PT100  M6  Screw Probe Thermocouple Temperature Sensor (1 Meter) Pt1000 sensors are the second most common type of platinum resistance thermometer. Often resistance thermometers are generally called Pt1000 sensors. 1000 refers to that at 0°C sensors has a resistance of 1000 ohms (Ω). Pt1000 sensors are used over Pt100 sensors in two-wire applications as Pt1000s make lead resistance less significant. Pins: Red is Positive Blue is Negative Package Includes: 1 x PT100  M6  Screw Probe Thermocouple Temperature Sensor (1 Meter) Specifications: Type K-Type Model M6 Temperature Measurement Range:  32~1112°F (0-400°C) Thread Diameter 6mm  Length (cm) 100 Weight (gm) 40

3D Printer Temperature Detection Resistance NTC100K Thermistor Sensor Parts Hot Probe for High Temperature Filament (1 meter) This is Thermistor 100k NTC with 1 Meter Cable Temperature Sensor for 3D Printer Reprap. The thermistor is a thermally sensitive resistor known for exhibiting a large change in resistance with only a small change in temperature. The thermistor comes with a metal tip, making the temperature control more accurate, it will have a better thermal transfer and solve the problem of thermistor fixed unstable and the problem of easy damage. HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high-temperature line is double thicker than others in the market, not easy to break off. In 3D printers, the temperature and fine-tuning of printers are very important, as print quality can be greatly reduced if the temperature is not set correctly. The thermistor, a temperature sensor capable of withstanding temperatures above 200 degrees Celsius, is used to fine-tune the nozzle’s temperature and heat the device. In most RepRaps, a thermistor senses the temperature of the Hot End.  Package Includes: 1 x 3D Printer Temperature Detection Resistance NTC100K Thermistor Sensor Parts Hot Probe for High Temperature Filament (1 meter) Specifications: Cable Length 1 Meter Max power rating 45 mW Temperature Measuring Range (°C) −40°C to 270°C Accuracy 1% Diameter(mm) 2.37 Weight(g) 8

Thermistor Temperature Sensor HT-NTC100K- 2M NTC type temperature sensor 10K 1% with Two tinned copper wire cables consists of NTC element, SUS housing, two tinned wire cable, terminal, and temperature probe. The sensor is protected by a rubber or a stainless steel capsule, both waterproof. It is a proper solution for either heating or cooling applications. Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to solve the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and results in temperature fluctuation that can affect the printing quality. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended. Applications: Household air conditioner Solar water heater Refrigerator Stove Induction cooker Electric oven Home appliances Floor heating 3D printers Package Includes: 1 x Thermistor Temperature Sensor HT-NTC100K- 2M Specifications: Resistance value 10 KΩ Lead wire insulation PVC, PTFE, Silicon latex Fiberglass, rubber  Temperature measurement -50 ℃ - 320 ℃ Lenght  2m Weight 15 grams

K Type Thermocouple Probe Temperature Sensor 6mm Thread 1M 3.3Ft The 6mm K Type Thermocouple Probe is an excellent option for measuring high temperatures. Unlike normal sensors, which can only measure temperatures up to 150°C, this one can detect temperatures up to 200°C. It's ideal for industrial projects, 3D printers, and DIY projects that must withstand extreme temperatures. K-type thermocouples are tough and dependable. It measures temperatures by generating a tiny voltage proportional to the heat level, which can be read by suitable amplifier chips. This probe features an M6 thread, which makes it simple to mount and install. It is precise, sturdy, and ideal for temperature measurements. Package Includes: 1x K Type Thermocouple Probe Temperature Sensor Specifications: Feature Description Sensing Temperature 50 to 200°C Material High quality stainless steel Body Type Industrial grade, corrosion resistant Accuracy ±1.5°C Mounting Thread Diameter 8mm / 0.3in Sensor Probe Length 10mm / 1.2in Probe Diameter 5mm / 0.2in Connector 2pcs

K-type Temperature Thermocouple with Metal Shield Insulation (1 Meter) A Type K thermocouple refers to any temperature sensor containing Chromed and Alumel conductors, that meets the output requirements as stated in ANSI/ASTM E230 or IEC 60584 for Type K thermocouples. This may be an immersion sensor, a surface sensor, wire, or another style of sensor or cable. Temperature Sensor, Shielded K Type Thermocouple High Accuracy for Control. Whereas a J Type Thermocouple is made up of iron and constantan, K type Thermocouples are composed of a nickel/chromium alloy (chrome) and a nickel/aluminum alloy (alumni) which gives them much better protection against oxidation and acidity than the iron limbs of the Type J Type K consists of two metal alloys Chromel (90% Nickel, 10% Chromium) and also Alumel (95% Nickel, 2% Manganese, 2% Aluminium and 1% Silicon). Due to the thermocouple having a Nickel base; this means that it has good corrosive resistance-meaning that it can be widely used in many applications and situations. Also check Surface Thermocouple K Type High-Temperature Resistance Probe with a 1-meter cable. It has a temperature measuring range of 0 to 600 °C and features a K-type connector with an insulated wire. Packages Includes:  1 x K-type Thermocouple Specifications: Length 1 Meter Item Type K Type Thermocouple Model Probe type Probe Length 2in Measuring Range 0-400 degrees Celsius

