4700uF 25V Electrolytic Capacitor  A 4700uF (microfarad) 25V electrolytic capacitor is a type of passive electronic component that stores electrical charge and is commonly used in electronic circuits for filtering, decoupling, and energy storage. It is called an electrolytic capacitor because it uses an electrolyte solution to store charge, which allows it to have a much higher capacitance than other types of capacitors. The voltage rating of 25V indicates the maximum potential difference (voltage) that the capacitor can safely handle without being damaged. Electrolytic capacitors have a few characteristics that make them different from other types of capacitors. They have a very high capacitance, which means they can store a lot of charge in a small size. They are also polarized, meaning that they have a positive and negative terminal and must be connected to a circuit in the correct orientation. Finally, they have a limited lifespan and may need to be replaced after a certain amount of time or number of charge/discharge cycles. Package Includes: 5 x 4700uF 25V Electrolytic Capacitor  Specifications: Capacitance 4700uF Voltage-Rated 25V Tolerance ±20% Size 16X30mm Temperature -40-+105°C.

0.1 uF 50V Ceramic Capacitor (Pack of 10) Ceramic capacitors are great for filtering out noise above 1KHz. Power spikes and other noise can cause all sorts of weird things to happen in your project so having a few of these should help quite a bit! This specific capacitor is rated at 0.1uF and 50V. Place these next to the VCC pin on all of your ICs to improve stability. These capacitors have a 0.100″ (2.54mm) spacing, meaning these work great with a solderless breadboard or protoboard. Package Includes: 10 x 0.1 uF 50V Ceramic Capacitor Specifications: Capacitance 0.1µF Tolerance ±20% Rated Voltage 50.0V Type Through-Hole Polarity Non-Polarised

220µF 25V Electrolytic Capacitor 220µF 25V capacitor is a high-quality electrolytic capacitor with long service life and reliability. In electronic circuits, electrolytic capacitors are the most commonly used capacitors. Electrolytic capacitors uses an electrolyte to achieve a higher capacitance than other capacitor types. An electrolyte is a liquid or gel that contains a large number of ions. Almost all electrolytic capacitors are polarized, which means the positive terminal voltage must always be larger than the negative terminal voltage. They are usually marked with a band on cathode side of the capacitor indicating the negative terminal. Package includes: 5 x 220µF 25V Electrolytic Capacitor  SPECIFICATIONS Capacitor Value 220µF Voltage 25V Type Polar Size 13x20mm Operating Temperature -40°C to 105°C Tolerance ±20% Mounting Type Through Hole

100KPF Ceramic Cap  A 100KPF ceramic capacitor is a type of capacitor that is made of ceramic material and has a capacitance value of 100,000 picofarads (pF). A capacitor is an electronic component that stores an electrical charge and is commonly used in circuits to filter out noise, smooth out voltage fluctuations, and store energy. Ceramic capacitors are popular for use in high-frequency circuits because they have a low loss tangent and good stability over a wide temperature range. The 100KPF ceramic capacitor is a relatively large-value capacitor and is typically used in applications where a moderate amount of capacitance is required. Applications: Used in High-frequency circuits Used in Power supply decoupling Used in timing circuits Used in Noise filtering circuits Used in Oscillator circuits Package Includes: 20 x 100KPF Ceramic Cap Specifications: Capacitance 100,000 pF Operating temperature -55°C to +125°C Voltage rating 50 volts or less Tolerance +20%/-20% Dielectric constant 3.9 to 9.3 Loss tangent 0.0004 or less Life expectancy 20 years or more Dimensions 1x1x2mm Weight 1g

Capacitor Box The Capacitor Box is a comprehensive kit that contains various capacitors with different capacitances. These electronic components store energy as an electrostatic field and can be utilized in several electronic circuits, including filtering out undesirable noise and producing time delays. When a capacitor is connected across a battery, a potential difference arises, causing positive charge +Q to accumulate on one plate and negative charge −Q to accumulate on the other plate. If a capacitor is charged sufficiently, no current can flow through it. Nevertheless, if a time-varying voltage is applied across the capacitor's leads, a displacement current can flow. A capacitor's capacitance is expressed as the ratio of the electric charge Q on each conductor to the potential difference V between them. This capacitor box contains 100 pieces, including 20 unique values, enabling you to experiment with various capacitance values. The Capacitor Box is available at the most reasonable price on Iotcart compared to other websites. Capacitors are commonly used in electronic circuits, power circuits, and power supply units. read more : What is Capacitor and how does it work? Key Features Radial leaded multilayer ceramic capacitor, coating by epoxy resin. Excellent humidity resistance, miniature size, wide capacitance, and reliable performance. Wide applications in computers, data processing, telecommunication, industrial control, etc. Packed in A Rugged Convenient Re-sealable Plastic Storage Case. Package Includes: 1 x Capacitor Box  Specifications Box Name  Capacitor Box  Dimensions  11 x 5 x 3cms  Weight  100 grams