FlySky FS-iA10B Radio Receiver- 2.4GHz 10 Channel Building on the previous FlySky iA6B receiver, FlySky is now providing a 10-channel version of the receiver called the FlySky FS-IA10B Radio Receiver. Like the FS-iA6B, the iA10B is capable of iBUS, SBUS, PPM, and PWM for enhanced control. The advantage of PPM / SBUS over traditional PWM channels is that you only need to use one signal wire, rather than one for each PWM channel hence for PPM-compatible flight controllers such as the Naze32, the wiring is greatly simplified. Furthermore, with the optional telemetry sensors, you can expand the receiver's compatibility to monitor flight battery voltage and even things like motor RPM.This full 10 channel receiver works for most models and is considered a full range so it can handle larger models as well as smaller ones. Dual antennas give the FS-iA10B for unparalleled reception (reported at well over 1km) and interference rejection capability. For best results, makes sure the antennas are set at a 90-degree angle from each other.The FS-iA10B is slightly larger than the FS-iA6B (see product pic), but it's still compact and it features end-on connectors to enable a neat installation in tight spaces. How to bind the RX (receiver) to the TX (transmitter): Plug bind plug into BAT, turn on plane/heli, the LED light should flash (make sure power is connected to RX via ESC) Hold down bind button on transmitter module while turning on the TX The light should go steady now Let go of bind button, turn off plane/heli, remove bind plug, turn off TX Turn on TX and then turn on plane/heli Compatible Radios: Flysky i4 Flysky / Turnigy i6 Flysky / Turnigy i10 Flysky FS-i10 FS-GT2E FS-GT2G Note: If you want to use PPM, remember to enable the setting on your transmitter. Package Includes: 1 x FlySky FS-IA10B Radio Receiver 1 x Bind Plug Specifications: Model FS-IA10B No. of Channels 10 No. of Band 140 Encoding GFSK. Modulation Type GFSK RF Range 2.40552.475 GHz. Rx Sensitivity (dBm) -105 Signal Output IBUS, PPM Operating Voltage (VDC) 4.0 ~ 6.5 Current Consumption (mA)       40 Control Distance 400m+ i-Bus Interface Yes Data Acquisition Interface Yes Antenna Gain 2dB Antenna Length (mm) 110 Color Black Net weight (gm) 15 Dimensions (mm) LxWxH 47 x 34 x 15

FlySky FS-CT6B 6ch 2.4GHz Transmitter & Receiver FlySky CT6B 2.4Ghz 6 Channel Transmitter with FS-R6B Receiver Remote is the popular 6 Channel Radio manufactured by FlySky.  This 6 Channel Transmitter and Receiver is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels.  This is a value-for-money, entry-level transmitter, ideal for quadcopters and multicopters that require a 6-channel operation. This radio has a very lightweight and handy design with two retract switches and proportional flap dials in easy reach for channels 5 and 6. It can be powered by 8 x AA Size Batteries or a 12V Power Supply. It comes with a trainer port to help beginners learn flying. This remote comes with an FS-R6B receiver which is one of the best receivers we had in the class at a very reasonable cost. It can be configured by connecting it to the computer. Use the T6 config software to configure your radio on a computer. check out : SKYDROID T12 2.4GHZ 12CH REMOTE CONTROL WITH CAMERA

FlySky FS-T6 6CH Transmitter with FS-R6B Receiver FlySky Introduces its newest 6-channel 2.4GHz system, The FS-T6. After years of success with the CT6B, FlySky presents the new FS-T6 with loads of cool and convenient features making the operation of this transmitter simple and instinctive. The 6-channel FlySky FS-T6 6CH Transmitter with FS-R6B Receiver is the perfect transmitter for sports modelers who want the power of a programmable transmitter but don’t necessarily need a lot of excess features they do not use. It includes all of the important features and programmable parameters to support a variety of helicopters, gliders, and airplanes. It even can store 20 models allowing the user to save a whole fleet of aircraft. When using a drone, a transmitter is one of the most important components. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver, which is connected to an aircraft or multirotor that is being remotely controlled. FlySky FS-T6 6CH Transmitter with FS-R6B Receiver Programming the FS-T6 is very easy and intuitive. It is implemented with a simple click and scroll dial allowing quick and easy menu navigation and manipulation. The large backlit LCD screen with large fonts is easy to read and the simplified menus will immediately put first-time programmers at ease. Many programming functions like throttle curves and expo are graphically depicted to give you a clearer picture of the changes you’re making.

