gm) 12

E3D V6 All Metal J-head with Fan for 1.75 mm filament 0.2 mm Nozzle Extruder for 3D Printers The v6 HotEnd allows you to print a wide variety of materials, from soft and flexible to sturdy and strong. This is possible due to the PTFE (Polytetrafluoroethylene) liner tube through the hotend that you can extend into your extruder – this gives the ability to add the confinement and constraint needed to make excellent quality prints with flexible filaments. This technology opens new doors for your 3D printing aspirations. With High-Temperature Performance, you can print with high-temp materials like Polycarbonate and Nylon – this also eliminates HotEnd meltdown failures that are common with PTFE designs. Even though the v6 has a PTFE liner inside the hotend the liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating. This design is in-tune with all the elements, so your prints will come out crisp and accurate. The v6 has cut back on a bunch of bulk. This clean-cut version’s overall length is only 62mm, and there are significant reductions in the X/Y dimensions by using the new injection molded fan duct. This E3D V6 with Fan Cable 30cm Length for 1.75 mm filament 0.2 mm Nozzle contains the same signature high-temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. This kit contains the old thermistor, heater block, sleeving, and cooling fan with a holder. Package Includes: 1 x V6 Hot End with 0.2mm Nozzle 1 x Blue fan duct(Injection moduled PC) 1 x Fan(12V) 1 x 12V 40W Heater 1 x 100k NTC thermistor Specifications: Filament Diameter (mm) 1.75 Nozzle Diameter (mm) 0.2 Cable Length (cm) 30 Length (mm) 75 Width (mm) 30mm Height (mm) 30mm Weight (gm) 74

V6 Bowden Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament This 3D printer throat nozzle is made of high grade material, which is not easy to break or rust, and also heat-resistant. The 3D printer feeding tube is easy to install, not requiring any special tools. It is designed to break the heat transmission efficiently while in work.This 3D printer piping is lightweight and compact, easy to store and carry in the pocket. This throat pipe is easy to maintain, for its smooth surface and rust-proof material. Package Includes: 1 x V6 Bowden Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament Specifications: Item Type Heatbreak Throat Application E3DV6 Remote Wire Feed Used for 1.75mm Filament Material Stainless Steel

V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament This is a V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.00 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V6 Bowden heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle. Package Includes: 1x V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament Specifications: Material Stainless steel Fit for Filament size 3.00 mm Teflon Tubing  Yes

V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament This is a V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament. This is a heat break compatible with the E3D V6 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.0 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V6 heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle. check out : V6 Bowden Heat Break Hotend Throat With Teflon Tube for 3.00 mm Filament Package Includes: 1x V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament Specifications: Material Stainless steel Fit for Filament size 3.0 mm

V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament This is a V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament. This is a heat break compatible with the E3D V5 hot end for 3mm filament. The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 1.75mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. Package Includes: 1x V5 Heat Break Hotend Throat Without Teflon Tube for 1.75mm Filament Specifications: Material Stainless steel Fit for Filament size 1.75mm Inner diameter 2mm  Length 26.5 mm

V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament This is a V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament. This is a heat break compatible with the E3D V5 hot end for a 3mm filament.  It comes with a PTFE insulation tube on the inside.  The heat break has a shoulder on the top to ensure that the PTFE tube does not move up inside the heat break. These are high-quality stainless steel sleeve tube caps that are ideal for use with 3D printer extruders that use 3.0 mm filament. They can be used for a long time without any issues. This part will eliminate the PTFE liner and give you good, long-lasting performance with PLA. The V5 heat break is used to channel filament through the cooling tower and straight into the heated nozzle. The top end of the heat break inside the cooling tower is designed to stay cold while the bottom end inside the heat block will heat up which in turn will aid in rapidly heating up your filament to the desired temperature in preparation for extrusion through the nozzle. check out : V6 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament Package Includes: 1x V5 Heat Break Hotend Throat With Teflon Tube for 3.0 mm Filament Specifications: Material Stainless steel Fit for Filament size 3.0 mm

