CNC Shield + UNO R3 Board compatible with Arduino + 4xDRV8825 Driver Kit Arduino Uno is an open-source microcontroller used by students and hobbyists entering the world of DIY electronics and automation, The Arduino Uno can be used for any application including being the brains of your next DIY 3D printer and/or CNC router The CNC Shield V3.0 allows you to build an engraving machine, 3D printer, mini CNC and other similar devices using your Arduino. It is designed as a shield and can plug on top of an Arduino requiring no external connections and wiring. Along with that, the CNC shield allows you to control up to four stepper motors by mounting on 4 stepper motor drivers, included with this kit The DRV8825 provides an integrated motor driver solution for printers, scanners, and other automated equipment. The device has two H-bridge and is intended to drive a bipolar stepper motor.

Robotics Intermediate Kit This is a 48 items Arduino Uno Compatible RFID Kit. This kit consists of a total of 119 items.  This Arduino Kit focuses on DIY RFID-based projects for beginners. With this RFID Starter Kit, you can learn how RFID key and receiver work, how to use the RFID system to do security checks, and how to control and communicate with other devices such as LCDs, LEDs, servo motors, and keypads.  Package Includes: 1 x UNO R3 Compatible to Arduino 1 x RC522 RFID Module 1 x RFID ID Round Tag 1 x RFID ID Card 1 x Ultrasonic distance sensor 1 x ADXL345 Acceleration Sensor 1 x Servo Motor 1 x PS2 Joystick Module 1 x IR receiver HX1838 1 x Remote controller 1 x Dot Matrix Display 1 x 74HC595 1 x DHT-11 Temperature and Humidity Sensor 1 x DC Motor 1 x L293D motor driver IC 1 x Relay 1 x 16x2 LCD Display 1 x 7-Segment Display 1 x Four-digit segment display 1 x Buzzer 2 x Thermistor 2 x Photoresistor 1 x LED bar graph 1 x 4x4 Matrix Keyboard 2 x Switch 5 x RGB LED 5 x Red LED 5 x Green LED 5 x Yellow LED 5 x Blue LED 1 x Resistor Box 5 x Capacitor 0.1uF 5 x Capacitor (10uF) 5 x Button (large) 5 x Button (small) 3 x NPN Transistor (8050) 3 x PNP Transistor (8550) 2 x Potentiometer (10k Ohm) 3 x 1N4148 Diode 3 x 1N4001 Diode 1 x Battery holder 1 x Breadboard 120 x Jumper Wire (40 Male to Male, 40 Male to Female , 40 Female  to Female )  1 x Header (40pin) 1 x Manual  Specifications: Development Board  Arduino Compatible Board No. of Items 48 RFID Operating Voltage 3.3VDC RFID Operating Frequency 13.56MHz Microcontroller ATmega328P Uno Pins 14 Digital Pins (of which 6 provide PWM output) and 6 Analog Pins