FlySky FS-IA6B RF 2.4GHz 6CH PPM Output with iBus Port Receiver The FlySky FS-IA6B RF 2.4GHz 6CH PPM output with iBus port receiver works great with the FlySky FS-i6 Controller. This compact 6-channel receiver is great for any model using up to 6 channels and, with a range exceeding 500 meters, it can be considered to be the full range for all but the most demanding of applications. The receiver has end-on connectors to enable a neat installation in tight spaces. This has Fly Sky FS IA6B RF 2.4GHz 6ch PPM output with iBus port receiver built-in connectors which allows you to use any of the optional FlySky telemetry sensors. Dual antennas give the FS-iA6B excellent reception and interference rejection capability. With easy binding, compact dimensions, optional telemetry, and dual antennas. We have a range of such transmitters and receivers which are can be used to fulfill your unmanned vehicle requirements. Package Includes:  1 x Fly SkyFS IA6B RF 2.4GHz 6CH receiver. 1 x Bind Plug. Specifications: Model FS-iA6B Operating Voltage (VDC) 4.0 ~ 8.4V No. of Channels 6 No. of Band 140 Encoding GFSK. RF Range 2.4055–2.475 GHz. Rx Sensitivity (dBm) -105 Antenna Length (mm) 26 Video Format Supported NTSC/PAL Color Black Dimensions (mm) LxWxH 47 x 26.2 x 15 Net weight (gm) 14.9

Fly Sky FS-i6X 2.4GHz 6CH AFHDS 2A RC Transmitter With FS-iA10B 2.4GHz 10CH Receiver For improved control and accuracy, Iotcart is offering the Fly Sky FS-i6X 2.4GHz 6CH AFHDS 2A RC Transmitter and the FS-iA10B 2.4GHz 10CH Receiver. This combination will improve your experience with any radio-controlled model and is great for both novice and experienced RC model enthusiasts. Featuring FLYSKY’s second-generation AFHDS 2A (Automatic Frequency Hopping Digital System), this transmitter-receiver pair offers exceptional protection against interference, ensuring a stable and seamless connection. The AFHDS 2A technology is a market leader, providing lower power consumption for extended use and high receiver sensitivity for greater range and precise control. The Fly Sky FS-i6X combo is designed to be durable and is easy to operate, which makes it the perfect update for your RC system. Experience the excellent technology and reliable performance that distinguishes FLYSKY, and take your RC adventures to new heights with the Fly Sky FS-i6X and FS-iA10B, both available now at Iotcart. Key

FS-i6S Remote Control 2.4G 10CH AFHDS with FS-IA10B Receiver and Mobile Holder The FlySky FS-i6S Remote Control 2.4G 10CH AFHDS Transmitter with FS-IA10B Receiver’s new-look design comes with some exciting new features. This radio incorporates a monochrome backlight LCD touchscreen making it easy to program and make changes in sunlight or at night. There are two internal dual omnidirectional high gain antennas (for more reliability) built inside the frame so they can’t be damaged in transit. To help control your aircraft there are lots of programmable switches, buttons, and scroll wheels. Making them great for setting up flight modes and the scroll wheels could be used for controlling camera gimbals. The Premium design and look make you feel the class of the product and easy access to buttons in the right position and smooth operation and controls. All switches and scroll wheels are in easy reach and the adjustable length sticks can be set for comfortable use.  There is a loop for attaching a neck strap and a phone/monitor holder mounting point. There is even a mini USB port for easy connection to your PC for updates or for connecting (via USB) to your favorite simulator programs. Each transmitter and receiver has its own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems from accidentally connecting to or interfering with the system’s operation. Each transmitter hops between 16 channels in order to reduce interference from other transmitters.

