Kento G 12V 1A Adapter - DC jack 12 Volt 1 Amp Power Adapter takes an AC INPUT of 100-270V and gives 12V 1A DC output. This power adapter is suitable for powering a wide range of applications including CCTV cameras, wireless routers, Robotics, and DIY kits. Package Includes: 1 x Kento G 12V 1A Adapter - DC jack Specifications: Input 100-270V AC 50/60Hz Output 12Volts 1Amp Output Type DC Dimension 83 x 53 x 60mm Weight 200gm

12V 1A Power Adapter 12 Volt DC 1 Amp power supply is suitable for powering a wide range of applications including CCTV cameras, wireless routers, Robotics and DIY kits. Automatic overvoltage cut-off, over current cut-off, over-temperature cut-off, short circuit cut-off. We focus on producing premium quality and safe power adapters. No noise, no spontaneous combustion, no explosion, no fire hazard, safe to use. Low energy consumption, High Efficiency, Incredibly Low Fault Rates, No Minimum Load. Can be used with AC-DC Converters, GPS, Gaming Consoles, Musical Instruments, Printer, Modem, Router, Billing Machines, Ticketing Machines And Electronics Devices Musical Instruments, Printer, Modem, Router, Billing Machines, Ticketing Machine. Package Includes: 1 x 12V 1A Power Adapter Specifications Input AC 100-240V Output 12 Volts 1 Amp Pin Size  DC Pin Standard Size Dimensions  5 x 4 x 3cms  Weight  50 grams

Hi-Link 3.3V 1.5A Power Module The 5W ultra-small series module power supply is a small-volume, high-efficiency AC -DC power module supply designed by Shenzhen Hi-Link Electronics Co., Ltd. It has the advantages of global input voltage range, low-temperature rise, low power consumption, high efficiency, high reliability, and high safety isolation. It has been widely used in smart homes, automation control, communications equipment, instrumentation, and other industries.

Owon P4305 30V 5A Programmable DC Power Supply Owon P4305 1CH 0 - 30V / 0 - 5A 150W DC Power Supply The NEW Owon P4305 programmable linear lab power supply has a high resolution of 1 mV and one mA, and a low ripple of 1 mV. This lab power supply has a clear four-digit LED display to show the current and voltage and is equipped with automatic active cooling. Furthermore, it has protection against overload, short circuit and overheating. The P4305 is programmable via SCPI and LabVIEW on the PC and it has an RS232 connection. check out : OWON SPE6103 60V 10A Programmable Lab DC Power Supply Package Includes: 1 x Owon P4305 30V 5A Programmable DC Power Supply Specifications: Model P4305  Channel Single Channel Output Total Output Power 150W Channel Output 0 - 30V / 0 - 5A × 1-CH Display  3.7 inch color LCD display Dimension 117mm(L) × 194mm(H)× 295mm(D) Weight Approx. 5.6 kg Interface RS232

5V 2Amp Single Jack Adapter This 5V 2Amp Single Jack Adapter is a high-quality, reliable power supply that can be used to power a variety of devices, including single-board computers, LCD screens, sensors, alarms, and any other 5V digital circuits. The adapter features a standard DC output jack that can be easily connected to the power jack on your device. It is also equipped with a 2A output current, which means that it can provide enough power for even the most demanding devices. The adapter is made from high-quality materials and is built to last, so you can be sure that it is safe to use and you can be confident that you are making a wise investment.

Hi-Link 12V 5W Power Module HLK-5M05 12V/5W Switch Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 12V DC from  120V AC – to 230V AC and has a power rating of 5 Watt. This makes it perfect for small projects that need a 12 volt supply from mains. This power supply module replaces lots of parts from the traditional power supply like diodes, voltage regulators, and transformers. Therefore there are many advantages for these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation, etc. This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in the voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. It is widely used in a smart home, automation and control, communication equipment, instrumentation, and other industries. Environmental conditions: Technical indicators: Single bit Working temperature: – 20-60 +degree Storage temperature: + 80-40 -degree Relative humidity: 5-95% The cooling way: Natural cooling The atmospheric pressure: 80-106Kpa The altitude: 2000M or less. Package Includes: 1 x Hi-Link 12V 5W Power Module Specifications: Brand Hi-Link Rated Input Voltage 100-240 VAC Input Voltage Range 90-264 VAC Maximum Input Current 0.42 A Input Inrush Current < = 10A Long-term Reliability MTBF> = 100, 000 h Operating Temperature -20 to +60°C Storage Temperature -40 ~ 80 C Dimensions 80x50x30mm Weight 60gm