Extruder Kit Left Side MK8 Aluminum 3D Printer Block This is a high quality MK8 Extruder Replacement Aluminum Alloy Block. Use it to replace your blocked/damaged extruder. This block comes in a kit form and requires assembly by the user. Since this is a very popular numerous assembly instructions and videos are available on the internet which will help you build your extruder. The MK8 Extruder is available in 3 different types – Right Side, Left Side and Right Short. These extruders differ in the direction in which the filament is extruded with respect to the extruder block. When using single extruders, any extruder can be used. When using dual extruders you can use one right side and one left side extruder as shown in the product image. Also check the Short Handle MK8 Extruder Aluminum Alloy for 3D Printer Block - Right Short. It is designed for use in different types of 3D printers, supporting both bowden and MK8 extrusion. The extruder is compatible with a NEMA 17 stepper motor and aims to reduce wiredrawing issues during remote feeding. Package Includes: 1 x Extruder Kit Left Side MK8 Aluminum 3D Printer Block Specification:  Side Left Material Aluminum alloy Weight (gm) 60

Short Handle MK8 Extruder Aluminum Alloy for 3D Printer Block - Right Short This is a high quality MK8 Extruder Replacement Aluminum Alloy Block. Use it to replace your blocked/damaged extruder. This block comes in a kit form and requires assembly by the user. Since this is a very popular numerous assembly instructions and videos are available on the internet which will help you build your extruder.The MK8 Extruder is available in 3 different types - Right Side, Left Side and Right Short. These extruders differ in the direction in which the filament is extruded with respect to the extruder block. When using single extruders, any extruder can be used. When using dual extruders you can use one right side and one left side extruder as shown in the product image.  Package Includes: 1 x Aluminum block built into frame 1 x Aluminum lever/fulcrum 1 x Idler wheel for 1.75mm filament 1 x Extruder drive gear 1 x High tension spring - Set of Screws Specifications:

MK8 Extruder for 3D printers The MK8 extruder features outstanding quality and ensures better performance for 3D printers. The MK8 extruder is manufactured with a V design which makes it convenient for users to load the filament right to the end of the barrel. This extruder model for 3D printers is equipped with a PTFE tube inside the barrel. This ensures that there is fluent feeding of the filament. It also features a self-lubricating system that avoids any blockage.  Package Includes: 1 x MK8 Extruder for 3D printers Specifications Extruder Model MK8 Material  Aluminium  Shaft Speed 40mm/s Dimensions  5 x 4 x 3cms  Weight  100 grams

PC4-M5 Pneumatic Push in Bowden Extruders for 1.75mm This PC4 M5 Bowden Connector is used in 3D printers with 1.75mm Bowden-style extruder assemblies, to provide a cool, safe, and neat path for the filament to travel. This ensures that it reaches the hotend assembly without any problems, which translates to better quality prints and greater consistency. The connector utilizes a John Guest fitting, which tightens with tension, to ensure that it maintains a firm grip on the tubing. It’s easy to see why this connector is such a popular choice for Bowden-style extruders, as their compatibility and high corrosion resistance make it a valuable investment for 3D Printing. Package Includes: 1 x PC4-M5 Pneumatic Push in Bowden Extruders for 1.75mm Specifications: Model PC4-M5 Outer Diameter (mm) 5 Material Copper Color Brass color Inner Diameter (blue) (mm) 4 Working Pressure(PSI) 0 to 150 Operating Temperature (°C) 0 to 55 Air Tube Connected Nylon and Polyurethane Weight(g) 3