FS-SM600 6CH USB Powered Controller with SuperSimX Simulator (Mode 2) The FlySky FS-SM600 6CH USB Controller makes it super simple to hook up a lifelike radio controller to your favorite RC Simulator. You only need to connect it to your computer, no other power source is needed. The controller is compatible with simulator programs like FPV Freerider, AeroFly, PhoenixRC 2.5, RealFlight G3.5, Reflex XTR, RealFlight G4, Clear View, and more. When using a drone, a transmitter is one of the most important components. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver, which is connected to an aircraft or multirotor that is being remotely controlled. It is an RC simulator that includes a radio / remote control, and a USB cable for the simulator. You just need to connect it to your computer, and you do not need another power source. This simulator offers several RC models (helicopters, airplanes, and gliders). This simulator offers good quality and physics to the model, which makes it more realistic and helps beginners learn how to fly with ease, greatly improving their skills. Steps to Install and Connect the Simulator: This controller has its own attached USB cable. You should have no need to purchase any 3rd party cable to operate. Before plugging in and turning on. Set the 4 position switch beside the front power switch to Reflex XTR Now connect to USB and switch the controller on. Ensure that your computer is detecting the device plugged in under the Device manager screen. If it is not ensured that all drivers are up to date including your computer controller drivers. Once confirmed, you can launch the game and go to “settings”,  “Choose new controller”, Go through the on-screen prompts to finish the setup. Note: we suggest 1.5% dead zone on this controller, you’ll find the option for this at the end of the calibration process. Note: Since this simulator is USB powered it does not require battery or AA Cells to power it. Package Includes: 1 x FS-SM600 Simulator radio with USB cable Specifications: Operating Voltage (VDC) 12 No. of Channels 6 Antenna Length (mm) 26 Certificate CE Code Type Digital Color Black DSC Port No Default Operating Mode Mode 2 (Left-Hand Throttle) Cable Length 1 Meter Dimensions (mm) LxWxH 180 x 220 x 70 Weight (gm) 527

Flysky FS-i6S 2.4GHz 10CH AFHDS 2A RC Transmitter With FS-iA10B 10CH Receiver Using a drone is easy but controlling a drone is a tough job that’s why a transmitter is needed. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver, which is connected to an aircraft or multirotor that is being remotely controlled. and Flysky is one of the popular brands that only manufactures a Diverse Range of high-quality Transmitters and Receivers at an affordable price The Flysky FS-i6S 2.4GHz 10CH AFHDS 2A RC Touch Control Transmitter With FS-iA10B 2.4GHz 10CH Receiver constitutes a 10-channel 2.4GHz AFHDS 2A digital proportional computerized RC System. Key

FlySky FS-GR3E 2.4G 3CH Receiver FlySky FS-GR3E 2.4G 3CH Receiver is a new function with a waterproof protection RC receiver, so now you could also enjoy your RC world when rainy or moisture days. The receiver is compatible with many transmitters like FS-GT2, FS-GT2B, FS-GT3B, FS-GT3C FZ-IT4S.  This 3 Channel receiver is very easy to bind very fast link-up, strong signal distance. Applications: Can be used with FlySky Transmitter Package Includes: 1 x Flysky FS-GR3E Receiver 1 x Antenna tube 1 x Bind Plug Specification: Number of channels 3 RF receiver sensitivity -105dBm Modulation GFSK System type AFHDS Resolution 1024 Power port Yes ( VCC ) Power supply 4.5 – 6.5V DC ( 4 x 1.5V AA battery, not included ) Dimensions in mm (LxWxH) 38 x 23 x 13 Weight (gm) 7

FlySky FS-i6 2.4GHz 6 Channel RC Transmitter The FlySky FS-i6 Rc transmitter with receiver is a great low-cost entry-level 6-channel 2.4 GHz Transmitter and Receiver that uses solid and reliable Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technology.  The drone remote controller has a nice quality look and feel, while also being simple to use. It comes with an FS-iA6 6-channel dual antenna receiver. It is suitable for controlling Quadcopters, Multirotors, RC Helicopters, and Airplanes. The FlySky is a superb budget RC transmitter for both new and experienced pilots alike!   The ultra-slim case design ergonomically fits your hands leading to less hand fatigue, especially during long flights. Digital trims, a backlit LCD screen, and simple programming give the transmitter a modern feel with all the features you want. With a low-profile antenna, the FlySky drone remote control is easy to store, and no worries about breaking it.  Adjustable length sticks and a loop for attaching a neck strap round out the list of comfort features this radio offers. For changing flight modes or multiple flap position options, the transmitter has a 3-position switch, as well as two adjustable knobs.   This Flysky FSi6 Remote Controller for DIY Quadcopter Expands the capabilities of your models or just knows what is going on with the optional telemetry receivers and a variety of sensors.  also check our drone transmitter and receiver collection, which offers a range of options with different features and price points.

