DS3231 RTC Module (Real Time Clock) DS3231 Mini RTC is a Mini Real-Time Clock module designs for Raspberry Pi, but it also can be used to Arduino. DS3231 RTC IC Self-adjust 3.3V and 5V.Provide battery backup for continuous timing, Low-power consumption. Complete clock functions include seconds, minutes, hours, day, date, month and year timing, and provide valid to 2100. It has Two calendar alarms, 1Hz, and 32.768kHz output. Reset output and input buttons Debounced High-speed (400KHz) I2C serial bus. Many RTC modules are meant to operate at 5V. Unfortunately, the Raspberry Pi operates at 3.3V, that is where this handy module comes into play, it operates at 3.3V perfect for adding an RTC to your Raspberry Pi. check out : Programmable Digital Timer Module Note: This board can be used with Arduino board Module itself can adapt 3.3V and 5V systems without level conversion. Applications Servers Data Loggers GPS Modules Power Meters Package includes: 1 x DS3231 RTC Module (Real Time Clock) Specifications: Output. 1Hz and 32.768kHz High-Speed 400kHz Supply Voltage +2.3 V to +5.5 V Operating Temperature Range. -40°C to +85°C temperature range -40 ° C to +85 ° C timing accuracy ± 5ppm (± 0.432 sec/day) Dimensions 14x14x12 mm Weight 25g

Raspberry Pi GPIO Multi-function Expansion Board This Raspberry Pi GPIO Expansion Board is multi-function GPIO expansion board for Raspberry Pi 4B, Raspberry Pi 3B, Raspberry Pi 3B+.  It is easy to use and connect to your RPI board. Each pin is labeled for easy identification. Sensors, switch and any component that you want to interface with the Raspberry pi can be connected. It also has screw terminals for hard and heavy-duty applications working in a real-world environment. Features It is a Multifunctional GPIO Board. The pins and connectors can be easily connected using jumper wires. It is compatible with Raspberry Pi 3B, 3B+ and 4B.  It includes all mounting hardware needed to fix the board to your Raspberry Pi. 4 along with a set of jumpers headers so you can extend your signals out to the edge connectors. Package Includes: 1 x Raspberry Pi GPIO Expansion Board Specifications Board Type  Multifunctional GPIO Board  Compatibility Raspberry Pi 3B, 3B+ and 4B Dimensions  5 x 4 x 3cms  Weight  15 grams

Raspberry Pi RP2040 Microcontroller IC Chip RP2040 is a microcontroller with large on-chip memory, a symmetric dual-core processor complex, and a deterministic bus fabric, all augmented by a unique Programmable I/O (PIO) subsystem that provides unparalleled power and flexibility for professional users. The RP2040 IC's Flexible I/O features enable it to connect to nearly any external device and interface with the physical world. The chip's excellent performance capabilities make integer workloads quick to complete. The RP2040 chip is designed to help users fully utilize its potential. With six independent banks of RAM and a fully connected switch at the heart of its bus fabric, users can arrange for the cores and DMA engines to run in parallel without contention. This represents Raspberry Pi's dedication to low-cost, high-performance computing in a compact, powerful 7 mm x 7 mm package, with just two square millimeters of 40 nm silicon. It delivers high performance, low dynamic power consumption, and low leakage. Also supports various low-power modes.   Read about RP2040 on the Official Page of Raspberry Pi Click Here Note: Iotcart is the authorized seller of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai, or Pune, you can get RP2040 IC in the comfort of your home. Key

