WS2812 64-Bit RGB LED Matrix Panel This is a high-quality 8x8 RGB LED Dot Matrix Panel. The WS2812 64-bit LED Matrix provides bright, colorful lighting with 256 brightness levels per pixel. It's great for e-textiles, games, and animations. The flexible design lets it fit on curved surfaces easily. It works on a low 5V power supply, making it energy-efficient. This LED matrix display is compatible with Raspberry Pi, Arduino, and ESP32. With two simple 3-pin connectors, it’s easy to connect to Arduino or microcontrollers. Perfect for makers and DIYers, this LED dot matrix display adds amazing visuals and long-lasting performance to your projects.

WS2812 8 Bit RGB LED (round) The control circuit and the LED share the only power source. The control circuit and RGB chip are integrated into a package of 5050 components, form a complete control of pixel point. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate. Package Includes: 1 x WS2812 8 Bit RGB LED (round) Specifications Data transmission 800Kbps Refresh rate 30 frames/sec Outer Diameter 32mm Inner Diameter 18mm Weight  5 grams

WS2812 16 Bit RGB LED Matrix You can create animations, and games, or even incorporate them into a fun e-textiles project. On top of all that, thanks to its flexible backing, this LED Matrix can be bent and bowed to fit onto almost any curvy surface. These panels require a 5V low voltage input for power which needs to be able to source a good amount of current. Each LED is capable of drawing as much as 60mA (at peak brightness the matrix can draw just over 3.5 Amps at 5 Volts), this adds up so it is suggested to use a 5V 2A power supply. There are two 3-pin connection ports to the wiring board. Solder wires to the input port and provide 5VDC to the +5V and ground pins, then connect the DIN pin to your microcontroller and make a common ground from the 5V power supply to the microcontroller/Arduino. Package Includes: 1 x WS2812 16 Bit RGB LED Matrix Specifications Model  WS2812 Bit  16 Board Colour  Black  Dimensions  3×3 cm Data Transmission Speed  800 kbps Rate of Refresh  30 feet per second Weight  15 grams

WS2812 8 Bit RGB LED WS2812 8-Bit RGB LED Straight is an exceptional product for those seeking advanced lighting in their projects. This top quality ws2812 led module provides superior illumination with long lasting, bright and vivid colors that will instantly improve the ambience of any environment. From its high performance LEDs to customizable settings via microcontroller programming, the WS2812 offers unparalleled brightness levels while consuming minimal power. It utilizes a built-in control circuit composed using both low voltage differential signalling (LVDS) technology and Pulse Width Modulation (PWM). With this configuration, every colour can be customized or adjusted allowing you to create your desired atmosphere quickly without having to worry about additional components such as resistors or external controllers. This ws2812 led comes equipped with several connection pins which allow it to easily integrate into existing systems already utilizing 5V DC logic circuits including various Arduino boards, Raspberry Pis and other maker platforms alike. Package Includes: 1 x 8 Bit WS2812 Development Board Black Specifications Model WS2812 Bit  8 Bit  LED RGB LED Dimensions  53mm x 10mm x 1mm  Weight  5 grams

WS2812 12 Bit RGB LED (round) The WS2812 12-bit RGB LED is a great way to add color to your Arduino projects. You can use it to create cool lighting effects, or add it to your existing project to add a splash of color. The WS2812 LED Strip is very easy to use, and its price is very reasonable.  The WS2812 RGB LED Ring light is can be easily used with Arduino Uno microcontroller. WS2812 5050 RGB 12-LED Round Lamp Development Board - Black Round and round and round they go! 12 ultra bright smart LED NeoPixels are arranged in a circle with (50mm) outer diameter. The rings are "chainable" - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together. Each LED is addressable as the driver chip is inside the LED. check out : WS2812 8 Bit RGB LED (straight) Package Includes: 1 x WS2812 12 Bit RGB LED (round) Specifications: Model  WS2812 RGB LED Bit  12 Outer Diameter 50mm Weight  15 grams Inner Diameter 35mm Height  3mm