UNO 21-in-1 Starter Kit compatible with Arduino This is a 21-in-1 starter kit based is validated on Arduino but other microcontrollers can be used as well. This UNO starter kit contains all the necessary electronic components to get started with the UNO board, Arduino, and embedded systems. All the sensors included in the kit are of good quality and are compatible with Arduino. The Arduino Starter kit will help you get started in the world of electronics and embedded system programming. This kit is aimed at beginners and intermediates and can be used to jump-start your growth and learning towards DIY electronics and embedded system. This UNO starter kit is useful for students and hobbyists to test and prototype their electrical projects. Engineering students can buy UNO basic starter kits online to develop and build their final semester projects. Uno SMD: The Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.  Breadboard: A breadboard allows for easy and quick creation of temporary electronic circuits or to carry out experiments with circuit design. Battery cap: The Battery caps serve two purposes; they permit the checking and maintenance of water and acid levels and provide a vent for the escape of gases formed when the battery is charging. Resistor Box: The resistance box is an instrument for measuring and comparing electrical resistances. Capacitor: A capacitor is a passive two-terminal electrical component used to store energy electrostatically in an electric field. Jumper Wires: Male ends have a pin protruding and can plug into things, while female ends do not and are used to plug things into. Male-to-male jumper wires are the most common and what you likely will use most often. Transistor: A transistor is a device that regulates current or voltage flow and acts as a switch or gate for electronic signals Button Switch: A button switch is a type of switch which consists of a simple electric mechanism or air switch mechanism to turn something on or off. Buzzer: A buzzer or beeper is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric (piezo for short). LDR: An LDR (Light Dependent Resistor) is a component that has a (variable) resistance that changes with the light intensity that falls upon it. This allows them to be used in light sensing circuits. Light Dependent Resistors (LDR) are also called photoresistors. SEVEN-SEGMENT DISPLAY: A seven-segment display is a set of seven bar-shaped LED (light-emitting diode) or LCD (liquid crystal display) elements, arranged to form a squared-off figure 8. A few seven-segment displays use other illumination devices, such as incandescent or gas-plasma ("neon") lamps. PIR Motion Sensor Module: PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. PIRs are basically made of a pyroelectric sensor, which can detect levels of infrared radiation. 16X2 LCD MODULE: The 16x2 Alphanumeric LCD Display Module is equally popular among hobbyists and professionals for its affordable price and easy-to-use nature. As the name suggests the 16x2 Alphanumeric LCD can show 16 Columns and 2 Rows therefore a total of (16x2) 32 characters can be displayed. Each character can either be an alphabet or number or even a custom character.  Check out our entire range of DIY Kits Compatible with Arduino Pinout for Arduino Uno Arduino Uno Pinouts Applications: Home Automation System Security System IoT based projects DIY Projects Package Includes: 1 x UNO SMD Board compatible with Arduino 1 x Breadboard 5 x LED 1 x LDR 1 x 16 x 2 LCD 40 x Connecting Wires (male to male and male to female) 1 x 5V Relay 5 x Button Switch 1 x Resistance Box 1 x Capacitor Box 5 x BC548 NPN Transistor 1 x PIR Motion Sensor Module  1 x Buzzer 1 x 9V Battery 1 x Connecting Cap 1 x 7805 Voltage converter 2 x Potentiometer (100ohm, 10kohm) 1 x Toy Motor (2000 RPM) 1 x L293D IC 1 x Seven Segment Display(Common Cathode) 1 x USB cable Specification: Microcontroller  ATmega328 Digital I/O Pins of uno 14 Analog Inputs of uno 6 Crystal Oscillator Frequency of uno 16MHz Operating Voltage of uno 6-20V Dimensions of uno 7 x 5 x 1cms Weight of uno 10 grams

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328. It is compact in size, suitable in many applications where space comes at a premium. It has 22 GPIO pins, 8 of which are analogue pins. It supports commonly used communication protocols such as UART, SPI and I2C A 16x2 LCD display is a very basic module and is very commonly used in various integrated devices and circuits. A 16x2 LCD means it can display 16 characters per line and there are 2 such lines In addition to the above two components, there are many more components such as motors, buzzer, LED, Keypad, etc that can help you get started in integrating various sensor to make a complete DIY solution Package Includes: 1 x Nano Board compatible with Arduino 1 x Servo Motor 1 x 4 x 4 Matrix Keypad 1 x USB cable 1 x 16 x 2 LCD 4 x Buzzer 1 x DC Motor 1 x RGB LED 1 x LDR 1 x 5v 1ch Relay 1 x Set of Jumper Wire Pinout for Arduino Nano Applications of this Kit This Nano board Compatible Ultimate Starter Kit is great for absolute beginners. The starter kit for Arduino users comes with a number of components comprising of various sensors and actuators helping you get started on simple concepts on how to display data on LCD, control motors using the keypad, control appliances using a relay, etc.

UNO DIY Line Follower Kit Compatible with Arduino This is UNO DIY Line Follower Kit or Line follower robot, as the name implies, It is an automated vehicle that follows a visual line embedded on the surface. This visual line represents the path that the line follower robot will take. It usually uses a black line on a white background, but you can change it to a white line on a black background. This type of line follower robot using arduino is typically used by beginners and students to gain their first robotic experience. Giant line follower robots are used in industries to aid in the automated production process. They are also used in military applications, humanitarian aid, delivery services, and so on. Working: This line follower robot using arduino is a simple Microcontroller-based car with two infrared sensors. These sensors determine whether the line colour is reflective or not. In this case, reflection means that the surface reflects the light. The White surface is the reflective surface in this case. (Only the black lines have a non-reflective surface.) This means that black tracks do not reflect any light. The sensor detects whether or not there is any reflective light coming back. Only the sensor will provide an output (there are two types of output). I'll get to that later). And if there is no reflection, the IR sensor will not produce any output, or the output will be low. The microcontroller ( Arduino UNO) can control the car based on the High and Low Output results. The microcontroller ( Arduino UNO) instructs the car on where to go, when to turn (left or right), and where to stop. This line follower robot using arduino consists of arduino UNO with cable , Motor driver shield for arduino , IR sensors , Base board , DC motors, Battery container, wheels , Jumper wires , Encoder disc, Switch , Hammer castor, spacers and screws  check out : RF controlled BOT Pinout for the Arduino Uno: Arduino Pin Diagram   DIY Line Follower Robot Instructions   Applications: Line follower Robot Obstacle Avoider Robot Maze solving Robot Smart parking Package Includes: 1 x UNO Board compatible with Arduino 1 x USB cable 1 x L293D shield 4 x IR sensor 1 x 2WD robot chassis 2 x BO motors (200 RPM) 2 x BO Motor Wheels 1 x Battery holder 1 x Caster wheel 10 x Jumper(M-M, M-F, F-F) 1 x Screw and nut set for assembly Specifications: Microcontroller ATmega328  Input voltage 7-12V Clock speed  16MHz Flash Memory 32K IR sensor distance measuring range 2-30cm Shield Motor driver shield Motor driver shield model L293D IR sensor man chip LM393 Kit weight  380gm