3 in 1 Black Aluminum Heat Sink for Raspberry Pi 4B The Aluminium Heat sink for Raspberry Pi 4 is an aluminum heat sink kit that is used for cooling the chip microprocessor. The heat sink is attached with thermally conductive adhesive tape that helps in efficiently cooling the Raspberry Pi. This Raspberry Pi heat sink kit's design aims to enhance the surface area that comes into contact with the air or other cooling medium. A heat sink is used to transmit thermal energy from a high-temperature device to a low-temperature fluid medium. The fluid medium is frequently air, but can also be water, refrigerants, or oil. If the fluid medium is water, the heat sink is frequently called a cold plate. When the airflow through the heat sink decreases, this results in an increase in the average air temperature. This in turn increases the heat sink base temperature. Additionally, the thermal resistance of the heat sink will also increase. The net result is a higher heat sink base temperature. Installation Method All you need to do is remove the heatsink protection and stick and place it on the raspberry pi. The heat sink has an adhesive film on the back that is easy to mount on the BGA chip by pressing it gently. The heatsink will stick to the BGA chip and cool it. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi Heatsinks online from Iotcart at the comfort of your homes.

5V Mini Fan for Raspberry Pi (30x7 mm) This 5V mini fan is very easy to use, it just needs to be powered up with a 5V power source. It has low current consumption and finds its application in a lot of projects like cooling of peltiers and heatsinks. This Cooling Fan for 3D Printer is a small but powerful fan. The cooling fan finds its use as an exhaust fan on the Raspberry pi case as well as 3D printers. It maintains the temperature of the extruder, which results in smooth printing. You can also use it to ensure that your Raspberry Pi is kept cool and running at optimal conditions when running heavy-duty operations. It can be directly connected to the 5v & GND pins of the Raspberry Pi and it will run whenever the Pi is turned on.  The cooling fan operates on 0.2A 5V DC power supply which can be easily powered from RPI board. It has a 2 pin JST connector to easily connect to the printer controller system, and provide hassle-free operation. The fan is made of plastic and is lightweight. It can also be used for other cooling applications like motor drivers that require heatsinks and rise to high temperatures which indirectly affects its overall efficiency. Applications: Cooling Raspberry Pi  Cooling of peltiers Cooling 3D printers Also check the Raspberry Pi 4 Official Case Fan, and the fan case is designed for Raspberry Pi 4 microcontrollers. The fan is temperature-controlled, delivering up to 1.4 CFM of airflow. The case includes a heatsink for improved heat transfer from the processor. Package Includes: 1 x 5V Mini Fan for Raspberry Pi Specifications Low noise 15.9-22.6dBA Airflow 4.56-7.32CFM Fan dimension 30 x 30 x 7 mm Cable length 1.5 metres Weight  5 grams

5V 0.2A 3010 Raspberry Pi Cooling Fan The 5V cooling fan can be connected to the Raspberry Pi setup to cool it when there is heat generated after usage for long hours. There are screws that are present with the fan that are useful in assembling the dc fan with the Raspberry Pi setup.  The cooling fan finds its use as an exhaust fan on the Raspberry pi case as well as 3D printers. It maintains the temperature of the extruder, which results in smooth printing. This fan is specifically designed for Raspberry Pi and can be mounted on some acrylic cases. The fan is useful for projects where heatsinks just aren't cutting it. Protect your hardware with a low power fan. The greatest feature of this fan is its low power consumption (20mA @ 5VDC). This fan attaches directly to the RPi GPIO and requires no additional power source or relay circuit.

200mm Aluminium Water Cooling Block The water cooling block is manufactured with aluminum and is designed with a 200mm dimension. It has internal extrusions for optimum internal flow. Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling. The 200mm water cooling block has a heavy aluminum build and has an extrusion for internal channel flow. Also check 240mm Aluminium Water Cooling Block available on the Iotcart website. The product is described as a high-quality cooling block head designed for efficient heat dissipation in various applications, including computer CPU water cooling, industrial inverter driver cooling, laser head cooling, and industrial control cabinet cooling. The cooling block is made of heavy-duty aluminum, features internal flow channel extrusion forming technology, Also check the 40mm Aluminium Alloy Water Cooling Block available on Iotcart. It is designed with high-quality aluminum alloy, featuring a solid construction for optimal heat dissipation. The block has internal flow channel extrusion and is compatible with water pipes of internal diameter 7-8mm (0.27-0.31''). PACKAGE INCLUDES: 1 x 200mm Aluminium Water Cooling Block Specifications: Material  Aluminium Alloy  Colour Silver Nozzle 9.5mm Internal fin thickness  0.5mm Type  Water Cooling Block  Size  200x40x12mm Weight  80 grams  Heat dissipation method The liquid conducts the cold and heat exchange