FlySky FS-TH9X 2.4G 9CH Transmitter A transmitter is one of the most crucial parts while using a drone. Because it uses radio signals to communicate wirelessly with a Radio Receiver that is attached to an aircraft or multirotor that is being remotely controlled, you can't fly a multirotor without it. The flysky th9x range FS-TH9X 2.4GHz 9CH Upgrade Transmitter and FS-IA10B Receiver have completely changed how people experience RC, and they can now compete with the best products on the market. fs th9x  designed and domestically patented this Upgraded 9 channel with FS-RM003 2.4GHz Module TRANSMITTER'S AFHDS (automatic frequency hopping digital system) for all Radio Control model enthusiasts. The fs th9x system was specifically created for all radio control models because they have excellent active and passive anti-jamming capabilities, extremely low power requirements, and great receiver sensitivity. fs-th9x FLYSKY AFHDS is presently regarded as one of the top systems on the market after years of market research and extremely rigorous testing by engineers. The standard of the latest generation of radio systems flysky 9x is 2.4GHz because of its many benefits. By operating at 2.4 GHz, the radio control is kept out of the frequency range of any "noise" produced by the other electronic parts of your helicopters, such as the brushless motor, Electronic speed controller, Servos, and any metal-to-metal noise, which eliminates interference and glitching that can affect traditional frequency systems. FlySky is the brand name. FS-TH9X 2.4G 9CH Upgrade is the item name. 9 channels are available. Model types include cars, boats, helicopters, gliders, and quadcopters. 2.40 to 2.48GHz is the RF band. FlySky FS Transmitter works between 2.405 and 2.475GHz in frequency. Each radio system in this band uses 16 separate channels and 160 different types of hopping algorithms. This band has been broken into 142 independent channels. This radio system spans the entire frequency spectrum and has a high gain, high-quality multidirectional antenna. This radio system, when combined with a high sensitivity receiver, ensures jam-free long-distance radio communication. Each transmitter has a distinct ID, and when a transmitter and receiver are connected, the receiver stores the distinct ID and may only accept data from the distinct transmitter. By avoiding selecting a different transmitter signal, greatly improves safety and interference immunity. This radio system makes use of sensitive receiver chips and low-power electronic components. Even more, electricity is saved by the intermittent signal used in RF modulation. According to the needs of the customer, the AFHDS2A system's automated identification feature can convert the current mode automatically between one-way and two-way communication. How to bind the RX (receiver) to the TX (transmitter): Plug bind plug into BAT, turn on plane/heli, and the LED light should flash (make sure power is connected to RX via ESC) Hold down the bind button on the transmitter module while turning on the TX The light should go steady now Let go of the bind button, turn off plane/heli, remove the bind plug, and turn off TX Turn on TX and then turn on plane/heli Package Includes: 1 x FlySky FS-TH9X 2.4G 9CH Transmitter (Mode 2) 1 x FS-IA10B 2.4GHz Receiver 1 x FS-RM003 2.4GHz Module 1 x Bind Plug 1 x User Manual Specifications: Brand  Flysky  Dimensions  21 x 15 x 11 cms Weight  250 grams