OWON SPE6103 60V 10A Programmable Lab DC Power Supply  The Owon SPE6103 is a very compact single channel DC benchtop power supply with all the regular features such as over voltage (OVP) and over current protection (OCP). It has a high resolution at 10mV/1mA. The display is a high resolution 2.8" LCD which displays set, limit and momentary parameters. The SPE 6103 allows you to monitor the voltage and current in real-time, using graphs on the display. You can store and edit up to 4 groups of output waveforms. The power supply can be hooked up to a host PC with USB and communicate via SCPI. It makes for a great, simple, slim form factor power supply with plenty of power for beginners. The following steps check basic current functions with a short across the power supply's output:  Connect a short across (+) and (-) output terminals with an insulated test lead on this channel. Use a wire size sufficient to handle the maximum current. Set the output voltage to the maximum rating on this channel. Turn on the channel output. Ensure the channel you used is in Constant Current output mode. Set some different current values on this channel; check if the actual current value displayed is close to the set current value, and to check if the actual voltage value displayed is nearly zero. Check that if the output current can be adjusted from zero to the maximum rating, When it is set to the maximum or minimum, a beep is heard, indicating that the limit has been reached. Turn off the channel output and remove the short circuit from the output terminals. Package Includes: 1 x OWON SPE6103 60V 10A Programmable Lab DC Power Supply Specifications: Model SPE6103 Channel 1 Output Resolution 10mV/1mA Output Range 60V/10A Output Power 300W Voltage 0 - 60V Current 10A Load Regulation Voltage ≤30mV Load Regulation Current ≤20mA

Hi-Link HLK-2M05 5V 0.4A Switch Power Supply Module HLK-2M05 Hi-link 5V 2W AC to DC Power Supply Module is plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from  120V AC – 230V AC and has a power rating of 2 Watt. This makes it perfect for small projects that need a 5 volt supply from mains. This power supply module replaces lots of parts from the traditional power supply like diodes, voltage regulator and transformers. Therefore there are many advantages for these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation etc. This AC-DC Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. It is widely used in a smart home, automation and control, communication equipment, instrumentation and other industries. Also check the KBPC3510W rectifier bridge. It is a bridge rectifier that converts AC to DC. It has an input voltage of 1000V and an output voltage of 1000V. It also has a maximum current rating of 35A. Package Includes: 1 x Hi-Link HLK-2M05 5V 0.4A Switch Power Supply Module Specifications: Rated Input voltage (VAc) 90 ~ 245 Maximum input current (A) ≤0.2 Input current surge (A) ≤10 maximum input voltage(VAc) 270 Input Low Voltage Efficiency (%) Vin=110VAc，Output full-load≥69 Input High Voltage Efficiency (%) Vin=220VAc, output full-load≥70 Load rated output voltage (VDC) 5 Short-term maximum output current (mA) ≥500 Voltage Regulation ±0.2% Dimensions (mm) 30 x 17 x 19 Weight (gm) 17

Hi-Link 5V 1A Power Converter Module Hi-Link (HLK-5M05) is a 5W power supply module that converts Ac to DC. It features low current and wide input voltage range. Hi Link Power supply modules are used to convert AC power into usable DC power so that the system to be powered may operate properly. This power converter provides electrical protection in the form of fuses or breakers, may display alarms in the case of abnormal operation and provide a mean to connect the DC output via properly chosen connectors.  Applications: It is widely used in smart home automation Control light bulbs switching communication equipment instrumentation and other industries. Package Includes: 1 x HI-LINK 5V 1A Power Converter Module Specifications Brand  Hi-Link  Model 5V 1A Power Converter Module  Dimensions  3 x 2 x 1cms  Weight  5 grams

Hi-Link 5V 1A Power Converter Hi-Link (HLK-5M05) is a 5W power supply module. It features low current and wide input voltage range. The Hi-Link AC-DC power converter is a plastic enclosed PCB mounted isolated switching step-down power supply module. It is widely used in a smart home, automation and control, communication equipment, instrumentation and other industries.  The Hi-Link Power converter is designed to meet the necessities of EMC and safety test along with which it provides high efficiency and high power density. It works with low ripple and minimal noise and protects the circuit from output overload and short circuit. Package Includes: 1 x HI-LINK 5V 1A AC-DC Power Converter Module Specifications Brand  Hi-Link  Model 5V 0.6A Power Converter Module  Dimensions  3 x 2 x 1cms  Weight  5 grams