24V RGB 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof 24V RGB 5050 SMD LED Strip with 1Meter length has 300 Bright, RGB LEDs on the single strip!  The strip is comprised of 5050 Sized SMD RGB LEDs and draws a total of 22.5 Watts of Power. This RGB 5050 SMD LED Strip strip is flexible and can be bent to conform to curves and corners. Runs from 24VDC. (Power supply and controller not included) You need a minimum output 2 AMPs Adapter to power this full 1 Meter strip. Using an underpowered power supply on these strips will result in power loss down the line and mismatched colors due to a certain color of diodes not receiving enough power. These strips are a bit different because, though they have the same number of LED modules (300) in another Cold white or Warm White roll, they actually have three times the light-emitting diodes as a regular LED strips. This is because each of the 300 modules on the strip each contains three colors. A red, a blue and a green LED. This means that, when set to white, at full brightness, the RGB strips use almost three times the power as the regular white strips. A 1 Meter roll of RGB LEDs uses roughly 2.8 Amps at 24VDC. So connecting three of these strips, end-to-end would result in roughly an 8.4 Amp requirement. With this you can create different ambience at the comfort of your hands just by switching lights on and the designer sequence of lights that are already preset. These lights can be used as decorative pieces around the house especially during festive occasions, office buildings, walls etc. or for any functions to brighten the occasion. read more : NEOPIXEL WORKING AND DEMO Note: These are NOT individually addressable LED strips. Each color has its own separate 24VDC circuit. For a total of three 24VDC circuits (R G B). You can power these strips off of regular 24V DC if you don’t need advanced flashing patterns or color mixing. Application: Ideal for decoration of building outlines, landscape illumination, amusement themes. Holiday light sculpture, decorative figure, active signs, displays, shop windows Storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway. Package Includes: 1 x 24V RGB 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof Specifications: LED Glow Color RGB Operating Voltage 24V DC Operating Current 2A Total Luminous Flux 18-20LM View angle 120 ° ~ 140 ° Power required 8-10W/meter Strip Width 10 mm Strip Length 1 Meter No. of LEDs 60LED/Meter Protection Level IP20 (No Waterproof) Working Temperature -20 °C to 50 °C Weight(gm) 10

RGB Led Module for boards compatible with Arduino RGB LED module consists of a full-color LED made by R, G, B three-pin PWM voltage input can be adjusted. Primary colors (red/blue/green) strength in order to achieve a full-color mixing effect. Control of the module with the Arduino can be achieved with Cool lighting effects. The RGB Full Color LED SMD Module consists of a 5050 SMD LED, used with limiting resistors to prevent burnout and jumper wires for the connection. You can use breadboard for mounting. This RGB LED is compatible with popular electronics platforms like Arduino, Raspberry Pi, and ESP8266. Connection Diagram: Package Includes: 1 x RGB LED module Specifications: Compatible Arduino, Raspberry Pi, and ESP8266 Dimensions  1 x 1 x 1cms  Weight  5 grams

24V Warm White 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof This Bright 5050 SMD LED, has high intensity and reliability. It has a significantly longer life span of around 50,000 hours than ordinary LED strips available in the market and therefore it can be used for application where long-life performance required. This 5 meter LED strip with around 300 LEDs on strip operates at 24V at 2A DC supply. The Strip has soldered endpoint from both ends to connect strip conveniently. The flexible ribbon is very easy for curving around bends and for completely smooth and even light spread, solving the uneven luminous problem. This LED strip has the advantage of Ultra-bright but running at low-temperature low power consumption. The strip comes with 5M self-adhesive to easy install.  With this you can create different ambience at the comfort of your hands just by switching lights on and the designer sequence of lights that are already preset. These lights can be used as decorative pieces around the house especially during festive occasions, office buildings, walls etc. or for any functions to brighten the occasion. Application: Ideal for decoration of building outlines, landscape illumination, amusement themes. Holiday light sculpture, decorative figure, active signs, displays, shop windows Storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway. Package Includes: 1 x 24V Warm White 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof Specifications: LED Glow Color Warm White Operating Voltage 24V DC Operating Current 2A Total Luminous Flux 18-20LM View angle 120 ° ~ 140 ° Power required 8-10W/meter Strip Width 10 mm Strip Length 1 Meter No. of LEDs 60LED/Meter Protection Level IP20 (No Waterproof) Working Temperature -20 °C to 50 °C Weight(gm) 10