Surface Thermocouple K Type High Temperature Resistance Probe (1 Meter) This is a great thermocouple wire with a K-Type sensor model TF-1. The sensor is at the tip of long wire probe, which has a durable fiber glass insulation.  It has a miniature type connector that will work with digital K-type thermometers. The surface thermocouple is designed with k type connector with an insulated wire. It can be used with k type digital thermometer to measure the temperature with 0 to 600 °C Range of air and gas. This probe can be used to measure air or gas temperatures, it can be attached to pipes or embeded into objects you want to measure. Also check the K-type Temperature Thermocouple (1 Meter) It has an operating voltage of 3 to 5.5 DC and is mainly used for temperature measurement. The thermocouple has a detection range from 0 degrees Celsius to 400 degrees Celsius. Package Includes: 1 x Surface thermocouple K type high-temperature resistance Probe Specifications: Temperature range 0 to 600 °C Color Yellow Connector Type K Type Cable length 1M Interface Type flat plug-in Interface Length 12.5MM Weight(g) 8

Type K Thermocouple(1M) for Industrial Equipment Business The Type K thermocouple is the most common type of thermocouple. It is made of nickel-chromium (Chromel) and nickel-aluminum (Alumel) and has a wide temperature range of 0℃ to 400℃. Type K thermocouples are used in a variety of applications, including industrial, commercial, and scientific.This thermocouple is compact and lightweight, making it easy to install and use. It is also durable and can withstand harsh environments. This thermocouple is made of high-quality materials and is built to last. It is resistant to corrosion and can withstand high temperatures. This thermocouple provides accurate and stable readings. It is also reliable and can be used in a variety of applications. This thermocouple is ideal for use in industrial equipment and business applications. It is accurate, reliable, and durable.This thermocouple is available in a 1M length, making it ideal for long-range applications. Features This is a precision type K thermocouple probe widely used for temperature measurement. It has fast response speed and stable performance. The thermocouple is resistant to high temperature, ranging from 0℃ to 400℃. High quality terminal connectors ensures convenient and stable connection. The probe of 5mm diameter is highly sensitive and can sense temperature fast. If you are looking for a reliable and accurate thermocouple for your industrial or business application, then the Type K Thermocouple is a great option. It is made of high-quality materials, is built to last, and provides accurate and stable readings. Also check the K Type Patch Surface End Face Thermocouple Cold Pressure Nose Probe PT100 Temperature Sensor SMD Round Hole Temperature Probe (1 Meter) available on Iotcart. It is a thermocouple sensor designed to work with display instruments, recording instruments, and electronic regulators as a temperature sensor. Package Includes: 1 x Type K Thermocouple(1M) for Industrial Equipment Business Specifications: Cable Length 1M Type K Screw Thread Diameter 8mm / 0.3in Probe Length 30mm / 1.2in Probe Diameter 5mm / 0.2in Temperature Range 0~400℃ Weight 30 gm

12V 40W Ceramic Cartridge Heater The 12V 40W ceramic cartridge heater consists of a cylindrical stainless steel tube and thus provide high corrosion prevention. The heating wire inside the ceramic cartridge heater is wound onto a ceramic core. The number of coils varies depending on the power and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures.  High quality, this heater cartridge for 3D printer can increase the reliability of your extruder and also heats up faster. It fits nicely in most extruders, being an easy replacement. Package Includes: 1 x 12V 40W Ceramic Cartridge Heater Specifications: Material 304 Stainless Steel Voltage 12V Power 40W Wire Length 1 meter Diameter of the wire 6mm Length of the steel 20mm Weight  50 grams

K Type Patch Surface End Face Thermocouple Cold Pressure Nose Probe PT100 Temperature Sensor SMD Round Hole Temperature Probe (1 Meter) The K Type Waterproof Thermocouple Sensor Probe features high-temperature resistance, with a temperature range from 0℃ to 400℃, so you don’t have to worry about the working performance of this Thermocouple Sensor Probe.  The K Type Corrosion Resistance Thermocouple Sensor has equipped with high quality terminal connectors, which can ensure a stable and tightly connection, and this Thermocouple Sensor Probe will be very convenient for your use. Also check PT100 M6 Screw Probe Thermocouple Temperature Sensor with a length of 1 meter. It is a K-Type thermocouple with a measurement range of 321112°F (0600°C). The sensor features a 6mm thread diameter and weighs 40 grams. It is designed for high measurement accuracy, medium interference resistance, and fast thermal response.  Also check Type K Thermocouple (1M) designed for industrial equipment business. It is made of nickel-chromium (Chromel) and nickel-aluminum (Alumel) with a temperature range of -200 to 1260°C (-328 to 2300°F). Package Includes: 1 x K Type Patch Surface End Face Thermocouple Cold Pressure Nose Probe PT100 Specifications: Type  K Type Measuring Range 32~752 °F (0~800°C) Cable Length 1 Meter Line Connecting Red to positive (+), Blue to Negative (-) Thickness of Washer  1.5mm

24V 40W Ceramic Cartridge Heater Wire The 24V 40W ceramic cartridge heater wire is specifically designed for RepRap and Prusa 3D printer models. The ceramic cartridge heater is integrated with a cylindrical tube that is made of stainless steel. The importance of the material used is that it provides greats resistance against corrosion. The ceramic heater wire is also equipped with a heating wire inside which is wound onto a ceramic core. It features a number of coils that provides uniform distribution of heat and improves the life and efficiency of the ceramic cartridge heater. Package Includes: 1 x 24V 40W Ceramic Cartridge Heater Wire Features of 24V 40W Ceramic Cartridge Heater Wire Material 304 Stainless Steel Voltage 12V Power 40W Wire Length 1 metre Diameter of the wire 6mm Length of the steel 20mm Weight  50 grams