Hi-Link 5V 0.6A Power Converter Hi-Link 5V ).6A AC-DC power converter is a 3W power supply module. It features low current and wide input voltage range. The Hi-Link AC-DC power converter is a plastic enclosed PCB mounted isolated switching step-down power supply module. It is widely used in a smart home, automation and control, communication equipment, instrumentation and other industries.  The Hi-Link Power converter is designed to meet the necessities of EMC and safety test along with which it provides high efficiency and high power density. It works with low ripple and minimal noise and protects the circuit from output overload and short circuit. Package Includes: 1 x HI-LINK 5V 0.6A AC-DC Power Converter Module Specifications Brand  Hi-Link  Model 5V 0.6A Power Converter Module  Dimensions  3 x 2 x 1cms  Weight  5 grams

Kento G 12V 2A Adapter - DC Jack 12 Volt 2 Amp Power Adapter takes an AC INPUT of 100-240V and gives 12V 1A DC output. This power adapter is suitable for powering a wide range of applications including CCTV cameras, wireless routers, Robotics, and DIY kits. It has built-in safeguards to protect against overheating, overload, over-charging, short-circuit provide ultimate protection for you and your devices. If you have a power supply for reference, their output voltage, plug size, polarity should be the same .If our Power supply current is equal to or higher than original one’s, then our PS will work with your device. Note: Please check the Device Voltage, Device Current & Jack Size before buying. Applications: CCTV Cameras Speakers Electronic Organs (Casio) DC Fans Printers Computers LED Lights Routers Package Includes: 1 x Kento G 12V 2A Adapter - DC Jack Specifications: Input 100-240 VAC 50/60Hz Output 12Volts 2Amp Output Type DC Dimension 50 x 40 x 30mm Weight 200gm

0.9V-5V to 5V DC-DC USB Step Up Power Boost Converter Module The USB converter modules produce an output of 5V and feature an LED indicator. It can be used in various applications like mobile phone, pad, GPS, automobile data recorder and Bluetooth device. Step-up Module with 0.9-5V input, output 5V for many digital devices, so this is really a great module for designing a portable charger. Useful for your USB charger projects and onboard USB device supply solutions. (ie GoPro cameras) You can supply it with single-cell LiPO or an AA size battery or others. Two AA batteries can output a current of 500 ~ 600MA, a single AA battery power supply can output 200ma current supply, great for mobile phones camera, single-chip, and digital products supply. check out : 0.9V-5V to 5V 600MA USB Output charger step up Mini DC-DC Boost Converter Applications: USB voltage regulator for USB-powered device. This module will bring the USB voltage required for your application at regulated 5V output. Various USB devices need 5V from low voltage batteries. Charge mobile phone/MP4/MP3 from AA battery when traveling Package Includes: 1 x USB step-up boost module. Specifications: Input 0. 9V 5v Output 5V Dimensions  39Mm x 15mm Weight 5 grams

Micro USB Breakout Board Power Charging Module The MCU-Micro USB Breadboard 5V Power Supply Module with a 5-pin female connector B type PCB converter is an excellent tool for connecting USB signals to your microcontroller boards. It also serves as a useful resource if you require access to 5V USB power for your prototype circuits, including breadboards, perforated boards, or Vero boards. Pinout VCC: 5V Power Supply D- : USB D- Signal D+: USB D+ Signal ID: USB Identifier Signal for OTG Devices GND: Power Ground Package Includes: 1 x Micro USB Breakout Board Specifications Board Type  Micro USB Break Out Board Used with  Boards compatible with Arduino  Dimensions  3 x 2 x 1cms  Weight 5 grams

KBPC3510W Rectifier Bridge To Convert Ac Into Dc  A Bridge rectifier is an Alternating Current (AC) to Direct Current (DC) converter that rectifies mains AC input to DC output. Bridge Rectifiers are widely used in power supplies that provide the necessary DC voltage for electronic components or devices. Application: Switch power supply Adapter Industrial equipment Package includes: 1 x KBPC3510W Rectifier Bridge To Convert Ac Into Dc Specifications: Mounting Type Through Hole Pin Count 4 Maximum Operating Temperature +150 °C output voltage Dc1000v   Minimum Operating Temperature -55 °C Average anode current 35A Input voltage Ac1000v Weight 20g