ADIY UNO KIT FOR BEGINNERS ( Make in India Boards) ADIY Uno R3 Beginners Kit is the perfect solution for individuals keen on learning about electronics and creating hands-on projects. This comprehensive starter kit includes 18 sensor modules, such as IR Sensor, Buzzer, DHT11, and more, ensuring endless possibilities for exploration and learning. The kit features the user-friendly ADIY Uno DIP R3 – Compatible (CH340C), fully compatible with Arduino UNO, allowing seamless programming for beginners. The kit guarantees the highest quality and durability. The user-friendly design, along with tutorial videos, makes it easy for beginners to get started with Arduino programming. Ideal for students and enthusiasts, this kit is a DIY solution for innovators looking to delve into the world of electronics.

UNO Robotics Kit compatible with Arduino The Arduino basic Starter kit will help you get started in the world of electronics and embedded system programming. This kit is aimed at beginners and can be easily obtained to get you started with DIY electronics Arduino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button This UNO board starter kit is useful for students and hobbyists to test and prototype their electrical projects. Engineering students can buy UNO basic starter kit online to develop and build their final semester projects. Pinout for Arduino Uno Pin Diagram of Arduino Uno Applications: DIY Projects: This Arduino Uno kit can be used in making fun projects like Keypad operated door lock, ,DIY Calculator etc. Package Includes: 1 x UNO Board compatible with Arduino 1 x USB cable 1 x 4x4 Matrix Keypad 1 x 16x2 LCD Display 1 x Set of Jumper Wires Specifications: Supply Voltage  DC Microcontroller ATmega328P Weight 200g

UNO Basic Starter Kit compatible with Arduino Arduino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header and a reset button This UNO board starter kit is useful for students and hobbyists to test and prototype their electrical projects. Engineering students can buy UNO basic starter kit online to develop and build their final semester projects. Package Includes 1 x UNO Board compatible with Arduino 1 x USB cable 1 x Breadboard 1 x Bundle breadboard jumper cable 1 x Resistor box 5 x Red 5mm LED 5 x Green 5mm LED 5 x Yellow 5mm LED 5 x Blue 5mm LED   Pinout for Arduino Uno Applications of this Kit The Arduino basic Starter kit will help you get started in the world of electronics and embedded system programming. This kit is aimed at beginners and can be easily obtained to get you started with DIY electronics  Specifications: Development Board  Arduino Compatible Board No. of Items 25 Microcontroller ATmega328P Uno Pins 14 Digital Pins (of which 6 provide PWM output) and 6 Analog Pins

Grove Beginner Kit for Arduino (Arduino Compatible Board with 10 Sensors and 12 Projects) The Grove beginner kit for arduino is an all in arduino compatible kit that helps you learn hardware knowledge, programming code, connection methods of various complex interfaces easy and fun. This is one of the simplest ways to get started with arduino.  The kit is powered by one Arduino compatible Board (Seeeduino Lotus) together with 10 additional Grove Arduino sensors all in one piece of the board. All the modules are already connected to the board compatible with arduino through the PCB stamp holes. This is perfect for educational fields where frustrating wiring and soldering is no longer needed. About Grove Grove is a type of connection where no soldering or jumper wires are needed. It makes it easier to connect experiment, and simplify the prototyping process.  Applications Suitable for Arduino beginners. Suitable for STEAM teaching. Suitable for getting started with open-source hardware and Arduino coding. Note: The Grove beginner's kit is of the size: 17.5 x 10.5 x 3 cms and weighs about 100 grams Package Includes 1 x Grove Beginner Kit For Arduino Board 1x Micro USB Cable  1x Grove Cables  Grover Beginner Kit Included Components Grove - LED x 1 Grove - Buzzer x 1 Grove - OLED Display 0.96" x 1 Grove - Button x 1 Grove - Rotary Potentiometer  x 1 Grove - Light  x 1 Grove - Sound  x 1 Grove - Temperature & Humidity Sensor x 1 Grove - Air Pressure Sensor x 1 Grove - 3-Axis Accelerator x 1 Seeeduino Lotus x 1