Raspberry Pi Model 4B Heat Sink The Aluminium Heat sink for Raspberry Pi is an aluminium heat sink kit that is used for cooling the chips microprocessor. The heat sink is attached with thermally conductive adhesive tape that helps in efficiently cooling the Pi. Why is it necessary? A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher temperature device to a lower temperature fluid medium. The fluid medium is frequently air, but can also be water, refrigerants or oil. If the fluid medium is water, the heat sink is frequently called a cold plate. When the air flow through the heat sink decreases, this results in an increase in the average air temperature. This in turn increases the heat sink base temperature. And additionally, the thermal resistance of the heat sink will also increase. The net result is a higher heat sink base temperature. Installation Method All you need to do is remove the heatsink protection and stick ot on the raspberry pi. The heat sink has an adhesive film on the back that is easy to mount on the BGA chip by pressing it gently. The heatsink will stick to the BGA chip and cool it. Note: Iotcart is the authorized seller of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi Heatsinks online from Iotcart at the comfort of your home.

3 in 1 Gold Aluminum Heat Sink for Raspberry Pi 4B The Aluminium Heatsink for Raspberry Pi is an aluminum heatsink kit that is used for cooling the chips microprocessor. The heat sink is attached with thermally conductive adhesive tape that helps in efficiently cooling the Pi. A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher temperature device to a lower temperature fluid medium. The fluid medium is frequently air, but can also be water, refrigerants or oil. If the fluid medium is water, the heat sink is frequently called a cold plate. When the airflow through the heat sink decreases, this results in an increase in the average air temperature. This in turn increases the heat sink base temperature. And additionally, the thermal resistance of the heat sink will also increase. The net result is a higher heat sink base temperature. Installation Method All you need to do is remove the heatsink protection and stick ot on the raspberry pi. The heat sink has a adhesive film on the back that is easy to mount on the BGA chip by pressing it gently. The heatsink will stick to the BGA chip and cool it. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi Heatsinks online from Iotcart at the comfort of your homes. Package Includes: 3 x Raspberry Pi 4B Heatsinks Heatsink Specifications Material  Aluminium  Colour  Gold Compatibility  Raspberry Pi 4 Model B Package Dimensions  5 x 4 x 3 Weight  25 grams

160mm Aluminium CPU Heatsink This is a 160mm Long Aluminium Water Cooling Block Liquid Cooler Waterblock Radiator-GPU CPU Cooling Heatsink.  The CPU heatsink has a solid construction and choosing aluminium as the raw material is a wise option for heat dissipation. The surface of the heatsink is treated by the method of silver oxidation. It is suitable for cooling graphics GPU, motherboard Northbridge Southbridge CPU, graphics; semiconductor cooling piece, industrial cooling, etc. The CPU heatsink is a water cooling block where the heat dissipation method of that the liquid conducts the cold and heat exchange.