10 Segments 4 Colors Stripe Digital Bar Graph Display This is a 10 Segments 4 Colors Stripe Digital Tubes 2R3Y4G1B Cathode（BAS). Make a small linear display with a glowing 4  color using this elegant LED bar graph only 1″ long. 10 LEDs are contained in the plastic body. This display is bright, beautiful, and funky with nice diffused rectangular lenses for a striking look. There are 20 pins, 10 on each side, with 0.1″ spacing so you can easily plug it into a breadboard with plenty of space for wiring left over. Package Includes: 1 x 10 Segments 4 Colors Stripe Digital Bar Graph Display Specifications: No. of Pins  20 No. of Segments 10 Spacing 0.1″

12V Cold White 5050 SMD LED Strip Flexible 5M/Roll Non-Waterproof (5 Meter) This Bright 5050 SMD LED, has high intensity and reliability. It has a significantly longer life span of around 50,000 hours than ordinary LED strips available in the market and therefore it can be used for application where long-life performance required. This 5 meter LED strip with around 300 LEDs on strip operates at 12V at 2A DC supply. The Strip has soldered endpoint from both ends to connect strip conveniently. The flexible ribbon is very easy for curving around bends and for completely smooth and even light spread, solving the uneven luminous problem. This LED strip has the advantage of Ultra-bright but running at low-temperature low power consumption. The strip comes with 5M self-adhesive to easy install.  With this you can create different ambience at the comfort of your hands just by switching lights on and the designer sequence of lights that are already preset. These lights can be used as decorative pieces around the house especially during festive occasions, office buildings, walls etc. or for any functions to brighten the occasion. Application: Ideal for decoration of building outlines, landscape illumination, amusement themes. Holiday light sculpture, decorative figure, active signs, displays, shop windows Storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway. Package Includes: 1 x 12V Cold White 5050 SMD LED Strip Flexible 5M/Roll Non-Waterproof (5 Meter) Specifications: LED Glow Color Cold White Operating Voltage 12V DC Operating Current 2A Total Luminous Flux 18-20LM View angle 120 ° ~ 140 ° Power required 8-10W/meter Strip Width 10 mm Strip Length 5 Meter No. of LEDs 60LED/Meter Protection Level IP20 (No Waterproof) Working Temperature -20 °C to 50 °C Weight(gm) 50

12V Cold White 5050 SMD LED Strip Flexible 5M/Roll Non-Waterproof (5 Meter) This Bright 5050 SMD LED, has high intensity and reliability. It has a significantly longer life span of around 50,000 hours than ordinary LED strips available in the market and therefore it can be used for application where long-life performance required. This 5 meter LED strip with around 300 LEDs on strip operates at 12V at 2A DC supply. The Strip has soldered endpoint from both ends to connect strip conveniently. The flexible ribbon is very easy for curving around bends and for completely smooth and even light spread, solving the uneven luminous problem. This LED strip has the advantage of Ultra-bright but running at low-temperature low power consumption. The strip comes with 5M self-adhesive to easy install.  With this you can create different ambience at the comfort of your hands just by switching lights on and the designer sequence of lights that are already preset. These lights can be used as decorative pieces around the house especially during festive occasions, office buildings, walls etc. or for any functions to brighten the occasion. Application: Ideal for decoration of building outlines, landscape illumination, amusement themes. Holiday light sculpture, decorative figure, active signs, displays, shop windows Storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway. Package Includes: 1 x 12V Cold White 5050 SMD LED Strip Flexible 5M/Roll Non-Waterproof (5 Meter) Specifications: LED Glow Color Cold White Operating Voltage 12V DC Operating Current 2A Total Luminous Flux 18-20LM View angle 120 ° ~ 140 ° Power required 8-10W/meter Strip Width 10 mm Strip Length 5 Meter No. of LEDs 60LED/Meter Protection Level IP20 (No Waterproof) Working Temperature -20 °C to 50 °C Weight(gm) 50