3D INKJET E3D V6 J-head Extruder Kit The 3D extruder is the part of the 3D printer that ejects material in liquid or semi-liquid form in order to deposit it in successive layers within the 3D printing volume. Extruder is considered as one of the important components of a 3D printer. It is the part of the 3D printer responsible for drawing in, melting and pushing out the filament.  check out :  3mm 100g Green ABS Filament Package Includes: 1 x 3D Extruder 1 x 12V Cooling Fan Teflo Tube 3D Inkjet V6 Extruder Kit Specifications Nozzle  0.4mm Filament  1.75mm Filament Voltage  12V Dimensions  6 x 5 x 4cms  Weight 100 grams

PC6-01 Pneumatic Push in Bowden Extruders for 3.0mm J-Head fitting The PC6-01 Pneumatic Push in Bowden Extruder for 3 mm J-Head fitting is a small part that connects the PTFE tubing to 1.75 mm Filament extruder assemblies on 3D Printers. It is compatible with the standard up to 3 mm ID PTFE Tubing, with a thread that universally fits M10 extruder fittings. This PC6-01 Bowden Connector is used in 3D printers with 1.75 mm Bowden-style extruder assemblies, to provide a cool, safe, and neat path for the filament to travel. This ensures that it reaches the hotend assembly without any problems, which translates to better quality prints and greater consistency. The connector utilizes a John Guest fitting, which tightens with tension, to ensure that it maintains a firm grip on the tubing. It’s easy to see why this connector is such a popular choice for Bowden-style extruders, as their compatibility and high corrosion resistance make it a valuable investment for 3D printing. Package Includes: 1 x PC6-01 Pneumatic Push in Bowden Extruders for 3.0mm J-Head fitting Specifications: Model No. PC6-01 Inside Diameter 6mm Thread Size M6 Weight 20

Extruder Kit Right Side Upgraded Red MK8 All Metal Bowden for 1.75mm Filament Enhanced 3D Printer Extruder Replacement Kit - Suitable for Ender-3 PRO,Tornado,CR-10,CR-10S. Easy to install, unscrew the old original plastic extruder and screw in the new metal extruder and ready to print. Dual-gear extrusion mechanism, high extrusion force for uniform feed. Made of aluminum alloy, full metal, high quality and durable, able to enhance the performance of the original printer. Advantages of Metal Extruder: The metal extruder has better pressure and can be pushed into the printer nozzle to improve the performance of the printer. Our extruder kit has an adjustable screw that allows you to adjust the pressure of the extruder gearbox as needed. All-metal aluminum alloy, kit and must be assembled. The metal material extruder set is more stable and durable during operation than the original plastic extruder set. DIY kit and you need to assemble by yourself. A stepper motor is characterized by converting a series of input pulses into precisely defined increments of the shaft position.This is a high quality motor that can be used for long periods of time without getting stuck. Package Includes: 1 x Extruder Kit Right Side Upgraded Red MK8 All Metal Bowden for 1.75mm Filament Specifications: Item type Extruder Material Aluminum alloy Suitable for  CR-10, For CR-10S, For Ender-3, For Ender-3 PRO. Size (mm) 42x42 mm

Volcano hot end Heater Block/Heating Block for 3D Printer This is the specialised heater block for Volcano upgrade pack. Compatible with all Volcano Nozzles and all HotEnds except Cyclops. This block uses the same clamped thermistor mounting configuration as the E3D-v6 Heater Block for maximum ease of use and security. The block also has a heater cartridge clamping system for maximum heat transfer, this time using two screws for clamping instead of the one in E3D-v6. This block absolutely cannot be used with a non Volcano nozzle, plastic will go everywhere, please don't try. Volcano uses the same thermistor, Heater Cartridge, fixings methods and procedures as E3D-v6 hotends . As such assembly of Volcano is essentially identical to that of the standard E3D-v6 block, the only notable difference is that there are two heater clamping screws, and the heater wires should exit through the top of the block. Package Includes: 1 x Volcano hot end Heater Block/Heating Block for 3D Printer Specifications: Material Aluminum Alloy Threaded Tube Hole M6 Heater Mounting Hole (mm) 6 Dimensions 20mm x 20mm x 11.6mm