FlySky FS-i4X 2.4GHz 4CH AFHDS R/C Transmitter with FS-A6 Receiver This FlySky FS-i4X 2.4GHz 4CH AFHDS R/C Transmitter + FS-A6 Receiver radio system uses a high gain and high-quality multi-directional antenna; it covers the whole frequency band. Associated with a high-sensitivity receiver, this drone transmitter and receiver guarantees a jamming-free long-range radio transmission.  This transmitter and receiver for drones supports AFHDS 2A which ensures 2 or more radios can operate at the same time without interfering with each other’s respective aircraft. Each transmitter has a unique ID when binding with a receiver, the receiver saves that unique ID and can accept only data from the unique transmitter, this avoids picking another transmitter signal and dramatically increases interference immunity and safety. With strong initiative and passive anti-interference ability and V-MIX mix control system this drone transmitter and receiver compatible with many models. According to your own needs, you can DIY expansion channel, this item can be expanded to 10CH. Works in the frequency range of 2.405 to 2.475GHz. This drone remote control brand has been divided into 140 independent channels. This transmitter and receiver for drone uses low-power electronic components and a sensitive receiver chip. The RF modulation uses intermittent signals thus reducing even more power consumption. AFHDS2A has built-in multiple channel coding and error correction, which improve the stability of the communication, reduce the error ratio, and extend the reliable transmission distance of flysky fs i4x drone remote controller.

Flysky FS-i10 10CH 2.4GHz AFHDS 2 LCD Transmitter with Receiver The Flysky Fsi10 remote controller is a great transmitter-receiver for quadcopter and drones. The Flysky transmitter receiver has a great ergonomic design and fits right in the palm of your hands. It is integrated with FS-ATM01, FS-APD02, FS-AVT01, FS-APD01, FS-AEV01 module. The Flysky drone remote controller has hardware that features 8 switches & 5 knobs for optimal performance. It uses the FLYSKY 2.4GHz AFHDS 2 to achieve the role of modern two-way communications telemetry. Model type uses for Drones, helicopter, airplane, and glider. Package Includes: 1 x Flysky FS-i10 Transmitter Reciever Specifications: Brand  Flysky Model  FS-i10 Number of Channels  10 Wireless frequency 2.4GHz Transmission power <20 dBm Range 500 ～ 1500m (in the air) Channel resolution 4096 Battery 1S * 1700mAh Simulator compatibility USB emulator Display WQGA 3.55-inch TFT color screen, 240 * 400 Data interface Micro-USB, PPM Colour  Silver Dimensions 190 x 95 x 255 mm Weight 720 g Certification CE, FCC: N4ZFLYSKYI10

Flysky FS-GT2 Transmitter with FS-GR3E Receiver for RC Car/Boat/Planes/Truck/Quadcopters When using a drone, a transmitter is one of the most important components. You can’t run any car/Boat without it because it uses radio signals to send commands wirelessly to a Radio Receiver, which is connected to an RC car that is being remotely controlled. FlySky FS-GT2 2.4GHz 2 Channel Digital Transmitter and Receiver Radio System come with many functions and features designed with the racer in mind, while still being easy to use, you are sure to be impressed with what the FS-GT2 has to offer. This Flysky transmitter and receiver is best for RC cars, boats, Planes, trucks, and quadcopters. Applications: RC Planes RC Car RC Boat RC Truck Quadcopters Package Includes: 1 x FS-GT2 2.4G Radio Controller 1 x FS-GR3C 2.4G Receiver 1 x Bind Plug 1 x User Manual Specifications: Operating Voltage (VDC) 12 No. of Channels 2 Antenna Length (mm) 26 Charging Port Yes Code Type Digital DSC Port Yes(3.5mm) Low Voltage Warning Yes(Less than 9V) Modulation Type GFSK RF Power Less Than 20 dBm Sensitivity (dBm) 1024 Dimensions (mm) LxWxH 159 x 99 x 315 Weight (gm) 365 (without battery)

FlySky FS-R6B 2.4GHz 6Ch Receiver The FlySky FS-R6B 2.4GHz 6Ch Receiver is a spare receiver module for the popular Flysky CT-6B Radio Receiver. It comes with a bind plug to bind the receiver to your transmitter. Flysky is one of the popular brands that only manufactures a Diverse Range of high-quality Transmitters and Receivers at an affordable price. Having a spare receiver will help you have a backup if the receiver you are using fails. It also helps if you are building multiple RC Models(Quadcopters, planes) and plan to use the same transmitter. Applications: RC Quadcopters Planes Robotics  Package Includes: 1 x FlySky FS-R6B 2.4G 6 Channel Receiver Specifications: Modulation Type 2.4G Modulation GFSK Difference Frequency  No Power  5V DC(1.5V AAA*4) Weight 25g Dimensions 30 x 25 x 8mm