10 Bit WS2812 5050 RGB LED (Pack of 5) Built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. Trichromatic color of each pixel can realize 256 highlighted, complete 16777216 colors of all true color display, the scanning frequency is not less than 400Hz/s. When the refresh rate is 30fps, cascade number are not less than1024 points. Send data at speeds of 800Kbps. The color of the light were highly consistent, cost-effective.. Package Includes: 5 x 10 Bit WS2812 5050 RGB LED Specifications: Model  10 Bit WS2812 5050 RGB LED Dimensions  5 x 4 x 3cms  Weight  5 grams

10 Bit WS2812 5050 RGB LED Built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. Trichromatic color of each pixel can realize 256 highlighted, complete 16777216 colors of all true color display, the scanning frequency is not less than 400Hz/s. Package Includes: 1 x 10 Bit WS2812 5050 RGB LED Specifications: Model  10 Bit WS2812 5050 RGB LED Dimensions  5 x 4 x 3cms  Weight  5 grams

WS2812 16 Bit RGB LED (round) The WS2812 is a 16-bit RGB LED that combines a full-color RGB LED and a control circuit into one device. The LED has a 5050 package, making it small and compact, and it is frequently used in LED lighting projects and other applications that require programmable colour control. Each LED has three color channels (red, green, and blue) and can produce a wide range of colors by adjusting the brightness of each channel. The LED is controlled by a single data pin, which allows for daisy-chaining multiple LEDs together to form a chain. This makes it easy to control large arrays of LEDs with a single microcontroller or microprocessor. It is compatible with a variety of microcontroller like Arduino, Raspberry Pi, and others. It supports the popular NeoPixel library, which provides an easy-to-use interface for controlling the LED. The LED operates over a wide voltage range of 4V to 5.5V and consumes low amount of power. Package Includes: 1 x WS2812 16 Bit RGB LED (round) Specifications: IC Chip  WS2812B Input Supply Voltage (VDC) 5V Outer Diameter  68mm Inner Diameter  54mm Weight  25 grams

12V Warm White 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof This Bright 5050 SMD LED, has high intensity and reliability. It has a significantly longer life span of around 50,000 hours than ordinary LED strips available in the market and therefore it can be used for application where long-life performance required. This 5 meter LED strip with around 300 LEDs on strip operates at 12V at 2A DC supply. The Strip has soldered endpoint from both ends to connect strip conveniently. The flexible ribbon is very easy for curving around bends and for completely smooth and even light spread, solving the uneven luminous problem. This LED strip has the advantage of Ultra-bright but running at low-temperature low power consumption. The strip comes with 5M self-adhesive to easy install.  With this you can create different ambience at the comfort of your hands just by switching lights on and the designer sequence of lights that are already preset. These lights can be used as decorative pieces around the house especially during festive occasions, office buildings, walls etc. or for any functions to brighten the occasion. Application: Ideal for decoration of building outlines, landscape illumination, amusement themes. Holiday light sculpture, decorative figure, active signs, displays, shop windows Storefronts, bar, nightclub, street, sidewalk, deck, park, porch, staircase, railing, ceiling, or driveway. Package Includes: 1 x 12V Warm White 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof Specifications: LED Glow Color Warm White Operating Voltage 12V DC Operating Current 2A Total Luminous Flux 18-20LM View angle 120 ° ~ 140 ° Power required 8-10W/meter Strip Width 10 mm Strip Length 5 Meter No. of LEDs 60LED/Meter Protection Level IP20 (No Waterproof) Working Temperature -20 °C to 50 °C Weight(gm) 50