80mm Aluminium CPU Heatsink This is an 80mm Long Aluminium Water Cooling Block Liquid Cooler Waterblock Radiator-GPU CPU Cooling Heatsink.  The CPU heatsink has a solid construction and choosing aluminium as the raw material is a wise option for heat dissipation. It is suitable for cooling graphics GPU, motherboard Northbridge Southbridge CPU, graphics; semiconductor cooling piece, industrial cooling, etc. The CPU heatsink is a water cooling block where the heat dissipation method that the liquid conducts the cold and heat exchange. Package Includes: 1 x 80mm Aluminium CPU Heatsink Specifications   Material  Aluminium  Nozzle  8 - 9.5MM Dimensions  80*40*10mm Weight  100 grams

3 in 1 Raspberry Pi Aluminium Heat Sink This is an aluminum heatsink kit used for cooling the chips on Raspberry Pi. Compared to another heat sink, it has been attached with thermal conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Besides, the installation is simple, what you need to do is to remove the heatsink protection and stick it on Raspberry Pi. Compatible with Raspberry Pi B. Installation Method All you need to do is remove the heatsink protection and stick it on the raspberry pi. The heat sink has an adhesive film on the back that is easy to mount on the BGA chip by pressing it gently. The heatsink will stick to the BGA chip and cool it. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi Heatsinks online from Iotcart at the comfort of your homes. Package Includes: 3 x Raspberry Pi heatsinks Specifications: Material  Aluminium Compatible  Raspberry Pi 3B Dimensions  4 x 4 x 3mm Weight 5 grams

Raspberry Pi 3 Camera Lamp This lamp for Raspberry Pi 3 Camera provides an additional focus that can be added to your night vision surveillance camera project using Raspberry Pi. The Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera features the Onboard photoresistor for the ambient light detection. Also, the Onboard adjustable resistor controls the ambient light threshold of toggling the infrared LED. This tiny infrared light perfectly fits with our Infrared IR Night Vision Surveillance Camera Module 500W Webcam. How to Use: Connect the Infrared LED Board to the camera PCB by screws. The screw holes are used for both attachment and power supply.  Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically. When ambient light is lower than the threshold value, the infrared LED is on, vice versa. Package Includes: 1 x Raspberry pi 3 Camera Lamp Set Specifications Compatibility  Raspberry Pi 3 Connectivity technology Infrared Screen size 1.1 Inch Dimensions 2.8 x 2 x 1.4 cm Weight  5 grams

Raspberry Pi Official Beginner's Guide Synopsis This official Raspberry Pi book is packed with guides containing all the information beginners need to get started using their new Raspberry Pi computer. Learn how to set up the Raspberry Pi, install an operating system, and start using it. Follow step-by-step guides to code animations and games, using both the Scratch and Python languages. Create amazing physical computing projects by connecting electronic components to the Raspberry Pi's GPIO pins. Add a tiny camera to capture photos and videos. About the Raspberry Pi A British-built, credit-card-sized computer, the Raspberry Pi is designed to help you learn coding, discover how computers work, and build your own amazing things. More than 22 million Raspberry Pi computers have been sold to date. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi Official Guide online from Iotcart at the comfort of your homes. Package Includes: 1 x Raspberry Pi Official Guide Specifications Brand  Raspberry Pi  Book Type  Raspberry pi Official Guide  Dimensions  15 x 8 x 2 cms  Weight  100 grams

Raspberry Pi USB Micro-B to USB-C Adapter The Raspberry Pi USB Micro-B to USB-C Adapter allows you to convert an existing micro USB power supply (like the into a USB-C power supply. Itt is designed to connect micro USB B type to Type C port devices like latest IoT Development Boards in robotics and DIY projects as well as for All latest Smartphones, Tablets and Laptops. This tiny adapter can solve the problem of buying and keeping different Charger/adapters for your C-type port gadgets. With the help of this converter, you can easily use your old Power supply with the Micro USB plug. It is simply plug and play converter. So no external driver or software installation needed. It works in both directions and supports high-speed data transfer speed for which C-type port is known. Note: Iotcart is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi USB micro b to usb c adapter online from Iotcart at the comfort of your homes. Package Includes: 1 x Raspberry Pi USB Micro-B to USB-C Adapter Specifications Brand  Raspberry Pi  Function  Micro USB to USB C Colour  Black Dimensions  1 x 0.5cms  Weight  5 grams